Zilog

Z86E6316FSC - 8-Bit 16MHz 32KB OTP MCU | Zilog

MPN: Z86E6316FSC ✗ Cuối đời
44-pin QFP Package 16 MHz Speed 32 KB OTP Memory
MOQ: 1 |

Z86E6316FSC Tóm tắt

The Zilog Z86E6316FSC is an 8-bit Z8 microcontroller with 32KB of one-time-programmable memory, a 16MHz operating frequency, UART capability, and a 44-pin QFP package. It is intended for embedded control applications requiring compact code storage, serial communications, and deterministic peripheral-driven operation. The device combines a low-cost 8-bit processor architecture with on-chip OTP program memory in a surface-mount package suitable for automated PCB assembly.

An 8-bit microcontroller is a compact embedded-control IC that executes firmware from internal program memory and reads sensor, control, or communication signals through dedicated peripheral pins. In the broader semiconductor hierarchy, the Z86E6316FSC is a microcontroller, which is a type of embedded processor and semiconductor used for system-level control rather than general-purpose computing. Its 32KB OTP architecture makes it appropriate for firmware that must be programmed once and then operate without external program-memory components.

Key characteristics include an 8-bit processing core, 16MHz clock capability, 32KB OTP program memory, integrated UART, and a 44-QFP package. One-time-programmable memory supports permanent configuration or firmware storage, but it also means the application program cannot be updated in the field. The UART interface enables serial links to sensors, human-interface modules, data converters, or other embedded controllers while reducing the number of discrete communication components required on a board.

The 44-QFP package provides a conventional surface-mount footprint with leads on all four sides. Its pin arrangement, electrical limits, peripheral multiplexing, clock options, and programming procedure should be confirmed against the manufacturer datasheet before schematic capture or PCB routing. Because different members of the Z86 family may use different package suffixes, peripheral functions, and temperature grades, suffix-level compatibility must be checked rather than assumed from the Z8 family name.

Typical uses include serial-control terminals, appliance interfaces, industrial control modules, instrument panels, and embedded communication bridges. The 16MHz processing rate supports responsive polling and control loops, while the 32KB OTP region accommodates compact application firmware. UART-centered designs are particularly natural because serial communication is integrated into the controller instead of requiring a separate communications IC.

For new layouts, place decoupling capacitors at the supply pins, preserve the manufacturer's clock and reset guidance, and reserve programming or test access where required. Confirm signal levels, maximum input voltages, peripheral pin assignments, and exposed-pad or thermal requirements in the datasheet before releasing a production layout.

Bộ thay thế dễ dàng lắp đặt cho Z86E6316FSC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với Z86E6316FSC (cùng hình factor và footprint) — khác nhau ở Package, Serial Interface.

Zilog
Package: 44-LQFP, 10 mm x 10 mm
Serial Interface: 1 UART
So sánh với Z86E6316FSC →

Z86E6316ASG

✅ Drop-In ⚠️ Thông số chưa được xác minh
Zilog
📦 44-pin QFP
8-bit Z8 CISC microcontroller · 16 MHz · 32 KB OTP (32K x 8 bytes) · One-time programmable (OTP) · 5 V · 1 UART · 44-LQFP, 10 mm x 10 mm · 44 leads

Liên hệ để biết giá

Xem tài liệu →

Z86E6316FSC Tỷ lệ tối đa & tính chất điện

Product Type 8-bit microcontroller
Manufacturer Zilog
Processor Architecture Z8 8-bit
Tần số xung maksimum 16 MHz
Program Memory 32 KB OTP
Program Memory Organization 32K x 8 bits
Serial Interface UART
Hộp 44-pin QFP
Kiểu lắp đặt Surface mount
Bề rộng đường dữ liệu 8 bit
Trạng thái RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Hướng dẫn cấu hình chân Z86E6316FSC 44-pin qfp

Cấu hình chân cho Z86E6316FSC (44-pin qfp gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 44-pin qfp cho Z86E6316FSC

Không có dữ liệu chân cụ thể sẵn có cho Z86E6316FSC.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

Z86E6316FSC phù hợp cho 6 Áp dụngs: Serial Control Terminal, Appliance Control Module, Industrial Sensor Interface, Instrument Front Panel, Communication Bridge, Compact Data Converter Control.

