TMP411 - ±1°C Remote & Local Temp Sensor | Texas Instruments
MPN: TMP411 ✓ Hoạt độngTMP411 Tóm tắt
A temperature sensor is a device that measures temperature and converts it into an electrical signal. The TMP411 is a digital temperature sensor, which means it outputs temperature readings in a digital format over a serial interface, making it easy to interface with microcontrollers and digital systems. It falls under the category of temperature sensors, which are part of the broader sensor family used in various electronic systems for monitoring and control.
Key features of the TMP411 include N-factor and series resistance correction, which improve remote sensing accuracy by compensating for non-idealities in the remote diode. It also features programmable temperature limits and an SMBus-compatible interface. The device operates from a supply voltage of 2.7V to 5.5V and has a resolution of 11 bits for both local and remote channels.
The TMP411 uses a delta-sigma ADC to convert the analog temperature signals to digital. It includes multiple registers for configuration and temperature data storage. The N-factor correction allows the device to be used with a wide variety of remote diodes, while series resistance correction compensates for resistance in the PCB traces, ensuring accurate readings even with long traces.
Typical applications include system thermal management in computers, servers, and industrial equipment, as well as environmental monitoring and battery management. The TMP411 is ideal for applications where accurate remote temperature sensing is required, such as monitoring the temperature of CPUs, GPUs, or other hot components.
When designing with the TMP411, ensure proper PCB layout to minimize noise on the remote sensing lines. Use a filter capacitor on the D+ and D- lines to reduce noise. Also, consider the supply voltage and ensure it is within the specified range for reliable operation.
Bộ thay thế dễ dàng lắp đặt cho TMP411 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TMP411 (cùng hình factor và footprint) — khác nhau ở Interface, Local Temperature Accuracy, N-Factor Correction, Remote Temperature Accuracy, Resolution.
TMP411-Q1
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TMP411D
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TMP451
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TMP431
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADT7461
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LM95234
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TMP411 Tỷ lệ tối đa & tính chất điện
| Local Temperature Accuracy | ±1°C (TMP411), ±0.8°C (TMP411D) |
| Remote Temperature Accuracy | ±1°C (TMP411), ±0.8°C (TMP411D) |
| Temperature Range | -40°C to 125°C |
| Độ phân giải | 11 bits |
| Giao diện | Two-wire, SMBus compatible |
| Điện áp cung cấp | 2.7V to 5.5V |
| Package Options | VSSOP-8, SOIC-8, SOT23-8 |
| N-Factor Correction | Yes |
| Series Resistance Correction | Yes |
| Number of Channels | 2 (local + remote) |
| Khoảng nhiệt độ hoạt động | -40°C to 125°C |
| Trạng thái RoHS | Compliant |
| Kiểu lắp đặt | Surface Mount |
| Kiểu đầu ra | Digital |
| Kiểu cảm biến | Local/Remote |
Cấu hình chân TMP411
| Chân 1 | D+ — Remote temperature sensor positive input |
| Chân 2 | D- — Remote temperature sensor negative input |
| Chân 3 | GND — Ground |
| Chân 4 | SDA — Serial data line (SMBus) |
| Chân 5 | SCL — Serial clock line (SMBus) |
| Chân 6 | ALERT — Alert output (open-drain) |
| Chân 7 | V+ — Power supply (2.7V to 5.5V) |
| Chân 8 | NC — No connect |
Ứng dụng tiêu biểu
TMP411 phù hợp cho 6 Áp dụngs: CPU/GPU Thermal Monitoring, Industrial Equipment Monitoring, Battery Management Systems, Environmental Monitoring, Medical Equipment, Automotive Climate Control.
CPU/GPU Thermal Monitoring
The TMP411 is ideal for monitoring CPU and GPU temperatures in computers and servers. Its remote sensing capability uses the diode-connected transistor inside the processor to measure die temperature accurately. With ±1°C accuracy and N-factor correction, it ensures reliable thermal management. The SMBus interface allows easy integration with system management controllers. The TMP411's series resistance correction compensates for PCB trace resistance, ensuring accurate readings even with long traces. This makes it a preferred choice for high-performance computing systems where thermal throttling is critical.
