XC7A75T-L1CSG324I - 28nm Artix-7 75,520-LC FPGA | AMD
MPN: XC7A75T-L1CSG324I ✓ Hoạt độngXC7A75T-L1CSG324I Tóm tắt
An FPGA is a programmable semiconductor containing configurable logic blocks, block RAM, programmable I/O, and dedicated digital signal processing resources. Artix-7 devices occupy the middle of the AMD product hierarchy between small Spartan-6 devices and larger Virtex-7 devices, providing a balance of logic density, signal-processing capability, and cost for industrial, communications, instrumentation, and embedded control systems.
Key resources include 75,520 logic cells, 3.8 MB of block RAM, dedicated DSP slices, and approximately 210 user I/O. The 324-ball CSBGA package supports dense board-level integration while keeping the device within the CSG324 family footprint. Programming is handled through the AMD FPGA programming toolchain, and configuration data can be loaded from serial flash or another supported configuration source.
The 28 nm Artix-7 architecture combines programmable logic, dedicated block RAM, digital signal processing slices, and high-speed serial transceiver resources in devices intended for high performance per watt. The L1 voltage option supports systems where core power is a primary thermal constraint, but the complete design must still account for I/O rail power, configuration current, and the operating-power profile of the selected design.
Typical uses include industrial automation, motor and motion control, sensor acquisition, communications infrastructure, embedded vision, and test-and-measurement systems. The FPGA is particularly useful where parallel data acquisition, deterministic control, hardware timing, and post-deployment logic updates must be combined in one device.
When planning the PCB, follow the AMD CSG324 package pinout files and UG475 for ball assignment, power rails, configuration pins, and high-speed layout. Provide the required decoupling, preserve the specified power-up sequence, and keep configuration signals away from noisy analog or high-current switching nodes.
This page organizes package, resource, replacement, and design information for engineers evaluating the XC7A75T-L1CSG324I. It also identifies same-footprint Artix-7 options and distinguishes speed-grade, voltage-grade, and temperature-grade changes that affect firmware, timing, and thermal qualification.
Bộ thay thế dễ dàng lắp đặt cho XC7A75T-L1CSG324I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7A75T-L1CSG324I (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Mounting Type, Device Type, Temperature Grade.
XC7A75T-1CSG324I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A75T-2CSG324I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A75T-1CSG324C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7A75T-L1CSG324C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7A75T-2CSG324C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7A75T-L1CSG324I Tỷ lệ tối đa & tính chất điện
| Device Type | Artix-7 FPGA |
| Logic Cells | 75,520 cells |
| Process Technology | 28 nm CMOS |
| Core Voltage | 0.95 V |
| User I/O | Approximately 210 I/O |
| Block RAM | 3.8 MB |
| DSP Resources | Dedicated DSP slices |
| Hộp | 324-ball CSBGA (CSG324) |
| Số chân | 324 balls |
| Kiểu lắp đặt | Surface Mount |
| Shipping Container | Tray |
| Family | Artix-7 |
| Device Designation | XC7A75T |
| Speed Grade | L1 low-power grade |
| Temperature Grade | Industrial grade (-40C to +100C) |
| RoHS Compliance | Unknown |
| Lead-Free Construction | Pb-free available |
Hướng dẫn cấu hình chân XC7A75T-L1CSG324I 324-ball csbga (csg324)
Cấu hình chân cho XC7A75T-L1CSG324I (324-ball csbga (csg324) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7A75T-L1CSG324I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7A75T-L1CSG324I phù hợp cho 6 Áp dụngs: Industrial PLC and Automation Controller, Motor Control and Power Conversion, Communications Protocol Processing, Data Acquisition and Test Instrumentation, Embedded Vision and Image Preprocessing, Aerospace and High-Reliability Control Systems.
Industrial PLC and Automation Controller
The XC7A75T-L1CSG324I fits programmable logic controllers because its 75,520 logic cells and approximately 210 user I/O support parallel digital modules without requiring a separate processor for every function. The 3.8 MB of block RAM can hold protocol state, motion tables, and diagnostic history, while the 0.95 V L1 core option supports a power-conscious industrial control platform. Implement the control cycle and communication interfaces in the FPGA while using the AMD package files to assign the CSG324 power, configuration, and I/O balls correctly.
Được đề xuất
Motor Control and Power Conversion
The Artix-7 architecture of the XC7A75T-L1CSG324I is appropriate for deterministic motor-control loops where PWM generation, current sampling, and protection logic must operate with predictable timing. Dedicated DSP slices assist with transforms and filtering, while 75,520 logic cells allow parallel control channels and supervisory logic. The L1 grade's 0.95 V core option can assist power reduction, although the complete board must also account for I/O drive power, isolated power rails, and the switching environment around the controller.
Được đề xuất
Communications Protocol Processing
The XC7A75T-L1CSG324I can implement low-latency packet handling, framing, and interface conversion because 75,520 logic cells support parallel datapaths and 3.8 MB of block RAM accommodates packet buffering. Programmable I/O allows the design to meet specific interface timing instead of relying on a fixed internal bus architecture. Serial transceiver availability and usable signal counts must be checked for the exact CSG324 configuration, particularly when the design requires high-speed links or clock-domain crossing.
