XC6SLX150T-2FG676C 147443-Cell FPGA | AMD Xilinx
MPN: XC6SLX150T-2FG676C ✗ Cuối đờiXC6SLX150T-2FG676C Tóm tắt
A field-programmable gate array is a programmable logic device whose digital circuits are configured after fabrication. Within the semiconductor hierarchy, an FPGA sits above basic logic cells and combines configurable logic, memory, fixed-function blocks, and I/O into a device used for parallel processing, signal processing, control, and system integration. The Spartan-6 LXT family is designed for performance-oriented embedded applications where substantial logic density and dedicated resources are required.
The device provides 147,443 logic cells and 396 user I/O in a 676-pin FCBGA package. Its 45 nm process technology supports integration of 6.25 Kb block RAM and 48 DSP slices according to the AMD Spartan-6 family documentation. A 1.2 V core voltage supports lower-voltage digital operation, while the large I/O count allows simultaneous connection to memory, interfaces, converters, and control peripherals.
The -2 designator identifies the device performance grade. Programmable logic, configuration memories, dedicated DSP blocks, and I/O resources are organized for parallel workloads that are awkward to implement efficiently with microcontrollers or general-purpose processors. This architecture is particularly effective for data acquisition, communications, control, signal processing, and high-throughput data movement.
Typical uses include industrial control systems, communication infrastructure, video processing, test equipment, instrumentation, industrial networking, and embedded signal-processing platforms. The 396 available I/O make the device appropriate for systems requiring multiple buses and data interfaces, while the 676-pin package supports dense board routing and high pin count.
PCB design must follow the AMD package pinout, power-sequencing recommendations, decoupling requirements, and configuration guidelines exactly. A 676-pin BGA demands careful escape routing, adequate power and ground planes, thermal-via placement, and controlled assembly processing. Differential interfaces and high-speed signals require length-aware routing and return-path planning.
This component page combines package and resource details, documented family alternatives, application guidance, comparison parameters, and practical PCB implementation considerations to support design review and sourcing without requiring engineers to reconstruct the complete decision path from separate documents.
Bộ thay thế dễ dàng lắp đặt cho XC6SLX150T-2FG676C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC6SLX150T-2FG676C (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Process Technology, Lead-Free Status, Package Pitch.
XC6SLX150T-2FG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC6SLX150T-2FGG676C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC6SLX150T-2FGG676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC6SLX150T-3FG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC6SLX150T-3FGG676C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC6SLX150T-2FG676C Tỷ lệ tối đa & tính chất điện
| Device Type | Spartan-6 LXT Field Programmable Gate Array |
| Logic Cells | 147,443 cells |
| User I/O Count | 396 I/O |
| Process Technology | 45 nm |
| Core Supply Voltage | 1.2 V |
| Hộp | 676-pin FCBGA |
| Performance Grade | -2 |
| Architecture | Spartan-6 LXT FPGA |
| Programmable Logic | 147,443 logic cells |
| Block RAM | 6.25 Kb block RAM |
| DSP Resources | 48 DSP slices |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân XC6SLX150T-2FG676C 676-pin fcbga
Cấu hình chân cho XC6SLX150T-2FG676C (676-pin fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC6SLX150T-2FG676C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC6SLX150T-2FG676C phù hợp cho 6 Áp dụngs: Industrial Data Acquisition, Communication Infrastructure, Video Processing, Test and Measurement Equipment, Industrial Networking Gateways, Aerospace Control Prototypes.
Industrial Data Acquisition
The XC6SLX150T-2FG676C fits industrial measurement systems that must acquire and process many sensor channels in parallel. Its 396 I/O can connect multiplexers, analog-to-digital converters, digital isolators, counters, and communication transceivers without relying on a low-pin-count microcontroller. The 48 DSP slices accelerate filtering, correlation, and fixed-point transforms, while 147,443 logic cells support acquisition state machines, timestamp handling, buffering, and control logic. Design the interface around the exact I/O standards and timing constraints in the AMD datasheet, and place decoupling and analog-converter connections away from high-speed switching regions.
Được đề xuất
Communication Infrastructure
The XC6SLX150T-2FG676C is suitable for communication equipment requiring parallel packet processing, protocol conversion, or high-speed interface aggregation. Its large logic-cell count supports multiple channels and buffering layers, while the dedicated DSP resources accelerate filtering, symbol processing, and payload transforms. The 396 I/O provide substantial connectivity for parallel data buses, clocks, control signals, and network transceivers. A practical design assigns clock-capable pins according to the AMD pinout, applies the correct I/O voltage standards, and keeps high-speed routing short and impedance controlled. Legacy upgrades also require verification that the selected Spartan-6 configuration bitstream and external memory interface remain supported.
Được đề xuất
Video Processing
The XC6SLX150T-2FG676C can implement parallel video pipelines because its programmable logic, block RAM, and 48 DSP slices support pixel transport, filtering, and format conversion. The 396 I/O allow direct connection to parallel sensors, frame-capture devices, converters, and memory interfaces, reducing the need for external glue logic. A designer can map line buffers and processing stages across the Spartan-6 fabric while using dedicated DSP slices for arithmetic-heavy stages. Practical implementation requires verified video-clocking resources, compliant I/O voltage standards, registered boundaries for timing closure, and PCB routing that separates high-speed interfaces from sensitive power and ground paths.
