Microchip Technology

VSC8247YJB-01 - 10G Quad CDR with EDC | Microchip

MPN: VSC8247YJB-01 ✓ פעיל
144-FCBGA, 13 mm x 13 mm Package 4 outputs Speed
כמות הזמנה מינימלית: 1 |

VSC8247YJB-01 סקירה

The Microchip Technology VSC8247YJB-01 is a quad-channel clock and data recovery IC with adaptive electronic dispersion compensation (EDC), four outputs, and a 144-FCBGA package measuring 13 mm by 13 mm. It operates from 8.5 Gbps to 11.3 Gbps per channel and supports 10G Ethernet, SONET, 8G Fibre Channel, and 10G QDR InfiniBand protocols.

A clock and data recovery IC is a high-speed interface component that reconstructs a usable clock from a received serial data stream. Where the incoming signal has experienced timing jitter or channel dispersion, the CDR detects timing deviation and adjusts its recovered clock. EDC adds adaptive equalization to compensate for signal degradation, making the VSC8247YJB-01 suitable for demanding serial links rather than ordinary low-speed interface recovery.

The primary features of the device are four independent recovery channels, four clock outputs, an 8.5 Gbps to 11.3 Gbps operating range, and integrated adaptive EDC. These characteristics allow one device to serve multiple high-speed lanes in a networking or storage system. The four-output architecture can reduce the number of discrete recovery components required when a board must recover several related signals.

Technically, the VSC8247YJB-01 combines clock and data recovery with adaptive dispersion compensation in a single 144-FCBGA package. This integration places timing recovery and channel-loss mitigation beside the physical-layer receive path. The listed protocol support gives designers a practical framework for selecting operating modes, although configuration, reference-clock, media, and electrical requirements must be confirmed against the manufacturer documentation before a board is released.

Typical applications include 10G Ethernet ports, SONET/SDH equipment, 8G Fibre Channel links, and 10G QDR InfiniBand interfaces. It can also support multi-lane backplanes, optical-module receive paths, network-interface controllers, and high-speed test equipment where deterministic clock recovery and channel equalization are important.

A critical design consideration is that recovery performance depends on the complete channel, including transmitter characteristics, trace losses, connectors, clocking, and receive equalization. PCB layout, power distribution, reference decoupling, and input signal integrity must therefore be developed as part of the high-speed design rather than added after schematic completion.

This page organizes the device protocol, package, speed, and channel information into an engineering-focused guide, adds application analysis, and clearly identifies the electrical, pinout, lifecycle, and drop-in replacement details that still require manufacturer confirmation.

חלופות תחליף ישיר עבור VSC8247YJB-01 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

VSC8247YJB-01 מפרטים

Product Type Quad-channel clock and data recovery IC with adaptive EDC
Manufacturer Microchip Technology
Recovery Channels 4 channels
Clock Outputs 4 outputs
Operating Data Rate 8.5 Gbps to 11.3 Gbps per channel
Supported Protocol 10G Ethernet
Supported Protocol SONET
Supported Protocol 8G Fibre Channel
Supported Protocol 10G QDR InfiniBand
Equalization Technology Adaptive electronic dispersion compensation (EDC)
מארז 144-FCBGA, 13 mm x 13 mm
Mounting Technology Surface mount
Terminal Finish Pb-free
מספר פינים 144 pins

מדריך תצורת פינים של VSC8247YJB-01 144-fcbga, 13 mm x 13 mm

תצורת פינים עבור VSC8247YJB-01 (מארזת 144-fcbga, 13 mm x 13 mm). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 144-fcbga, 13 mm x 13 mm עבור VSC8247YJB-01

אין נתוני פריסת פינים מפורטים עבור VSC8247YJB-01.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

VSC8247YJB-01 מתאים עבור 6 יישוםs: 10G Ethernet Receive Interface, SONET and SDH Line Interface, 8G Fibre Channel Link, 10G QDR InfiniBand Interface, Optical Module Receive Path, High-Speed Network Interface Controller.

🌐

10G Ethernet Receive Interface

The VSC8247YJB-01 fits a 10G Ethernet receive path because it supports 10G Ethernet and operates across an 8.5 Gbps to 11.3 Gbps range. Its four-channel clock and data recovery architecture can recover timing from multiple lanes, while adaptive electronic dispersion compensation helps mitigate channel degradation. Placing the device near the high-speed receiver minimizes trace loss before clock recovery and equalization. Designers should verify the exact Ethernet variant, reference clock, lane polarity, configuration registers, and recovered-clock requirements in the manufacturer documentation before layout is released.

