Infineon

TLE7250GVIOXUMA1 - 1 Mbps CAN Transceiver | Infineon

MPN: TLE7250GVIOXUMA1 ✓ Hoạt động
PG-DSO-8 Package Low EME Memory
MOQ: 1 |

TLE7250GVIOXUMA1 Tóm tắt

Infineon Technologies TLE7250GVIOXUMA1 is a high-speed CAN transceiver for Controller Area Network communication, supporting operation up to 1 Mbps and compliance with ISO 11898-2. It is a one-channel, one-receiver CAN bus transceiver in an 8-pin PG-DSO-8 surface-mount package. The device is designed for automotive CAN networks, where low electromagnetic emissions and high immunity to external interference help preserve communication reliability.

A CAN transceiver is an interface IC that connects a host controller's logic-level TX and RX signals to the differential CAN bus. This signal-conditioning stage converts the controller's transmit command into a dominant or recessive bus state and converts bus differential voltage into a receive signal. It belongs to the CAN transceiver hierarchy, which combines interface IC, automotive communication, and physical-layer network components.

The TLE7250G family is characterized by high-speed CAN operation, low EME, and high EMI resistance. Its PG-DSO-8 package supports compact surface-mount PCB layouts, while the standardized 8-pin arrangement permits comparison with compatible CAN transceivers. According to Infineon, the TLE7250GVIO pin assignment and functions are fully compatible with the preceding TLE6250GV33, providing a useful compatibility reference for legacy designs.

TLE7250GVIOXUMA1 is appropriate for automotive ECUs, body-control modules, powertrain controllers, gateway electronics, and industrial CAN systems that use ISO 11898-2 networks. Its 1 Mbps capability suits communication links requiring substantially more bandwidth than low-speed CAN while retaining standardized differential signaling and robust emission and immunity behavior.

Designers should follow the Infineon datasheet for the exact supply limits, pin states, receiver thresholds, bus fault behavior, and external-component recommendations. CAN bus layouts also depend on termination, topology, routing, and protection requirements. A properly terminated network using 120-ohm branches and suitable surge protection is more reliable than isolated component substitution without a complete compatibility review.

This page combines manufacturer product information, verified distributor records, package details, interface characteristics, and drop-in alternatives. It also identifies engineering trade-offs among compatible Infineon devices so that PCB reuse, firmware expectations, automotive qualification, and CAN bus performance can be considered before procurement.

Bộ thay thế dễ dàng lắp đặt cho TLE7250GVIOXUMA1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TLE7250GVIOXUMA1 (cùng hình factor và footprint) — khác nhau ở Product Type, Package, RoHS Status, Automotive Qualification, Supply Voltage Range.

Infineon
Product Type: CAN bus transceiver
RoHS Status: RoHS compliant green product
Automotive Qualification: AEC-Q100
So sánh với TLE7250GVIOXUMA1 →
Infineon
Package: SOIC-8
Automotive Qualification: AEC-Q100 qualified
Supply Voltage Range: 4.5 V to 5.5 V
So sánh với TLE7250GVIOXUMA1 →
Infineon
Product Type: CAN Transceiver (Physical Layer Interface)
Package: PG-DSO-8-16 / 8-SOIC (0.154 in, 3.90 mm width)
RoHS Status: RoHS3 compliant
So sánh với TLE7250GVIOXUMA1 →
Infineon
Product Type: 1/1 CAN bus transceiver
Supply Voltage Range: 4.5 V to 5.5 V
So sánh với TLE7250GVIOXUMA1 →

TLE7250GXUMA1

✅ Drop-In
Infineon
📦 PG-DSO-8
1/1 CAN bus transceiver · ISO 11898-2 · 1 Mbps · 4.5 V to 5.5 V · 1 · 1 · PG-DSO-8 · 8-pin SOIC, 0.154 inch, 3.90 mm width

