Xilinx

XC4VLX15-10FFG676I - 13,824-Cell 90 nm FPGA | Xilinx

料号: XC4VLX15-10FFG676I ✗ 停产
1.2 V Vdss 676-BBGA FCBGA Package -10 Speed
最小起订量: 1 |

XC4VLX15-10FFG676I 概述

The Xilinx XC4VLX15-10FFG676I is a Virtex-4 LX field-programmable gate array with 13,824 logic cells, 320 user I/O, and a 676-ball FCBGA package. The -10 suffix identifies the performance grade, while the I suffix denotes the industrial temperature option. Built on a 90 nm process with a 1.2 V core supply, this device belongs to the FPGA and CPLD category within programmable logic semiconductors.

The Virtex-4 LX architecture combines programmable logic, block RAM, dedicated DSP arithmetic, and programmable I/O in a single monolithic device. This combination makes the XC4VLX15 suitable for parallel signal processing, embedded control, industrial protocol bridging, and high-speed data acquisition. Its 320 I/O provide substantial connectivity for parallel buses, memory interfaces, clock distribution, and multi-channel control logic.

Key engineering characteristics include the 90 nm process node, 1.2 V core voltage, 13,824 logic cells, and 320 user I/O. The device uses a 676-BBGA FCBGA package and supports the -10 speed grade. The Xilinx Virtex-4 product family uses configurable logic blocks and selectable I/O standards, allowing a design to combine multiple interface types while retaining deterministic timing within each supported I/O standard.

Typical uses include industrial machine vision, test-and-measurement acquisition systems, telecom signal conditioning, embedded DSP pipelines, and communications equipment. Its 320 I/O make it particularly suitable for parallel ADC and DAC interfaces, where many data, clock, and control signals must terminate in one device. The FPGA can also implement protocol converters, timing controllers, and real-time data filters.

PCB implementation requires careful treatment of the 676-ball BGA footprint. Signal-integrity and power-delivery design should follow the manufacturer's package pinout files, including prescribed ball assignments for configuration pins, dedicated pins, and supply connections. Use the AMD Virtex-4 package device pinout files when assigning tracks and verifying every ball location.

Because this is a legacy programmable-logic device, engineers should confirm toolchain support, bitstream compatibility, I/O voltage requirements, and end-of-life purchasing status before starting a new design. Existing industrial and telecommunications platforms can retain a stable upgrade path by using the same XC4VLX15 device family and package variants rather than redesigning the board.

直接替换替代料: XC4VLX15-10FFG676I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: XC4VLX15-10FFG676I (相同外形与封装尺寸) ——差异在于 Device Type, Package, Package Type, Speed Grade, Process Technology.

AMD
Device Type: Field Programmable Gate Array (FPGA)
Package: 676-BBGA
对比 XC4VLX15-10FFG676I →
AMD
Package Type: 676-pin Flip-Chip Ball Grid Array
对比 XC4VLX15-10FFG676I →
AMD
Package: 676-pin FCBGA
Process Technology: 90 nm CMOS
对比 XC4VLX15-10FFG676I →
AMD
Package: 676-BBGA FCBGA
Package Type: BGA
Speed Grade: -12
对比 XC4VLX15-10FFG676I →
AMD
Device Type: Virtex-4 LX field-programmable gate array (FPGA)
Package: 676-BBGA FCBGA
Speed Grade: -12
对比 XC4VLX15-10FFG676I →

XC4VLX15-10FFG676C

✅ 直接替换
AMD
📦 676-BBGA FCBGA
Virtex-4 LX Field-Programmable Gate Array · 13,824 logic cells · 1,536 CLBs · 320 I/O · 884,736 bits · 1.2 V · 90 nm CMOS · -10

联系询价

查看数据手册 →

XC4VLX15-12FFG676C

✅ 直接替换 ⚠️ 规格未核验
AMD
📦 676-BBGA FCBGA
Virtex-4 LX field-programmable gate array (FPGA) · 320 outputs · 676-BBGA FCBGA · 676 balls · -12 · AMD / Xilinx · Virtex-4 LX

联系询价

查看数据手册 →

XC4VLX15-12FF676C

✅ 直接替换
AMD
📦 676-BBGA FCBGA
Virtex-4 LX Field-Programmable Gate Array · 13,824 cells · 320 I/O · 90 nm CMOS · 1.2 V · -12 · 676-BBGA FCBGA · BGA

