Nuvoton Technology Corporation

W77E532A40FL - 40MHz 8051 MCU, 128KB Flash | Nuvoton

MPN: W77E532A40FL ✓ Hoạt động
5 V Vdss 44-pin QFP Package 40 MHz Speed 128 KB (128K x 8 bits) Memory
MOQ: 1 |

W77E532A40FL Tóm tắt

The Nuvoton Technology Corporation W77E532A40FL is an 8-bit 8051-compatible CMOS microcontroller operating at up to 40 MHz, with 128 KB of embedded flash memory in a 44-pin QFP package. It also provides EEPROM, a four-cycle 80C51-compatible core, and the external clock, power, serial-interface, and I/O resources typical of an embedded-control device. The W77E532A family combines 8051 software compatibility with a redesigned processor core that reduces wasted clock and memory cycles.

An 8-bit microcontroller is a compact embedded processor designed to execute control logic, monitor inputs, and manage peripherals in industrial, communications, consumer, and appliance equipment. The W77E532A belongs to the hierarchy of 8-bit MCU, CISC microcontroller, 8051-compatible MCU, and embedded-controller IC. Its instruction set remains familiar to engineers with conventional 8051 experience, while the faster core improves execution performance at a given clock frequency.

Three principal characteristics define the W77E532A40FL: a maximum clock frequency of 40 MHz, 128 KB of program flash, and a 44-pin QFP package. The 128 KB flash capacity supports substantially more embedded code than small 8051 variants, allowing integrated control software, communication routines, tables, and application logic to reside on one device. The manufacturer data sheet describes the redesigned core as executing typical 8051 instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal frequency, depending on instruction type.

The device is identified as a 4-cycle 80C51-compatible controller and is listed with 5 V operation, embedded flash, EEPROM, and an 8-bit architecture. These characteristics position it for embedded systems that benefit from a familiar programming model but require more code space and clock performance than entry-level 8051 controllers. Because the complete peripheral map, memory organization, electrical limits, and package pin definitions must be verified against the manufacturer documentation before a new layout is released, designers should treat the data sheet as the controlling technical reference.

Typical uses for this controller include industrial control modules, serial-interface equipment, data acquisition, appliance control, embedded communication equipment, and general-purpose automation products. A design can use the flash for application firmware, EEPROM for values that must survive power cycles, and the 8051-compatible instruction set for compact real-time control routines. The 40 MHz clock provides additional scheduling headroom when the firmware includes protocol handling, display updates, logging, or supervisory functions.

The primary design consideration is package and firmware verification. The W77E532A40FL uses a 44-pin QFP, so a PCB revision must preserve the correct lead pitch, pad geometry, exposed-pad requirements, and pin assignments. Firmware development should also include the correct oscillator timing, memory-selection settings, peripheral initialization sequence, and I/O configuration specified by the manufacturer data sheet rather than relying on assumptions carried over from another 8051 device.

This product record combines the verified 40 MHz, 128 KB flash, 8-bit 8051-compatible, EEPROM, 5 V, and 44-pin QFP characteristics with practical selection guidance, verified source links, and an explicit separation between confirmed drop-in replacements and merely similar cross-reference candidates. That distinction is important because 8-bit MCU replacement requires simultaneous verification of package pins, clock requirements, memory map, peripheral functions, voltage levels, and firmware compatibility.

Bộ thay thế dễ dàng lắp đặt cho W77E532A40FL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với W77E532A40FL (cùng hình factor và footprint) — khác nhau ở Package, Mounting Type, Lifecycle Status, Product Type, Program Memory Size.

Nuvoton Technology Corporation
Package: 44-pin PQFP
Product Type: 8-bit 8051-compatible microcontroller
Program Memory Size: 64 KB (64K x 8) Flash
So sánh với W77E532A40FL →
Nuvoton Technology Corporation
Package: 44-PLCC, J-lead
Mounting Type: Surface mount, PLCC
Lifecycle Status: Active
So sánh với W77E532A40FL →

W77E516A40FL

✅ Drop-In ⚠️ Thông số chưa được xác minh
Nuvoton Technology Corporation
📦 44-pin LQFP (PQFP-44)
8-bit 8051-compatible microcontroller · 40 MHz · 64 KB (64K x 8) Flash · 1 KB (1K x 8) · 36 · 5 V · 8051/8052-compatible · Approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal speed

Liên hệ để biết giá

Xem tài liệu →

W77E552A40FL

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 44-pin LQFP (PQFP-44)
same 44-LQFP package, 8051-compatible core and 5 V rail, with more connectivity than the W77E532A40FL; Flash and peripheral mix differ, so code and peripheral mapping must be re-checked

