Texas Instruments

TMS320C6657CZH8 - 850 MHz Dual-Core C66x DSP | Texas Instruments

MPN: TMS320C6657CZH8 ✓ Hoạt động
625-FCBGA (CZH) Package 850 MHz Speed 128 kB Memory
MOQ: 1 |

TMS320C6657CZH8 Tóm tắt

Texas Instruments TMS320C6657CZH8 is a high-performance dual-core C66x fixed- and floating-point digital signal processor operating at up to 850 MHz, packaged in a 625-pin FCBGA (CZH) package measuring 21 x 21 mm. It combines two C66x DSP cores with dedicated signal-processing resources for demanding communications, industrial, imaging, and test-and-measurement systems. The device supports 128 kB of program memory and 3 MB of data RAM according to the product specifications.

A digital signal processor, or DSP, is a programmable semiconductor optimized for arithmetic operations on continuously sampled or streamed data. The C66x architecture combines fixed-point and floating-point execution capabilities, allowing the same processor to support high-throughput filtering, transforms, modulation, control, and signal-analysis workloads. TMS320C6657CZH8 is the 850 MHz ordering variant of the TMS320C6657 family, while the related TMS320C6657CZH device is listed at 1 GHz.

The processor provides two C66x cores, 2 UART interfaces, and up to 1.25 GHz family-level performance according to the Texas Instruments product page. Its fixed- and floating-point instruction set is intended for applications that require deterministic real-time execution, including radar and communications signal processing, industrial control, audio and image processing, medical instrumentation, and high-speed data acquisition. The processor’s large on-chip memory helps reduce external-memory traffic in tightly coupled designs.

The CZH package provides 625 ball-grid contacts in a 21 x 21 mm FCBGA configuration. Because the device exposes a large number of power, ground, signal, and high-speed interface balls, PCB design requires exact ball-map assignment, controlled-impedance routing, multilayer construction, and careful power and ground-plane design. The manufacturer datasheet should be used as the authoritative source for signal integrity, decoupling, thermal, and exposed-ball requirements.

TMS320C6657CZH8 is suitable for systems where two DSP cores can run independent workloads or communicate through shared on-chip resources. Typical designs partition tasks between cores, such as baseband signal processing and control, acquisition and analysis, or protocol handling and data movement. Parallel execution can improve throughput while allowing the design to avoid transferring large data sets to external processors.

For new layouts, use the CZH ball grid and power architecture exactly as described in the manufacturer datasheet. Keep high-speed serial links short, provide local bulk and high-frequency decoupling at supply balls, and maintain a continuous return path beneath high-speed routes. Validate thermal performance in the final PCB stack-up because the package’s thermal behavior depends strongly on copper area, via density, airflow, and adjacent circuitry.

This page combines manufacturer specifications, ordering information, sourcing details, and practical implementation guidance for engineers evaluating the TMS320C6657CZH8. It also distinguishes verified drop-in alternatives from functionally similar processors whose package or architecture prevents a direct replacement, helping teams narrow the upgrade path before committing to a PCB or firmware platform.

Bộ thay thế dễ dàng lắp đặt cho TMS320C6657CZH8 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TMS320C6657CZH8 (cùng hình factor và footprint) — khác nhau ở Package Dimensions, Package Type, Processor Core, Product Type, Family Maximum Clock Frequency.

Texas Instruments
Processor Core: 1 C66x core
Product Type: Fixed/Floating-Point Digital Signal Processor
So sánh với TMS320C6657CZH8 →
Texas Instruments
Package Dimensions: 21 mm x 21 mm
Package Type: FCBGA (CZH)
Processor Core: 2 C66x cores
So sánh với TMS320C6657CZH8 →
Texas Instruments
Package Dimensions: 19 mm x 19 mm
Package Type: 529-pin FCBGA
Product Type: Fixed-point digital signal processor
So sánh với TMS320C6657CZH8 →

TMS320C6657CZH

✅ Drop-In
Texas Instruments
📦 625-FCBGA (CZH)
Fixed/Floating Point Digital Signal Processor (DSP) · 2 C66x cores · 1 GHz · Up to 1.25 GHz · 128 kB · 3 MB · 2 UART · 900 mV to 1.1 V