🌐

SONET and SDH Line Interface

The VSC8247YJB-01 is applicable to SONET and SDH equipment because SONET is among its explicitly listed protocols. Clock and data recovery is fundamental to high-speed line systems, where timing jitter and transmission loss can impair the serial signal before it reaches the digital layer. The device combines four recovery channels with adaptive EDC for dispersion compensation. In a line-card design, engineers should place the device close to the optical or copper receive components, preserve short return paths, and confirm line rate, reference-clock frequency, jitter tolerance, and protocol-specific configuration.

🖥️

8G Fibre Channel Link

The VSC8247YJB-01 supports 8G Fibre Channel at a signal rate within its 8.5 Gbps to 11.3 Gbps operating envelope. Its clock and data recovery function extracts a stable timing reference from the incoming high-speed stream, while adaptive EDC compensates for channel dispersion and loss. This combination is useful in storage controllers, host bus adapters, and backplane-facing Fibre Channel ports. Designers must validate the exact Fibre Channel variant, lane count, recovered-clock output arrangement, reference source, and board-level insertion-loss margin before adopting the device.

🖥️

10G QDR InfiniBand Interface

The VSC8247YJB-01 can support a 10G QDR InfiniBand receive interface because that protocol is explicitly identified in the product listing. Four recovery channels and four outputs can serve multi-lane connectivity requirements, while adaptive EDC addresses signal degradation across the channel. In an InfiniBand adapter or switch design, the device should be positioned near the connector or transceiver receive path to limit uncontrolled loss and timing distortion. Confirm lane mapping, reference-clock topology, protocol timing margins, and any firmware or configuration dependencies before production release.

📡

Optical Module Receive Path

The VSC8247YJB-01 can be used in an optical-module receive path where incoming high-speed data requires clock recovery and compensation for channel dispersion. Its 8.5 Gbps to 11.3 Gbps range and adaptive EDC make it relevant to 10G-class optical links, including Ethernet and Fibre Channel implementations. Position the device close to the receiver outputs to minimize additional trace loss, maintain continuous ground references under high-speed nets, and validate transmitter waveform, loss budget, reference-clock quality, and recovered-clock jitter against the optical subsystem requirements.

🖥️

High-Speed Network Interface Controller

The VSC8247YJB-01 is suited to a high-speed network interface controller that must recover timing and data from external serial links. Its four-channel architecture permits consolidation of multiple 10G-class lanes within one package, reducing component count compared with four unrelated recovery devices. The design still requires careful partitioning between transceiver outputs, CDR inputs, and recovered-clock destinations to avoid crosstalk and clock-quality degradation. Use short matched routes, solid reference planes, and verified power sequencing, then validate interoperability with the selected PHY, serializer, optical module, or copper channel.