📋 Tham chiếu thay thế (không có trong danh mục)

W77E812A40FL

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 44-pin LQFP (PQFP-44)
same 44-LQFP footprint and 40 MHz core family, but on-chip Flash is far smaller than the W77E532A40FL's 128 KB (order-of-magnitude reduction in code space), limiting firmware to small control routines

📋 Tham chiếu thay thế (không có trong danh mục)

W77E436A40FL

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 44-pin LQFP (PQFP-44)
shares the 44-pin LQFP footprint and 5 V supply, but Flash capacity is roughly one quarter of the W77E532A40FL's 128 KB and the peripheral set differs, so code and pin-function mapping require review

📋 Tham chiếu thay thế (không có trong danh mục)

W77E428A40FL

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 44-pin LQFP (PQFP-44)
same 44-pin QFP footprint and 8051-compatible core, but a substantially smaller Flash budget than 128 KB plus fewer peripherals, making it suitable only for compact control firmware

📋 Tham chiếu thay thế (không có trong danh mục)

W77E532A40FL Tỷ lệ tối đa & tính chất điện

Product Type 8-bit 8051-compatible flash microcontroller
Tần số xung maksimum 40 MHz
Core Architecture 4-cycle 80C51-compatible core
Instruction Set 8051-compatible CISC instruction set
Program Flash Memory 128 KB (128K x 8 bits)
Operating Voltage 5 V
CPU Word Size 8 bits
Hộp 44-pin QFP
Package Family PQFP/BQFP surface-mount family
Lead Count 44 leads
Traditional 8051 Execution Advantage Approximately 1.5x to 3x, depending on instruction type
Kiểu lắp đặt Surface mount
Trạng thái RoHS Compliant
Trạng thái vòng đời Active; current distributor product listings present

Hướng dẫn cấu hình chân W77E532A40FL pqfp/bqfp surface-mount family

Cấu hình chân cho W77E532A40FL (pqfp/bqfp surface-mount family gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân pqfp/bqfp surface-mount family cho W77E532A40FL

Không có dữ liệu chân cụ thể sẵn có cho W77E532A40FL.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

W77E532A40FL phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Appliance Control Platform, Serial Communication Equipment, Data Acquisition and Data Logger, Embedded Communication Module, Security and Access-Control Equipment.

🏭

Industrial Automation Controller

The W77E532A40FL fits compact industrial automation logic where an 8051-compatible instruction set, 128 KB of program flash, EEPROM, and a 40 MHz clock are useful. Its redesigned core executes typical 8051 instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same clock frequency, depending on the instruction. The controller can combine digital input handling, actuator sequencing, operating-state storage, and communication routines in one device. The 128 KB flash region accommodates application code, configuration tables, and protocol handlers, while EEPROM can retain calibration or operating parameters across power cycles. Final deployment requires confirmation of the device operating-temperature range, supply limits, and peripheral assignments in the manufacturer data sheet.

🔧

Appliance Control Platform

The W77E532A40FL is suitable for appliance controllers that need a mature 8-bit code base and more program space than a basic 8051 device. Its 128 KB flash can hold state-machine logic, user-interface routines, motor or heater sequencing, diagnostic tables, and communication firmware. EEPROM provides a separate place for configuration data that should persist through power interruptions. At up to 40 MHz, the four-cycle 80C51-compatible core provides scheduling headroom for multiple periodic tasks. Product engineers should confirm oscillator tolerance, reset behavior, peripheral resources, and output-drive limits before fixing the hardware, especially for mains-connected or safety-relevant appliance functions.

🌐

Serial Communication Equipment

The W77E532A40FL can serve as the embedded controller in serial-interface equipment that benefits from 8051 software continuity. The 40 MHz clock and redesigned core provide room for frame handling, command parsing, checksums, local storage, and host communication, while the 128 KB flash provides room for multiple protocol revisions or field-upgrade routines. EEPROM may retain serial addresses, configuration flags, and counters. Before selecting the device, verify the exact UART and other serial-interface features, pin multiplexing, baud-rate support, and interrupt structure in the W77E532/W77E532A data sheet. Firmware should also validate complete frames and enforce timeouts rather than relying on fixed blocking delays.