联系询价

查看数据手册 →

XC4VLX15-10FFG676E

✅ 直接替换 ⚠️ 规格未核验
📦 676-BBGA FCBGA
Same -10 speed grade and 676-ball footprint, with an E rather than I temperature-grade designation

📋 参考替代料(不在目录中)

XC4VLX15-12FFG676E

✅ 直接替换 ⚠️ 规格未核验
📦 676-BBGA FCBGA
Same device and 676-ball footprint; -12 speed grade versus -10 and E rather than I temperature designation

📋 参考替代料(不在目录中)

XC4VLX15-10FFG676I 最大额定值与电气特性

Device Type Virtex-4 LX field-programmable gate array
Logic Cells 13,824 cells
User I/O 320 I/O
Process Technology 90 nm
Core Supply Voltage 1.2 V
Speed Grade -10
Temperature Grade Industrial
Package Type 676-BBGA FCBGA
Package Pin Count 676 balls
Architecture ASMBL Virtex-4 architecture
安装类型 Surface mount
Lead-Free Status Lead free
RoHS 状态 RoHS compliant

XC4VLX15-10FFG676I 676 balls 引脚配置指南

XC4VLX15-10FFG676I(676 balls 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XC4VLX15-10FFG676I 的 676 balls 封装引脚图

暂无详细引脚数据: XC4VLX15-10FFG676I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XC4VLX15-10FFG676I 适用于 6 应用s: Parallel Data Acquisition, Industrial Machine Vision, Communications Protocol Conversion, Real-Time DSP Filtering, Test and Measurement Instrumentation, Embedded System Control.

📺

Parallel Data Acquisition

The XC4VLX15-10FFG676I fits parallel ADC and DAC boards that need many simultaneous sampling and control paths. Its 320 user I/O can connect wide data buses, clocks, triggers, and status signals without requiring multiple interface devices, while the 13,824 logic cells provide capacity for sample sequencing, digital correction, and buffering. The 90 nm Virtex-4 LX implementation is appropriate for a legacy industrial instrument. Keep each interface within its supported I/O standard, route clocks with matched skew, and use the official package pinout files before assigning the 676-ball footprint. Because the device is an industrial-grade -10 part, its thermal and timing behavior must be checked against the enclosure temperature and the original timing constraints.

🏭

Industrial Machine Vision

Machine-vision controllers benefit from the XC4VLX15-10FFG676I's combination of 320 I/O and programmable logic resources. Parallel camera interfaces, encoders, exposure controls, trigger distribution, and actuator outputs can be implemented in one device, while on-chip logic can perform pixel formatting or timing checks. The industrial temperature designation supports controlled factory environments where the commercial-grade alternatives may be marginal. Implement camera data paths with source-synchronous interfaces only where the selected I/O standard and board topology support them, and place decoupling close to each supply ball. Validate the complete 676-BBGA assembly process because thermal management and solder-joint reliability become important as accelerator, memory, and communications devices cluster around the FPGA.

🌐

Communications Protocol Conversion

The XC4VLX15-10FFG676I can serve as a protocol-conversion and packet-processing element in legacy communication equipment. Its 320 user I/O support multiple parallel channels, while the Virtex-4 LX logic fabric can implement framing, rate adaptation, buffering, and clock-domain isolation. The -10 speed grade provides a defined timing target for designs already qualified around the original ordering code. Use the manufacturer's supported I/O standards for each external interface and design clock-domain crossings with appropriate constraints. A higher-speed -12 variant may add timing margin, but it should not replace the -10 device without repeating static timing, power, and thermal verification. The industrial grade is preferable when the converter is installed in a plant cabinet or network enclosure.

⚡

Real-Time DSP Filtering

The XC4VLX15-10FFG676I is appropriate for small real-time FIR, IIR, decimator, and adaptive-filter pipelines where fixed-function DSP would be inflexible. The FPGA fabric supports parallel arithmetic, local block memory, and deterministic latency, while the 1.2 V core architecture is characteristic of the 90 nm Virtex-4 generation. Designers should use synthesis and implementation reports to confirm multiplier, block-RAM, and timing utilization rather than estimating resources from the logic-cell count alone. Constrain all clocks, keep DSP and RAM interfaces close to the relevant logic, and reserve switching activity for predictable timing closure. For a running industrial platform, retaining the -10 grade avoids changing timing margins or power behavior that were validated in the original design.