Liên hệ để biết giá

Xem tài liệu →

TMS320C6655CZH

✅ Drop-In
Texas Instruments
📦 625-FCBGA (CZH)
Fixed/Floating-Point Digital Signal Processor · 1 C66x core · 1 GHz · 1.25 GHz · 8000 MIPS · 16 bit · 128 kB · 2 MB

Liên hệ để biết giá

Xem tài liệu →

TMS320C6657CZH8 Thông số kỹ thuật

Product Type Fixed/Floating Point Digital Signal Processor
Processor Core 2 x C66x
Tần số xung maksimum 850 MHz
Family Maximum Clock Frequency 1.25 GHz
Program Memory Size 128 kB
Data RAM Size 3 MB
UART Interface Count 2
Arithmetic Format Fixed-point and floating-point
Package Type 625-FCBGA (CZH)
Package Dimensions 21 x 21 mm
Ball Count 625 balls
Kiểu lắp đặt Surface Mount
Khoảng nhiệt độ hoạt động 0C to +85C

Hướng dẫn cấu hình chân TMS320C6657CZH8 21 x 21 mm

Cấu hình chân cho TMS320C6657CZH8 (21 x 21 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 21 x 21 mm cho TMS320C6657CZH8

Không có dữ liệu chân cụ thể sẵn có cho TMS320C6657CZH8.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

TMS320C6657CZH8 phù hợp cho 6 Áp dụngs: Communications Baseband Processing, Industrial Control and Condition Monitoring, RF and Spectrum Analysis, High-Speed Data Acquisition, Image and Video Processing, Medical Signal Processing.

🌐

Communications Baseband Processing

TMS320C6657CZH8 fits communications baseband systems that require deterministic fixed-point and floating-point computation. Its two C66x cores can run parallel channel-processing workloads, while 128 kB of program memory and 3 MB of data RAM support substantial resident code and working sets. At an 850 MHz clock, the processor suits filtering, interpolation, modulation, spectral analysis, and protocol acceleration. Use its high-speed serial and memory interfaces to establish predictable dataflow between acquisition logic, shared memory, and the DSP fabric. The implementation trade-off is that the large FCBGA requires careful power integrity and controlled-impedance routing, while the dual-core design must be partitioned to avoid synchronization bottlenecks.

🏭

Industrial Control and Condition Monitoring

TMS320C6657CZH8 can implement real-time condition-monitoring and industrial-control functions by assigning signal analysis to one C66x core and supervisory control to the other. Its fixed- and floating-point instruction support is useful for filters, transforms, adaptive algorithms, and control calculations, while 3 MB of data RAM allows substantial local buffering. An industrial design can use the DSP for vibration, acoustic, or power-quality analysis without transferring every sample to a host processor. Firmware should define deterministic core-to-core data exchange and sufficient scheduling margin for the selected 850 MHz grade, while the PCB must provide robust decoupling and thermal paths for sustained industrial operation.

🌐

RF and Spectrum Analysis

TMS320C6657CZH8 is appropriate for RF test, spectrum analysis, and signal-characterization equipment that must process wide streams of complex samples in real time. The two C66x cores can divide the workload between acquisition-path filtering and higher-level measurement functions, exploiting the processor’s support for both fixed- and floating-point arithmetic. The 3 MB data RAM can hold time-domain and spectral working buffers, reducing pressure on external memory during short measurement bursts. For accurate results, synchronize the sample clock and data interfaces carefully, preserve coherent timing across both cores, and validate the analog front end independently from the DSP. Power and thermal design should account for the final clock, I/O activity, memory traffic, and enclosure temperature.

📡

High-Speed Data Acquisition

TMS320C6657CZH8 can serve as the real-time processing engine in high-speed data-acquisition systems where multiple algorithms must operate on incoming samples. Its dual-core architecture supports parallel acquisition processing and real-time analysis, while 128 kB of program memory and 3 MB of data RAM provide on-chip resources for code and intermediate buffers. The design can use one core for continuous filtering or trigger processing and the other for measurement, transfer preparation, or control. At 850 MHz, deterministic scheduling is straightforward but still depends on memory latency and interface bandwidth. Validate end-to-end latency with realistic DMA traffic, and lay out high-speed acquisition links with controlled impedance and short return paths.