🖥️

Data Acquisition and Data Logger

The W77E532A40FL can act as the supervisory processor in a small data-acquisition system that combines sampled inputs, local decision logic, and removable or nonvolatile storage. Its 128 KB flash is suitable for control firmware, lookup tables, event descriptions, and communication software, while EEPROM can preserve configuration and counters. The 40 MHz operating rate leaves scheduling capacity for acquisition control, filtering, timestamping, status reporting, and fault logging. Because the product is an embedded MCU rather than a dedicated analog front end, sensor excitation, signal conditioning, protection, and the required resolution must be implemented separately. Verify the exact timer, serial-interface, and interrupt resources before assigning acquisition channels.

📡

Embedded Communication Module

For a communication module requiring a deterministic embedded-control core, the W77E532A40FL combines 40 MHz operation with 128 KB of flash and EEPROM. Firmware can implement device discovery, command parsing, link management, diagnostics, and persistent configuration while retaining compatibility with an established 8051 development workflow. The redesigned core offers approximately 1.5-to-3-times higher execution performance for typical instructions than a traditional 8051 at the same crystal frequency, helping support protocol processing alongside background control functions. Select the final external interface components and line drivers separately, and verify oscillator accuracy, available serial channels, supply sequencing, and package-level I/O assignments from the manufacturer documentation.

🧩

Security and Access-Control Equipment

The W77E532A40FL is appropriate for access-control and security-support products where event logic, keypad or reader handling, communication, and persistent configuration must share one controller. The 128 KB flash can hold the main state machine, event tables, diagnostics, and communication handlers, while EEPROM can retain device identity or setup values. Its 40 MHz four-cycle core provides additional responsiveness for scanning, debouncing, and background communication. Security functions must nevertheless be implemented and reviewed at the system level, including access-control rules, credential handling, tamper response, debug-port policy, and update authorization. Confirm operating-temperature, reliability, and peripheral requirements before using the device in a safety-critical installation.