Liên hệ để biết giá

Xem tài liệu →

TLE7250GVIOXUMA1

✅ Drop-In
Infineon
📦 PG-DSO-8
High-speed CAN transceiver · 1 CAN channel · 1 transmitter and 1 receiver · 1 Mbps · ISO 11898-2 · PG-DSO-8 · 8-pin surface-mount SOIC · 8

Liên hệ để biết giá

Xem tài liệu →

TLE7250G

✅ Drop-In
Infineon
📦 PG-DSO-8
High-speed CAN transceiver · 1 Mbps · 4.5 V to 5.5 V · ISO 11898-2 · SOIC-8 · 8 pins · CANH and CANL · Low EME

Liên hệ để biết giá

Xem tài liệu →

TLE6250GV33XUMA1

✅ Drop-In
Infineon
📦 PG-DSO-8
CAN bus transceiver · 1/1 half-duplex transceiver · 1 Mbit/s · 12 V to 24 V · 3.3 V to 5 V · 70 mA · 12 V and 24 V automotive battery systems · Normal mode and standby mode

Liên hệ để biết giá

Xem tài liệu →

TLE7250GVIOXUMA2

✅ Drop-In
Infineon
📦 PG-DSO-8
CAN Transceiver (Physical Layer Interface) · 1 Mbps · 1 / 1 · Half · CANbus (ISO 11898-2) · 4.75 V to 5.25 V · 3.3 V or 5 V · 100 mV

Liên hệ để biết giá

Xem tài liệu →

TLE7250GVIOXUMA1 Thông số kỹ thuật

Product Type High-speed CAN transceiver
CAN Interface 1 CAN channel
Transceiver Configuration 1 transmitter and 1 receiver
Maximum Data Rate 1 Mbps
Compliance ISO 11898-2
Hộp PG-DSO-8
Package Type 8-pin surface-mount SOIC
Number of Terminals 8
Package Width 4 mm
Package Shape Rectangular
Terminal Form Gull wing
Electromagnetic Emissions Low EME
Electromagnetic Immunity High EMI resistance
Trạng thái RoHS Compliant
Automotive CAN Application Yes
Predecessor Pin Compatibility Compatible with TLE6250GV33

Hướng dẫn cấu hình chân TLE7250GVIOXUMA1 rectangular

Cấu hình chân cho TLE7250GVIOXUMA1 (rectangular gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân rectangular cho TLE7250GVIOXUMA1

Không có dữ liệu chân cụ thể sẵn có cho TLE7250GVIOXUMA1.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

TLE7250GVIOXUMA1 phù hợp cho 6 Áp dụngs: Automotive Electronic Control Units, Body-Control Module Networking, Powertrain and Chassis Control, Automotive Gateway Controllers, Industrial CAN Control Systems, CAN Diagnostics and Test Equipment.

🚗

Automotive Electronic Control Units

The TLE7250GVIOXUMA1 fits automotive electronic control units that connect a CAN controller to a differential CAN bus. Its 1 Mbps high-speed capability provides bandwidth for real-time control data, while the TLE7250G family's low EME and high EMI resistance are valuable in vehicles where switching equipment and external harnesses can disturb communications. The PG-DSO-8 package supports compact surface-mount designs. Confirm the device's exact supply and temperature limits in the Infineon datasheet before production release.

🚗

Body-Control Module Networking

A body-control module can use the TLE7250GVIOXUMA1 to connect door, lighting, climate, and centralized locking functions to a CAN network. The 1 Mbps ISO 11898-2 interface supports higher messaging throughput than low-speed CAN, helping the controller exchange diagnostic and control frames efficiently. Its 8-pin PG-DSO-8 footprint simplifies compact board construction. Network validation should include termination, fault injection, EMC testing, and operating-temperature checks.

🏭

Powertrain and Chassis Control

The TLE7250GVIOXUMA1 is applicable to powertrain or chassis-control modules where fast, dependable CAN communication is needed for sensor fusion and actuator commands. Operation up to 1 Mbps supports time-sensitive frames, and high EMI resistance is advantageous in electrically aggressive automotive environments. Because the bus network determines overall reliability, use the manufacturer reference configuration, provision appropriate protection, and verify behavior during dominant-state, recessive-state, short-circuit, and thermal fault tests.

