TPS610981 - 3.3V Ultra-Low IQ Boost + LDO | Texas Instruments
MPN: TPS610981DSET ✓ Hoạt độngTPS610981DSET Tóm tắt
A boost converter is a type of switching DC-DC power supply (part of the broader power management IC hierarchy) that steps an input voltage up to a higher regulated output using an inductor, switching FETs, and a control loop. Unlike a linear regulator, a boost converter can multiply battery voltage, making it essential when system electronics need 3.3V but the cell provides only 1.5V or a discharging Li-Ion cell falls below 3.3V. The TPS61098x family additionally integrates a second low-dropout linear regulator or load switch, eliminating an external LDO and board space.
Key features include synchronous rectification for high light-load efficiency, ultra-low quiescent current that extends battery life in always-on systems, integrated output discharge, and power good signaling per TI's product comparison data. The -40C to +85C operating range suits industrial and portable environments.
Technically, the synchronous topology removes the external Schottky diode, improving efficiency and reducing BOM count. The two-rail architecture lets designers power a microcontroller rail and a separate sensor or RF rail from one converter with excellent cross regulation.
Typical applications include battery-powered sensor nodes, energy harvesting systems, portable medical devices, and low-power IoT endpoints where every microamp of standby current matters.
Design consideration: because the input can be driven below 0.7V by a deeply discharged cell, verify minimum input and inrush behavior, and follow TI datasheet (Rev. F) layout guidance for short inductor and output capacitor traces to ensure loop stability.
Bộ thay thế dễ dàng lắp đặt cho TPS610981DSET — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TPS610981DSET (cùng hình factor và footprint) — khác nhau ở Battery Types Supported, Operating Temperature, Package, Topology.
TPS610982DSET
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TPS610980DSET
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TPS610981DSET Tỷ lệ tối đa & tính chất điện
| Cấu trúc | Synchronous Step-Up (Boost) with Integrated LDO |
| Số lượng đầu ra | 2 |
| Điện áp đầu ra | 3.3 V (fixed) |
| Minimum Input Voltage | Low input voltage operation (per TI product page) |
| Switching Topology | Synchronous rectification |
| Light-Load Efficiency | Optimized light-load efficiency feature |
| Output Discharge | Yes |
| Power Good | Yes |
| Hộp | 6-WSON (1.5 mm x 1.5 mm), DSG |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40C to +85C |
| Battery Types Supported | 1-cell alkaline/NiCd/NiMH, coin cell, 1-cell Li-Ion/Li-polymer |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân TPS610981DSET 6-wson (1.5 mm x 1.5 mm), dsg
Cấu hình chân cho TPS610981DSET (6-wson (1.5 mm x 1.5 mm), dsg gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho TPS610981DSET.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TPS610981DSET phù hợp cho 6 Áp dụngs: Battery-Powered IoT Sensor Nodes, Energy Harvesting Power Supplies, Portable Medical and Wearable Devices, Single-Cell Alkaline/NiMH Battery Systems, Low-Power Industrial Sensing and Metering, Backup / Hold-Up Power Rails.
Battery-Powered IoT Sensor Nodes
The TPS610981 fits IoT endpoint designs where a coin cell or single alkaline cell must power a 3.3V MCU and radio. Its ultra-low quiescent current keeps standby drain negligible during sleep intervals, while synchronous rectification maximizes light-load efficiency during intermittent transmit bursts. The integrated LDO provides a second clean rail for a sensitive RF or sensor load without an extra IC. Placed after the cell with a small boost inductor, it sustains regulation as the cell discharges below 3.3V, extending usable battery capacity and system lifetime in BLE beacons and smart-home sensors.
Được đề xuất
Energy Harvesting Power Supplies
In energy harvesting systems using small photovoltaic cells or thermoelectric generators, source voltage can fall well below the required rail. The TPS610981's low input voltage operation boosts these weak sources to a stable 3.3V, and its ultra-low quiescent current ensures harvested energy is not wasted in the converter itself. The power good output lets the system gate loads until the storage capacitor charges sufficiently, while output discharge safely resets the rail. This makes it well suited for indoor BLE asset tags and intermittent-duty environmental monitors running from harvested milliwatts.