🔧

Serial Control Terminal

The Z86E6316FSC fits a dedicated serial terminal because its 16MHz Z8 core can service control logic while the integrated UART communicates with a host, display, or data-acquisition module. The 32KB OTP region can hold the terminal firmware, protocol handlers, and fixed configuration without requiring an external memory device. Place the MCU between the system connector and downstream circuitry, and confirm UART pin multiplexing and logic levels in the manufacturer datasheet. Because the program memory is one-time programmable, production firmware must be finalized before programming. The main design trade-off is lower field flexibility than flash memory in exchange for a compact, deterministic control solution.

🏭

Appliance Control Module

The Z86E6316FSC is appropriate for appliance control modules that combine local decision logic with serial communication to a main controller or accessory. Its 16MHz operating rate supports responsive input polling and state-machine execution, while 32KB of OTP stores compact firmware for motors, relays, indicators, and safety interlocks. The 44-QFP package is practical for automated assembly when the board does not require an extremely small footprint. Validate supply voltage, I/O limits, watchdog behavior, and peripheral assignments against the manufacturer datasheet. OTP is suitable when each appliance configuration is fixed during manufacturing, but it is not appropriate when end users must update control policies in the field.

🧩

Industrial Sensor Interface

The Z86E6316FSC can act as the controller for a compact industrial sensor interface that receives commands and reports measurements through a UART link. Its 8-bit architecture and 16MHz clock are well matched to supervisory tasks such as sensor selection, scaling, status tracking, and fault signaling. Thirty-two kilobytes of OTP provides room for a complete protocol handler and fixed calibration data. The design should include suitable power filtering and protection for external serial lines, with logic levels and connector electrical limits established from the device documentation. If the end user must change calibration or firmware repeatedly, select a flash-based controller with a larger memory and update mechanism.

📺

Instrument Front Panel

The Z86E6316FSC supports an instrument front-panel controller by handling button states, indicator commands, and serial exchanges with a display or measurement engine. A 16MHz clock permits responsive human-interface response, and the 32KB OTP area can hold menus, status logic, and communication routines without external program storage. The 44-QFP footprint gives PCB designers access to four-sided lead access and conventional inspection. Carefully allocate pins after checking all alternate functions, since multiplexed peripherals can change the available I/O map. The fixed-memory architecture works well for a product whose interface behavior is determined at manufacture; it is less suitable for products requiring downloadable menus or field-configurable operating profiles.

🌐

Communication Bridge

⚡

Compact Data Converter Control

The Z86E6316FSC fits compact converter and data-acquisition modules where a local MCU must configure a peripheral, supervise operating status, and relay results through a serial interface. Its 32KB OTP program area can hold fixed command tables and control firmware, while the 8-bit architecture keeps the control path simple and efficient. At 16MHz, the processor can handle interrupts and routine status checks without occupying a more capable core. The design must respect the MCU supply range, I/O current limits, clock requirements, and package pin assignments from the manufacturer datasheet. OTP is advantageous for stable production configurations but should be avoided where calibration coefficients or firmware must be revised repeatedly in the field.