🔧

Test and Measurement Instrumentation

The XC4VLX15-10FFG676I can coordinate counters, pattern generation, capture logic, and timing control in a programmable measurement instrument. With 320 user I/O, it can support parallel DUT stimulation and response capture, while its configurable logic permits reusable channel counts and programmable test sequences. For laboratory instruments that require stable industrial-temperature operation, the I-grade ordering option retains that qualification class. Keep high-fanout clock and control traces short, use controlled-impedance routing for external interfaces, and isolate analog sections from digital switching activity. Existing Virtex-4 designs can reuse their configuration concepts and package layout, but any alternative must preserve the exact 676-ball footprint, supply requirements, and speed grade.

🖥️

Embedded System Control

The XC4VLX15-10FFG676I can act as a central control fabric for legacy embedded equipment with extensive peripheral connectivity. Its 320 I/O can connect memories, actuators, sensors, and inter-module interfaces, while internal logic can implement state machines, health monitoring, and fault handling. The device is particularly relevant where an industrial control platform must be maintained without changing its 676-BBGA board layout. Implement dedicated configuration, reset, and clock resources according to the manufacturer package files, and maintain independent supplies for core and I/O requirements defined by the device documentation. A commercial-temperature replacement is acceptable only if the enclosure's worst-case ambient and conducted heat remain within its rating, while a higher speed grade requires fresh timing and power analysis.

