TPA3245DDV - 115W Class-D Amplifier | Texas Instruments
MPN: TPA3245DDV ✓ Hoạt độngTPA3245DDV Tóm tắt
A Class-D audio amplifier is a power-management semiconductor that switches its output stage efficiently to reproduce an analog input signal at speaker-level voltage and current. The TPA3245 belongs to the amplifier IC hierarchy that includes analog power amplifiers, audio amplifiers, and Class-D output stages. Its two-channel architecture supports stereo operation, while its mono capability permits both channels to be combined for a higher-power single-channel configuration.
The TPA3245DDV provides 115 W per channel in stereo mode and 230 W into a single channel in mono mode. Its 12 V to 31.5 V operating supply range accommodates higher-voltage audio systems, and its analog input architecture accommodates conventional line-level signals. The Class-D topology provides high efficiency while supporting the high output power associated with powered speakers, home-theater equipment, and professional audio amplification.
The 44-pin HTSSOP package provides a compact surface-mount implementation for multi-channel audio products. The manufacturer identifies the TPA3245 as a high-performance amplifier designed to provide premium sound quality with efficient Class-D technology. Its 15 mA quiescent current helps limit standing consumption when the amplifier is active but not delivering significant output power.
Typical uses include powered stereo speakers, home-theater amplifiers, soundbars, powered subwoofer platforms, and other high-output audio equipment. In a stereo design, each channel drives its assigned speaker section. In a bridged mono arrangement, the two output channels combine to deliver up to 230 W into one speaker load.
Thermal design, output-filter selection, power-rail stability, and speaker-load compatibility determine practical performance. The design must also account for the full 12 V to 31.5 V supply range and maintain adequate PCB copper area for heat dissipation. Use the manufacturer datasheet pin description and application information when assigning connections and laying out the power stage.
This product page combines the official device description, distributor identification, electrical highlights, application guidance, and verified replacement information. It also distinguishes an exact same-package ordering variant from packaging-only alternatives and identifies design parameters that require confirmation in the manufacturer datasheet before a PCB is released.
Bộ thay thế dễ dàng lắp đặt cho TPA3245DDV — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TPA3245DDVR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TPA3245DDV Tỷ lệ tối đa & tính chất điện
| Product Type | Stereo Class-D audio power amplifier |
| Amplifier Topology | Class-D |
| Number of Channels | 2 channels |
| Stereo Output Power | 115 W |
| Mono Output Power | 230 W |
| Supply Voltage Range | 12 V to 31.5 V |
| Input Type | Analog input |
| Hộp | 44-pin HTSSOP |
| Kiểu lắp đặt | Surface mount |
| Điện áp yên tĩnh | 15.0 mA |
| Power Dissipation | 450 mW |
Hướng dẫn cấu hình chân TPA3245DDV 44-pin htssop
Cấu hình chân cho TPA3245DDV (44-pin htssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TPA3245DDV.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TPA3245DDV phù hợp cho 6 Áp dụngs: Powered Stereo Speakers, Home-Theater Power Amplifier, Powered Soundbar, Powered Subwoofer Amplifier, Professional Active Monitor, Multi-Room Audio Amplifier.
Powered Stereo Speakers
The TPA3245DDV fits a powered stereo-speaker amplifier because its two output channels deliver up to 115 W per channel from a 12 V to 31.5 V supply. Each analog input can feed the corresponding Class-D output stage, allowing the design to concentrate amplification in the speaker enclosure rather than in a separate rack amplifier. The 15.0 mA listed quiescent current also helps manage idle consumption. Final speaker compatibility depends on the supported load, output-filter design, and thermal layout, which must be confirmed in the manufacturer datasheet.
Được đề xuất
Home-Theater Power Amplifier
A home-theater power amplifier can use the TPA3245DDV to drive passive front-left and front-right speakers with analog audio inputs from a surround processor or preamplifier. The device's 115 W stereo capability and 12 V to 31.5 V supply range suit high-output channels, while the 44-pin HTSSOP package supports compact multi-channel boards. Designers should use the manufacturer application circuit to establish the output filter, supply decoupling, grounding, and thermal copper required for the selected speaker impedance and enclosure temperature.
