STMicroelectronics

TS555CDT - 2.7 MHz CMOS Timer | STMicroelectronics

MPN: TS555CDT ✓ Hoạt động
110 µA at 5 V Vdss Reduced compared with bipolar NE555 Id 8-pin SOIC Package 2.7 MHz Speed
MOQ: 1 |

TS555CDT Tóm tắt

The STMicroelectronics TS555CDT is a single CMOS programmable timer and oscillator rated for operation up to 2.7 MHz, with a typical supply current of 110 µA at 5 V, housed in an 8-pin SOIC package. The device supports a 2 V to 16 V supply range and provides the standard 555 timer functions in both astable and monostable configurations, combining low power consumption with substantially higher operating frequency than the classic bipolar NE555.

A programmable timer is an integrated circuit that generates or measures a time interval using external resistors and capacitors. The TS555 belongs to the 555 timer family within the broader clock and timing IC hierarchy. Its internal voltage reference, comparators, discharge transistor, and flip-flop allow one device to create periodic waveforms, produce fixed-duration pulses, or measure elapsed time. The CMOS implementation retains the familiar timing architecture while reducing supply current and output-transition current spikes.

Key features include a maximum timer frequency of 2.7 MHz, typical supply current of 110 µA at a 5 V supply, and operation across a 2 V to 16 V supply range. These characteristics suit battery-powered timers, low-cost automation circuits, pulse generators, debounce circuits, and general-purpose delay networks. Compared with a bipolar NE555, the CMOS TS555 provides substantially lower consumption and a much higher maximum frequency, supporting smaller timing capacitors and more compact high-frequency implementations.

The TS555 uses the standard 555 timing architecture and remains pin-compatible with the familiar 8-pin NE555 footprint. Timing accuracy is maintained in astable and monostable modes, while reduced supply-current spikes during output transitions can permit smaller decoupling capacitors than a bipolar implementation. The control-voltage pin provides a means of adjusting the internal threshold reference within the device's allowed range.

Typical applications include low-cost oscillators for LED blinking or clock generation, retriggerable and non-retriggerable monostable pulse circuits, transistor switching circuits, sensor debounce networks, delayed-action controls, and low-power embedded timing. In battery-operated products, its low typical supply current reduces standby burden, while the 16 V upper supply limit supports many 12 V industrial systems when voltage and dissipation conditions permit.

When implementing the device, calculate the timing resistors and capacitors for the required frequency and duty cycle, and place the timing capacitor directly at the threshold and trigger pins to minimize noise pickup. Use a stable reference capacitor at the control-voltage pin and provide adequate input bypassing. Confirm that the maximum frequency, supply voltage, output-load capability, and timing tolerances suit the intended operating environment.

This page combines the TS555CDT's principal electrical characteristics, package and pin information, application guidance, and pin-compatible sourcing considerations. It is intended to help engineers identify where the CMOS 555 architecture improves power consumption and frequency capability while preserving the standard timer interface.

Bộ thay thế dễ dàng lắp đặt cho TS555CDT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TS555CDT (cùng hình factor và footprint) — khác nhau ở Operating Modes, Package, Supply Voltage Range, Typical Supply Current, Timer Type.

STMicroelectronics
Supply Voltage Range: 2 V to 18 V
Typical Supply Current: 110 µA at VCC = 5 V
Timer Type: 555 Type, Single Timer/Oscillator
So sánh với TS555CDT →
STMicroelectronics
Operating Modes: Monostable and astable
Package: 8-SOIC, 0.154 inch body width
Timer Type: Single programmable timer/oscillator
So sánh với TS555CDT →

TS555IDT

✅ Drop-In
STMicroelectronics
📦 8-pin SOIC
Single programmable timer/oscillator · CMOS · 2.7 MHz · 2 V to 16 V · 110 µA at 5 V · 65 µA · -40°C to 125°C · 8-SOIC, 0.154 inch body width

Liên hệ để biết giá

Xem tài liệu →

TS555CDT Thông số kỹ thuật

Device Type Single CMOS programmable timer and oscillator
Maximum Frequency 2.7 MHz
Typical Supply Current 110 µA at 5 V
Supply Voltage Range 2 V to 16 V
Operating Modes Astable and monostable
Technology CMOS
Cấu hình đầu ra Single timer output
Hộp 8-pin SOIC
Kiểu lắp đặt Surface mount
Output Transition Supply-Current Spikes Reduced compared with bipolar NE555
Timing Accuracy Maintained in astable and monostable modes
Control Reference External control-voltage support

Cấu hình chân TS555CDT

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Chân 1 GND — Ground reference
Chân 2 TRIG — Trigger input
Chân 3 OUT — Timer output
Chân 4 RESET — Reset input
Chân 5 CTRL — Control voltage input
Chân 6 THRES — Threshold input
Chân 7 DISCH — Discharge output
Chân 8 VCC — Power supply

Ứng dụng tiêu biểu

TS555CDT phù hợp cho 6 Áp dụngs: Low-Power Monostable Pulse Generator, LED Flashing and Visual Indicator Oscillator, Industrial Sensor Debounce Circuit, Delay and Retriggerable Control Circuit, Switching and Driver Interface, High-Rate Low-Power Clock or Oscillator.