What is the XC4VLX15-10FFG676I?
The XC4VLX15-10FFG676I is a Xilinx Virtex-4 LX FPGA containing 13,824 logic cells and 320 user I/O in a 676-ball FCBGA package. According to the manufacturer device data, it is manufactured on a 90 nm process and uses a 1.2 V core supply. It is intended for industrial applications requiring deterministic programmable logic, parallel data acquisition, embedded memory, and high pin connectivity.
What does the -10 and I suffix mean in XC4VLX15-10FFG676I?
The -10 suffix identifies the Virtex-4 LX -10 performance grade, while the final I identifies the industrial temperature option. The FFG676 portion identifies the 676-ball flip-chip ball-grid-array package. Package and speed-grade suffixes must be matched exactly during replacement because a different package requires a PCB land-pattern change and a different speed grade can alter timing closure.
Where can I download the XC4VLX15 datasheet PDF?
The XC4VLX15 device documentation is available through the Xilinx and AMD documentation resources, with the Virtex-4 data sheet covering product overview, architecture, electrical characteristics, and package information. Use the AMD Virtex-4 package device pinout files for the authoritative ball list and footprint geometry. The device datasheet is the correct source for configuration pins, supply rails, DC characteristics, and speed-grade details.
Where can I find the XC4VLX15-10FFG676I pinout and 676-BBGA footprint?
The XC4VLX15-10FFG676I pinout is published in the AMD Virtex-4 package device pinout files, which provide ASCII package data for each device and package combination. Use those files to confirm all 676 ball assignments before routing. The component uses a 676-BBGA FCBGA package, so the board land pattern, via arrangement, solder mask, and assembly stencil must match the package drawing rather than a generic BGA layout.
What are the key specifications of XC4VLX15-10FFG676I that engineers should know?
The key XC4VLX15-10FFG676I specifications are 13,824 logic cells, 320 user I/O, a 1.2 V core supply, a 90 nm process, a -10 speed grade, and a 676-ball FCBGA package. The device is a Virtex-4 LX FPGA with the ASMBL architecture. Its large I/O count supports parallel converters and multi-channel acquisition, while the industrial suffix supports extended-temperature deployment when paired with appropriate system-level thermal design.
Can XC4VLX15-10FFG676C replace XC4VLX15-10FFG676I?
The XC4VLX15-10FFG676C has the same electrical speed grade and 676-ball package as the XC4VLX15-10FFG676I, so its logic resources and physical footprint align. The primary difference is the temperature grade: the I suffix denotes industrial temperature capability while the C suffix denotes commercial temperature capability. It is only a suitable substitute when the finished equipment stays within the commercial temperature limits of the replacement.
Can XC4VLX15-12FFG676C replace XC4VLX15-10FFG676I?
The XC4VLX15-12FFG676C shares the XC4VLX15 device and 676-ball package, and its -12 grade offers higher performance than the target's -10 grade. Pin compatibility is therefore strong, but the operating temperature grade changes from industrial to commercial. Use it only where ambient conditions remain inside the commercial range and re-verify timing because the higher speed grade changes internal timing behavior and power characteristics.
What is the best drop-in replacement for XC4VLX15-10FFG676I?
The closest drop-in replacement is a Virtex-4 LX 15 device with the same -10 speed grade and 676-ball FFG package. The XC4VLX15-10FFG676C matches the footprint and performance grade but is a commercial-temperature part. The XC4VLX15-10FFG676E is preferable when its extended temperature coverage satisfies the application. Confirm the complete ordering code, temperature coverage, power behavior, and design-tool support before substitution.
When should I choose XC4VLX15-10FFG676I over a -12 speed-grade variant?
Choose the XC4VLX15-10FFG676I when an industrial-temperature board must be reproduced exactly and the -10 timing performance satisfies the design. The -12 grade offers additional performance margin but is generally a different ordering option whose cost, power, and temperature requirements must be reassessed. For an unchanged production build, retaining the original ordering code reduces the risk of configuration, qualification, and procurement deviations.
Is XC4VLX15-10FFG676I suitable for a high-speed data acquisition system?
The XC4VLX15-10FFG676I is suitable for parallel data-acquisition systems because it provides 320 user I/O, 13,824 logic cells, and programmable I/O in a single device. It can implement channel control, sample sequencing, filtering, and buffering in parallel. System-level signal integrity still depends on selecting an appropriate I/O standard, controlling clock skew, and terminating interfaces according to the device and board constraints.
What can replace the XC4VLX15-10FFG676I in a legacy industrial controller?
A Virtex-4 LX 15 variant with the same FFG676 package and -10 speed grade is the most direct replacement for a legacy industrial controller. The XC4VLX15-10FFG676C preserves the footprint and electrical grade but is limited to commercial temperature conditions, while the XC4VLX15-10FFG676E retains the -10 grade and offers a different temperature designation. Verify the existing board's ambient range and qualification requirements.
Is the XC4VLX15-10FFG676I the same as XC4VLX15-10FFG676C?
No. The XC4VLX15-10FFG676I and XC4VLX15-10FFG676C share the same Virtex-4 LX 15 device, -10 speed grade, and 676-ball package, but they carry different temperature-grade suffixes. The I version is the industrial option and the C version is the commercial option. They are not interchangeable for deployments that require the full industrial temperature range.
What is the AMD Xilinx equivalent for XC4VLX15-10FFG676I?
The AMD Xilinx equivalent remains XC4VLX15-10FFG676I, because Xilinx is now part of AMD and the full ordering code identifies the same device, speed grade, package, and temperature class. Changing only the manufacturer name does not create a different electrical part. For a different source, request the complete MPN through the Request a Quote form on this page so that the suffix details are not lost in transcription.
Where can I buy XC4VLX15-10FFG676I?
Use the Request a Quote form on this page to request XC4VLX15-10FFG676I availability, current lead time, and minimum order quantity. Because the device belongs to a mature Virtex-4 generation, stock and traceability should be confirmed for the exact ordering code rather than relying on a generic FPGA listing. Specify factory traceability requirements and the 676-ball FFG package in the request.
What is the price of XC4VLX15-10FFG676I?
The current commercial terms for XC4VLX15-10FFG676I are provided through the Request a Quote form on this page. For a mature FPGA, pricing can vary with quantity, programmed configuration, test documentation, and traceability level. The form allows the request to be tied to the exact 10FFG676I ordering code rather than a generic Virtex-4 device, which reduces the risk of receiving a different speed or temperature variant.
Is XC4VLX15-10FFG676I currently in stock and what is its lead time?
Current stock and lead time for XC4VLX15-10FFG676I are handled through the Request a Quote form on this page. For an end-of-life FPGA, supply may depend on remaining factory inventory, authorized sourcing, or qualified legacy inventory. Provide the required quantity, target date, and inspection level so the supplier can confirm an exact-match part number and delivery schedule.

工程参考数据: XC4VLX15-10FFG676I ——对比、设计指导和合规信息。

选型指南

Select the XC4VLX15-10FFG676I when maintaining an existing industrial design that was qualified around the -10 speed grade and the 676-ball FCBGA footprint. The XC4VLX15-10FFG676C is the closest same-speed substitute, but its commercial temperature grade makes it appropriate only where ambient conditions remain within commercial limits. The XC4VLX15-10FFG676E is preferable when an extended-temperature part is acceptable and its exact temperature specification satisfies the system requirement. The XC4VLX15-12FFG676C, XC4VLX15-12FF676C, and XC4VLX15-12FFG676E provide a higher performance grade in the same package, but they change timing and power characteristics and should be used only after implementation, thermal, and qualification checks. For a production continuation, retaining the exact original ordering code is generally the lowest-risk choice.