Được đề xuất
Industrial Equipment Monitoring
In industrial automation, the TMP411 monitors temperatures of motors, power supplies, and control cabinets. Its wide operating range of -40°C to 125°C suits harsh environments. The device's two-wire interface simplifies wiring in distributed systems. The TMP411's accuracy and correction features ensure reliable operation in noisy industrial settings. It can be used to trigger alarms or shutdowns when temperatures exceed safe limits, preventing equipment damage. The small SOIC-8 package fits compact designs, and the low power consumption makes it suitable for battery-powered sensors.
Được đề xuất
Battery Management Systems
The TMP411 monitors battery pack temperatures in electric vehicles and portable electronics. Its remote sensing can measure the temperature of individual cells using diode-connected transistors. The device's accuracy helps prevent overheating and extends battery life. The SMBus interface allows communication with the battery management controller. The TMP411's low supply voltage range (2.7V to 5.5V) is compatible with battery voltages. Its small package and low power consumption make it ideal for space-constrained designs.
Được đề xuất
Environmental Monitoring
The TMP411 can be used in environmental monitoring systems to measure ambient temperature. Its local sensor provides accurate readings, while the remote sensor can monitor external temperatures. The device's digital output simplifies data logging and analysis. The TMP411's accuracy and wide temperature range make it suitable for weather stations and HVAC systems. The two-wire interface allows multiple sensors to be connected on the same bus. The low power consumption is beneficial for battery-powered environmental sensors.
Được đề xuất
Medical Equipment
The TMP411 is used in medical devices for temperature monitoring, such as incubators and diagnostic equipment. Its accuracy and reliability are critical for patient safety. The remote sensing capability allows non-invasive temperature measurement. The device's small package and low power consumption are suitable for portable medical devices. The SMBus interface enables integration with microcontrollers for data processing. The TMP411's wide temperature range covers clinical requirements.
Được đề xuất
Automotive Climate Control
The TMP411 monitors cabin and engine temperatures in vehicles. The TMP411-Q1 variant is AEC-Q100 qualified for automotive use. Its remote sensing can measure temperatures in hard-to-reach areas. The device's accuracy ensures comfortable climate control and prevents engine overheating. The SMBus interface allows integration with the vehicle's CAN bus via a microcontroller. The TMP411's wide temperature range and robust design make it suitable for automotive environments.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TMP411 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TMP411-Q1 | TMP411D | TMP451 |
|---|---|---|---|---|
| Package | VSSOP-8, SOIC-8, SOT23-8 | VSSOP-8, SOIC-8, SOT23-8 | VSSOP-8, SOIC-8, SOT23-8 | VSSOP-8, SOIC-8, SOT23-8 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Local Accuracy | ±1°C | ±1°C | ±0.8°C | ±1°C |
| Remote Accuracy | ±1°C | ±1°C | ±0.8°C | ±1°C |
| Resolution | 11 bits | 11 bits | 11 bits | 12 bits |
| Supply Voltage | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V |
| N-Factor Correction | Yes | Yes | Yes | Yes |
| Automotive Grade | No | Yes (AEC-Q100) | No | No |
Bảo phân biệt quan trọng
- N-factor and series resistance correction (vsTMP431)
- Automotive-grade option (vsTMP411D)
- Software compatibility with TMP451 (vsTMP451)
Ghi chú thiết kế
For accurate remote sensing, keep the D+ and D- traces short and shielded from noise. Use a 100pF capacitor between D+ and D- to filter high-frequency noise. Avoid routing these traces near high-speed digital lines or power switching circuits. According to TI's datasheet, series resistance correction compensates for up to 1kΩ of trace resistance, but minimizing trace length is still recommended.
The TMP411 operates from 2.7V to 5.5V. Use a 0.1µF decoupling capacitor close to the V+ pin to filter supply noise. If the supply is noisy, consider adding a ferrite bead. The device draws low quiescent current, making it suitable for battery-powered applications. Ensure the supply voltage is stable to maintain accuracy.
When using the remote sensor, ensure the diode-connected transistor is properly biased. The TMP411 provides a bias current, but the diode must be connected correctly (D+ to anode, D- to cathode). Incorrect polarity will result in erroneous readings. Also, avoid using the ALERT pin without a pull-up resistor, as it is open-drain.
Thông tin tuân thủ
RoHS compliant per TI product page. TMP411-Q1 is AEC-Q100 qualified.
