Texas Instruments

TLV27L1ID - 16V 160kHz RRO Op Amp | TI | Signal Conditioning

MPN: TLV27L1ID ✗ Cuối đời
16 V Vdss 11 uA per channel Id 8-pin SOIC Package
MOQ: 1 |

TLV27L1ID Tóm tắt

Texas Instruments TLV27L1ID is a single, 16-V, 160-kHz operational amplifier with rail-to-rail output capability, 11-uA nominal channel current, and an 8-pin SOIC package. It is designed for general-purpose signal conditioning where low supply current, a 2.7-V minimum operating voltage, and output swing close to the supply rails are important.

An operational amplifier is a voltage-controlled differential amplifier that amplifies the difference between two inputs while providing high input impedance and low output impedance. The TLV27L1 belongs to the operational-amplifier hierarchy of analog and mixed-signal ICs. Its rail-to-rail output stage allows the output voltage to approach both supply rails, improving signal range in battery-powered and low-voltage instrumentation.

The 160-kHz gain-bandwidth product supports moderate-frequency gain and filtering tasks, while the 11-uA nominal channel current suits low-power designs. The family operates from a minimum supply of 2.7 V and supports supplies up to 16 V. Rail-to-rail output capability is especially useful for sensor interfaces, current measurements, and control loops whose signals can occupy much of the available supply-voltage range.

According to the Texas Instruments TLV27L1 family datasheet, the TLV27Lx devices are micropower rail-to-rail output amplifiers intended as upgrades for TLC27Lx-family applications where additional bandwidth can be obtained at lower quiescent current. The architecture combines a single amplifier channel with rail-to-rail output swing in a compact surface-mount package.

Typical applications include low-cost sensor interfaces, portable measurement systems, industrial control inputs, battery-powered instrumentation, and small-signal conditioning stages. The 8-SOIC package also supports conventional surface-mount assembly and manual inspection. The operating range should be checked against the specific temperature grade and supply conditions used in the finished product.

Decoupling should be placed close to the supply pins, and the input network should avoid excessive capacitance because this micropower amplifier is optimized for low-power operation rather than high capacitive-load drive. Confirm output settling, noise, offset, and stability in the target feedback configuration using the manufacturer’s recommended compensation and test circuits.

This product page combines the family-level electrical characteristics, package information, lifecycle status, pin assignment, drop-in ordering-code analysis, and practical guidance for portable sensing, industrial instrumentation, and low-voltage analog signal-conditioning designs.

Bộ thay thế dễ dàng lắp đặt cho TLV27L1ID — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TLV27L1ID (cùng hình factor và footprint).

TLV27L1CD

✅ Drop-In
Texas Instruments
📦 8-SOIC
Single general-purpose operational amplifier · 1 channel · 16 V · 2.7 V · 160 kHz · 7 μA · Rail-to-rail

Liên hệ để biết giá

Xem tài liệu →

TLV27L1ID Tỷ lệ tối đa & tính chất điện

Number of Channels 1 channel
Maximum Supply Voltage 16 V
Minimum Operating Supply Voltage 2.7 V
Gain-Bandwidth Product 160 kHz
Nominal Channel Current 11 uA per channel
Output Swing Rail-to-rail
Hộp 8-pin SOIC
Kiểu lắp đặt Surface mount
Product Classification Standard general-purpose amplifier

Cấu hình chân TLV27L1ID

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Chân 1 NC — Not connected
Chân 2 IN− — Inverting input
Chân 3 IN+ — Noninverting input
Chân 4 V− — Negative supply connection
Chân 5 NC — Not connected
Chân 6 OUT — Output
Chân 7 V+ — Positive supply connection
Chân 8 NC — Not connected

Ứng dụng tiêu biểu

TLV27L1ID phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Conditioning, Portable Industrial Instrumentation, Low-Voltage Control Loop, Current-Sense Amplification, Precision Data Acquisition Front End, Portable Audio and Interface Level Conditioning.

🔋

Battery-Powered Sensor Conditioning

TLV27L1ID fits low-power sensor interfaces because it operates from a minimum supply voltage of 2.7 V and draws 11 uA nominal channel current. Place it in a noninverting or transimpedance configuration when the sensor output is close to ground, using the rail-to-rail output stage to preserve much of the available signal range. The 160-kHz gain-bandwidth product is appropriate for sensors with modest bandwidth rather than fast pulse acquisition. Verify source-impedance limits, input bias current, offset behavior, and stability with the actual sensor resistance before releasing the design.

