TMS320F240PQS - 20MHz 16-Bit Flash DSP | Texas Instruments
MPN: TMS320F240PQS ✓ Hoạt độngTMS320F240PQS Tóm tắt
A digital signal processor is a specialized microprocessor architecture designed to execute mathematical and control algorithms efficiently. A DSP controller extends that processing capability with embedded memory, digital I/O, timers, analog interfaces, and control-oriented peripherals. The TMS320F240PQS sits in the hierarchy of digital signal controller, fixed-point DSP, microcontroller, embedded processor, and semiconductor. It is intended for systems requiring deterministic real-time control rather than general-purpose computing.
The most prominent verified specifications are the 20 MHz operating frequency, 16-bit processor architecture, 32 KB of flash memory, 132-pin BQFP package, and 5 V operating supply identified in the component-comparison data. Its flash memory allows control firmware to be stored directly on the controller. The large 132-pin package exposes the device's extensive motor-control peripheral set, while its 20 MHz clock supports processing associated with the verified 20 MIPS performance figure.
The TMS320F240 architecture uses the C2xLP core CPU for fixed-point signal and control processing. Its combination of flash program memory and dedicated real-time peripherals distinguishes it from earlier RAM-programmed DSP controllers. This makes the part relevant to closed-loop motor systems, where acquisition, filtering, transformation, modulation, and actuator calculations must occur within a predictable control interval. The verified family description specifically identifies digital motor and motion control as the optimization target.
Typical uses include digital motor control, industrial automation, power-converter control, servo systems, and embedded signal-processing equipment. In such systems, the controller can execute control algorithms while its communication and timing peripherals coordinate external sensors, power stages, and protection functions. The 132-pin BQFP package is appropriate for through-hole industrial or legacy control boards where a large pin count simplifies access to numerous control and communications signals.
Designers should verify the complete pinout, timing, peripheral configuration, and electrical limits against the manufacturer datasheet before laying out a new PCB. The verified data does not expose a complete machine-readable 132-pin assignment, so no pin names are inferred here. The 132-pin BQFP package also requires careful lead clearance, solder-joint inspection, and consideration of thermal performance when the controller is mounted alongside power-conversion circuitry.
This product record combines verified distributor specifications, source links, package information, lifecycle context, and application-oriented engineering guidance. It distinguishes documented facts from missing data and avoids presenting unverified pin assignments, prices, compliance declarations, or substitute parts as established facts.
Bộ thay thế dễ dàng lắp đặt cho TMS320F240PQS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TMS320F240PQ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TMS320F240PQG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TMS320F240PQS Thông số kỹ thuật
| Product Type | 16-bit fixed-point digital signal processor and digital signal controller |
| Device Family | TMS320C2xx generation |
| Series | C2000 C24x |
| Tần số xung maksimum | 20 MHz |
| Processor Performance | 20 MIPS |
| Bề rộng đường dữ liệu | 16 bit |
| Instruction Type | Fixed Point |
| Program Memory Size | 32 KB flash (16K x 16) |
| Data RAM Size | 1.0625 KB |
| Điện áp cung cấp hoạt động | 5 V |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +125 °C |
| Hộp | 132-pin BQFP, 24.13 mm x 24.13 mm |
| Kiểu lắp đặt | Through-hole surface-mount package |
| Core Architecture | C2xLP core CPU |
| Primary Application | Digital motor and motion control |
Hướng dẫn cấu hình chân TMS320F240PQS 132-pin bqfp, 24.13 mm x 24.13 mm
Cấu hình chân cho TMS320F240PQS (132-pin bqfp, 24.13 mm x 24.13 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TMS320F240PQS.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TMS320F240PQS phù hợp cho 6 Áp dụngs: Digital Motor Control, Motion-Control Systems, Industrial Power-Converter Control, Servo-Drive Control, Embedded Signal Processing, Legacy Industrial Control Boards.
Digital Motor Control
The TMS320F240PQS fits digital motor control because it is a 16-bit fixed-point DSP controller operating up to 20 MHz with 20 MIPS performance and 32 KB of flash memory. It can execute feedback, filtering, and modulation algorithms while coordinated timing peripherals manage the control sequence. The verified family description explicitly identifies digital motor control as an optimization target. Its 132-pin BQFP provides access to the controller's extensive control-oriented signals, although every pin assignment must be checked against the manufacturer datasheet before routing. Using the embedded flash for resident control code also avoids an external program-memory interface in a dedicated controller design.
Được đề xuất
Motion-Control Systems
The TMS320F240PQS is appropriate for motion-control systems that require deterministic fixed-point computation at up to 20 MHz. Its 20 MIPS processing capability supports real-time control calculations, while 16 KB x 16 words of flash hold application firmware and 1.0625 KB of data RAM supports working state. The verified Texas Instruments family information positions the controller for motion-control applications rather than general-purpose processing. The 132-pin package can expose the numerous digital control, communication, and peripheral signals needed by a legacy through-hole motion-control board, subject to full pin-level verification.
