TLE7250GVIOXUMA1 - 1 Mbps CAN Transceiver | Infineon
MPN: TLE7250GVIOXUMA1 ✓ فعالTLE7250GVIOXUMA1 نمای کلی
A CAN transceiver is an interface IC that connects a host controller's logic-level TX and RX signals to the differential CAN bus. This signal-conditioning stage converts the controller's transmit command into a dominant or recessive bus state and converts bus differential voltage into a receive signal. It belongs to the CAN transceiver hierarchy, which combines interface IC, automotive communication, and physical-layer network components.
The TLE7250G family is characterized by high-speed CAN operation, low EME, and high EMI resistance. Its PG-DSO-8 package supports compact surface-mount PCB layouts, while the standardized 8-pin arrangement permits comparison with compatible CAN transceivers. According to Infineon, the TLE7250GVIO pin assignment and functions are fully compatible with the preceding TLE6250GV33, providing a useful compatibility reference for legacy designs.
TLE7250GVIOXUMA1 is appropriate for automotive ECUs, body-control modules, powertrain controllers, gateway electronics, and industrial CAN systems that use ISO 11898-2 networks. Its 1 Mbps capability suits communication links requiring substantially more bandwidth than low-speed CAN while retaining standardized differential signaling and robust emission and immunity behavior.
Designers should follow the Infineon datasheet for the exact supply limits, pin states, receiver thresholds, bus fault behavior, and external-component recommendations. CAN bus layouts also depend on termination, topology, routing, and protection requirements. A properly terminated network using 120-ohm branches and suitable surge protection is more reliable than isolated component substitution without a complete compatibility review.
This page combines manufacturer product information, verified distributor records, package details, interface characteristics, and drop-in alternatives. It also identifies engineering trade-offs among compatible Infineon devices so that PCB reuse, firmware expectations, automotive qualification, and CAN bus performance can be considered before procurement.
جایگزینهای drop-in برای TLE7250GVIOXUMA1 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای TLE7250GVIOXUMA1 (همان فرمفاکتور و فوتپرینت) — متفاوت در Product Type, Package, RoHS Status, Automotive Qualification, Supply Voltage Range.
TLE7250GXUMA1
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←TLE7250GVIOXUMA1
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←TLE7250G
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←TLE6250GV33XUMA1
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←TLE7250GVIOXUMA2
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←TLE7250GVIOXUMA1 مشخصات
| Product Type | High-speed CAN transceiver |
| CAN Interface | 1 CAN channel |
| Transceiver Configuration | 1 transmitter and 1 receiver |
| Maximum Data Rate | 1 Mbps |
| Compliance | ISO 11898-2 |
| بستهبندی | PG-DSO-8 |
| Package Type | 8-pin surface-mount SOIC |
| Number of Terminals | 8 |
| Package Width | 4 mm |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Electromagnetic Emissions | Low EME |
| Electromagnetic Immunity | High EMI resistance |
| وضعیت RoHS | Compliant |
| Automotive CAN Application | Yes |
| Predecessor Pin Compatibility | Compatible with TLE6250GV33 |
راهنمای پیکربندی پین TLE7250GVIOXUMA1 rectangular
پیکربندی پین برای TLE7250GVIOXUMA1 (پکیج rectangular). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای TLE7250GVIOXUMA1.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
TLE7250GVIOXUMA1 مناسب است برای 6 کاربردs: Automotive Electronic Control Units, Body-Control Module Networking, Powertrain and Chassis Control, Automotive Gateway Controllers, Industrial CAN Control Systems, CAN Diagnostics and Test Equipment.
Automotive Electronic Control Units
The TLE7250GVIOXUMA1 fits automotive electronic control units that connect a CAN controller to a differential CAN bus. Its 1 Mbps high-speed capability provides bandwidth for real-time control data, while the TLE7250G family's low EME and high EMI resistance are valuable in vehicles where switching equipment and external harnesses can disturb communications. The PG-DSO-8 package supports compact surface-mount designs. Confirm the device's exact supply and temperature limits in the Infineon datasheet before production release.
پیشنهادی
Body-Control Module Networking
A body-control module can use the TLE7250GVIOXUMA1 to connect door, lighting, climate, and centralized locking functions to a CAN network. The 1 Mbps ISO 11898-2 interface supports higher messaging throughput than low-speed CAN, helping the controller exchange diagnostic and control frames efficiently. Its 8-pin PG-DSO-8 footprint simplifies compact board construction. Network validation should include termination, fault injection, EMC testing, and operating-temperature checks.
