XC4VLX15-10FFG676I - 13,824-Cell 90 nm FPGA | Xilinx
MPN: XC4VLX15-10FFG676I ✗ Cuối đờiXC4VLX15-10FFG676I Tóm tắt
The Virtex-4 LX architecture combines programmable logic, block RAM, dedicated DSP arithmetic, and programmable I/O in a single monolithic device. This combination makes the XC4VLX15 suitable for parallel signal processing, embedded control, industrial protocol bridging, and high-speed data acquisition. Its 320 I/O provide substantial connectivity for parallel buses, memory interfaces, clock distribution, and multi-channel control logic.
Key engineering characteristics include the 90 nm process node, 1.2 V core voltage, 13,824 logic cells, and 320 user I/O. The device uses a 676-BBGA FCBGA package and supports the -10 speed grade. The Xilinx Virtex-4 product family uses configurable logic blocks and selectable I/O standards, allowing a design to combine multiple interface types while retaining deterministic timing within each supported I/O standard.
Typical uses include industrial machine vision, test-and-measurement acquisition systems, telecom signal conditioning, embedded DSP pipelines, and communications equipment. Its 320 I/O make it particularly suitable for parallel ADC and DAC interfaces, where many data, clock, and control signals must terminate in one device. The FPGA can also implement protocol converters, timing controllers, and real-time data filters.
PCB implementation requires careful treatment of the 676-ball BGA footprint. Signal-integrity and power-delivery design should follow the manufacturer's package pinout files, including prescribed ball assignments for configuration pins, dedicated pins, and supply connections. Use the AMD Virtex-4 package device pinout files when assigning tracks and verifying every ball location.
Because this is a legacy programmable-logic device, engineers should confirm toolchain support, bitstream compatibility, I/O voltage requirements, and end-of-life purchasing status before starting a new design. Existing industrial and telecommunications platforms can retain a stable upgrade path by using the same XC4VLX15 device family and package variants rather than redesigning the board.
Bộ thay thế dễ dàng lắp đặt cho XC4VLX15-10FFG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC4VLX15-10FFG676I (cùng hình factor và footprint) — khác nhau ở Device Type, Package, Package Type, Speed Grade, Process Technology.
XC4VLX15-10FFG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VLX15-12FFG676C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC4VLX15-12FF676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC4VLX15-10FFG676E
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC4VLX15-12FFG676E
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC4VLX15-10FFG676I Tỷ lệ tối đa & tính chất điện
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Cells | 13,824 cells |
| User I/O | 320 I/O |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -10 |
| Temperature Grade | Industrial |
| Package Type | 676-BBGA FCBGA |
| Package Pin Count | 676 balls |
| Architecture | ASMBL Virtex-4 architecture |
| Kiểu lắp đặt | Surface mount |
| Lead-Free Status | Lead free |
| Trạng thái RoHS | RoHS compliant |
Hướng dẫn cấu hình chân XC4VLX15-10FFG676I 676 balls
Cấu hình chân cho XC4VLX15-10FFG676I (676 balls gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC4VLX15-10FFG676I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC4VLX15-10FFG676I phù hợp cho 6 Áp dụngs: Parallel Data Acquisition, Industrial Machine Vision, Communications Protocol Conversion, Real-Time DSP Filtering, Test and Measurement Instrumentation, Embedded System Control.
Parallel Data Acquisition
The XC4VLX15-10FFG676I fits parallel ADC and DAC boards that need many simultaneous sampling and control paths. Its 320 user I/O can connect wide data buses, clocks, triggers, and status signals without requiring multiple interface devices, while the 13,824 logic cells provide capacity for sample sequencing, digital correction, and buffering. The 90 nm Virtex-4 LX implementation is appropriate for a legacy industrial instrument. Keep each interface within its supported I/O standard, route clocks with matched skew, and use the official package pinout files before assigning the 676-ball footprint. Because the device is an industrial-grade -10 part, its thermal and timing behavior must be checked against the enclosure temperature and the original timing constraints.
Được đề xuất
Industrial Machine Vision
Machine-vision controllers benefit from the XC4VLX15-10FFG676I's combination of 320 I/O and programmable logic resources. Parallel camera interfaces, encoders, exposure controls, trigger distribution, and actuator outputs can be implemented in one device, while on-chip logic can perform pixel formatting or timing checks. The industrial temperature designation supports controlled factory environments where the commercial-grade alternatives may be marginal. Implement camera data paths with source-synchronous interfaces only where the selected I/O standard and board topology support them, and place decoupling close to each supply ball. Validate the complete 676-BBGA assembly process because thermal management and solder-joint reliability become important as accelerator, memory, and communications devices cluster around the FPGA.
Được đề xuất
Communications Protocol Conversion
The XC4VLX15-10FFG676I can serve as a protocol-conversion and packet-processing element in legacy communication equipment. Its 320 user I/O support multiple parallel channels, while the Virtex-4 LX logic fabric can implement framing, rate adaptation, buffering, and clock-domain isolation. The -10 speed grade provides a defined timing target for designs already qualified around the original ordering code. Use the manufacturer's supported I/O standards for each external interface and design clock-domain crossings with appropriate constraints. A higher-speed -12 variant may add timing margin, but it should not replace the -10 device without repeating static timing, power, and thermal verification. The industrial grade is preferable when the converter is installed in a plant cabinet or network enclosure.
