TPS4141-Q1 - 1200V Configurable Divider | Texas Instruments
MPN: TPS4141-Q1 ✓ Hoạt độngTPS4141-Q1 Tóm tắt
A high-voltage precision resistor divider is a specialized analog front-end IC that scales high-voltage inputs down to a safe range for downstream ADC or microcontroller measurement. It combines matched precision resistors with a PGA to maintain accuracy across temperature and voltage extremes, eliminating the need for discrete resistor networks and trimming. This architecture reduces board area and improves measurement reliability in high-voltage environments.
The TPS4141-Q1 integrates a high-voltage switch that connects or disconnects the high-voltage sense pin, providing uni-directional current blocking when disconnected. The programmable-gain amplifier supports four divider ratios using DIV0 and DIV1, enabling flexible measurement scaling for different voltage ranges. External precision reference voltage can be supplied from REF to HVGND for bi-directional voltage measurement, and switching between uni-directional and bi-directional sensing during operation is possible.
The device is AEC-Q100 qualified for automotive applications, ensuring robust performance over a wide temperature range. Its high-voltage capability and integrated switch make it suitable for battery management systems, traction inverters, and industrial motor drives where precise voltage monitoring is critical. The integrated PGA and matched resistors provide high accuracy, reducing system calibration overhead.
Typical applications include electric vehicle battery pack voltage monitoring, solar inverter DC bus sensing, and industrial 24V/48V system voltage measurement. The high-voltage switch allows the sense line to be disconnected for safety or power saving, while the divider ratios allow the same device to serve multiple voltage ranges. Designers should ensure proper PCB clearance and creepage distances for 1200V operation, and use the external REF for bi-directional measurements when needed.
Bộ thay thế dễ dàng lắp đặt cho TPS4141-Q1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TPS4141
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TPS4141-Q1 Tỷ lệ tối đa & tính chất điện
| Chức năng | High-voltage precision resistor divider with integrated programmable-gain amplifier |
| Maximum Sense Voltage | 1200 V |
| Divider Ratios | 4 configurable ratios via DIV0, DIV1 |
| Measurement Direction | Uni-directional or bi-directional |
| Integrated Switch | High-voltage switch for sense pin connect/disconnect |
| Reference Input | External REF to HVGND for bi-directional |
| Hộp | SOIC-11 (DWQ), 10.30mm x 10.30mm |
| Kiểu lắp đặt | Surface Mount |
| Số chân | 11 |
| Automotive Grade | AEC-Q100 Qualified |
| Trạng thái RoHS | unknown |
| Length | 10.30 mm |
| Width | 10.30 mm |
| Trạng thái vòng đời | Active |
Hướng dẫn cấu hình chân TPS4141-Q1 soic-11 (dwq), 10.30mm x 10.30mm
Cấu hình chân cho TPS4141-Q1 (soic-11 (dwq), 10.30mm x 10.30mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TPS4141-Q1.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TPS4141-Q1 phù hợp cho 6 Áp dụngs: Electric Vehicle Battery Pack Voltage Monitoring, Solar Inverter DC Bus Sensing, Industrial Motor Drive Voltage Monitoring, Traction Inverter Voltage Feedback, Data Center Power Monitoring, High-Voltage Test Equipment.
Electric Vehicle Battery Pack Voltage Monitoring
The TPS4141-Q1's 1200V rating and configurable divider ratios make it ideal for monitoring high-voltage battery packs in electric vehicles. The integrated PGA provides accurate scaling of the 400-800V pack voltage to a safe ADC range. The high-voltage switch enables disconnecting the sense line when the vehicle is off, saving power and ensuring safety. With AEC-Q100 qualification, it meets automotive reliability needs in harsh environments. The DIV0/DIV1 pins allow dynamic range adjustment for different pack configurations without hardware changes.