پیشنهادی
Powertrain and Chassis Control
The TLE7250GVIOXUMA1 is applicable to powertrain or chassis-control modules where fast, dependable CAN communication is needed for sensor fusion and actuator commands. Operation up to 1 Mbps supports time-sensitive frames, and high EMI resistance is advantageous in electrically aggressive automotive environments. Because the bus network determines overall reliability, use the manufacturer reference configuration, provision appropriate protection, and verify behavior during dominant-state, recessive-state, short-circuit, and thermal fault tests.
پیشنهادی
Automotive Gateway Controllers
A CAN gateway controller can use the TLE7250GVIOXUMA1 for a high-speed CAN-facing interface that links vehicle domains and aggregates diagnostic traffic. The 1 Mbps capability accommodates the traffic levels expected of modern distributed architectures, while low EME helps limit bus disturbance. The small PG-DSO-8 surface-mount package leaves board area for processing and isolation circuitry. Check pin states, bus fault handling, and exact temperature qualification against the installed gateway design.
پیشنهادی
Industrial CAN Control Systems
The TLE7250GVIOXUMA1 can interface an industrial controller to a 1 Mbps ISO 11898-2 CAN network used for machinery, remote I/O, or process-control equipment. Its high EMI resistance and low emissions help maintain reliable differential signaling in industrial cabinets containing variable-speed drives and switching power supplies. The device is also available in a compact PG-DSO-8 package for space-constrained control boards. Confirm supply limits, grounding, isolation strategy, and the applicable industrial temperature grade.
پیشنهادی
CAN Diagnostics and Test Equipment
The TLE7250GVIOXUMA1 is suitable for diagnostic adapters, CAN interface modules, and test equipment that need to observe or participate in a 1 Mbps CAN network. ISO 11898-2 compatibility places it within a standard controller-area-network ecosystem, while low EME and high EMI resistance support use near electrically active test equipment. Use the exact pin description to connect TXD, RXD, supply, ground, and bus pins, and validate the complete interface under shorted-bus and high-load conditions.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای TLE7250GVIOXUMA1 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | TLE7250GXUMA1 | TLE7250GVIOXUMA1 | TLE7250G | TLE6250GV33 | TLE7250GVIOXUMA2 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-DSO-8 | PG-DSO-8 | PG-DSO-8 | PG-DSO-8 family configuration | PG-DSO-8 | PG-DSO-8-16; mechanical confirmation required |
| Product Type | High-speed CAN transceiver | High-speed CAN transceiver | High-speed CAN transceiver | High-speed CAN transceiver | CAN transceiver | High-speed CAN transceiver |
| CAN Channels | 1 | 1 | 1 | 1 | 1 | 1 |
| Transmitter and Receiver Count | 1/1 | 1/1 | 1/1 | 1/1 | 1/1 | 1/1 |
تفاوتهای کلیدی
- Documented compatibility with the preceding CAN transceiver (در مقابلTLE6250GV33)
- Same-family 1 Mbps CAN performance (در مقابلTLE7250GXUMA1)
- Low-emission and high-immunity family characteristics (در مقابلTLE6250GV33)
- Compact eight-pin PG-DSO-8 integration (در مقابلTLE7250GVIOXUMA2)
یادداشتهای طراحی
Route CANH and CANL as a tightly coupled differential pair, using the ground reference and geometry prescribed by the Infineon application guidance. Keep the transceiver close to the bus connector or protected bus stub, minimize stubs, and place protection components near the connector. This reduces common-mode conversion and radiated emissions while improving robustness against external electromagnetic interference.
Do not substitute a device based only on an eight-pin package name. Verify the exact PG-DSO-8 land pattern, pin functions, supply limits, temperature grade, ISO 11898-2 behavior, and transceiver fault modes. In particular, TLE7250GVIOXUMA2 is listed with a PG-DSO-8-16 package designation, so its mechanical footprint must be checked before it is treated as a drop-in replacement.
Provide local supply decoupling and a solid, low-impedance ground connection close to the transceiver. Keep switching regulators, high-current inductors, and crystal or high-speed digital loops away from the CAN differential pair. Use a single-point reference strategy that follows the manufacturer's layout recommendation, because poor return-current paths can increase emissions and reduce immunity even when the nominal CAN data rate is correct.
Validate the network with the intended cable length, topology, node count, and termination rather than checking only the controller's TXD waveform. Confirm dominant and recessive levels, propagation delay, receiver thresholds, and behavior during bus shorts and excessive loading. This is particularly important when designing around the TLE7250G family's 1 Mbps capability because timing margin depends on the complete physical network.
اطلاعات انطباق
The TLE7250GVIO is identified as RoHS compliant in the manufacturer-related package information. Other compliance fields were not established and remain unknown.