与替代料对比

参数 本产品 XC4VLX15-10FFG676C XC4VLX15-12FFG676C XC4VLX15-12FF676C XC4VLX15-10FFG676E XC4VLX15-12FFG676E
Package 676-BBGA FCBGA 676-BBGA FCBGA - same 676-BBGA FCBGA - same 676-BBGA FCBGA - same 676-BBGA FCBGA - same 676-BBGA FCBGA - same
Brand Xilinx Xilinx Xilinx Xilinx Xilinx Xilinx
Logic Cells 13,824 cells 13,824 cells 13,824 cells 13,824 cells 13,824 cells 13,824 cells
User I/O 320 I/O 320 I/O 320 I/O 320 I/O 320 I/O 320 I/O
Speed Grade -10 -10 - same -12 - higher performance grade -12 - higher performance grade -10 - same -12 - higher performance grade
Temperature Grade Industrial Commercial Commercial Commercial E temperature designation E temperature designation
Process Technology 90 nm 90 nm 90 nm 90 nm 90 nm 90 nm
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V

关键差异点

  • Retains the industrial temperature designation for controlled industrial deployments (对比 XC4VLX15-10FFG676C)
  • Matches the original -10 performance class instead of changing timing behavior (对比 XC4VLX15-12FFG676C)
  • Provides a direct same-footprint path for industrial-grade service sourcing (对比 XC4VLX15-12FF676C)

设计说明

Use the AMD Virtex-4 package device pinout files to verify every one of the 676 ball locations before routing. Preserve the package-specific power, ground, configuration, and dedicated-pin assignments rather than relying on a generic BGA symbol. Place all required decoupling capacitors at their prescribed package pins, keep the supply and ground planes continuous beneath the device, and follow the package drawing for via-in-pad or via-under-bump options.

Virtex-4 performance depends heavily on predictable clock distribution and registered I/O paths. Route clock networks on dedicated layers with symmetrical topology, avoid stubs on sensitive nets, and apply the vendor's clocking guidance. For external data interfaces, use controlled-impedance routing, maintain return paths beneath high-speed traces, and place series termination or other interface-specific components where the chosen I/O standard requires them.

The 90 nm Virtex-4 device can dissipate meaningful power in high-utilization designs even though its core voltage is only 1.2 V. Route heat through the package substrate into the PCB and use the device-specific thermal model to estimate junction temperature. Avoid placing the FPGA beside heat sources without a thermal path, and evaluate the enclosure with the maximum expected logic activity rather than an idle configuration.

Do not treat two XC4VLX15 devices with the same ball count as interchangeable without checking every suffix. The -10 and -12 portions select speed grade, while C, E, and I identify temperature classes; the FF versus FFG package codes also carry different assembly information. A higher speed grade changes timing and power characteristics, and a commercial-grade device may not satisfy an industrial ambient requirement even when its electrical pins match.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

RoHS-compliant and lead-free status are associated with the XC4VLX15-10FFG676C ordering information for this device family. No vehicle-specific AEC-Q100 qualification is indicated for this catalog FPGA.

相关搜索

xc4vlx15 10sfg363c XC4VLX15-10FFG676I datasheet XC4VLX15-10FFG676I pinout XC4VLX15-10FFG676I footprint XC4VLX15-10FFG676I price XC4VLX15-10FFG676I stock Xilinx XC4VLX15-10FFG676I XC4VLX15-10FFG676I equivalent XC4VLX15-10FFG676I replacement XC4VLX15-10FFG676I vs XC4VLX15-10FFG676C XC4VLX15 676 FCBGA FPGA XC4VLX15 application circuit

相关元器件 & 术语

Xilinx AMD Xilinx XC4VLX15-10FFG676I XC4VLX15-10FFG676C XC4VLX15-12FFG676C XC4VLX15-12FF676C XC4VLX15-10FFG676E XC4VLX15-12FFG676E Virtex-4 LX FPGA CPLD programmable logic ASMBL architecture logic cell block RAM DSP slice FCBGA 676-BBGA ball grid array surface-mount package 90 nm process 1.2 V core supply 320 user I/O RoHS industrial temperature grade
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情