What is the Z86E6316FSC?
The Z86E6316FSC is a Zilog Z8 8-bit microcontroller operating at up to 16MHz, with 32KB of one-time-programmable program memory, UART capability, and a 44-pin QFP package. According to the manufacturer datasheet, it is intended for embedded-control and serial-communication designs. Its OTP memory allows firmware or permanent configuration data to be programmed into the device before it enters the finished product.
How much program memory does the Z86E6316FSC have?
The Z86E6316FSC provides 32KB, or 32K x 8 bits, of one-time-programmable program memory. The manufacturer datasheet identifies the device as a 32KB OTP microcontroller. Because OTP memory cannot be rewritten after programming, engineers should use the device only where the final firmware and configuration are known before deployment. A flash-memory alternative may be preferable if field updates are required.
What clock frequency does the Z86E6316FSC use?
The Z86E6316FSC supports operation at up to 16MHz, as stated in the manufacturer datasheet and product listing. The maximum clock frequency enables the 8-bit processor to service peripheral events, control logic, and UART traffic at practical rates. The permitted clock source, oscillator configuration, and timing limits must be implemented exactly as specified in the datasheet because incorrect startup or clock settings can prevent operation.
What package does the Z86E6316FSC use?
The Z86E6316FSC is supplied in a 44-pin QFP surface-mount package. The manufacturer datasheet is the controlling document for the complete pin arrangement and pin functions. Before assigning signals or creating a PCB footprint, use its pin-description table and package drawing to verify power pins, ground pins, I/O assignments, programming signals, and any exposed thermal-pad requirements.
Where can I download the Z86E6316FSC datasheet PDF?
The Z86E6316FSC datasheet PDF is available from the Zilog product documentation and through the linked technical document listing for this device. Start with the manufacturer datasheet because it defines the authoritative electrical limits, pin functions, memory map, UART behavior, programming procedure, and package dimensions. The linked PDF should be checked against the exact Z86E6316FSC suffix before it is used to approve a production schematic.
Where can I find the Z86E6316FSC pinout?
The Z86E6316FSC pinout is documented in the pin-description table and package drawing within the manufacturer datasheet. The device uses a 44-pin QFP package, so engineers should assign PCB tracks from that exact diagram rather than from a generic Z8 footprint. Verify pin numbering, ground distribution, supply connections, programming access, and alternate peripheral functions before routing the board.
Can the Z86E6316FSC be used with UART peripherals?
Yes, the Z86E6316FSC includes UART capability for serial communication with compatible peripherals. The manufacturer datasheet identifies the device as an 8-bit MCU with UART, making it suitable for sensor modules, displays, data converters, and other serial-controlled equipment. The electrical interface still requires confirmation of logic levels, baud-rate support, pin multiplexing, and peripheral-specific timing.
Is the Z86E6316FSC suitable for battery-powered equipment?
The Z86E6316FSC may be suitable for low-power embedded equipment, but its operating current and shutdown behavior must be checked in the manufacturer datasheet before making a battery-life claim. Its 16MHz maximum clock rate can support responsive control and UART handling, while the 32KB OTP architecture eliminates external program-memory demand. Compare active and idle current against the load and required wake-up behavior.
What is the difference between OTP and Flash memory for the Z86E6316FSC?
The Z86E6316FSC uses one-time-programmable memory, meaning its program and configuration content is permanently written after programming. Flash-based microcontrollers normally permit subsequent erase-and-rewrite cycles. If a product requires field-updatable firmware, data logging parameters, or configuration changes after deployment, choose a flash-memory controller instead unless the application can be finalized before programming.
What can replace the Z86E6316FSC?
A true drop-in replacement must match the 44-pin QFP footprint, pin functions, clock architecture, 32KB memory topology, UART behavior, supply requirements, and programming workflow. The available cross-reference results do not identify a manufacturer-confirmed, pin-to-pin substitute for the Z86E6316FSC. A suffix variant may be similar, but its exact pinout and electrical compatibility must be verified in the manufacturer datasheet before it is treated as a drop-in replacement.
Is the Z86E6316FSC the same as the Z86E6316PSC?
The Z86E6316FSC and Z86E6316PSC are not confirmed as identical drop-in parts because the package suffix and pin count differ in the available listings. The FSC is identified as a 44-QFP device, while the PSC listing does not establish the same physical footprint. They may share an internal processor or peripheral family, but PCB compatibility requires matching package drawings and pin-by-pin verification.
When should I choose the Z86E6316FSC over a flash-memory microcontroller?
Choose the Z86E6316FSC when the final 8-bit firmware fits within 32KB, permanent OTP programming is acceptable, and a 16MHz Z8-compatible control architecture is sufficient. Its integrated UART and dedicated package can simplify a dedicated serial-control product. Choose a flash-memory controller instead when firmware updates, long-term configuration changes, larger application code, or more advanced peripherals are required.
Where can I buy the Z86E6316FSC and check its current price?
Use the Request a Quote form on this page to request current availability, commercial terms, and lead time for the Z86E6316FSC. The device is a catalog MCU with a 44-pin QFP package, 32KB OTP memory, and a 16MHz maximum operating frequency. The quote request should state the required quantity, packaging preference, and destination so the production schedule can be confirmed.
Is the Z86E6316FSC in stock and what is its lead time?
Current stock and production lead time should be confirmed through the Request a Quote form on this page. Search listings indicate that the Z86E6316FSC is distributed, but availability can vary by quantity, package shipment, and replenishment status. Provide the required order quantity and delivery location when requesting a quotation so the current schedule and available packing options can be reviewed.
What is the price of the Z86E6316FSC?
Use the Request a Quote form on this page for a current Z86E6316FSC quotation. The commercial response should reflect the requested quantity, delivery location, and packaging requirement. This page intentionally avoids a static price because quotation terms and component availability can change, while the core device identity remains the Zilog 16MHz, 32KB OTP, 44-QFP microcontroller.
What are the key specifications of the Z86E6316FSC that engineers should know?
The key Z86E6316FSC specifications are its 8-bit Z8 architecture, 16MHz maximum clock frequency, 32KB OTP program memory, integrated UART, and 44-pin QFP package. These features position it as a compact embedded controller for serial-control, appliance, instrument, and industrial interface products. Supply voltage, I/O count, timer configuration, and detailed electrical limits should be selected directly from the manufacturer datasheet.
Is the Z86E6316FSC RoHS compliant and automotive qualified?
The RoHS and REACH status of the Z86E6316FSC must be confirmed from the current manufacturer environmental or material declaration, so this page does not assume compliance. The Z86E6316FSC is also not identified as an AEC-Q100 automotive-qualified part in the available product information. Automotive programs should request the exact suffix documentation before approving the device for vehicle electronics.

