VSC8247YJB-01 - 10G Quad CDR with EDC | Microchip
MPN: VSC8247YJB-01 ✓ Hoạt độngVSC8247YJB-01 Tóm tắt
A clock and data recovery IC is a high-speed interface component that reconstructs a usable clock from a received serial data stream. Where the incoming signal has experienced timing jitter or channel dispersion, the CDR detects timing deviation and adjusts its recovered clock. EDC adds adaptive equalization to compensate for signal degradation, making the VSC8247YJB-01 suitable for demanding serial links rather than ordinary low-speed interface recovery.
The primary features of the device are four independent recovery channels, four clock outputs, an 8.5 Gbps to 11.3 Gbps operating range, and integrated adaptive EDC. These characteristics allow one device to serve multiple high-speed lanes in a networking or storage system. The four-output architecture can reduce the number of discrete recovery components required when a board must recover several related signals.
Technically, the VSC8247YJB-01 combines clock and data recovery with adaptive dispersion compensation in a single 144-FCBGA package. This integration places timing recovery and channel-loss mitigation beside the physical-layer receive path. The listed protocol support gives designers a practical framework for selecting operating modes, although configuration, reference-clock, media, and electrical requirements must be confirmed against the manufacturer documentation before a board is released.
Typical applications include 10G Ethernet ports, SONET/SDH equipment, 8G Fibre Channel links, and 10G QDR InfiniBand interfaces. It can also support multi-lane backplanes, optical-module receive paths, network-interface controllers, and high-speed test equipment where deterministic clock recovery and channel equalization are important.
A critical design consideration is that recovery performance depends on the complete channel, including transmitter characteristics, trace losses, connectors, clocking, and receive equalization. PCB layout, power distribution, reference decoupling, and input signal integrity must therefore be developed as part of the high-speed design rather than added after schematic completion.
This page organizes the device protocol, package, speed, and channel information into an engineering-focused guide, adds application analysis, and clearly identifies the electrical, pinout, lifecycle, and drop-in replacement details that still require manufacturer confirmation.
Bộ thay thế dễ dàng lắp đặt cho VSC8247YJB-01 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếVSC8247YJB-01 Thông số kỹ thuật
| Product Type | Quad-channel clock and data recovery IC with adaptive EDC |
| Manufacturer | Microchip Technology |
| Recovery Channels | 4 channels |
| Clock Outputs | 4 outputs |
| Operating Data Rate | 8.5 Gbps to 11.3 Gbps per channel |
| Supported Protocol | 10G Ethernet |
| Supported Protocol | SONET |
| Supported Protocol | 8G Fibre Channel |
| Supported Protocol | 10G QDR InfiniBand |
| Equalization Technology | Adaptive electronic dispersion compensation (EDC) |
| Hộp | 144-FCBGA, 13 mm x 13 mm |
| Mounting Technology | Surface mount |
| Terminal Finish | Pb-free |
| Số chân | 144 pins |
Hướng dẫn cấu hình chân VSC8247YJB-01 144-fcbga, 13 mm x 13 mm
Cấu hình chân cho VSC8247YJB-01 (144-fcbga, 13 mm x 13 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho VSC8247YJB-01.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
VSC8247YJB-01 phù hợp cho 6 Áp dụngs: 10G Ethernet Receive Interface, SONET and SDH Line Interface, 8G Fibre Channel Link, 10G QDR InfiniBand Interface, Optical Module Receive Path, High-Speed Network Interface Controller.
10G Ethernet Receive Interface
The VSC8247YJB-01 fits a 10G Ethernet receive path because it supports 10G Ethernet and operates across an 8.5 Gbps to 11.3 Gbps range. Its four-channel clock and data recovery architecture can recover timing from multiple lanes, while adaptive electronic dispersion compensation helps mitigate channel degradation. Placing the device near the high-speed receiver minimizes trace loss before clock recovery and equalization. Designers should verify the exact Ethernet variant, reference clock, lane polarity, configuration registers, and recovered-clock requirements in the manufacturer documentation before layout is released.
SONET and SDH Line Interface
The VSC8247YJB-01 is applicable to SONET and SDH equipment because SONET is among its explicitly listed protocols. Clock and data recovery is fundamental to high-speed line systems, where timing jitter and transmission loss can impair the serial signal before it reaches the digital layer. The device combines four recovery channels with adaptive EDC for dispersion compensation. In a line-card design, engineers should place the device close to the optical or copper receive components, preserve short return paths, and confirm line rate, reference-clock frequency, jitter tolerance, and protocol-specific configuration.