🌐

Automotive Gateway Controllers

A CAN gateway controller can use the TLE7250GVIOXUMA1 for a high-speed CAN-facing interface that links vehicle domains and aggregates diagnostic traffic. The 1 Mbps capability accommodates the traffic levels expected of modern distributed architectures, while low EME helps limit bus disturbance. The small PG-DSO-8 surface-mount package leaves board area for processing and isolation circuitry. Check pin states, bus fault handling, and exact temperature qualification against the installed gateway design.

🏭

Industrial CAN Control Systems

The TLE7250GVIOXUMA1 can interface an industrial controller to a 1 Mbps ISO 11898-2 CAN network used for machinery, remote I/O, or process-control equipment. Its high EMI resistance and low emissions help maintain reliable differential signaling in industrial cabinets containing variable-speed drives and switching power supplies. The device is also available in a compact PG-DSO-8 package for space-constrained control boards. Confirm supply limits, grounding, isolation strategy, and the applicable industrial temperature grade.

🔧

CAN Diagnostics and Test Equipment

The TLE7250GVIOXUMA1 is suitable for diagnostic adapters, CAN interface modules, and test equipment that need to observe or participate in a 1 Mbps CAN network. ISO 11898-2 compatibility places it within a standard controller-area-network ecosystem, while low EME and high EMI resistance support use near electrically active test equipment. Use the exact pin description to connect TXD, RXD, supply, ground, and bus pins, and validate the complete interface under shorted-bus and high-load conditions.

