TMS320C6421ZWT4 - 400MHz 32-Bit Fixed-Point DSP | Texas Instruments
MPN: TMS320C6421ZWT4 ✓ Hoạt độngTMS320C6421ZWT4 Tóm tắt
A digital signal processor is a programmable semiconductor optimized for arithmetic operations on streams of data. The C64x+ architecture uses advanced very-long-instruction-word processing to execute multiple operations in parallel. This architecture places the TMS320C6421ZWT4 above general-purpose microcontrollers in signal-processing throughput while retaining parallel peripheral interfaces for external memory, audio, and network connectivity.
Key device characteristics include a 400 MHz clock, 96 kB of on-chip RAM, 64 kB of boot ROM, and 3200 MIPS of fixed-point performance. The integrated communication resources include HPI, I2C, McASP, McBSP, UART, and a 10/100 Ethernet MAC. An 8-bit EMIFA supports external parallel memory, while a 16-bit DDR2 SDRAM interface provides high-bandwidth access to external DDR2 memory for larger working buffers.
The processor implements the third-generation high-performance Veloci TI very-long-instruction-word architecture, supporting efficient fixed-point filtering, transforms, and control-loop execution. Its large pin count provides broad parallel-interface access, but the 361-ball BGA also makes high-density PCB routing, controlled-impedance design, thermal management, and assembly capability essential parts of any successful implementation.
Typical uses include industrial motor control, communications infrastructure, audio and voice processing, media transcoding, radar signal processing, and embedded test equipment. The Ethernet MAC and external-memory interfaces allow the processor to act as a dedicated network-engine or control processor while the McASP and McBSP peripherals handle time-critical serial streams.
Designers should plan power and ground delivery across the BGA, maintain the required bypass network, and route DDR2 and EMIFA signals according to the manufacturer's board-layout recommendations. A 361-ball package also requires assembly processes capable of inspecting and testing densely spaced solder joints. The commercial-grade ordering code is supplied in a tray, so the original equipment designer must confirm board, handling, and production requirements before assembly.
This page combines ordering information, interface and package details, application guidance, and drop-in alternatives with practical design notes for engineers evaluating the TMS320C6421ZWT4 in high-throughput fixed-point systems.
Bộ thay thế dễ dàng lắp đặt cho TMS320C6421ZWT4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TMS320C6421ZWT4 (cùng hình factor và footprint) — khác nhau ở External Memory Interface, Package, Package Code.
TMS320C6421ZWTL
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TMS320C6421ZWT
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TMS320C6421ZWL
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TMS320C6421ZWT6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →TMS320C6421ZWT3
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TMS320C6421ZWT4 Thông số kỹ thuật
| Product Type | Fixed-point digital signal processor (DSP) |
| Processor Architecture | C64x+ with advanced Veloci TI very-long-instruction-word architecture |
| Data Width | 32 bit |
| Device Clock Rate | 400 MHz |
| Peak Instruction Throughput | 3200 MIPS |
| On-Chip RAM | 96 kB |
| On-Chip ROM | 64 kB |
| External Memory Interface | 8-bit EMIFA |
| DDR2 Memory Interface | 16-bit DDR2 SDRAM |
| Serial and Control Interfaces | HPI, I2C, McASP, McBSP, UART |
| Ethernet Interface | 10/100 Ethernet MAC |
| Hộp | 361-ball NFBGA, 16 x 16 mm |
| Package Code | LFBGA (ZWT) |
| Số chân | 361 pins |
| Kiểu lắp đặt | Surface mount |
| Shipping Method | Tray |
| Temperature Grade | Commercial |
| Junction Temperature Range | 0°C to 90°C |
| Package Shape | Square |
Hướng dẫn cấu hình chân TMS320C6421ZWT4 square
Cấu hình chân cho TMS320C6421ZWT4 (square gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TMS320C6421ZWT4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TMS320C6421ZWT4 phù hợp cho 6 Áp dụngs: Industrial Motor Control, Communications Infrastructure, Audio and Voice Processing, Image and Video Processing, Radar and Sensor Fusion, Test and Measurement Equipment.
Industrial Motor Control
The TMS320C6421ZWT4 fits closed-loop motor-control systems that require deterministic signal processing rather than general-purpose software execution. Its 400 MHz clock and 3200 MIPS throughput can accelerate current-loop, speed-loop, and transform calculations, while McASP and McBSP provide time-critical serial channels for encoder, resolver, or PWM interfaces. The 16-bit DDR2 SDRAM interface can hold larger control and diagnostic buffers, while EMIFA connects slower parallel peripherals. Engineering attention is required for DDR2 timing, isolated clock distribution, thermal monitoring, and deterministic interrupt scheduling.
Được đề xuất
Communications Infrastructure
The TMS320C6421ZWT4 is suited to packet-processing and communications-infrastructure nodes because it combines 3200 MIPS of fixed-point throughput with an integrated 10/100 Ethernet MAC. The processor can perform protocol handling, filtering, buffering, and traffic shaping while DDR2 SDRAM supplies the bandwidth needed for packet queues and work buffers. McASP and McBSP can carry line-side or backplane data through serial links. Layout should separate Ethernet and memory routing from sensitive clocks, while firmware must define Ethernet descriptors, DDR2 initialization, and boot behavior before hardware sign-off.