📺

Image and Video Processing

TMS320C6657CZH8 supports embedded image processing by combining two C66x cores with high-throughput fixed- and floating-point execution. One core can execute filtering, enhancement, or feature extraction while the other handles motion analysis, frame management, or a control function. The 3 MB data RAM is valuable for tiles and intermediate image buffers, although larger frames still require efficient DDR transfers and careful cache use. A practical implementation should minimize unnecessary memory movement and partition frame boundaries consistently between cores. The 625-ball package also demands meticulous ball assignment, power-plane segmentation, signal-integrity validation, and thermal-via placement to sustain reliable processing under continuous workloads.

💊

Medical Signal Processing

TMS320C6657CZH8 can be evaluated for medical instrumentation that performs deterministic acquisition, filtering, spectral analysis, and control. Its dual C66x architecture allows one core to maintain a time-critical signal path while the second performs diagnostics, logging, or user-interface support. The processor’s fixed-point support is useful for high-throughput filtering, and its floating-point capability accommodates scaling and higher-precision analysis. Design validation should include worst-case latency, numerical results across the input range, watchdog behavior, and fail-safe outputs for connected equipment. The final implementation must also satisfy the product’s applicable medical, electrical-safety, and environmental requirements, none of which are established solely by selecting this DSP.

What is TMS320C6657CZH8?
TMS320C6657CZH8 is a Texas Instruments dual-core C66x fixed- and floating-point digital signal processor rated at 850 MHz and supplied in a 625-pin FCBGA (CZH) package. According to the Texas Instruments TMS320C6657 product page, the device belongs to a high-performance DSP family with two UART interfaces, 128 kB of program memory, and 3 MB of data RAM. It is intended for real-time communications, industrial control, imaging, and test-instrumentation workloads that benefit from parallel fixed-point and floating-point processing.
What is the clock frequency of TMS320C6657CZH8?
TMS320C6657CZH8 operates at up to 850 MHz. Texas Instruments lists the related TMS320C6657CZH ordering variant at 1 GHz, while the broader TMS320C6657 product family supports performance levels up to 1.25 GHz. The distinction is important when replacing devices or planning board-level power, thermal, and clock-distribution requirements; use the ordering-information table in the manufacturer datasheet to confirm the exact frequency grade associated with each part number.
What package does TMS320C6657CZH8 use?
TMS320C6657CZH8 uses the 625-ball FCBGA CZH package with a 21 x 21 mm body. The Texas Instruments part-details page identifies the package as FCBGA (CZH) with 625 pins and an operating range of 0C to +85C. Because the package contains hundreds of contacts, PCB layout must follow the manufacturer’s ball map, power architecture, and recommended multilayer stack-up rather than a generic BGA escape-routing pattern.
Where can I download the TMS320C6657CZH8 datasheet?
The TMS320C6657CZH8 datasheet is available through the Texas Instruments TMS320C6657 product page at https://www.ti.com/product/TMS320C6657. The same family is covered by the manufacturer document titled “TMS320C6655 and TMS320C6657 Fixed and Floating-Point Digital Signal Processor,” identified as Revision D in the product-part details listing. Use the family document for electrical characteristics and application guidance, then confirm the exact CZH8 ordering details against the device-specific orderable-information table.
Where can I find the TMS320C6657CZH8 pinout and ball map?
The TMS320C6657CZH8 pinout is published in the pin-configuration and ball-map sections of the Texas Instruments TMS320C6655 and TMS320C6657 datasheet. The CZH package contains 625 balls, including device grounds, supply inputs, clock interfaces, high-speed communications links, and general-purpose signal pins. Use the datasheet’s terminal-information tables to identify every ball before assigning PCB tracks or test points; a simplified package drawing is not sufficient for a 625-ball design.
What are the key specifications of TMS320C6657CZH8 that engineers should know?
The key TMS320C6657CZH8 specifications are two C66x processor cores, an 850 MHz maximum clock, 128 kB of program memory, 3 MB of data RAM, two UART interfaces, and a 625-ball FCBGA (CZH) package. The family also supports fixed-point and floating-point arithmetic. These figures position the device as a parallel real-time processor for communications, control, imaging, and acquisition systems rather than a general-purpose microcontroller.
Can TMS320C6657CZH8 be used in communications systems?