Được đề xuất
Portable Medical and Wearable Devices
Wearable health patches and portable diagnostics need tiny, efficient power conversion with long battery life. The TPS610981's 1.5x1.5 mm 6-WSON package minimizes PCB area in body-worn form factors, and its two-rail architecture (boost plus integrated LDO) separates noisy digital rails from sensitive analog front-end supplies for biosensing amplifiers. Ultra-low quiescent current extends multi-week battery runtimes, and the -40C to +85C range covers sterilization and transport conditions. Fixed 3.3V output simplifies BOM management across product variants sharing one power design.
Được đề xuất
Single-Cell Alkaline/NiMH Battery Systems
Products running from one or two alkaline, NiCd, or NiMH cells need boost conversion as cell voltage sags from 1.5V toward 0.9V per cell. The TPS610981 is explicitly characterized by TI for these chemistries, with low input voltage operation maintaining 3.3V regulation deep into discharge. Synchronous rectification avoids the efficiency loss of a Schottky diode, and light-load optimization keeps idle current low between user interactions in remote controls, toys, and meters. The integrated LDO powers a secondary peripheral rail, replacing a separate linear regulator IC and saving board space.
Được đề xuất
Low-Power Industrial Sensing and Metering
Industrial battery-powered meters and sensor transmitters must operate for years without maintenance. The TPS610981's ultra-low quiescent current and power good supervision let designers implement duty-cycled acquisition: the MCU sleeps with rails discharged, wakes on an RTC or sensor interrupt, and only boosts when measurement is needed. Output discharge prevents residual rail leakage into sensors during sleep. The -40C to +85C range supports outdoor enclosures, and the compact WSON package suits dense transmitter PCBs with captive lithium or alkaline cells in utility submetering applications.
Được đề xuất
Backup / Hold-Up Power Rails
When a main system supply fails or a Li-Ion cell discharges below the logic rail, the TPS610981 can act as a backup boost path, drawing from the low cell voltage to hold a 3.3V rail alive for data logging or safe shutdown. Its low input voltage operation is essential near end-of-discharge, and the ultra-low quiescent current prevents needless drain of the reserve cell while standing by. The power good flag informs the host to enter shutdown sequences. This topology suits tamper logs, RTC keep-alive, and graceful-write protection in compact devices.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TPS610981DSET — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TPS610982DSET | TPS610980DSET |
|---|---|---|---|
| Package | 6-WSON (1.5x1.5 mm) | 6-WSON (1.5x1.5 mm) - same | 6-WSON (1.5x1.5 mm) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Second Rail Function | Integrated LDO | Integrated load switch | Integrated LDO |
| Quiescent Current | Ultra-low | Ultra-low (same family) | Ultra-low (same family) |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C |
| Synchronous Rectification | Yes | Yes | Yes |
| Power Good / Output Discharge | Yes / Yes | Yes / Yes | Yes / Yes |
Bảo phân biệt quan trọng
- Integrated LDO provides a second regulated rail (vsTPS610982DSET)
- Ultra-low quiescent current for battery life (vsTPS61291)
- Low input voltage operation from dying cells (vsTLV61225)
Ghi chú thiết kế
Follow TI TPS61098x datasheet (Rev. F) layout guidance: place the boost inductor and input/output capacitors as close as possible to the SW and VIN pins to minimize loop area. The 1.5x1.5 mm WSON requires short, wide traces; use the exposed die-pad (if present in the footprint) soldered to a grounded copper pour for thermal and ground integrity. Keep the LDO output capacitor adjacent to its pin for stability.
Verify input source impedance: coin cells and small alkaline cells have high internal resistance, and boost input pulsed current can cause voltage dips that trip the converter below its minimum operating voltage. Add a local bulk capacitor (10 uF-class, per datasheet) at VIN, and validate startup behavior at end-of-discharge cell voltage in your worst-case load scenario.
Do not confuse TPS610981 (integrated LDO) with TPS610982 (integrated load switch) - the second rail behaves differently and they are not functionally interchangeable without schematic review. Also note TI's own comparison lists TPS61291, TPS61299, and TLV61225 as different pinout devices; they cannot be swapped onto a TPS610981 footprint.
Thông tin tuân thủ
RoHS compliant per DigiKey categorization of standard TI WSON product. Other compliance fields not present in provided data.