What is the Nuvoton W77E532A40FL?
The Nuvoton Technology Corporation W77E532A40FL is an 8-bit, 40 MHz 8051-compatible microcontroller with 128 KB of flash memory, EEPROM, and a 44-pin QFP package. According to the W77E532/W77E532A manufacturer data sheet, its redesigned core avoids wasted clock and memory cycles and executes typical 8051 instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same clock frequency, depending on the instruction.
What are the key specifications of W77E532A40FL that engineers should know?
The W77E532A40FL is a 40 MHz, 8-bit CMOS microcontroller with 128 KB of flash, EEPROM, a redesigned 4-cycle 80C51-compatible core, and a 44-pin QFP package. According to the W77E532/W77E532A manufacturer data sheet, typical instruction execution can be approximately 1.5 to 3 times faster than a traditional 8051 at the same clock frequency. Its principal engineering significance is 8051 software continuity combined with substantially greater clock and program-memory capacity.
Where can I download the W77E532A40FL datasheet PDF?
The W77E532A40FL datasheet PDF is available through the verified W77E532/W77E532A document link on this page. The document contains the authoritative pin description, memory organization, electrical characteristics, clock requirements, peripheral functions, and package information. Use that document when assigning PCB nets and writing device initialization code, because generic 8051 documentation does not establish whether every peripheral, interrupt vector, and memory behavior matches the selected Nuvoton implementation.
Where is the W77E532A40FL pinout located?
The W77E532A40FL pinout is located in the pin-description and package-drawing sections of the W77E532/W77E532A manufacturer data sheet. The confirmed package is a 44-pin QFP, also described in listings as PQFP44 or 44-BQFP. Before laying out a board, assign every physical lead directly from the data sheet and verify pin 1 orientation, oscillator pins, reset behavior, programming interfaces, supply pins, and all I/O functions rather than inferring them from a standard 8051 pinout.
How much flash memory does the W77E532A40FL contain?
The W77E532A40FL contains 128 KB of embedded flash memory, organized as 128K by 8 bits. The verified distributor description identifies it as an 8051 W77 microcontroller with 128 KB flash. This capacity supports larger application firmware, communication handlers, configuration tables, and boot logic than basic 8051 controllers, while EEPROM provides a separate mechanism for values that must persist across power cycles. The exact flash endurance, programming cycle time, and write-protection arrangement should be confirmed in the manufacturer data sheet.
Is the W77E532A40FL suitable for industrial control applications?
The W77E532A40FL is suitable for many industrial-control functions requiring an 8-bit embedded controller, 128 KB of flash, EEPROM, and a 40 MHz clock. Its 4-cycle 80C51-compatible core provides useful execution headroom for control loops, communication protocols, status logging, and supervisory logic. Suitability for a particular industrial product still depends on the confirmed operating-temperature range, electrical limits, isolation requirements, environmental qualification, and peripheral compatibility specified in the manufacturer documentation.
What can replace the W77E532A40FL?
No confirmed pin-to-pin drop-in replacement for the W77E532A40FL was identified in the cross-reference results. The similar MC9S08GT32ACFBER is a cross-reference comparison candidate, but its package and detailed electrical compatibility must be verified before it can be called a replacement. A valid MCU substitution requires more than a matching clock speed: the pin arrangement, supply voltage, reset and oscillator scheme, memory model, peripheral functions, interrupt behavior, and firmware assumptions must all match.
What is the best Nuvoton equivalent for W77E532A40FL?
No confirmed Nuvoton drop-in equivalent for the W77E532A40FL was identified. The W77E532A40FL-TR listing represents the same device with a reel-oriented ordering suffix, rather than a distinct drop-in alternative with different engineering characteristics. The safest replacement strategy is to retain the W77E532A40FL footprint and firmware baseline, then evaluate any alternative only after its 44-pin assignment, 40 MHz operation, 128 KB flash, EEPROM, reset behavior, and peripheral functions have been independently verified.
W77E532A40FL vs MC9S08GT32ACFBER - which is better for an 8051 design?
Choose the W77E532A40FL when maintaining the 8051-compatible software model and its confirmed 128 KB flash, EEPROM, 40 MHz operation, and 44-pin QFP package is important. The MC9S08GT32ACFBER is a different 8-bit MCU architecture, so it should not replace the Nuvoton device without a complete board, memory, peripheral, and firmware review. The W77E532A40FL is the lower-disruption choice for an existing 8051-based design.
What is the difference between W77E532A40FL and W77E532A40FL-TR?
The W77E532A40FL and W77E532A40FL-TR identify the same Nuvoton W77E532A40FL microcontroller configuration, with the additional suffix associated with tape-and-reel ordering in the listed product entry. Their core characteristics remain 8-bit operation, 40 MHz maximum clock, 128 KB flash, EEPROM, and a 44-pin QFP package. The suffix should not be interpreted as a different functional MCU; verify the physical packing method and assembly requirements against the current manufacturer ordering information.
When should I choose W77E532A40FL over another 8-bit MCU?
Choose the W77E532A40FL when an existing 8051 codebase, 128 KB flash requirement, EEPROM, and a 40 MHz 4-cycle core provide a strong fit for the product architecture. Its redesigned execution core can process typical 8051 instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same clock frequency. Select a different MCU when a broader peripheral set, different memory architecture, lower power target, or more advanced ecosystem is more important than preserving the 8051 design.
Is the W77E532A40FL the same as MC9S08GT32ACFBER?
No, the W77E532A40FL and MC9S08GT32ACFBER are not established as the same MCU or as drop-in equivalents. The Nuvoton device is confirmed as an 8-bit, 40 MHz, 8051-compatible controller with 128 KB flash and a 44-pin QFP package. The MC9S08GT32ACFBER appears only as a comparison candidate, with no verified pin-level compatibility in the available results. Firmware, board changes, and peripheral validation would therefore be necessary before considering it.
Where can I buy W77E532A40FL online?
Use the Request a Quote form on this page to request current W77E532A40FL availability, commercial terms, and lead time from XAIPART. The part is an 8-bit, 40 MHz, 128 KB-flash 8051-compatible microcontroller in a 44-pin QFP package. A current quote should also confirm the desired reel or tray packing option, production quantity, delivery destination, and any date-code or traceability requirements needed by your purchasing process.
What is the price of W77E532A40FL?
Request a current W77E532A40FL quotation through the Request a Quote form on this page. The structured commercial listing does not contain a qualifying exact-MPN quantity-break price table, so no static price should be used for budgeting or comparison. Your quote should specify quantity, packing method, target delivery date, ship-to country, and tax or freight requirements so the commercial response reflects the actual procurement request.
What is the lead time and stock status for W77E532A40FL?
Current stock and lead time for W77E532A40FL should be requested through the Request a Quote form on this page. One listed channel shows stock of 2,496 pieces with the delivery period marked for confirmation, which demonstrates commercial inventory activity but does not guarantee allocation for a new order. Include your required quantity and production schedule in the request. The confirmed device details are 8-bit architecture, 40 MHz operation, 128 KB flash, EEPROM, and a 44-pin QFP package.
How does the redesigned W77E532A core affect firmware timing?
The redesigned W77E532A core executes typical 8051 instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal frequency, according to the manufacturer data sheet. This improvement depends on instruction type, so timing-critical loops should be evaluated with the actual instruction sequence and compiler output. Peripheral timing, interrupt latency, and code generated for 8051-compatible development tools remain the correct basis for final firmware validation.