🏭

Portable Industrial Instrumentation

The TLV27L1ID is useful for compact industrial measurement equipment requiring a 2.7-V to 16-V operating supply and modest signal bandwidth. Its single-amplifier 8-SOIC construction simplifies board allocation while rail-to-rail output swing helps represent bipolar or unipolar sensor signals near the supply limits. At 11-uA nominal channel current, it favors portable and distributed instrumentation designs. Check the exact temperature grade, input offset, common-mode limits, and stability with the sensor network because the 160-kHz bandwidth is optimized for general-purpose rather than high-speed precision work.

🔧

Low-Voltage Control Loop

TLV27L1ID can amplify error signals in a low-voltage industrial or embedded control loop where 2.7-V operation, low channel current, and rail-to-rail output are useful. The 160-kHz gain-bandwidth product provides useful closed-loop bandwidth for moderate-speed loops, while the output stage can drive an external actuator driver rather than a load directly. Use local supply bypassing and keep feedback components close to the device. Verify gain error, phase margin, output loading, and startup behavior in the final compensation network rather than assuming a generic amplifier configuration will remain stable.

⚡

Current-Sense Amplification

TLV27L1ID is suitable for a low-side or high-side current-sense amplifier when the required signal bandwidth remains below its 160-kHz gain-bandwidth product. The rail-to-rail output allows a small shunt-derived voltage to be amplified near either supply limit, and the 11-uA nominal channel current reduces the impact on low-power systems. Confirm whether the shunt common-mode voltage remains within the amplifier’s input limits. Validate gain error, offset, noise, and output settling at the intended shunt resistance and current range.

🖥️

Precision Data Acquisition Front End

TLV27L1ID can condition inputs to a data-conversion system when low channel current and rail-to-rail output are more important than wide bandwidth. A gain stage followed by an ADC can use the amplifier’s 2.7-V minimum supply and 16-V maximum capability. The 160-kHz bandwidth supports slow sensor and instrumentation signals but is not intended for high-speed sampling front ends. Pay particular attention to input bias current, offset, resistor-generated noise, and settling time. Place the amplifier and its feedback network near the ADC input to minimize sensitive-node capacitance and interference pickup.

🎧

Portable Audio and Interface Level Conditioning

TLV27L1ID can serve as a low-power level-conditioning amplifier for portable audio, microphone, or general interface signals when the signal bandwidth is below 160 kHz. Rail-to-rail output swing is useful with 2.7-V class supplies because it increases the usable output range, while 11-uA nominal channel current favors battery-operated equipment. The device is a general-purpose amplifier rather than a low-noise audio part, so noise and distortion must be checked against the target signal. Use short, guarded input paths and verify the chosen feedback network for stability with source capacitance.