Được đề xuất
Test and Measurement Equipment
The XC6SLX150T-2FG676C fits high-channel-count instrumentation that combines acquisition, pattern generation, real-time processing, and control. Its 147,443 logic cells provide substantial parallelism for sequencing and digital analysis, while 396 I/O expose enough connections for precision converters, reference interfaces, trigger logic, and communication ports. The 48 DSP slices support FIR filters, decimation, modulation, and numerical correction algorithms. For laboratory equipment, isolate analog and digital sections, use continuous reference and power planes, and provide a dedicated configuration path. Timing closure should be based on the -2 grade limits rather than assumptions from the faster -3 ordering option.
Được đề xuất
Industrial Networking Gateways
The XC6SLX150T-2FG676C is applicable to protocol-conversion and industrial networking gateways that must move data among multiple serial and parallel interfaces. Its large fabric supports queues, packet classification, protocol translation, and control-plane logic, while 6.25 Kb block RAM supports buffering and the DSP slices assist payload processing. The 396 I/O can accommodate network transceivers, management interfaces, status indicators, and configuration pins. A robust layout requires controlled-length clock routing, uninterrupted return paths for high-speed links, carefully placed power planes, and thermal vias beneath the large BGA. Verify transceiver voltage levels and supported I/O standards before assigning package balls.
Được đề xuất
Aerospace Control Prototypes
The XC6SLX150T-2FG676C can support prototype aerospace and defense control systems when its environmental, reliability, and qualification requirements satisfy the program specification. Its parallel programmable architecture handles multi-axis control, sensor fusion, fault monitoring, and interface management, with 396 I/O providing connections to analog, digital, and communication subsystems. The 48 DSP slices are useful for filtering and control-loop arithmetic. Because this ordering code is not documented as AEC-Q100 qualified, the product cannot automatically satisfy automotive or aerospace qualification requirements. Programs must separately verify radiation, temperature, reliability, screening, obsolescence, and long-term sourcing conditions before incorporating the device into a flight configuration.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC6SLX150T-2FG676C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC6SLX150T-2FG676I | XC6SLX150T-2FGG676C | XC6SLX150T-2FGG676I | XC6SLX150T-3FG676C | XC6SLX150T-3FGG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA |
| Logic Cells | 147,443 cells | 147,443 cells | 147,443 cells | 147,443 cells | 147,443 cells | 147,443 cells |
| User I/O | 396 I/O | 396 I/O | 396 I/O | 396 I/O | 396 I/O | 396 I/O |
| Process Technology | 45 nm | 45 nm | 45 nm | 45 nm | 45 nm | 45 nm |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Performance Grade | -2 | -2 | -2 | -2 | -3 | -3 |
| Temperature Ordering Suffix | C | I | C | I | C | C |
| Package Designation | FG676C | FG676I | FGG676C | FGG676I | FG676C | FGG676C |
| Block RAM | 6.25 Kb block RAM | 6.25 Kb block RAM | 6.25 Kb block RAM | 6.25 Kb block RAM | 6.25 Kb block RAM | 6.25 Kb block RAM |
| DSP Slices | 48 DSP slices | 48 DSP slices | 48 DSP slices | 48 DSP slices | 48 DSP slices | 48 DSP slices |
Bảo phân biệt quan trọng
- Preserves the established -2 performance grade (vsXC6SLX150T-3FG676C)
- Matches the original commercial ordering suffix (vsXC6SLX150T-2FG676I)
- Matches the specified FG676 package designation (vsXC6SLX150T-2FGG676C)
- Combines high logic density with extensive I/O (vsXC6SLX150-2FG676C)
Ghi chú thiết kế
Treat the 676-pin FCBGA as a high-density escape-routing problem. Assign board layers, vias, and assembly rules from the AMD package drawing rather than extrapolating from a generic 676-ball library. Keep power and ground planes continuous, place high-frequency decoupling close to the relevant supply balls, and preserve uninterrupted reference planes beneath high-speed routes. Confirm the exact FG or FGG package drawing before releasing PCB artwork because the ordering suffix alone is not sufficient to validate mechanical interchangeability.
Implement the complete AMD Spartan-6 power-supply topology rather than applying generic FPGA decoupling values. Account separately for core, auxiliary, and I/O supplies, including their permitted sequencing and ramp requirements. Place bulk and local ceramic capacitance at the points specified by the reference design, keep switching-regulator loops compact, and isolate sensitive analog supplies where the design uses external converters. Validate steady-state current, startup current, droop, and sequencing with the selected -2 operating condition.
The 676-pin BGA can move substantial heat through its balls and exposed package structures, but board construction determines how effectively that heat reaches the enclosure. Use the manufacturer-recommended thermal-via pattern and copper distribution beneath the device, then estimate junction temperature from actual board thermal resistance and the actual core, auxiliary, and I/O power dissipation. Use measured or validated worst-case power rather than a nominal design estimate. Maintain airflow or conductive cooling as necessary to keep the device inside its qualified temperature range.
Route clock, configuration, serial transceiver, and other high-speed interfaces with continuous reference planes and controlled impedance. Use the exact AMD clock-capable pin assignments from the package table; do not assume that any adjacent user I/O can replace a clock input. Minimize stub effects, keep configuration traces away from noisy power-converter regions, and observe any source-synchronous or differential timing constraints specified for the selected I/O standards.
The most common replacement error is assuming that identical logic-cell counts and 676-ball packages guarantee drop-in compatibility. Before substituting an XC6SLX150T ordering variant, compare the package drawing, ball map, temperature class, performance grade, supply requirements, configuration pins, power-up behavior, and timing limits. A -3 grade may alter timing and power behavior, while an I or G suffix can change ordering and package attributes. Preserve the original bitstream and validate the complete design after any substitution.
Thông tin tuân thủ
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was established for the exact ordering code. AEC-Q100 status is not applicable because this is an FPGA rather than an automotive-qualified discrete semiconductor.