XC6SLX45-3CSG484I - 43,661 LE Spartan-6 FPGA | Xilinx
MPN: XC6SLX45-3CSG484I ✓ Hoạt độngXC6SLX45-3CSG484I Tóm tắt
A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor in which lookup tables, registers, routing resources, and programmable I/O blocks implement custom logic. Within the device hierarchy, an FPGA belongs to programmable logic devices and combines logic density, parallel processing, configurable interfaces, and deterministic hardware execution. The Spartan-6 LX family targets embedded control, communications, industrial automation, signal processing, and cost-sensitive systems requiring high integration.
The XC6SLX45-3CSG484I provides 6,822 adaptive logic modules and 43,661 logic elements for implementing parallel datapaths, control logic, protocol engines, and state machines. Its 2.04 Mbit of embedded block RAM supports buffers, packet storage, data acquisition, and general-purpose memory functions. The 484-ball CSPBGA package offers 320 I/O according to the device listing, while the -3 speed grade identifies the performance class and the I suffix identifies the industrial temperature grade.
The device uses a 45 nm CMOS process and a 1.2 V nominal core supply. Its 1.14 V to 1.26 V operating range provides the design margin needed for a properly regulated core rail. The 500 MHz internal frequency is not a guarantee that every design will close at that frequency; timing closure depends on architecture, routing, I/O standards, speed grade, tool settings, and board constraints. AMD specifies the complete operating limits and characteristics in the Spartan-6 FPGA data sheet DS162.
Typical uses include industrial controller and sensor-hub designs, industrial networking equipment, high-resolution data-acquisition systems, motor and motion-control platforms, instrument interfaces, and embedded video processing. The combination of programmable logic, dedicated block RAM, and a high pin count permits parallel sensor aggregation, protocol conversion, and real-time filtering without relying on a separate microprocessor for every control task.
PCB implementation requires a precision multilayer layout, local decoupling, careful supply grounding, and complete via-in-pad or fanout planning for the fine-pitch 484-ball package. Designers should also confirm the selected Spartan-6 package pinout file, memory-interface constraints, and I/O voltage requirements before releasing the board layout. Because this package has many balls and dense escape routing, manufacturing capability and assembly-process selection are central design decisions.
This product page combines the key device ratings, verified commercial availability, package and cross-reference details, alternative-part comparisons, and practical implementation guidance. It is intended to help engineers confirm footprint compatibility, assess speed-grade and temperature-grade changes, and plan power, layout, and lifecycle decisions before placing the FPGA into a production design.
Bộ thay thế dễ dàng lắp đặt cho XC6SLX45-3CSG484I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC6SLX45-3CSG484I (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Package, Speed Grade, Adaptive Logic Modules, Device Type.
XC6SLX45-3CSG484C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XA6SLX45-3CSG484I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC6SLX45-2CSG484I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC6SLX45-3FGG484C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XA6SLX45-3CSG484C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC6SLX45-3CSG484I Tỷ lệ tối đa & tính chất điện
| Device Type | Spartan-6 LX Field Programmable Gate Array (FPGA) |
| Logic Elements | 43,661 LE |
| Adaptive Logic Modules | 6,822 ALM |
| Embedded Memory | 2.04 Mbit |
| Internal Frequency | 500 MHz |
| Core Supply Voltage | 1.14 V to 1.26 V |
| Process Technology | 45 nm CMOS |
| Speed Grade | -3 |
| Temperature Grade | Industrial |
| Nhiệt độ hoạt động | -40 °C to 100 °C (TJ) |
| Hộp | 484-ball CSPBGA, 19 mm x 19 mm |
| Terminal Count | 484 terminals |
| Input/Output Count | 320 I/O |
| Kiểu lắp đặt | Surface Mount |
| Lead-Free Status | Lead-free |
| REACH Compliance | Compliant |
Hướng dẫn cấu hình chân XC6SLX45-3CSG484I 484-ball cspbga, 19 mm x 19 mm
Cấu hình chân cho XC6SLX45-3CSG484I (484-ball cspbga, 19 mm x 19 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC6SLX45-3CSG484I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC6SLX45-3CSG484I phù hợp cho 6 Áp dụngs: Industrial Control and Automation, Industrial Networking Gateway, High-Speed Data Acquisition, Motor and Motion Control, Embedded Instrumentation, Parallel Sensor Aggregation.
Industrial Control and Automation
The XC6SLX45-3CSG484I suits industrial controllers that combine parallel logic, real-time control, and multiple communication interfaces. Its 43,661 logic elements can host state machines, motion-control sequencing, and safety interlocks, while 2.04 Mbit of embedded memory supports local buffering and protocol data. The 484-ball package provides 320 I/O for digital sensors, actuator outputs, encoders, and industrial field buses. The -40 °C to 100 °C junction-temperature specification supports equipment intended for industrial environments, although enclosure design must keep the device below its thermal limits.
Được đề xuất
Industrial Networking Gateway
The XC6SLX45-3CSG484I can implement protocol conversion, packet filtering, and parallel data routing in an industrial networking gateway. Its 6,822 adaptive logic modules provide substantial configurable parallelism for Ethernet or field-bus data paths, while the 2.04 Mbit of block RAM can support buffering, packet classification, and descriptor queues. The 320 available I/O leave room for multiple physical interfaces and status signals. A 500 MHz internal clock supports demanding datapaths, although achievable interface rates must be validated through AMD implementation tools and board-level timing analysis.