⚡

Low-Power Monostable Pulse Generator

The TS555CDT is well suited to producing a fixed-duration pulse from a trigger event in battery-powered or low-power control systems. Its CMOS architecture draws a typical 110 µA at 5 V, while astable and monostable timing remain accurate according to the STMicroelectronics datasheet. A resistor and timing capacitor at the threshold and trigger nodes establish the pulse width, while the discharge output can drive a transistor or controlled load. The 2 V minimum supply supports low-energy systems, although the timer, timing capacitor, leakage, and load current must be evaluated together. Use the output pin for the pulse signal and the reset pin for controlled initialization or emergency inhibit.

💡

LED Flashing and Visual Indicator Oscillator

TS555CDT can create a continuous square wave in astable mode to flash an LED, signal a status condition, or drive a low-cost visual indicator. Its maximum frequency of 2.7 MHz gives substantial timing headroom compared with the 0.1 MHz maximum cited for a bipolar NE555, although most LED indicators operate much lower. Two timing resistors and one capacitor determine frequency and duty cycle. The typical 110 µA supply current at 5 V is useful in compact portable products, while reduced output-transition current spikes simplify local bypassing. A current-limiting resistor is mandatory for an LED, and the indicator driver should not exceed the timer output's load capability.

🏭

Industrial Sensor Debounce Circuit

The TS555CDT provides a practical debounce and normalization stage for mechanical switches, reed sensors, or other slow-changing contacts. In a monostable configuration, contact noise can trigger a fixed output pulse instead of propagating multiple false transitions to a controller. The CMOS timer supports a 2 V to 16 V supply range, making it suitable for 5 V logic and many 12 V industrial arrangements when timing values remain within the required operating limits. Place the timing capacitor close to pins 2 and 6 to limit noise pickup, and connect the reset and control pins according to the manufacturer pin-description table. Validate the pulse width against the downstream controller's input filtering and safety requirements.

🔧

Delay and Retriggerable Control Circuit

TS555CDT can implement a delayed or retriggerable control action for relays, valves, and sequential machinery where a fixed timing interval improves repeatability. The monostable architecture accepts an initiating trigger and produces a controlled pulse whose duration is set by external timing components. Its 2.7 MHz maximum rating allows accurate use of relatively short intervals, and the typical 110 µA consumption at 5 V helps limit standby demand. For inductive loads, use a transistor or suitable driver rather than loading the output directly. Confirm whether retriggering matches the required control behavior, and ensure the external timing capacitor has suitable temperature coefficient and leakage characteristics for the required timing tolerance.

🔋

Switching and Driver Interface

The TS555CDT's discharge and output stages can support simple transistor-switching functions in power-control and signal-routing circuits. The discharge output operates with the standard 555 architecture, while the output provides a buffered timing signal. This arrangement is useful when a logic-level output cannot directly supply a transistor base, relay coil, or other higher-current load. The STMicroelectronics description notes reduced supply-current spikes during output transitions, helping maintain supply stability in compact battery-powered designs. Choose external transistor and resistor values for the load current, provide local supply decoupling, and keep high-current return paths separate from sensitive timing nodes to avoid shifting the switching threshold and degrading timing behavior.

🖥️

High-Rate Low-Power Clock or Oscillator

TS555CDT can generate a compact periodic clock where a dedicated oscillator would add unnecessary cost or board area. Its 2.7 MHz maximum frequency is much higher than the 0.1 MHz maximum cited for the bipolar NE555, enabling higher-rate waveforms when timing values and output rise time allow. Typical supply current of 110 µA at 5 V preserves low-power operation in embedded equipment. The frequency is set by the external resistor and capacitor network, while duty cycle depends on the two timing resistors. Keep the timing loop compact and away from switching nodes, and verify the actual waveform frequency and jitter on the final board because parasitic capacitance and supply ripple can alter the timing network.