Được đề xuất
Data Acquisition and Test Instrumentation
The XC7A75T-L1CSG324I is well suited to deterministic data-acquisition systems because approximately 210 user I/O can support parallel sensor, trigger, and status connections. Its 75,520 logic cells provide parallel filters, counters, and trigger logic, while 3.8 MB of block RAM supports capture buffers and rolling analysis windows. The 0.95 V L1 option can reduce FPGA core power, but the instrumentation designer must still budget analog front-end power, calibration structures, and thermal rise around the CSG324 device.
Được đề xuất
Embedded Vision and Image Preprocessing
The XC7A75T-L1CSG324I can support early-stage embedded vision processing such as pixel formatting, threshold detection, line finding, or region reduction before a host processor receives the result. Its dedicated DSP slices accelerate multiply-accumulate operations, and 3.8 MB of block RAM can support line stores and short image buffers. The implementation is most effective when the image algorithm is deterministic and low latency; camera interface timing, memory bandwidth, and external memory requirements must be evaluated in the complete system.
Được đề xuất
Aerospace and High-Reliability Control Systems
The XC7A75T-L1CSG324I can serve as a programmable control component in aerospace, instrumentation, and radiation-tolerant system development where deterministic logic and multiple I/O paths are valuable. The industrial-grade L1 ordering configuration should be replaced or supplemented by an explicitly qualified ordering code when the system requires a specific aerospace reliability program. Confirm the applicable temperature range, radiation pedigree, screening process, and package qualification before using this MPN in a flight-critical design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7A75T-L1CSG324I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7A75T-1CSG324I | XC7A75T-2CSG324I | XC7A75T-1CSG324C | XC7A75T-L1CSG324C | XC7A75T-2CSG324C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-ball CSBGA (CSG324) | 324-ball CSBGA (CSG324) - same | 324-ball CSBGA (CSG324) - same | 324-ball CSBGA (CSG324) - same | 324-ball CSBGA (CSG324) - same | 324-ball CSBGA (CSG324) - same |
| Logic Cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells |
| Process Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
| Speed Grade | L1 | -1 standard speed grade | -2 speed grade | -1 standard speed grade | L1 | -2 speed grade |
| Temperature Grade | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Commercial | Commercial | Commercial |
| Block RAM | 3.8 MB | 3.8 MB | 3.8 MB | 3.8 MB | 3.8 MB | 3.8 MB |
| User I/O | Approximately 210 I/O | Approximately 210 I/O | Approximately 210 I/O | Approximately 210 I/O | Approximately 210 I/O | Approximately 210 I/O |
| Shipping Container | Tray | Tray | Tray | Tray | Tray | Tray |
Bảo phân biệt quan trọng
- Lower core-voltage option within the Artix-7 CSG324 family (vsXC7A75T-1CSG324I)
- Same-footprint industrial-grade alternatives preserve PCB investment (vsXC7A75T-1CSG324C)
- Substantial programmable logic and memory for embedded control (vsXC7A75T-2CSG324C)
- Industrial qualification with a low-voltage core option (vsXC7A75T-L1CSG324C)
Ghi chú thiết kế
Use the AMD power estimator with the actual Artix-7 utilization and I/O activity rather than applying a catalog power figure to the board. The L1 option operates from a 0.95 V core, but total power also includes I/O banks, configuration logic, auxiliary rails, and external memory. Separate clean supply paths for core and I/O rails, follow the permitted sequencing requirements, and verify the assembled board temperature under worst-case traffic rather than only at idle.
Lay out the CSG324 footprint from the official AMD package drawing and use the Artix-7 package device pinout files for every ball assignment. Place decoupling capacitors at the device-side power vias, provide adequate via current capacity for core and I/O current transients, and route configuration signals away from high-speed or switching nets. The 324-ball BGA also requires careful assembly-process control, including paste volume, reflow profile, and inspection for bridging.
Do not treat a same-package Artix-7 suffix change as an automatic substitution. The L1, -1, and -2 designations affect timing and power behavior, while the C and I suffixes change the temperature qualification. A candidate replacement should pass static timing analysis, resource equivalence, configuration compatibility, thermal review, and any required reliability screening. Also confirm that the selected design does not require CSG324 features that are unavailable on the replacement grade.
Constrain configuration, clock, and high-speed interface paths according to the AMD Artix-7 design guidance and the electrical characteristics of the selected I/O standard. Keep input clocks away from switching-node fields, use matched routing where source-synchronous interfaces are used, and validate external memory timing with realistic timing constraints. Board-level SI validation should cover the assembled PCB because BGA breakout, via stubs, and return-path discontinuities can materially affect margin.
Thông tin tuân thủ
The device documentation states that packages are available in Pb-free and selected Pb options. RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified in the indexed documentation.