Được đề xuất
High-Speed Data Acquisition
The XC6SLX45-3CSG484I is appropriate for parallel data-acquisition systems requiring deterministic sampling, digital filtering, and programmable trigger logic. Its 43,661 logic elements can accommodate wide parallel processing pipelines, and its 2.04 Mbit of embedded memory can buffer batches of samples between acquisition and transfer stages. The 484-ball package offers 320 I/O for converters, clocks, triggers, and parallel data buses. Designers should use the -3 speed grade when timing margins are tight and verify converter capture timing, input thresholds, and clock jitter rather than assuming the 500 MHz internal frequency determines sampling bandwidth.
Được đề xuất
Motor and Motion Control
The XC6SLX45-3CSG484I can serve as the programmable control core in a motor-drive or motion-control system. Parallel logic resources are useful for encoder decoding, current-loop control, PWM generation, fault handling, and deterministic sequencing, while the large I/O count accommodates control signals and multiple position interfaces. The 1.14 V to 1.26 V core range demands a stable low-noise supply, and the -3 grade provides additional timing margin over the -2 option. The design must still include suitable external gate drivers, isolation, current sensing, protection, and thermal management for the power stage.
Được đề xuất
Embedded Instrumentation
The XC6SLX45-3CSG484I supports programmable instrument front ends that combine calibration, digital filtering, control sequencing, and communication. Its embedded memory can hold calibration tables, samples, and status records, while the large programmable logic fabric can implement fixed-function signal processing and timing control. The 484-ball CSPBGA provides enough physical connections for analog-to-digital converter inputs, digital buses, displays, and service interfaces. For precise measurements, use the -3 speed grade and validate every analog front end independently; FPGA logic can process sampled information but cannot remove converter noise, reference error, or analog-layout limitations.
Được đề xuất
Parallel Sensor Aggregation
The XC6SLX45-3CSG484I is well suited to systems combining numerous digital sensors with local computation and a high-speed uplink. Its 43,661 logic elements can consolidate multiple sensor streams, perform thresholding and filtering, and format data for transmission, while 2.04 Mbit of embedded memory provides short-term buffering. With 320 I/O listed for the device, the package can accommodate numerous parallel sensor inputs and control outputs. Practical deployments should include input conditioning, isolation where required, clock-domain planning, and error checking so a faulty sensor cannot corrupt the combined data stream.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC6SLX45-3CSG484I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC6SLX45-3CSG484C | XA6SLX45-3CSG484I | XC6SLX45-2CSG484I | XC6SLX45-3FGG484C | XA6SLX45-3CSG484C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | AMD | Xilinx | Xilinx | AMD |
| Package | 484-ball CSPBGA | 484-ball CSPBGA | 484-ball CSPBGA | 484-ball CSPBGA | 484-ball FBGA | 484-ball CSPBGA |
| Device Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Elements | 43,661 LE | 43,661 LE | 43,661 LE | 43,661 LE | 43,661 LE | 43,661 LE |
| Adaptive Logic Modules | 6,822 ALM | 6,822 ALM | 6,822 ALM | 6,822 ALM | 6,822 ALM | 6,822 ALM |
| Embedded Memory | 2.04 Mbit | 2.04 Mbit | 2.04 Mbit | 2.04 Mbit | 2.04 Mbit | 2.04 Mbit |
| Speed Grade | -3 | -3 | -3 | -2 | -3 | -3 |
| Temperature Grade | Industrial, -40 °C to 100 °C (TJ) | Commercial | Industrial | Industrial | Commercial | Commercial |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Core Supply Voltage | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V |
Bảo phân biệt quan trọng
- Industrial-temperature selection within the Spartan-6 LX family (vsXC6SLX45-3CSG484C)
- Higher performance grade than the -2 alternative (vsXC6SLX45-2CSG484I)
- Same device capacity and core voltage as the functional equivalent (vsXA6SLX45-3CSG484I)
Ghi chú thiết kế
Treat the CSG484 land pattern as a high-density fanout and escape-routing problem. Assign all power, ground, configuration, clock, and user I/O balls directly from the AMD package pinout file, then confirm the board's microvia and via-in-pad capability against the selected assembly process. Preserve continuous ground-reference planes beneath the device and route sensitive clock inputs away from high-current switching nodes. Do not infer ball functions from a generic 484-ball package drawing.
Design the 1.14 V to 1.26 V core rail for the device's full operating condition rather than a nominal 1.2 V point. Place local decoupling at the device's supply balls, use multiple power and ground connections where the package permits, and keep sensitive returns short and continuous. Follow the power-supply sequencing and ramp requirements in AMD data sheet DS162. Confirm steady-state and transient current through the implementation flow because the available listing does not provide a complete power table.
Use the -40 °C to 100 °C junction-temperature range as a device limit, not an enclosure specification. Estimate board-level junction temperature from ambient temperature, package dissipation, and the PCB's actual thermal path. The 19 mm by 19 mm CSPBGA benefits from a multilayer board with uninterrupted copper around the device, but the final thermal result depends on copper area, via construction, airflow, and neighboring heat sources. Validate the worst-case corner of the operating environment.
Avoid treating the 500 MHz internal clock as a guaranteed system clock. Logic depth, routing congestion, I/O timing, clock skew, and tool directives determine the actual design frequency. Review timing at the intended speed grade, include board-level clock uncertainty, and confirm all external interface timing against the pinout and electrical characteristics in DS162. Also verify that an alternative MPN retains the same power balls, configuration pins, and user I/O assignments before reusing a PCB.
Thông tin tuân thủ
The package listing identifies the exact device as lead-free, and the product catalog identifies the XC6SLX45-3CSG484I as REACH compliant. No exact RoHS, halogen-free, conflict-minerals, or automotive qualification statement was confirmed for the target suffix.