Where can I download the TS555CDT datasheet PDF?
The TS555CDT datasheet can be downloaded from the STMicroelectronics document mirror identified on this page. The PDF describes the single CMOS timer, its 2 V to 16 V supply range, 2.7 MHz maximum frequency, 8-pin SOIC package, timing characteristics, and pin functions. Use the manufacturer datasheet as the controlling document during schematic design, component qualification, and PCB pin-assignment review.
What are the key specifications of TS555CDT that engineers should know?
The TS555CDT is a single CMOS timer capable of operating up to 2.7 MHz with a typical supply current of 110 µA at 5 V. It accepts a 2 V to 16 V supply and is packaged in an 8-pin SOIC. According to the STMicroelectronics TS555 datasheet, the device supports astable and monostable timing and uses the standard 8-pin 555 interface.
What is TS555CDT used for?
TS555CDT is used for astable oscillation, monostable pulse generation, timing, delay, debounce, and switching circuits. Its 2.7 MHz maximum frequency enables relatively high-rate timing networks, while its typical 110 µA current at 5 V suits low-power designs. The STMicroelectronics datasheet identifies both astable and monostable operation as principal operating modes.
What is the maximum frequency of TS555CDT?
The TS555CDT has a maximum frequency of 2.7 MHz, as stated in the STMicroelectronics TS555 datasheet and the product listing description. This frequency rating is substantially higher than the 0.1 MHz maximum associated with the bipolar NE555 cited in the same technical description. Actual operating frequency also depends on timing-component values, rise time, and output-drive capability.
How much current does TS555CDT consume?
The TS555CDT consumes a typical 110 µA at a 5 V supply. The STMicroelectronics datasheet description compares this value with a typical 3 mA for the bipolar NE555, demonstrating the TS555's lower operating consumption. Actual current can vary with supply voltage, operating mode, timing values, and output-transition activity.
What supply voltage range does TS555CDT support?
TS555CDT supports a 2 V to 16 V supply range. The STMicroelectronics product description identifies this operating range, allowing the same timer family to serve low-voltage battery systems and higher-voltage industrial circuits. The design must still observe all timing, output-current, and dissipation limits at the selected supply voltage.
Is TS555CDT pin compatible with NE555?
Yes, TS555CDT uses the standard 8-pin 555 interface and is described as pin-compatible with the NE555 footprint. The STMicroelectronics datasheet lists the familiar ground, trigger, output, reset, control, threshold, discharge, and supply connections. Package dimensions and the assembled footprint must still be checked during PCB-library review.
What can replace TS555CDT without changing the PCB?
TS555IDT is the closest identified same-manufacturer alternative because it is presented as another member of the TS555 family and shares the timer architecture. Its commercial temperature treatment differs from TS555CDT, so verify the full operating-temperature range before substitution. No other complete, package-and-pin-confirmed alternatives were established for direct production release.
Is TS555CDT the same as TS555IDT?
TS555CDT and TS555IDT are closely related STMicroelectronics TS555 variants rather than identical ordering codes. The product-family description identifies TS555IDT as a similar alternative, but the suffix denotes a different temperature-grade or product-option context. Confirm electrical ratings, marking, qualification requirements, and availability against the STMicroelectronics ordering information before treating it as interchangeable.
When should I choose TS555CDT over a bipolar NE555?
Choose TS555CDT when low supply current or operation above the NE555's 0.1 MHz maximum frequency matters. The STMicroelectronics description lists 110 µA typical consumption at 5 V for TS555CDT versus 3 mA typical for NE555, while TS555CDT reaches 2.7 MHz. A bipolar NE555 may still suit designs optimized around its higher output-drive behavior or established availability.
Is TS555CDT suitable for battery-powered timer circuits?
TS555CDT is suitable for battery-powered timer circuits because its typical supply current is 110 µA at 5 V. The STMicroelectronics datasheet also describes reduced supply-current spikes during output transitions, which can reduce the decoupling requirements of a low-power design. Select capacitors and resistors for the target battery voltage and required timing tolerance.
TS555CDT versus TS555IDT: which should I select?
Select TS555CDT when the TS555IDT-described variant does not meet the required commercial temperature range or other ordering conditions. Both are closely related STMicroelectronics TS555-family devices, but suffix-specific temperature ratings can make them unsuitable as unconditional substitutes. Review the pin definitions, supply limits, timing tolerances, and package markings before approving either device for a new production design.
What is the best NE555 equivalent for TS555CDT?
The best NE555 equivalent must match the TS555CDT's 8-pin SOIC footprint, pin functions, 2 V to 16 V supply range, and timing requirements. A bipolar NE555 is pin-compatible in principle, but the cited comparison shows lower current consumption and a lower 0.1 MHz maximum frequency for NE555. No specific cross-brand ordering code was confirmed as a complete drop-in match, so use the Request a Quote form to discuss approved sourcing options.
How do I find the TS555CDT pinout?
The TS555CDT pinout uses the standard 555 arrangement: pin 1 GND, pin 2 trigger, pin 3 output, pin 4 reset, pin 5 control voltage, pin 6 threshold, pin 7 discharge, and pin 8 supply. Confirm the numbering against the STMicroelectronics pin-description table and the SOIC-8 footprint, especially when adapting an existing NE555 board.
Where can I request a quote and current lead time for TS555CDT?
Use the Request a Quote form on this page to request current TS555CDT pricing, stock status, lead time, and order quantities. The device is an 8-pin SOIC single CMOS timer with a 2.7 MHz maximum frequency and a 2 V to 16 V supply range. The form is the appropriate channel for current commercial terms because pricing and inventory can change.