8G Fibre Channel Link
The VSC8247YJB-01 supports 8G Fibre Channel at a signal rate within its 8.5 Gbps to 11.3 Gbps operating envelope. Its clock and data recovery function extracts a stable timing reference from the incoming high-speed stream, while adaptive EDC compensates for channel dispersion and loss. This combination is useful in storage controllers, host bus adapters, and backplane-facing Fibre Channel ports. Designers must validate the exact Fibre Channel variant, lane count, recovered-clock output arrangement, reference source, and board-level insertion-loss margin before adopting the device.
10G QDR InfiniBand Interface
The VSC8247YJB-01 can support a 10G QDR InfiniBand receive interface because that protocol is explicitly identified in the product listing. Four recovery channels and four outputs can serve multi-lane connectivity requirements, while adaptive EDC addresses signal degradation across the channel. In an InfiniBand adapter or switch design, the device should be positioned near the connector or transceiver receive path to limit uncontrolled loss and timing distortion. Confirm lane mapping, reference-clock topology, protocol timing margins, and any firmware or configuration dependencies before production release.
Optical Module Receive Path
The VSC8247YJB-01 can be used in an optical-module receive path where incoming high-speed data requires clock recovery and compensation for channel dispersion. Its 8.5 Gbps to 11.3 Gbps range and adaptive EDC make it relevant to 10G-class optical links, including Ethernet and Fibre Channel implementations. Position the device close to the receiver outputs to minimize additional trace loss, maintain continuous ground references under high-speed nets, and validate transmitter waveform, loss budget, reference-clock quality, and recovered-clock jitter against the optical subsystem requirements.
High-Speed Network Interface Controller
The VSC8247YJB-01 is suited to a high-speed network interface controller that must recover timing and data from external serial links. Its four-channel architecture permits consolidation of multiple 10G-class lanes within one package, reducing component count compared with four unrelated recovery devices. The design still requires careful partitioning between transceiver outputs, CDR inputs, and recovered-clock destinations to avoid crosstalk and clock-quality degradation. Use short matched routes, solid reference planes, and verified power sequencing, then validate interoperability with the selected PHY, serializer, optical module, or copper channel.
Dữ liệu tham khảo kỹ thuật cho VSC8247YJB-01 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Bảo phân biệt quan trọng
- Four high-speed recovery channels combined in one package (vsA single-channel CDR)
- Integrated adaptive dispersion compensation (vsA clock and data recovery IC without integrated EDC)
- Broad high-speed protocol coverage in one recovery device (vsA protocol-specific single-rate CDR)
Ghi chú thiết kế
Route each high-speed input directly to its corresponding 144-FCBGA ball with the shortest practical trace, avoiding layer changes and unnecessary test pads. Maintain a continuous reference plane beneath the interface region so that return current does not cross a plane split. The four-lane architecture makes trace-to-ball skew especially important: check lane-length, loss, and crosstalk margins together instead of optimizing one channel independently.
Connect every ground ball to the ground plane with minimal via inductance and place the manufacturer's prescribed power and ground decoupling close to the associated package balls. Separate supply routing from recovered-clock and high-speed data paths to reduce coupling into the timing-recovery circuitry. Verify the power-up sequence, voltage tolerance, and decoupling network against the manufacturer documentation before fabricating the board.
Validate the complete receive channel from the transmitter or transceiver through connectors, packages, PCB traces, and the CDR input. Confirm insertion loss, return loss, impedance, skew, and jitter at the supported 8.5 Gbps to 11.3 Gbps rates. Adaptive EDC improves tolerance for channel dispersion, but it does not eliminate poor routing, reflection, crosstalk, or an unsuitable reference clock.
Do not substitute a device merely because its data-rate range overlaps. A drop-in decision requires the same 144-FCBGA footprint, ball map, reference-clock architecture, lane configuration, protocol support, and reset or power-sequencing behavior. Also check whether the original assembly uses a thermal design with exposed package features; thermal management and solder assembly requirements must remain compatible with the production PCB.
Thông tin tuân thủ
The product listing identifies the VSC8247YJB-01 as Pb-free. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from Microchip.