Yes, TMS320C6657CZH8 is well suited to communications systems requiring deterministic, high-throughput signal processing. Its two C66x cores can execute fixed-point and floating-point algorithms in parallel, while 3 MB of data RAM helps keep time-critical data on chip. Depending on the board architecture, the processor can handle filtering, modulation, channelization, spectral analysis, or protocol processing while coordinated through shared memory and high-speed interfaces.
What is TMS320C6657CZH8 used for in industrial and test equipment?
TMS320C6657CZH8 can support industrial controllers, vibration analyzers, communications analyzers, imaging systems, and automated test equipment because its dual C66x architecture provides parallel real-time computation and deterministic control. A practical design can assign acquisition and filtering to one core while the second executes control, calibration, or results formatting. The 3 MB data RAM reduces external-memory transfers, although final throughput still depends on clocking, DDR interface performance, and memory topology.
TMS320C6657CZH8 vs TMS320C6657CZH - which is the better choice?
TMS320C6657CZH8 is the 850 MHz grade, while TMS320C6657CZH is listed at 1 GHz. Both are identified as 625-FCBGA CZH devices, making them relevant to the same family and board-planning context, but they are not identical performance grades. Choose CZH8 when the lower clock satisfies the design’s processing and power budget; choose CZH when the additional 150 MHz of clock capability is justified and the system has been revalidated for clock, thermal, and power behavior.
When should I choose TMS320C6657CZH8 instead of another C66x DSP?
Choose TMS320C6657CZH8 when a design needs two C66x cores, fixed-point and floating-point support, 3 MB of data RAM, and an 850 MHz clock while retaining the 625-ball CZH package platform. It is particularly appropriate for deterministic parallel workloads in communications, industrial control, imaging, and instrumentation. A different speed grade or device family should be selected when clock rate, memory, power envelope, or peripheral requirements differ beyond acceptable timing and thermal margins.
What is the best drop-in replacement for TMS320C6657CZH8?
TMS320C6657CZH is the closest verified same-family candidate for consideration because it uses the same 625-FCBGA CZH package and differs primarily in its listed 1 GHz clock grade versus 850 MHz for CZH8. It can support a board-level substitution path when the faster device’s power, thermal, clocking, and firmware timing behavior is acceptable. No verified cross-manufacturer drop-in replacement was identified, and package-compatible alternatives with different architectures should not be treated as direct replacements.
Can TMS320C6657CZH replace TMS320C6657CZH8?
TMS320C6657CZH can be evaluated as a same-package upgrade because Texas Instruments lists it in the 625-FCBGA CZH package at 1 GHz, compared with 850 MHz for TMS320C6657CZH8. The replacement is not electrically identical: the faster grade can change power consumption, clock timing, thermal performance, and possibly software timing margins. Confirm the relevant operating limits and revalidate the complete design before approving the substitution.
How much thermal design is required for TMS320C6657CZH8?
TMS320C6657CZH8 requires a complete thermal and power-delivery design because it combines two C66x cores with a large FCBGA package and high-speed external interfaces. Use the manufacturer’s electrical characteristics and power-consumption tables for the selected clock, core voltage, I/O state, and temperature. In the PCB, provide dense local decoupling, multiple power and ground connections, adequate copper and thermal-via coverage, and airflow appropriate to the final enclosure.
Is TMS320C6657CZH8 in stock and what is its lead time?
Current stock and lead time should be confirmed through the Request a Quote form on this page. One product listing associated with TMS320C6657CZH8 displayed inventory of 6,736 pieces and showed a unit price, but it did not provide qualifying quantity-break pricing for this exact MPN. Because DSP inventory can move quickly and lead time may depend on order quantity, request the current availability, manufacturer part condition, and delivery schedule before committing the BOM.
How do I design the PCB for TMS320C6657CZH8?
Design the TMS320C6657CZH8 PCB from the manufacturer’s CZH ball map and recommended reference layout. Start with the required multilayer stack-up, assign power and ground balls according to the datasheet, and place local decoupling close to the relevant supply terminals. Route high-speed differential interfaces as controlled-impedance pairs with continuous reference planes, avoid discontinuities beneath the package, and include thermal-via arrays. Signal-integrity simulation and board-level validation are important because the package has 625 contacts.