What is the VSC8247YJB-01?
The VSC8247YJB-01 is a Microchip Technology quad-channel clock and data recovery IC with adaptive electronic dispersion compensation. It provides four recovery channels, four clock outputs, and an 8.5 Gbps to 11.3 Gbps operating range in a 144-FCBGA package. According to the Microchip product listing, it supports 10G Ethernet, SONET, 8G Fibre Channel, and 10G QDR InfiniBand protocols.
What data rates does the VSC8247YJB-01 support?
The VSC8247YJB-01 supports serial data rates from 8.5 Gbps to 11.3 Gbps per channel. This range covers the protocol families identified by Microchip, including 10G Ethernet, SONET, 8G Fibre Channel, and 10G QDR InfiniBand. Confirm the exact operating mode, lane rate, reference clock, and configuration requirements against the manufacturer documentation before using the device in a new design.
What package does the VSC8247YJB-01 use?
The VSC8247YJB-01 uses a 144-FCBGA package measuring 13 mm by 13 mm. The product listing identifies the package as 144-FCBGA and describes the device as a four-output Ethernet, SONET, and SONET/SDH clock and data recovery IC. Because the package has 144 fine-pitch terminals, the land pattern, escape routing, and assembly process must follow the manufacturer footprint.
Where can I download the VSC8247YJB-01 datasheet PDF?
The VSC8247YJB-01 datasheet PDF should be obtained through the official Microchip product documentation or its secure document-delivery system. The available product listing does not expose a permanent public PDF URL. Use the exact MPN to locate the current manufacturer document, including the pin-description table, electrical limits, reference-clock requirements, and recommended application circuit.
Where can I find the VSC8247YJB-01 pinout?
The VSC8247YJB-01 pinout is defined by the manufacturer datasheet for the 144-FCBGA package. The component listing identifies a 144-FCBGA with 13 mm by 13 mm dimensions but does not publish the terminal map. Use the manufacturer pin-description table when assigning ball locations and preserve the documented pin-1 orientation and exposed or unused-ball requirements.
What can replace the VSC8247YJB-01?
No verified drop-in replacement for the VSC8247YJB-01 can be identified from the available cross-reference information. A true replacement must match the 144-FCBGA footprint, pin arrangement, clock architecture, lane data rates, reference-clock requirements, and supported protocols. The manufacturer cross-reference search is the appropriate place to check for a newer Microchip device, but a parametric match alone does not establish drop-in compatibility.
Is there a Microchip equivalent for the VSC8247YJB-01?
No specific Microchip equivalent is established by the available cross-reference results. The Microchip cross-reference search can compare a known competitor part or family with current Microchip options, but the resulting device must still be checked for the identical 144-FCBGA footprint and electrical timing requirements. Do not treat a search result as drop-in compatible without those confirmations.
What is the best equivalent for the VSC8247YJB-01?
The best equivalent must be a pin-compatible 144-FCBGA device with four CDR lanes, four clock outputs, adaptive EDC, and operation across the required 8.5 Gbps to 11.3 Gbps range. No alternative MPN is verified as satisfying all of these conditions. Use the Request a Quote form on this page for sourcing support and provide the exact protocol, lane rate, reference clock, and PCB revision when evaluating replacements.
When should I choose the VSC8247YJB-01?
Choose the VSC8247YJB-01 when the design needs four high-speed recovery channels, four outputs, adaptive dispersion compensation, and support for at least one of its listed protocols. It is particularly relevant to 10G Ethernet, SONET, 8G Fibre Channel, or 10G QDR InfiniBand links. Choose another device only after confirming that its lane rates, clocking method, equalization, protocol coverage, and package satisfy the complete channel specification.
Is the VSC8247YJB-01 suitable for a 10G Ethernet interface?
Yes, the VSC8247YJB-01 is suitable for a 10G Ethernet receive path because its listed protocol support includes 10G Ethernet and its operating range reaches 11.3 Gbps. Suitability also depends on the exact Ethernet variant, reference clock, lane arrangement, board-level channel loss, and configuration. Validate those requirements with Microchip before releasing the design.
VSC8247YJB-01 vs a single-channel CDR: which is better?
The VSC8247YJB-01 is better when four related high-speed lanes must be recovered in one component, because it combines four recovery channels, four outputs, and adaptive EDC in one package. A single-channel CDR may be more appropriate for a low-lane-count design needing less area and power. The comparison must include lane rate, protocol, reference clock, recovery performance, package, and total board space.
What is the difference between a CDR and adaptive EDC?
A clock and data recovery circuit restores a coherent clock from a serial data stream and compensates for timing variation. Adaptive electronic dispersion compensation additionally estimates and corrects channel-related signal degradation. In the VSC8247YJB-01, the CDR handles clock recovery while the EDC function addresses dispersion, allowing one device to address both timing and channel-loss effects.
How should the VSC8247YJB-01 be de-coupled on a PCB?
Place the device's power and ground connections directly beneath the relevant 144-FCBGA balls and connect them to the power and ground planes through short, low-inductance paths. Follow the manufacturer values for supply capacitance and decoupling placement. Keep high-speed input and clock routing away from switching nodes and noisy digital return paths, and use plane-via transitions or stitching vias to maintain return-path continuity.
Where to buy the VSC8247YJB-01 online?
Use the Request a Quote form on this page to request the VSC8247YJB-01, current availability, lead time, and required packaging. A listing describes the part as Pb-free and identifies its 144-FCBGA package, but no quantity-priced commercial listing qualifies for structured price extraction. Include your required quantity, date code preference, target country, and whether the purchase is for prototype or production use.
What is the price of the VSC8247YJB-01?
The current commercial price for the VSC8247YJB-01 must be obtained through the Request a Quote form on this page. No distributor result provides an explicit quantity-break table for this exact MPN, so a numeric price cannot be reliably reproduced. Request a quotation with your quantity and packaging requirements to receive a current quote and a lead-time response for the 144-FCBGA device.
What is the lead time and stock status for the VSC8247YJB-01?
Current stock and lead time for the VSC8247YJB-01 should be confirmed through the Request a Quote form on this page. The product information does not establish a factory lead-time range or a guaranteed stock quantity, and one marketplace reference showing inventory does not prove current availability. Provide the required quantity, target date, and acceptable date codes when requesting supply confirmation.
What are the key specifications of the VSC8247YJB-01 that engineers should know?
The key VSC8247YJB-01 specifications are four recovery channels, four clock outputs, an 8.5 Gbps to 11.3 Gbps operating range, adaptive electronic dispersion compensation, and a 144-FCBGA package measuring 13 mm by 13 mm. The device supports 10G Ethernet, SONET, 8G Fibre Channel, and 10G QDR InfiniBand. Supply voltage, power consumption, temperature range, and reference-clock details require confirmation from the manufacturer datasheet.