Dữ liệu tham khảo kỹ thuật cho TS555CDT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose TS555CDT for low-power astable or monostable circuits that need up to 2.7 MHz operation, a 2 V to 16 V supply, and the standard 8-pin 555 interface. Its typical 110 µA current at 5 V is substantially lower than the cited bipolar NE555 value of 3 mA. Select TS555IDT when its suffix-specific temperature and product-option ratings meet the design and it is the preferred available same-family configuration. Do not approve a bipolar NE555 solely from its familiar pinout: its cited 0.1 MHz maximum frequency and 3 mA typical current differ materially from TS555CDT, and output loading and temperature requirements must also be reviewed. For new designs, verify the timing network, control-pin bypass, output load, and package footprint against the selected manufacturer's datasheet before release.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này TS555IDT
Package 8-pin SOIC 8-pin SOIC
Brand STMicroelectronics STMicroelectronics
Maximum Frequency 2.7 MHz 2.7 MHz
Typical Supply Current 110 µA at 5 V 110 µA at 5 V
Supply Voltage Range 2 V to 16 V 2 V to 16 V
Operating Modes Astable and monostable Astable and monostable
Technology CMOS CMOS

Bảo phân biệt quan trọng

  • Higher maximum timing frequency than the cited bipolar NE555 (vsNE555)
  • Lower typical supply consumption than the cited bipolar NE555 (vsNE555)
  • Same-family sourcing option retains CMOS timing characteristics (vsTS555IDT)

Ghi chú thiết kế

Connect the timing capacitor directly between the THRES and TRIG pins, and keep the timing resistors close to the timer to minimize parasitic capacitance and noise pickup. Route the timer ground return toward the device ground rather than through high-current switching paths. The control pin normally uses a bypass capacitor to ground; follow the manufacturer reference circuit for the recommended value and stability requirements.

Place a local supply-decoupling capacitor close to VCC and provide a low-impedance return to the ground pin. Although the TS555CDT reduces supply-current spikes relative to a bipolar NE555, high-frequency layout still matters. Keep the decoupling loop compact, avoid sharing narrow return paths with motors or relays, and verify supply ripple at the timer pins because voltage variation can affect timing and threshold behavior.

Do not treat every NE555 as an automatic substitute. TS555CDT reaches 2.7 MHz and typically draws 110 µA at 5 V, while the bipolar NE555 comparison cites a 0.1 MHz maximum and 3 mA typical current. Before replacing TS555CDT, verify the SOIC-8 footprint, pin functions, output-drive capability, supply range, maximum frequency, and temperature-grade requirements in the selected component's datasheet.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The product descriptions identify a CMOS timer and commercial-oriented suffix context but do not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ts555 datasheet TS555CDT datasheet TS555CDT datasheet pdf TS555CDT pinout TS555CDT specifications TS555CDT 2.7 MHz TS555CDT SOIC-8 TS555CDT equivalent TS555CDT replacement TS555CDT cross reference TS555CDT vs TS555IDT STMicroelectronics TS555CDT TS555CDT price TS555CDT stock TS555CDT monostable application

Các bộ phận và thuật ngữ liên quan

STMicroelectronics TS555CDT TS555IDT NE555 CMOS timer programmable timer oscillator clock and timing IC astable mode monostable mode 2.7 MHz 110 µA at 5 V 2 V to 16 V supply 8-pin SOIC SOIC package family surface-mount package trigger input threshold input discharge output control voltage timing resistor timing capacitor monostable pulse generation sensor debounce low-power electronics
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