Dữ liệu tham khảo kỹ thuật cho TMS320C6657CZH8 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose TMS320C6657CZH8 when the design needs two C66x cores, fixed- and floating-point arithmetic, 128 kB of program memory, and 3 MB of data RAM at an 850 MHz clock. Select TMS320C6657CZH when the same 625-FCBGA platform is useful and the additional processing headroom from 1 GHz justifies the power, thermal, and firmware-timing review. Consider TMS320C6655CZH when its processor resources are sufficient and the Texas Instruments pin-compatible relationship is relevant, but verify its exact memory, clock, peripheral, and power characteristics before substitution. Do not treat TMS320DM647ZUT9 as a drop-in part merely because it is also a DSP; its 529-pin package and different architecture require a board redesign. For new precision or high-speed systems, evaluate processor throughput, memory bandwidth, synchronization, clocking, and thermal requirements together rather than selecting by core frequency alone.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này TMS320C6657CZH TMS320C6655CZH
Brand Texas Instruments Texas Instruments Texas Instruments
Package 625-FCBGA (CZH), 21 x 21 mm 625-FCBGA (CZH), 21 x 21 mm 625-FCBGA (CZH)
Processor Cores 2 x C66x 2 x C66x 2 x C66x
Arithmetic Support Fixed-point and floating-point Fixed-point and floating-point Fixed-point and floating-point

Bảo phân biệt quan trọng

  • 850 MHz performance grade within the dual-core C667 platform (vsTMS320C6657CZH)
  • Dual-core fixed- and floating-point processing with 3 MB data RAM (vsTMS320C6655CZH)
  • High-density 625-contact integration in a 21 x 21 mm FCBGA (vsTMS320DM647ZUT9)

Ghi chú thiết kế

Assign every supply and ground ball exactly as directed in the Texas Instruments CZH reference design. Place local high-frequency ceramic capacitors at the package supply inputs and bulk capacitance near the relevant power branches. Use the manufacturer’s recommended power-up sequence and voltage limits for each rail. Avoid creating split planes or long neckdowns beneath the device, because the 625-contact package contains many power and ground balls whose connectivity must remain continuous.

The final thermal solution must be evaluated with the DSP, DDR memory, power converters, and adjacent circuitry operating together. Add thermal vias beneath the package where permitted by the land pattern and maintain generous ground-copper continuity. Validate junction temperature in the finished enclosure rather than relying on board-only calculations. Raising the clock or increasing I/O activity can materially change total power, so repeat thermal validation for every supported performance grade.

Route high-speed differential interfaces over a continuous reference plane with the impedance geometry specified by the manufacturer. Keep the device’s high-speed escape paths short, use matched layer transitions, and avoid splits or antipads in nearby reference planes. Pay particular attention to clock distribution and memory-interface routing, where deterministic timing and return-path continuity directly affect processor reliability and signal integrity.

Do not treat a same-package processor as a drop-in replacement until clock speed, power behavior, peripheral configuration, boot resources, and software timing have been checked. In particular, TMS320C6657CZH runs at 1 GHz versus 850 MHz for TMS320C6657CZH8, while TMS320C6655CZH may differ in resource and power characteristics. Verify the exact ordering code, pin multiplexing, and thermal margin using the manufacturer datasheet before releasing a substitution to production.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The available product information identifies the device and package but does not establish the requested compliance statuses.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

TMS320C6657CZH8 datasheet TMS320C6657CZH8 pinout TMS320C6657CZH8 datasheet pdf TMS320C6657CZH8 equivalent TMS320C6657CZH8 replacement TMS320C6657CZH8 cross reference TMS320C6657CZH8 footprint TMS320C6657CZH8 price TMS320C6657CZH8 stock Texas Instruments TMS320C6657CZH8 TMS320C6657CZH8 application circuit TMS320C6657CZH8 vs TMS320C6657CZH

Các bộ phận và thuật ngữ liên quan

Texas Instruments TMS320C6657CZH8 TMS320C6657CZH TMS320C6655CZH C66x DSP digital signal processor fixed-point arithmetic floating-point arithmetic dual-core processor parallel processing real-time signal processing FCBGA CZH package 625-ball package surface-mount semiconductor communications baseband industrial control spectrum analysis high-speed data acquisition image processing medical signal processing program memory data RAM 850 MHz
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