Được đề xuất
Real-Time DSP Filtering
The XC4VLX15-10FFG676I is appropriate for small real-time FIR, IIR, decimator, and adaptive-filter pipelines where fixed-function DSP would be inflexible. The FPGA fabric supports parallel arithmetic, local block memory, and deterministic latency, while the 1.2 V core architecture is characteristic of the 90 nm Virtex-4 generation. Designers should use synthesis and implementation reports to confirm multiplier, block-RAM, and timing utilization rather than estimating resources from the logic-cell count alone. Constrain all clocks, keep DSP and RAM interfaces close to the relevant logic, and reserve switching activity for predictable timing closure. For a running industrial platform, retaining the -10 grade avoids changing timing margins or power behavior that were validated in the original design.
Được đề xuất
Test and Measurement Instrumentation
The XC4VLX15-10FFG676I can coordinate counters, pattern generation, capture logic, and timing control in a programmable measurement instrument. With 320 user I/O, it can support parallel DUT stimulation and response capture, while its configurable logic permits reusable channel counts and programmable test sequences. For laboratory instruments that require stable industrial-temperature operation, the I-grade ordering option retains that qualification class. Keep high-fanout clock and control traces short, use controlled-impedance routing for external interfaces, and isolate analog sections from digital switching activity. Existing Virtex-4 designs can reuse their configuration concepts and package layout, but any alternative must preserve the exact 676-ball footprint, supply requirements, and speed grade.
Được đề xuất
Embedded System Control
The XC4VLX15-10FFG676I can act as a central control fabric for legacy embedded equipment with extensive peripheral connectivity. Its 320 I/O can connect memories, actuators, sensors, and inter-module interfaces, while internal logic can implement state machines, health monitoring, and fault handling. The device is particularly relevant where an industrial control platform must be maintained without changing its 676-BBGA board layout. Implement dedicated configuration, reset, and clock resources according to the manufacturer package files, and maintain independent supplies for core and I/O requirements defined by the device documentation. A commercial-temperature replacement is acceptable only if the enclosure's worst-case ambient and conducted heat remain within its rating, while a higher speed grade requires fresh timing and power analysis.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC4VLX15-10FFG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC4VLX15-10FFG676C | XC4VLX15-12FFG676C | XC4VLX15-12FF676C | XC4VLX15-10FFG676E | XC4VLX15-12FFG676E |
|---|---|---|---|---|---|---|
| Package | 676-BBGA FCBGA | 676-BBGA FCBGA - same | 676-BBGA FCBGA - same | 676-BBGA FCBGA - same | 676-BBGA FCBGA - same | 676-BBGA FCBGA - same |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells |
| User I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O |
| Speed Grade | -10 | -10 - same | -12 - higher performance grade | -12 - higher performance grade | -10 - same | -12 - higher performance grade |
| Temperature Grade | Industrial | Commercial | Commercial | Commercial | E temperature designation | E temperature designation |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Bảo phân biệt quan trọng
- Retains the industrial temperature designation for controlled industrial deployments (vsXC4VLX15-10FFG676C)
- Matches the original -10 performance class instead of changing timing behavior (vsXC4VLX15-12FFG676C)
- Provides a direct same-footprint path for industrial-grade service sourcing (vsXC4VLX15-12FF676C)
Ghi chú thiết kế
Use the AMD Virtex-4 package device pinout files to verify every one of the 676 ball locations before routing. Preserve the package-specific power, ground, configuration, and dedicated-pin assignments rather than relying on a generic BGA symbol. Place all required decoupling capacitors at their prescribed package pins, keep the supply and ground planes continuous beneath the device, and follow the package drawing for via-in-pad or via-under-bump options.
Virtex-4 performance depends heavily on predictable clock distribution and registered I/O paths. Route clock networks on dedicated layers with symmetrical topology, avoid stubs on sensitive nets, and apply the vendor's clocking guidance. For external data interfaces, use controlled-impedance routing, maintain return paths beneath high-speed traces, and place series termination or other interface-specific components where the chosen I/O standard requires them.
The 90 nm Virtex-4 device can dissipate meaningful power in high-utilization designs even though its core voltage is only 1.2 V. Route heat through the package substrate into the PCB and use the device-specific thermal model to estimate junction temperature. Avoid placing the FPGA beside heat sources without a thermal path, and evaluate the enclosure with the maximum expected logic activity rather than an idle configuration.
Do not treat two XC4VLX15 devices with the same ball count as interchangeable without checking every suffix. The -10 and -12 portions select speed grade, while C, E, and I identify temperature classes; the FF versus FFG package codes also carry different assembly information. A higher speed grade changes timing and power characteristics, and a commercial-grade device may not satisfy an industrial ambient requirement even when its electrical pins match.
Thông tin tuân thủ
RoHS-compliant and lead-free status are associated with the XC4VLX15-10FFG676C ordering information for this device family. No vehicle-specific AEC-Q100 qualification is indicated for this catalog FPGA.