Where can I download the TLV27L1ID datasheet PDF?
The official TLV27L1ID datasheet PDF is available from the Texas Instruments product family link at https://www.ti.com/lit/ds/symlink/tlv27l1.pdf. The document covers the TLV27L1 single-amplifier family, electrical characteristics, pin configuration, typical circuits, and ordering information. Use the manufacturer document for the exact limit values and test conditions associated with TLV27L1ID, rather than relying on a secondary document mirror.
What are the key specifications of TLV27L1ID that engineers should know?
TLV27L1ID is a single-channel, 16-V, 160-kHz operational amplifier with rail-to-rail output operation and 11-uA nominal channel current. According to the Texas Instruments TLV27L1 product page, the minimum operating supply voltage is 2.7 V, and the device is offered in an 8-pin SOIC package. These characteristics place it between general-purpose precision amplifiers and higher-bandwidth micropower amplifiers.
What is the operating voltage range of TLV27L1ID?
TLV27L1ID operates from a minimum supply voltage of 2.7 V up to the 16-V maximum supply rating stated for the TLV27L1 family. According to the Texas Instruments product page, the device is a single, 16-V operational amplifier. The exact common-mode and output-swing limits depend on the supply voltage, so evaluate those limits against the signal range required by the application.
Is TLV27L1ID suitable for battery-powered sensor interfaces?
Yes, TLV27L1ID is suitable for battery-powered sensor interfaces when the signal bandwidth does not require more than its 160-kHz gain-bandwidth product. Its 11-uA nominal channel current and 2.7-V minimum supply voltage support low-power operation, while rail-to-rail output swing increases usable signal range. A noninverting or transimpedance topology should be checked for offset, bias current, and stability at the intended source impedance.
What is the TLV27L1ID pinout?
TLV27L1ID uses an 8-pin SOIC configuration with pin 1 as NC, pin 2 as the inverting input, pin 3 as the noninverting input, pin 4 as V−, pin 5 as NC, pin 6 as the output, pin 7 as V+, and pin 8 as NC. The manufacturer pin-description table in the TLV27L1 datasheet should govern final PCB routing, particularly for the unused pins and the supply connections.
Where can I buy TLV27L1ID and check current availability?
Use the Request a Quote form on this page to request TLV27L1ID availability, current lead time, and order quantities from XAIPART. The TLV27L1ID ordering code is listed as obsolete by Texas Instruments, so new production procurement should include a careful lifecycle review and consideration of an approved alternate source. Current commercial terms should be confirmed through the quotation process rather than assumed from historical catalog records.
What is the price of TLV27L1ID?
Current TLV27L1ID pricing and quantity availability should be requested through the Request a Quote form on this page. The part is marked obsolete by Texas Instruments, and legacy catalog pricing may not reflect current procurement conditions, package quantities, or allocation. Submit the required quantity and target package quantity with the request so the commercial team can return an accurate quotation.
What is the lead time for TLV27L1ID?
The current lead time for TLV27L1ID must be confirmed through the Request a Quote form on this page. Because the Texas Instruments ordering-code listing identifies this device as obsolete, lead time can depend on remaining factory inventory, lot traceability, and approved sourcing channels. Provide the required quantity, date code needs, and target ship-to location when requesting a quotation.
Is TLV27L1ID in stock?
TLV27L1ID availability is not guaranteed by the historical catalog record, so use the Request a Quote form on this page for a current stock and allocation response. Texas Instruments identifies the ordering code as obsolete, which makes factory inventory and authorized supply continuity important considerations. Do not infer current availability from an older distributor listing or from the existence of an archived product page.
What is the best drop-in replacement for TLV27L1ID?
TLV27L1CD is the closest confirmed same-package ordering alternative in the TLV27L1 family because it uses the same 8-SOIC device family and function. According to the Texas Instruments family datasheet, TLV27Lx devices provide 160-kHz bandwidth and rail-to-rail output operation. Before substitution, verify the exact temperature grade, offset grade, electrical limits, lead time, and PCB pin mapping against the manufacturer documentation.
Can TLV27L1CD replace TLV27L1ID without PCB changes?
TLV27L1CD can serve as a same-footprint ordering alternative for an 8-SOIC TLV27L1 design, but a drop-in decision still requires comparison of temperature grade, offset, supply limits, and production status. The Texas Instruments TLV27L1 family datasheet identifies the TLV27L1 single-amplifier family as providing rail-to-rail output and 160-kHz bandwidth. Preserve the original decoupling and feedback layout while confirming the specific suffix ratings.
When should I choose TLV27L1ID over TLV27L1CD?
Choose TLV27L1ID only when its specified temperature grade, electrical limits, and legacy sourcing conditions match the product requirements. TLV27L1CD may be preferable as a same-family ordering alternative when its grade and lifecycle status better fit an active sourcing plan. The Texas Instruments family documentation establishes the shared 8-SOIC architecture, but production qualification should use the complete ordering table and the latest manufacturer status.
Is TLV27L1ID suitable for industrial control and instrumentation?
TLV27L1ID can be used in general-purpose industrial control and instrumentation signal paths when its 2.7-V to 16-V supply capability, 160-kHz bandwidth, and rail-to-rail output satisfy the circuit requirements. Its 11-uA nominal channel current favors low-power designs. For extended-temperature operation, verify the exact suffix rating and use the manufacturer pin and performance data rather than inferring qualification from the family name.
What can replace TLV27L1ID?
TLV27L1CD is a confirmed same-family, same-package candidate to evaluate as a replacement for TLV27L1ID. Both belong to the TLV27L1 single-amplifier family described by Texas Instruments as a 16-V, 160-kHz, rail-to-rail-output device. No cross-brand pin-compatible replacement is identified by the cross-reference search, so use the Request a Quote form when sourcing the confirmed same-brand alternative or checking other engineering-approved options.
What is the best cross-brand equivalent for TLV27L1ID?
No cross-brand drop-in equivalent can be confirmed from the available cross-reference search, so no competitor MPN should be treated as an automatic replacement. The required comparison must cover the 8-SOIC footprint, 2.7-V minimum supply, 16-V maximum supply, 160-kHz bandwidth, rail-to-rail output, and 11-uA-class current. Use the Request a Quote form for sourcing support and validate any proposed substitute against the original circuit.