נתוני עזר הנדסיים עבור VSC8247YJB-01 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the VSC8247YJB-01 when a board needs four high-speed CDR lanes, four recovered-clock outputs, and adaptive dispersion compensation within an 8.5 Gbps to 11.3 Gbps operating range. Its listed support for 10G Ethernet, SONET, 8G Fibre Channel, and 10G QDR InfiniBand makes it appropriate for multi-lane networking, storage, optical-interface, and line-card designs. A single-channel CDR may be preferable when only one lane is required and minimizing area, power, or cost is more important than integration. Before choosing another family, verify the exact protocol variant, reference clock, recovered-clock arrangement, electrical limits, and 144-FCBGA footprint. No drop-in substitute is established here; treat any proposed replacement as a new engineering review unless Microchip confirms compatibility.

מבדילים עיקריים

  • Four high-speed recovery channels combined in one package (לעומתA single-channel CDR)
  • Integrated adaptive dispersion compensation (לעומתA clock and data recovery IC without integrated EDC)
  • Broad high-speed protocol coverage in one recovery device (לעומתA protocol-specific single-rate CDR)

הערות תכנון

Route each high-speed input directly to its corresponding 144-FCBGA ball with the shortest practical trace, avoiding layer changes and unnecessary test pads. Maintain a continuous reference plane beneath the interface region so that return current does not cross a plane split. The four-lane architecture makes trace-to-ball skew especially important: check lane-length, loss, and crosstalk margins together instead of optimizing one channel independently.

Connect every ground ball to the ground plane with minimal via inductance and place the manufacturer's prescribed power and ground decoupling close to the associated package balls. Separate supply routing from recovered-clock and high-speed data paths to reduce coupling into the timing-recovery circuitry. Verify the power-up sequence, voltage tolerance, and decoupling network against the manufacturer documentation before fabricating the board.

Validate the complete receive channel from the transmitter or transceiver through connectors, packages, PCB traces, and the CDR input. Confirm insertion loss, return loss, impedance, skew, and jitter at the supported 8.5 Gbps to 11.3 Gbps rates. Adaptive EDC improves tolerance for channel dispersion, but it does not eliminate poor routing, reflection, crosstalk, or an unsuitable reference clock.

Do not substitute a device merely because its data-rate range overlaps. A drop-in decision requires the same 144-FCBGA footprint, ball map, reference-clock architecture, lane configuration, protocol support, and reset or power-sequencing behavior. Also check whether the original assembly uses a thermal design with exposed package features; thermal management and solder assembly requirements must remain compatible with the production PCB.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Yes
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The product listing identifies the VSC8247YJB-01 as Pb-free. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from Microchip.

הנתונים אומתו בתאריך: 2026-11-11 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

VSC8247YJB-01 datasheet VSC8247YJB-01 pinout VSC8247YJB-01 datasheet pdf VSC8247YJB-01 equivalent VSC8247YJB-01 replacement VSC8247YJB-01 cross reference VSC8247YJB-01 footprint VSC8247YJB-01 144-FCBGA Microchip VSC8247YJB-01 VSC8247YJB-01 10G Ethernet VSC8247YJB-01 SONET VSC8247YJB-01 Fibre Channel VSC8247YJB-01 price VSC8247YJB-01 stock

רכיבים ומונחים קשורים

Microchip Technology VSC8247YJB-01 clock and data recovery CDR quad-channel CDR adaptive electronic dispersion compensation EDC 10G Ethernet SONET SDH 8G Fibre Channel 10G QDR InfiniBand 144-FCBGA BGA package family surface-mount technology SMD 8.5 Gbps 11.3 Gbps four clock outputs reference clock dispersion compensation timing jitter Pb-free high-speed serial interface
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר