XC7Z035-1FBG676C Dual-Core Zynq SoC | AMD/Xilinx
MPN: XC7Z035-1FBG676C ✓ Hoạt độngXC7Z035-1FBG676C Tóm tắt
A Zynq-7000 SoC is a heterogeneous programmable platform that integrates an ARM Cortex-A9-based processing system and Xilinx FPGA fabric on one semiconductor device. Within the product hierarchy, it is a system-on-chip, embedded processor FPGA, programmable logic device, and semiconductor. This integration can reduce the number of discrete components required when a design needs both application processing and flexible hardware acceleration.
The XC7Z035 portion provides 275K logic cells for programmable interfaces, control logic, signal processing, and accelerator datapaths. Its dual-core ARM Cortex-A9 MPCore subsystem operates at 667 MHz and includes CoreSight debug capabilities. The 676-FCBGA package supports high-density pinout requirements for the Zynq-7000 family and is associated with a 27 x 27 mm body size in the product documentation.
AMD documents the XC7Z035 in the Zynq-7000 SoC data sheet covering the XC7Z030, XC7Z035, and XC7Z045 families. A separate package placement document addresses XC7Z35-FBG676 and FFG676 devices, while the official package-pinout resource provides package files for design verification. These documents are important because processor performance alone does not establish PCB compatibility; speed grade, package marking, temperature designation, and ball assignments must also be checked.
Typical uses include industrial control, machine vision, communications infrastructure, networked equipment, test and measurement systems, and embedded applications that combine Linux-capable processing with programmable hardware. The processor subsystem is suitable for operating systems, networking stacks, and control software, while the FPGA fabric can implement deterministic parallel datapaths, custom interfaces, or hardware-assisted acceleration.
PCB design should preserve the 676-FCBGA land pattern, power and ground distribution, and decoupling arrangement defined by the AMD documentation. Because the device combines a processor system with programmable I/O, careful separation of sensitive clock, transceiver, and high-speed interface routing is essential. Configuration storage, startup sequencing, bank-voltage constraints, and the selected design tools must also be validated before production release.
This page combines the verified device identity, package details, family documentation, pricing evidence, application guidance, and same-package migration options into an engineering-focused reference. It also highlights the verification steps needed when considering an FPGA or SoC replacement, where package compatibility alone does not guarantee identical software timing, power behavior, configuration, or lifecycle requirements.
Bộ thay thế dễ dàng lắp đặt cho XC7Z035-1FBG676C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7Z035-1FBG676C (cùng hình factor và footprint) — khác nhau ở Device Type, Package, Mounting Type, Processor Core, FPGA Logic Cells.
XC7Z035-1FBG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z035-1FFG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z035-1FBG676C Tỷ lệ tối đa & tính chất điện
| Device Type | Zynq-7000 Kintex-7 programmable system-on-chip |
| Processing System | Dual-core ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| Debug Support | CoreSight |
| FPGA Family | Kintex-7 |
| Logic Cells | 275K |
| Process Technology | 28 nm |
| Package Type | 676-pin FCBGA |
| Package Dimensions | 27 x 27 mm |
| Device Family | Zynq-7000 SoC |
| Speed Grade | -1 |
| Embedded Hard Processor | ARM Cortex-A9 MPCore |
| Programmable Logic | Kintex-7 FPGA fabric |
| Kiểu lắp đặt | Surface-mount BGA |
Hướng dẫn cấu hình chân XC7Z035-1FBG676C 27 x 27 mm
Cấu hình chân cho XC7Z035-1FBG676C (27 x 27 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7Z035-1FBG676C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7Z035-1FBG676C phù hợp cho 6 Áp dụngs: Industrial Machine Control, Machine Vision Processing, Industrial Networking Equipment, Test and Measurement Systems, Embedded Data Acquisition, Secure Network Appliances.
Industrial Machine Control
The XC7Z035-1FBG676C fits machine-control systems that combine deterministic automation logic with a higher-level operating system. Its dual-core ARM Cortex-A9 subsystem can run communications, diagnostics, and supervisory software at 667 MHz, while the 275K Kintex-7 logic cells can implement motion sequencing, I/O timing, encoder processing, and parallel control functions. The architecture avoids partitioning simple fixed logic from higher-level processing across separate devices. Engineers should allocate deterministic tasks to the programmable fabric, reserve the processor subsystem for supervisory workloads, and validate latency at the system level. The 676-FCBGA package is dense, so power integrity, thermal performance, and full-ball escape routing require early PCB and enclosure planning.
Được đề xuất
Machine Vision Processing
The XC7Z035-1FBG676C is suitable for machine-vision controllers that divide pixel transport, preprocessing, and decision logic between programmable hardware and software. The 275K Kintex-7 fabric can accelerate fixed-function image operations or interface to multiple sensors, while the dual Cortex-A9 cores handle control flow, networking, and higher-level inference. A synchronized design avoids moving time-critical pixel movement through a software-only path. Power, clocking, and board-channel integrity become especially important when cameras, sensors, and FPGA fabric share the same platform. Engineers should establish bandwidth budgets for image data and use AMD pinout and reference-design information to validate connector, memory, and clock-routing choices before schematic completion.
Được đề xuất
Industrial Networking Equipment
The XC7Z035-1FBG676C can serve as the principal processor in industrial networking equipment that combines packet handling with custom hardware interfaces. The dual-core ARM Cortex-A9 MPCore configuration at 667 MHz supports network stacks and control software, while the Kintex-7 fabric can implement protocol acceleration, traffic shaping, monitoring, or vendor-specific data paths. This architecture can reduce serial-device count and improve control over timing compared with a processor-only implementation. Design teams should confirm the required media interfaces and supported PHY devices, then isolate high-speed routing, provide deterministic clocks, and account for connector and thermal requirements. Because the package contains 676 balls, multilayer PCB planning and power-plane segmentation deserve attention from the first board revision.
Được đề xuất
Test and Measurement Systems
The XC7Z035-1FBG676C is appropriate for test and measurement products requiring flexible acquisition, sequencing, and analysis in one programmable platform. The ARM subsystem can run the instrument control plane, user interface services, and data management, while the FPGA fabric can implement timing-critical capture, stimulus generation, or signal conditioning. The 667 MHz processor performance and 275K logic capacity provide a balanced architecture for mixed workloads. Engineers should divide acquisition bandwidth between programmable logic and memory interfaces early, because adding logic later may create routing congestion. Thermal design, clock jitter, analog isolation, and digital-to-analog separation must be addressed at the system architecture level. The device's dense FCBGA package requires careful component placement and multilayer escape-routing strategy.
Được đề xuất
Embedded Data Acquisition
The XC7Z035-1FBG676C fits embedded acquisition systems where sensors, converters, and communications channels must feed a processor without relying entirely on a host processor. Its dual Cortex-A9 cores can organize buffering, configuration, calibration, and communications at 667 MHz, while the FPGA fabric can normalize multiple input streams, perform thresholding, or execute time-domain transforms. Hardware partitioning permits acquisition paths to remain deterministic while software manages the broader application. Engineers should define the clock tree and memory bandwidth before fixing the PCB, because the 676-FCBGA device leaves limited routing space around the package. Thermal analysis, bank-power sequencing, configuration boot behavior, and recovery after power faults should also be validated for unattended equipment.
Được đề xuất
Secure Network Appliances
The XC7Z035-1FBG676C can support secure network appliances that need a conventional processor environment alongside programmable packet-processing or cryptographic-adjacent datapaths. The ARM Cortex-A9 subsystem handles operating-system services and control functions, while the 275K Kintex-7 fabric can be configured for protocol-specific acceleration or hardware-assisted filtering. This integration can reduce board area and simplify control between the network stack and dedicated logic. For production designs, verify device-specific security features, configuration protection requirements, boot sequencing, and the exact AMD tools or IP required by the design. High-speed interfaces should be routed over continuous reference planes, and the dense package demands careful via, escape-routing, and thermal modeling before fabrication.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7Z035-1FBG676C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7Z035-1FBG676I | XC7Z035-1FFG676C |
|---|---|---|---|
| Package | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) |
| Brand | AMD | AMD | AMD |
| Processor Subsystem | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore | Dual-core ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz | 667 MHz | 667 MHz |
| Logic Cells | 275K | 275K | 275K |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -1 | -1 | -1 |
| Debug Support | CoreSight | CoreSight | CoreSight |
| Process Technology | 28 nm | 28 nm | 28 nm |
Bảo phân biệt quan trọng
- Retains the complete Zynq-7000 processing and programmable-logic resource profile (vsXC7Z035-1FFG676C)
- Provides an identified same-family 676-FCBGA option with the same -1 speed grade (vsXC7Z035-1FBG676I)
- Combines a 667 MHz dual-core processor subsystem with 275K Kintex-7 logic cells (vsXC7Z030-1FBG676C)
Ghi chú thiết kế
Start the PCB layout with the AMD 676-FCBGA package information and selected device pinout file rather than a generic BGA outline. Preserve the prescribed land pattern, ball assignments, power and ground connectivity, and decoupling structure. The 27 x 27 mm package contains 676 balls, so escape routing can dominate layer count and via planning. Model the complete stackup and interface fan-out before placement, and verify every net against the exact ordering code because related XC7Z035 suffixes use different package documentation.
Partition the power architecture according to the AMD data sheet before connecting regulators, decoupling, and external components. Analyze processor and FPGA power requirements across operating modes, including configuration, idle, and full activity. Use the documented voltage tolerances and sequencing rules, and place bulk and high-frequency decoupling according to the manufacturer guidance. Confirm that the selected regulators can support the combined dynamic load without violating droop limits during processor or programmable-logic activity.
Evaluate the thermal path from the 676-FCBGA device through the PCB and enclosure before fixing board-layer construction. The Kintex-7 fabric and dual Cortex-A9 subsystem can produce different activity-dependent power profiles, so a single nominal calculation may hide hot operating conditions. Use a power map based on realistic workloads and evaluate copper area, thermal-via distribution, airflow, and adjacent heat sources. Recheck junction-temperature margins after component placement and enclosure testing.
Preserve continuous reference planes beneath high-speed interfaces and route clocks as short, controlled-impedance paths. The Zynq-7000 architecture supports multiple high-speed interfaces, making return-path discontinuities, coupling, and clock jitter potential system-level concerns. Define stackup impedances early, apply the AMD interface and clocking guidance, and avoid routing sensitive signals through areas disturbed by switching nodes or power-supply components. Post-layout timing and channel simulation are required for production confidence.
Do not treat a shared 676-FCBGA outline as sufficient proof that every XC7Z035 ordering code is interchangeable. Compare the complete suffix, speed grade, temperature designation, package drawing, pinout file, configuration method, power rails, and qualification status. Device migration can also affect timing closures and software constraints even when the processor frequency and logic-cell count remain unchanged. Run an engineering change review, recompile the implementation, and repeat hardware validation before releasing a substitute to production.
Thông tin tuân thủ
Compliance status requires confirmation from the current AMD product documentation or declaration for the exact XC7Z035-1FBG676C ordering code.