Dữ liệu tham khảo kỹ thuật cho Z86E6316FSC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the Z86E6316FSC when a product needs an 8-bit embedded controller with a 16MHz operating rate, 32KB of permanent program memory, UART communication, and a 44-QFP footprint. It is particularly effective for appliance controllers, serial terminals, instrument interfaces, and compact communication modules whose firmware is finalized before manufacturing. The OTP architecture is the main functional trade-off: it suits fixed production products but not applications requiring field-updatable firmware or end-user configuration. The related Z86E6316ASG is the closest identified alternative, but engineers should compare its exact suffix-specific pinout, electrical limits, clock details, UART features, and programming procedure before treating it as a drop-in replacement. For designs requiring substantially more code, multiple communication interfaces, or repeated firmware revisions, choose a flash-memory MCU instead.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này Z86E6316ASG
Brand Zilog Zilog
Package 44-pin QFP 44-pin QFP
Processor Architecture 8-bit Z8 8-bit Z8 family
Program Memory 32 KB OTP 32 KB OTP family configuration
Serial Interface UART UART family configuration
Mounting Type Surface mount Surface mount

Bảo phân biệt quan trọng

  • Integrated serial communications (vsZ86E6316ASG)
  • One-time-programmable memory supports permanent product configuration (vsZ86E6316ASG)
  • Compact leaded QFP assembly (vsZ86E6316ASG)

Ghi chú thiết kế

Assign the PCB footprint directly from the Z86E6316FSC manufacturer package drawing and verify every pin against the datasheet pin table. The 44-QFP lead arrangement must match the exact suffix, including power, ground, programming, UART, and alternate-function assignments. Keep the ground layout continuous and place required decoupling capacitors close to their associated supply pins. Do not reuse a generic Z8 44-QFP footprint without a mechanical and pin-level comparison.

Confirm the supported supply range, absolute maximum voltage, and operating current from the manufacturer datasheet before connecting external signals. The 16MHz operating rate does not by itself define power consumption, so calculate the design requirement from the selected clock configuration and peripheral activity. Add supply filtering appropriate to the board environment and confirm that any external serial interface cannot inject voltages above the device's specified input limits.

One-time-programmable memory cannot be corrected by an ordinary firmware update. Establish the complete image, configuration data, checksum, and programming procedure before production. A programming failure may permanently damage the usable memory, so validate the programmer, programming voltage, timing, and board test fixture on representative devices. If the product requires field updates, select a flash-memory microcontroller instead of relying on an OTP migration path.

Treat the UART route as a potential noise source even though it is not a high-speed differential interface. Keep it away from switching-power nodes and sensitive analog inputs, provide a continuous ground reference, and follow the manufacturer's external-component recommendations. If the oscillator is used, reserve the required crystal or resonator and loading network according to the reference schematic. Review unused pins for required termination rather than assuming they can be left unconnected.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The available product listings do not provide a verified current environmental-compliance declaration for this exact suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Zilog before production release.

Dữ liệu được xác minh vào: 2026-11-17 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

Z86E6316FSC datasheet Z86E6316FSC pinout Z86E6316FSC datasheet pdf Z86E6316FSC equivalent Z86E6316FSC replacement Z86E6316FSC price Z86E6316FSC stock Zilog Z86E6316FSC Z86E6316 8-bit microcontroller Z86E6316 16MHz UART MCU Z86E6316 44-QFP pinout Z86E6316FSC vs Z86E6316ASG

Các bộ phận và thuật ngữ liên quan

Zilog Z86E6316FSC Z86E6316ASG Z86E8316PEG Z8 8-bit microcontroller 8-bit microcontroller embedded processor semiconductor one-time-programmable memory OTP flash memory UART 16 MHz clock 32 KB program memory 44-pin QFP surface mount serial communication appliance control industrial sensor interface instrument panel communication bridge Z86 family Z8 architecture
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