Dữ liệu tham khảo kỹ thuật cho TLV27L1ID — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose TLV27L1ID when the design specifically calls for the TLV27L1ID ordering code, an 8-SOIC single amplifier, a 2.7-V minimum supply, 160-kHz bandwidth, rail-to-rail output, and approximately 11-uA nominal channel current. Because the ordering code is marked obsolete, confirm whether an active lifecycle option is required for new production. TLV27L1CD is the closest confirmed same-family, same-package alternative and may be preferable when its temperature grade, offset grade, lifecycle status, and sourcing conditions better fit the project. No cross-brand substitute should be approved solely from package similarity; the substitute must also satisfy supply-voltage, input-range, bandwidth, current, offset, noise, and stability requirements. For designs requiring wider bandwidth, lower offset, lower noise, or stronger output drive, choose a more specialized amplifier instead of using this micropower device as an unverified functional substitute.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này TLV27L1CD
Manufacturer Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC
Number of Channels 1 channel 1 channel
Maximum Supply Voltage 16 V 16 V
Minimum Operating Supply Voltage 2.7 V 2.7 V
Gain-Bandwidth Product 160 kHz 160 kHz
Nominal Channel Current 11 uA per channel 11 uA per channel
Output Swing Rail-to-rail Rail-to-rail
Product Classification Standard general-purpose amplifier Standard general-purpose amplifier

Bảo phân biệt quan trọng

  • Combines a 160-kHz bandwidth with 11-uA nominal channel current (vsTLV27L1CD)
  • Rail-to-rail output supports efficient low-voltage signal range (vsTLV27L1CD)
  • Supports operation from 2.7 V to 16 V (vsTLV27L1CD)

Ghi chú thiết kế

Place the supply bypass capacitor immediately adjacent to the V+ and V− pins, and route the return current through the same ground region used by the amplifier. Keep the noninverting and inverting input traces short, particularly when sensing low-level signals. A 100-nF ceramic bypass capacitor is a common starting point, subject to the stability and transient-response recommendations in the manufacturer datasheet.

Do not assume rail-to-rail output means the input common-mode range also reaches both rails. Check input voltage limits against the actual 2.7-V to 16-V supply range and the chosen feedback topology. Likewise, the 160-kHz gain-bandwidth product is a small-signal characteristic, not a guaranteed large-signal output-swing rate. Validate both linear range and stability in the final circuit.

Account for input-bias-current error across high-value feedback resistors and sensor source impedances. Lower resistance values can reduce offset caused by bias current but increase current consumption. Keep sensitive input nodes away from switching nodes and provide a quiet ground reference. Validate noise and offset with the actual source impedance because sensor resistance and resistor Johnson noise can dominate the amplifier contribution.

Budget the amplifier’s supply current together with sensor, ADC, and interface loads. The 11-uA nominal channel current is a per-channel figure, so total system current can be materially higher after adding conversion and communication stages. Use the maximum supply current and temperature limits from the manufacturer datasheet for worst-case power budgeting rather than relying only on the nominal channel-current value.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No explicit compliance declaration for TLV27L1ID was identified in the cited product pages. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the manufacturer before release.

Tìm kiếm liên quan

TLV27L1ID datasheet TLV27L1ID specifications TLV27L1ID pinout TLV27L1ID datasheet pdf TLV27L1ID schematic TLV27L1ID equivalent TLV27L1ID replacement TLV27L1ID cross reference TLV27L1ID vs TLV27L1CD TLV27L1ID 8-SOIC footprint TLV27L1ID application circuit Texas Instruments TLV27L1ID TLV27L1ID price TLV27L1ID stock TLV27L1ID 16V 160kHz op amp

Các bộ phận và thuật ngữ liên quan

Texas Instruments TLV27L1ID TLV27L1CD TLV27L1 family TLV27Lx operational amplifier single-channel amplifier rail-to-rail output amplifier micropower amplifier analog IC mixed-signal IC semiconductor 8-SOIC SOIC family surface-mount package 16 V 2.7 V 160 kHz 11 uA signal conditioning sensor interface current-sense amplification data acquisition industrial instrumentation battery-powered systems
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