Được đề xuất
Powered Soundbar
The TPA3245DDV is suitable for a powered soundbar requiring efficient, high-output stereo amplification in a constrained enclosure. Two analog channels can drive left and right speaker sections at up to 115 W per channel, while the Class-D topology supports high power with reduced heat relative to many linear-output approaches. A soundbar implementation should preserve the manufacturer's recommended output network and provide continuous copper around the HTSSOP package. Thermal performance must be checked at the highest sustained channel power rather than at the 230 W mono headline rating.
Được đề xuất
Powered Subwoofer Amplifier
The TPA3245DDV can be configured for mono amplification in a powered subwoofer, using its stated 230 W mono capability and 12 V to 31.5 V operating supply. Combining its two output channels in mono frees the enclosure from a separate stereo power stage and concentrates amplification around the subwoofer driver. This configuration requires correct BTL wiring, a suitably rated output filter, and verification of speaker impedance and thermal conditions in the manufacturer application guidance. The package's power handling must be considered continuously at the selected output level.
Được đề xuất
Professional Active Monitor
The TPA3245DDV can serve as the power stage in an active studio monitor when the monitor accepts an analog line input and uses a passive crossover. Its 115 W stereo rating provides substantial continuous amplification for compact monitor cabinets, while the Class-D architecture improves efficiency and reduces the heat associated with power conversion. The output filter, crossover components, speaker impedance, and system response must be engineered together rather than selected independently. Use the manufacturer's reference configuration to maintain signal integrity and safe transistor operation.
Được đề xuất
Multi-Room Audio Amplifier
A multi-room audio amplifier can use the TPA3245DDV for a two-zone analog distribution stage, with each channel feeding a separate powered speaker network. The 12 V to 31.5 V operating range supports higher-power amplification, and the two-channel configuration provides a straightforward balance between output capability and board complexity. Because both zones would share one analog input source in this arrangement, channel selection and independent routing must be handled upstream. Maintain short, well-decoupled power paths and follow the manufacturer layout guidance to minimize switching-related interference.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TPA3245DDV — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TPA3245DDVR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 44-pin HTSSOP | 44-pin HTSSOP |
| Stereo Output Power | 115 W | 115 W |
| Mono Output Power | 230 W | 230 W |
| Supply Voltage Range | 12 V to 31.5 V | 12 V to 31.5 V |
| Input Type | Analog input | Analog input |
| Quiescent Current | 15.0 mA | 15.0 mA |
| Power Dissipation | 450 mW | 450 mW |
| Amplification Type | Class-D | Class-D |
| Channel Count | 2 channels | 2 channels |
Bảo phân biệt quan trọng
- Direct same-package ordering alternative (vsTPA3245DDVR)
- High stereo output capability (vsTPA3245DDVR)
- Single-package mono scaling (vsTPA3245DDVR)
Ghi chú thiết kế
Use the 115 W stereo and 230 W mono figures as maximum architecture ratings rather than assumed continuous output for every implementation. Estimate junction temperature from the actual dissipation, package thermal characteristics, PCB copper area, airflow, and ambient temperature. Keep the HTSSOP exposed-pad area unobstructed and use the manufacturer land pattern so heat can spread into the internal ground plane. Validate the hottest expected operating condition rather than testing only at short-duration peak load.
Design the 12 V to 31.5 V supply rail with local high-frequency decoupling placed directly beside the device pins and power grounds. Keep the high-current output loop compact and separate sensitive analog routing from switching-node and output-filter currents. The power stage should include protection appropriate to the selected speaker load and should not assume that every Class-D output configuration supports the same impedance. Confirm rail startup, load dump, and thermal behavior in the manufacturer application circuit.
Implement the 44-pin HTSSOP footprint and exposed-pad connection exactly as shown in the manufacturer land-pattern data. Route analog inputs away from power-stage switching nodes and output filters, maintain a quiet ground reference for the input stage, and minimize loop area in the supply path. Because no complete pin list is reproduced on this page, use the manufacturer pin-description table when assigning the analog inputs, control connections, ground pins, and exposed thermal pad.
Thông tin tuân thủ
The available product and distributor records do not state the requested compliance classifications. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Texas Instruments before release.