Được đề xuất
Audio and Voice Processing
The TMS320C6421ZWT4 can implement multichannel audio, voice, and speech-processing functions where predictable throughput and serial audio connectivity matter. McASP provides a dedicated audio serial interface, while the 400 MHz C64x+ processor executes filtering, mixing, compression, and spectral transforms at fixed-point throughput of 3200 MIPS. On-chip RAM of 96 kB supports short working buffers, and DDR2 SDRAM supports larger sample storage. Board design must maintain controlled-impedance clock and serial lines, provide clean analog and digital power partitioning, and use the manufacturer timing guidance for McASP clocking.
Được đề xuất
Image and Video Processing
The TMS320C6421ZWT4 is appropriate for embedded image-processing pipelines that need high fixed-point throughput and access to external frame memory. Its 16-bit DDR2 SDRAM interface provides wide data paths for pixel rows and multi-frame buffers, while the 8-bit EMIFA can support slower capture, display, or configuration interfaces. The C64x+ architecture can accelerate filtering, color conversion, motion analysis, and image enhancement. Practical constraints include DDR2 routing margin, power integrity across 361 package balls, sustained thermal performance, and the memory bandwidth required by the selected resolution and frame rate.
Được đề xuất
Radar and Sensor Fusion
The TMS320C6421ZWT4 can serve as the central processor in radar, sonar, or multi-sensor fusion equipment where sequential filtering and transform workloads require a deterministic DSP architecture. The 400 MHz core supplies 3200 MIPS for fixed-point FFT, correlation, filtering, and tracking calculations. McASP and McBSP interfaces can accept synchronized sensor streams, while DDR2 SDRAM accommodates history buffers and intermediate results. The design must define clock-domain relationships, interrupt latency, and DDR2 bandwidth, and it must include thermal margin for the highest sustained processing load in its enclosure.
Được đề xuất
Test and Measurement Equipment
The TMS320C6421ZWT4 is well suited to real-time analysis instruments that must process continuous input data with predictable latency. Its high fixed-point throughput supports digital filtering, demodulation, transform calculations, and trigger logic, while McASP and EMIFA provide flexible acquisition and output paths. DDR2 SDRAM can hold captured records for later analysis or host transfer, and the HPI interface permits supervisory control by another processor. A practical implementation requires deterministic boot sequencing, carefully separated analog and digital grounds, and synchronization between the DSP clock and external converters or instrument front ends.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TMS320C6421ZWT4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TMS320C6421ZWTL | TMS320C6421ZWT | TMS320C6421ZWL | TMS320C6421ZWT6 | TMS320C6421ZWT3 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 361-NFBGA (16x16) | 361-NFBGA (16x16) | 361-NFBGA (16x16) | 361-NFBGA (16x16) | 361-NFBGA (16x16) | 361-NFBGA (16x16) |
| Processor Architecture | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP |
Bảo phân biệt quan trọng
- High fixed-point throughput for deterministic signal processing (vsTMS320C6746EZWTA3)
- Integrated communications resources reduce external controller demand (vsTMS320C6421ZWTL)
- External-memory bandwidth for frame and packet buffers (vsTMS320C6746EZWTA3)
- Dedicated Ethernet and serial-audio peripherals (vsTMS320C6421ZWT3)
Ghi chú thiết kế
The 361-ball NFBGA requires a dense power and ground plane design. Follow the manufacturer ball-map and layout guidance for supply decoupling, place bypass components close to their assigned balls, and provide uninterrupted return paths beneath the device. Validate the stack-up, via structures, solder-mask clearances, and assembly process with the PCB fabricator before the first article.
DDR2 SDRAM is the most demanding interface on this processor. Use the manufacturer's topology and timing guidance, maintain controlled impedance for the DDR2 byte lanes, and keep the data, address, and control routes as a compact routing group. Account for fly-by or board topology requirements, layer transitions, and the placement of termination or bypass components in the signal-integrity simulation.
Although the TMS320C6421ZWT4 is a fixed-point processor, sustained filtering, transforms, and memory traffic can create substantial junction heating. Monitor the highest expected processing load and ambient temperature, distribute heat through the board's ground structure, and evaluate the package thermal data against the enclosure. Use the junction-temperature limit of 0°C to 90°C as the boundary identified for this ordering code.
Do not treat every 361-ball C64x+ processor as a drop-in replacement solely from its package dimensions. Validate boot-mode pins, clock multipliers, supply rails, DDR2 and EMIFA routing, peripheral assignment, software initialization, and temperature grade against the manufacturer ordering and pin tables. Suffix changes can alter speed, temperature range, or qualification even when the ball pattern is unchanged.
Thông tin tuân thủ
The ordering information identifies a commercial-grade processor. RoHS, REACH, halogen-free, and conflict-minerals declarations were not established in the available product and distributor information.