Được đề xuất
Solar Inverter DC Bus Sensing
Solar inverters have DC bus voltages up to 1000V, requiring precise measurement for MPPT and safety protection. The TPS4141-Q1 scales the DC bus voltage down with better accuracy than discrete resistor dividers, thanks to matched resistors and a PGA. The integrated high-voltage switch can disconnect the sense input during power-down, improving safety. The four gain settings provide flexibility for different inverter architectures. The SOIC-11 package fits compact inverter control boards, and low input leakage ensures high measurement accuracy.
Được đề xuất
Industrial Motor Drive Voltage Monitoring
In industrial motor drives, the DC bus voltage must be monitored for overvoltage and undervoltage protection. The TPS4141-Q1 handles voltages up to 1200V, covering common 400V and 690V drive systems. Its programmable-gain amplifier offers four divider ratios, enabling the same device to be used across multiple drive ratings. The bi-directional measurement capability supports negative bus monitoring in regenerative drives. The device's high CMRR and low noise reduce false trips, and its small SOIC-11 footprint saves board space.
Được đề xuất
Traction Inverter Voltage Feedback
Traction inverters in electric vehicles require fast and accurate DC bus voltage feedback. The TPS4141-Q1 provides the necessary high-voltage scaling with a programmable gain amplifier. The integrated switch disconnects the sense line during fault conditions. The AEC-Q100 qualification and wide temperature range ensure reliable operation under thermal stress. The four divider ratios allow tuning for 400V, 800V, or higher bus voltages. The device's low error contributes to accurate torque control, prolonging motor life.
Được đề xuất
Data Center Power Monitoring
In data center power distribution, monitoring high-voltage DC buses in new architectures requires precision. The TPS4141-Q1's matched resistor divider and PGA provide stable scaling for 300-800V rails. The bi-directional capability supports both positive and negative bus segments, useful in battery-backed designs. The integrated high-voltage switch enhances safety by isolating the sense pin when not needed. The small SOIC-11 allows high-density monitoring boards, and the device's configurable ratios reduce BOM proliferation across different voltage levels.
Được đề xuất
High-Voltage Test Equipment
Precision high-voltage test equipment needs accurate voltage conversion. The TPS4141-Q1's integrated matched resistors and programmable gain provide excellent ratio accuracy, reducing calibration requirements. The 1200V capability covers a wide range of instruments. The high-voltage switch can be used to disconnect the input during auto-ranging or safety interlock. The device supports external reference for accurate bi-directional measurements. Its SOIC-11 package fits standard test probes, and the four divider ratios allow a single design to cover multiple ranges.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TPS4141-Q1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TPS4141 |
|---|---|---|
| Package | SOIC-11 (DWQ) | SOIC-11 (DWQ) - assumed same |
| Brand | Texas Instruments | Texas Instruments |
| Automotive Grade | AEC-Q100 Qualified | Not AEC-Q100 (commercial) |
Bảo phân biệt quan trọng
- Only integrated high-voltage switch with uni-directional blocking (vsDiscrete resistor dividers)
- Programmable-gain amplifier with 4 ratios (vsFixed divider)
- AEC-Q100 automotive qualification (vsCommercial TPS4141)
Ghi chú thiết kế
For 1200V operation, maintain sufficient spacing between the high-voltage pin and low-voltage components. Follow IPC-2221 for creepage distances. Place the REF capacitor close to the REF pin for stable reference. Use a minimum isolation barrier of 6mm for 1200V DC per common safety standards.
Pins 9 and 10 have a known discrepancy between NC and HV on the EVM; verify with the datasheet before layout. Also ensure the external reference is grounded to HVGND for bi-directional measurement. Missing this connection can cause abnormal readings.
The device dissipates little power, but ensure the SOIC-11 package has adequate copper pour for heat spreading. At high ambient temperatures, verify the junction temperature stays within datasheet limits. Keep the high-voltage traces away from the REF pin to reduce thermal and electrical interference.
Thông tin tuân thủ
AEC-Q100 qualified per -Q1 suffix. RoHS/REACH status not verified in provided data.