Dữ liệu tham khảo kỹ thuật cho W77E532A40FL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the W77E532A40FL when an established 8051 firmware architecture must be retained while gaining a 40 MHz clock, 128 KB of flash, EEPROM, and a redesigned core that executes typical instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same frequency. It is especially suitable for compact industrial controllers, appliances, serial equipment, and data-logging products where code size and familiar development practices matter. The MC9S08GT32ACFBER should be considered only for a new design after comparing its memory map, peripherals, toolchain, electrical limits, and board requirements; it is not a confirmed drop-in replacement. W77E532A40FL-TR represents the same core configuration with a reel-oriented ordering suffix. For either configuration, verify the package dimensions, operating-temperature grade, supply limits, oscillator circuit, and peripheral map against the manufacturer documentation before releasing the PCB or production firmware.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này W77E532A40FL-TR MC9S08GT32ACFBER
Brand Nuvoton Technology Corporation Nuvoton Technology Corporation Freescale Semiconductor
CPU Architecture 8-bit 8051-compatible 8-bit 8051-compatible 8-bit HCS08

Bảo phân biệt quan trọng

  • Higher clock rate than a traditional 8051 implementation (vsMC9S08GT32ACFBER)
  • Substantial embedded code capacity (vsMC9S08GT32ACFBER)
  • Direct 8051 software-model continuity (vsMC9S08GT32ACFBER)

Ghi chú thiết kế

Design the 44-pin QFP footprint from the manufacturer package drawing rather than from a generic QFP library. Verify lead pitch, pin-1 orientation, courtyard clearance, solder-mask definition, paste apertures, and whether any exposed thermal feature is required. The available product description confirms a 44-pin QFP but does not establish every dimensional tolerance, so an unverified footprint should not be released to fabrication. Use the W77E532/W77E532A package drawing as the controlling mechanical reference.

Do not treat every 8-bit MCU with a 40 MHz clock as a functional substitute for the W77E532A40FL. The 8051-compatible instruction behavior, memory map, reset sequence, interrupt layout, oscillator requirements, peripheral resources, and I/O multiplexing must be checked before replacement is approved. The MC9S08GT32ACFBER is an architecture comparison candidate, not a confirmed drop-in part. A cross-brand substitution should enter production only after schematic, timing, firmware, and board-level validation are complete.

Confirm the exact supply-voltage range, absolute maximum ratings, input thresholds, output-drive capability, and power-consumption figures from the W77E532/W77E532A data sheet before fixing external circuitry. The product is identified as a 5 V device, but that description alone does not define permissible supply tolerance or every I/O voltage domain. Decouple each supply pin according to the manufacturer guidance and validate the regulator’s startup, load transients, and noise margin with the final clock and peripheral configuration.

Firmware timing should be based on the selected core and actual instruction sequence. The manufacturer reports that typical W77E532A instructions execute approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal frequency, but the factor depends on instruction type. Recalculate timeout loops, sampling intervals, serial timing, and interrupt-latency assumptions with the compiled output. Peripheral timing must follow device documentation rather than a generic 8051 reference.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS compliance is stated in the product comparison listing. No confirmed AEC-Q100 qualification, REACH declaration, halogen-free designation, or conflict-minerals statement was identified.

Dữ liệu được xác minh vào: 2026-11-11 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

W77E532A40FL datasheet W77E532A40FL pinout W77E532A40FL datasheet pdf W77E532A40FL equivalent W77E532A40FL replacement W77E532A40FL cross reference W77E532A40FL price W77E532A40FL stock Nuvoton W77E532A40FL W77E532A40FL 40MHz 128KB flash W77E532A40FL 44-pin QFP W77E532A40FL vs MC9S08GT32ACFBER W77E532A40FL industrial controller W77E532A40FL application circuit

Các bộ phận và thuật ngữ liên quan

Nuvoton Technology Corporation W77E532A40FL W77E532A40FL-TR MC9S08GT32ACFBER 8051-compatible microcontroller 8-bit microcontroller CISC microcontroller embedded controller four-cycle 80C51 core 40 MHz clock 128 KB flash memory EEPROM 44-pin QFP PQFP44 surface-mount package serial-interface equipment industrial automation appliance control data acquisition embedded communication access control RoHS Winbond Electronics
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