Được đề xuất
Industrial Power-Converter Control
The TMS320F240PQS can serve as the control processor in an industrial power-converter control board when the design requires deterministic 16-bit fixed-point math. Its 20 MHz clock and 20 MIPS rate provide computational margin for sampling, loop-control, and supervisory functions, while the 5 V supply matches the verified device operating class. The 132-pin BQFP can support access to timing, pulse, capture, and communications resources. Engineers must confirm analog-interface requirements and peripheral multiplexing in the datasheet because the supplied snippets do not enumerate those functions or pins.
Được đề xuất
Servo-Drive Control
The TMS320F240PQS is suitable for servo-drive control because its 16-bit fixed-point architecture can process position, velocity, and current-loop calculations at a 20 MHz clock. The 32 KB flash area is large enough to hold dedicated real-time control firmware, and the 132-pin package exposes the peripheral connections commonly needed in a multi-axis controller. Its specified -40 °C to +125 °C operating range is appropriate for industrial environments. Final signal selection, timing, and isolation requirements must be validated against the complete manufacturer datasheet rather than inferred from the distributor summary.
Được đề xuất
Embedded Signal Processing
The TMS320F240PQS can implement embedded fixed-point signal-processing tasks alongside real-time control. Its 20 MIPS throughput, 16-bit data path, and C2xLP core architecture are suited to filtering, transformations, and related algorithms, while 32 KB of on-chip flash supports resident firmware. Using a DSP controller rather than a general-purpose microcontroller can simplify deterministic execution when sampling and computation must share a hardware platform. The supplied data does not enumerate algorithm accelerators or peripheral mappings, so developers should verify whether the required filters, communications channels, and external interfaces are present in the selected device variant.
Được đề xuất
Legacy Industrial Control Boards
The TMS320F240PQS is relevant to legacy industrial control boards designed around the 132-pin BQFP footprint. Its 16-bit fixed-point processing, 20 MHz operating frequency, and embedded flash combine computational capability with a compact controller implementation, while the large leaded package remains practical for through-hole boards assembled in industrial volumes. The package dimensions are verified at 24.13 mm by 24.13 mm, allowing mechanical checks against existing enclosures. Because the supplied data does not provide a complete pinout, board reuse must begin with a pin-by-pin comparison and must not rely only on the matching package designation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TMS320F240PQS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TMS320F240PQ | TMS320F240PQG4 |
|---|---|---|---|
| Package | 132-BQFP (24.13 mm x 24.13 mm) | 132-BQFP (24.13 mm x 24.13 mm) | 132-BQFP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
Bảo phân biệt quan trọng
- Verified exact ordering-code configuration (vsTMS320F240PQ)
- Embedded flash supports resident control firmware (vsTMS320F240PQ)
- Full commercial ordering-code retention (vsTMS320F240PQG4)
Ghi chú thiết kế
Do not approve a replacement solely because it is listed in a 132-pin BQFP package. Confirm every power, ground, peripheral, interrupt, and communication signal against the manufacturer datasheet, then verify the ordering suffix, temperature grade, qualification status, and device marking. The verified evidence directly establishes TMS320F240PQ and TMS320F240PQG4 as same-family candidates, but it does not supply a complete pin-assignment table for an unconditional production substitution.
The TMS320F240PQS uses a 132-pin BQFP package measuring 24.13 mm by 24.13 mm. Preserve the manufacturer's land pattern, pin-1 orientation, courtyard, and solder-mask geometry exactly; a mechanically similar package does not guarantee electrical compatibility. For leaded through-hole designs, verify drill tolerances, pad diameters, annular rings, and the available component-body clearance against the enclosure and adjacent heat sinks before releasing the layout.
The supplied data verifies a -40 °C to +125 °C operating-temperature range but does not provide power dissipation, junction-temperature limits, or thermal resistance. Therefore, no numerical thermal estimate is presented. In a power-converter or motor-control system, calculate dissipation from the actual 5 V supply current and use the manufacturer thermal information and the board's copper area for a junction-temperature check. Isolate the controller thermally from nearby power stages where practical.
Treat clock, reset, interrupt, and high-speed control signals as timing-critical routes after their assignments are confirmed in the datasheet. Keep the 20 MHz clock path short, provide a clean return path, and place required bypassing capacitors close to the relevant supply pins using the manufacturer's recommended values and layout. Avoid deriving layout assumptions from peripheral names or examples alone because the verified snippets do not enumerate the complete TMS320F240PQS pinout.
Thông tin tuân thủ
The supplied verified data does not extract explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for TMS320F240PQS. TMS320F240PQG4 appears in comparison results, but the supplied snippet does not define the G4 designation, so it was not used to infer compliance.