What is the TLE7250GVIOXUMA1?
The TLE7250GVIOXUMA1 is an Infineon Technologies high-speed CAN transceiver in an 8-pin PG-DSO-8 package. According to the Infineon TLE7250G product page, it supports CAN operation up to 1 Mbps, complies with ISO 11898-2, and is designed for low electromagnetic emissions and high electromagnetic-immunity environments. It provides one transmitter and one receiver for a single differential CAN channel.
What are the key specifications of TLE7250GVIOXUMA1 that engineers should know?
The TLE7250GVIOXUMA1 is a one-channel high-speed CAN transceiver rated for operation up to 1 Mbps under ISO 11898-2. It is housed in an 8-pin PG-DSO-8 surface-mount package measuring 4 mm wide. Infineon identifies low EME and high EMI resistance as principal family characteristics, making the device relevant to automotive networks and other electrically demanding CAN installations.
What is the maximum CAN data rate of TLE7250GVIOXUMA1?
The TLE7250GVIOXUMA1 supports a maximum CAN data rate of 1 Mbps. According to the Infineon TLE7250G product information, this is a high-speed ISO 11898-2 transceiver. The maximum rate depends on the complete network, including controller timing, cable characteristics, termination, topology, and electromagnetic environment, so an operating margin should be maintained during system validation.
Where can I download the TLE7250GVIOXUMA1 datasheet PDF?
The official Infineon TLE7250G product page provides access to the family datasheet and ordering information for the TLE7250GVIOXUMA1. Start at https://www.infineon.com/part/TLE7250G and select the datasheet document listed for TLE7250G. Use its pin-description table, electrical characteristics, and application guidance when assigning PCB tracks and defining the CAN network.
Where can I find the TLE7250GVIOXUMA1 pinout?
The TLE7250GVIOXUMA1 pin assignment is documented in the Infineon TLE7250G family datasheet linked from https://www.infineon.com/part/TLE7250G. The component uses eight PG-DSO-8 pins for the CAN bus, logic interfaces, and device functions. Assign every PCB connection directly from the manufacturer pin-description table rather than inferring connections from another CAN transceiver.
Is the TLE7250GVIOXUMA1 compatible with TLE6250GV33?
Yes. Infineon states that the TLE7250GVIO pin assignment and functions are fully compatible with the preceding TLE6250GV33. This compatibility is specific to the identified predecessor relationship and should be confirmed against voltage ratings, operating-temperature limits, bus-fault behavior, and the exact package suffix before approving it as a maintenance replacement.
Where to buy TLE7250GVIOXUMA1 online?
Use the Request a Quote form on this page to request TLE7250GVIOXUMA1 pricing, stock confirmation, and current lead time. The part is an Infineon Technologies 1/1 half-CANbus transceiver in PG-DSO-8, and verified product listings identify it as TLE7250GVIOXUMA1. Quote requests allow the exact suffix, quantity, and delivery requirements to be checked before an order is placed.
What is the price of TLE7250GVIOXUMA1?
Submit a TLE7250GVIOXUMA1 request through the Request a Quote form on this page for a current price tied to the required quantity. Because component pricing and availability can change with market conditions, the price should be confirmed for the exact PG-DSO-8 ordering code rather than relying on a generic family or package price.
What is the lead time for TLE7250GVIOXUMA1?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, production scheduling, and the requested delivery location. Providing the exact quantity and target date allows the order channel to confirm the most relevant schedule for TLE7250GVIOXUMA1.
Is TLE7250GVIOXUMA1 in stock?
Use the Request a Quote form on this page to request a current stock check for TLE7250GVIOXUMA1. Because availability can change after a quote is prepared, confirm the quantity and required delivery date directly with the order channel. Verify that the quotation identifies the complete TLE7250GVIOXUMA1 suffix and PG-DSO-8 package.
What can replace TLE7250GVIOXUMA1?
Compatible alternatives include same-family Infineon devices listed on this page, subject to package and electrical verification. The strongest compatibility reference is TLE6250GV33 because Infineon explicitly identifies the TLE7250GVIO pin assignment and functions as compatible with that predecessor. Other variants may differ in package code, temperature grade, or ordering suffix, so review the manufacturer documentation before substitution.
Is TLE7250GVIOXUMA1 the same as TLE7250GXUMA1?
The TLE7250GVIOXUMA1 and TLE7250GXUMA1 are closely related Infineon TLE7250G-family devices, but their complete ordering codes should not be treated as automatically interchangeable. Review the exact package, temperature, lead-time, and electrical details in the Infineon ordering information. If PCB reuse is required, verify the PG-DSO-8 footprint and all eight pin functions before substitution.
When should I choose TLE7250GVIOXUMA1 over another CAN transceiver?
Choose TLE7250GVIOXUMA1 when the design requires a 1 Mbps ISO 11898-2 CAN interface in the PG-DSO-8 package and prioritizes low EME and high EMI resistance. Select another compatible family member when its package, temperature grade, or ordering suffix better matches the production variant. If a competitor is considered, require verified pin compatibility and a complete electrical and automotive-qualification review.
Is TLE7250GVIOXUMA1 suitable for automotive ECUs?
The TLE7250GVIOXUMA1 is suitable for CAN-based automotive electronic systems that operate within the device's specified electrical and temperature limits. Infineon identifies the TLE7250G family for high-speed CAN with ISO 11898-2 compliance, low EME, and high EMI resistance. The exact automotive qualification status of the selected ordering code should be confirmed from the manufacturer documentation.
What is the best Infineon equivalent for TLE7250GVIOXUMA1?
The TLE7250GXUMA1 is the closest listed Infineon-family option for PCB-level evaluation, while TLE6250GV33 is the explicitly documented predecessor with compatible TLE7250GVIO pin assignment and functions. The best choice depends on package suffix, temperature range, qualification, and lifecycle requirements. Confirm those parameters in the Infineon product documentation before treating either device as a drop-in replacement.

Dữ liệu tham khảo kỹ thuật cho TLE7250GVIOXUMA1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose TLE7250GVIOXUMA1 for a compact 1 Mbps ISO 11898-2 CAN interface in an 8-pin PG-DSO-8 design, particularly when automotive EMC behavior and known predecessor compatibility are priorities. TLE7250GXUMA1 is the closest same-family option for PCB reuse, but its complete ordering suffix, temperature grade, and qualification must be checked. TLE6250GV33 is useful for maintaining a legacy design because Infineon documents compatible pin assignments and functions, although its electrical limits should be compared. TLE7250GVIOXUMA2 should not be treated as automatically interchangeable because its verified package designation is PG-DSO-8-16. No verified cross-brand drop-in equivalent was established, so a competitor would require separate pinout, EMC, automotive-qualification, and lifecycle review.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này TLE7250GXUMA1 TLE7250GVIOXUMA1 TLE7250G TLE6250GV33 TLE7250GVIOXUMA2
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package PG-DSO-8 PG-DSO-8 PG-DSO-8 PG-DSO-8 family configuration PG-DSO-8 PG-DSO-8-16; mechanical confirmation required
Product Type High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver CAN transceiver High-speed CAN transceiver
CAN Channels 1 1 1 1 1 1
Transmitter and Receiver Count 1/1 1/1 1/1 1/1 1/1 1/1

Bảo phân biệt quan trọng

  • Documented compatibility with the preceding CAN transceiver (vsTLE6250GV33)
  • Same-family 1 Mbps CAN performance (vsTLE7250GXUMA1)
  • Low-emission and high-immunity family characteristics (vsTLE6250GV33)
  • Compact eight-pin PG-DSO-8 integration (vsTLE7250GVIOXUMA2)

Ghi chú thiết kế

Route CANH and CANL as a tightly coupled differential pair, using the ground reference and geometry prescribed by the Infineon application guidance. Keep the transceiver close to the bus connector or protected bus stub, minimize stubs, and place protection components near the connector. This reduces common-mode conversion and radiated emissions while improving robustness against external electromagnetic interference.

Do not substitute a device based only on an eight-pin package name. Verify the exact PG-DSO-8 land pattern, pin functions, supply limits, temperature grade, ISO 11898-2 behavior, and transceiver fault modes. In particular, TLE7250GVIOXUMA2 is listed with a PG-DSO-8-16 package designation, so its mechanical footprint must be checked before it is treated as a drop-in replacement.

Provide local supply decoupling and a solid, low-impedance ground connection close to the transceiver. Keep switching regulators, high-current inductors, and crystal or high-speed digital loops away from the CAN differential pair. Use a single-point reference strategy that follows the manufacturer's layout recommendation, because poor return-current paths can increase emissions and reduce immunity even when the nominal CAN data rate is correct.

Validate the network with the intended cable length, topology, node count, and termination rather than checking only the controller's TXD waveform. Confirm dominant and recessive levels, propagation delay, receiver thresholds, and behavior during bus shorts and excessive loading. This is particularly important when designing around the TLE7250G family's 1 Mbps capability because timing margin depends on the complete physical network.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The TLE7250GVIO is identified as RoHS compliant in the manufacturer-related package information. Other compliance fields were not established and remain unknown.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

TLE7250GVIOXUMA1 datasheet TLE7250GVIOXUMA1 pinout TLE7250GVIOXUMA1 datasheet pdf TLE7250GVIOXUMA1 equivalent TLE7250GVIOXUMA1 replacement TLE7250GVIOXUMA1 cross reference TLE7250GVIOXUMA1 price TLE7250GVIOXUMA1 stock Infineon TLE7250GVIOXUMA1 TLE7250GVIOXUMA1 PG-DSO-8 TLE7250GVIOXUMA1 1 Mbps CAN TLE7250GVIOXUMA1 automotive ECU TLE7250GVIOXUMA1 vs TLE7250GXUMA1 TLE7250GVIOXUMA1 vs TLE6250GV33

Các bộ phận và thuật ngữ liên quan

Infineon Technologies TLE7250GVIOXUMA1 TLE7250GXUMA1 TLE7250GVIOXUMA2 TLE7250G TLE6250GV33 CAN transceiver Controller Area Network CAN bus interface IC automotive communication ISO 11898-2 high-speed CAN 1 Mbps data rate PG-DSO-8 SOIC surface mount SMD low EME high EMI resistance electromagnetic emissions electromagnetic immunity RoHS automotive electronic control unit
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