AMD

XC7K160T-1FBG676I - 162K-Logic Kintex-7 FPGA | AMD

MPN: XC7K160T-1FBG676I ✓ Hoạt động
970 mV to 1.03 V Vdss 676-BBGA, FCBGA Package -1 Speed 11.43 Mbit Memory
MOQ: 1 |

XC7K160T-1FBG676I Tóm tắt

The AMD XC7K160T-1FBG676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 I/O, 28 nm fabrication technology, and a 676-ball FCBGA package. It belongs to the Kintex-7 FPGA family, a programmable-logic hierarchy that combines configurable logic blocks, block RAM, DSP resources, programmable I/O, clocking, and high-speed serial transceivers on one semiconductor device.

A field-programmable gate array is a digital integrated circuit whose interconnections and processing functions are configured after manufacture. FPGA design tools translate RTL, constraints, and block-level descriptions into a configuration bitstream. Once loaded into the XC7K160T, this configurable logic can implement processors, control systems, protocol bridges, data-processing pipelines, and other digital functions without changing the physical circuit board. The Kintex-7 family provides more compute density than smaller FPGA families and is positioned for high-performance signal processing, networking, communications, and industrial systems.

The XC7K160T-1FBG676I provides 162,240 logic elements and 400 user I/O. Listings identify 25,350 ALM and 11.43 Mbit of embedded memory, while the device also includes dedicated DSP resources and high-speed transceivers. Its -1 speed grade targets performance below the -2 and -3 grades, while the industrial suffix supports an operating range of -40°C to +100°C. Core and I/O power rails cover approximately 0.97 V to 1.03 V for the core and 1.2 V to 3.3 V across the listed operating supply range.

The architecture supports parallel programmable logic, distributed memory, dedicated block RAM, DSP arithmetic, clock-management resources, and serial transceivers. This combination allows a single Kintex-7 implementation to consolidate functions that might otherwise require an FPGA, a processor, and external interface devices. The -1 grade is appropriate when a design requires a large amount of parallel logic but does not require the timing margin of a faster speed grade. Bitstream configuration, clocking, power sequencing, and transceiver operation must follow the Kintex-7 design guidance in DS182.

Typical uses include industrial Ethernet interfaces, 10-gigabit Ethernet signal processing, PCIe Gen3 endpoint or root-port designs, network packet processing, radar and test-equipment front ends, high-speed data acquisition, and embedded control systems with substantial parallel processing. The 400-I/O count also supports board-level integration of memories, transceivers, clocks, sensors, and high-speed board interfaces when the electrical and pin-count constraints of the FCBGA-676 package are satisfied.

The 676-ball FCBGA package demands careful PCB design, including controlled impedance routing, dense via arrays, adequate power-plane connectivity, and thermal management beneath the device. Designers should use the complete pinout, recommended decoupling network, and package-specific land pattern from DS182 rather than relying on generic BGA guidance. Configuration, clock, serial-transceiver, and JTAG signals should be validated for signal integrity before a production layout is released.

This product record combines the Kintex-7 architecture, FCBGA-676 package characteristics, temperature and speed-grade distinctions, package-compatible alternatives, and practical PCB guidance. It supports direct part selection when the design needs 162,240 logic cells, 400 I/O, and the -1 industrial-grade Kintex-7 configuration in one 676-ball package.

Bộ thay thế dễ dàng lắp đặt cho XC7K160T-1FBG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7K160T-1FBG676I (cùng hình factor và footprint) — khác nhau ở Device Type, Package, Process Technology, Speed Grade, Logic Cells.

AMD
Device Type: Kintex-7 FPGA
Package: 676-BBGA FCBGA
So sánh với XC7K160T-1FBG676I →
AMD
Device Type: Field Programmable Gate Array (FPGA)
Package: 676-ball FCBGA
Process Technology: 28 nm CMOS
So sánh với XC7K160T-1FBG676I →
AMD
Device Type: Kintex-7 Field Programmable Gate Array (FPGA)
Package: 676-BBGA FCBGA (FBG676)
Speed Grade: -2
So sánh với XC7K160T-1FBG676I →

XC7K160T-1FBG676C

✅ Drop-In
AMD
📦 676-BBGA, FCBGA
Field Programmable Gate Array (FPGA) · Kintex-7 · 162,240 cells · 28 nm CMOS · -1 · 1 V · +85 °C · 676-ball FCBGA

Liên hệ để biết giá

Xem tài liệu →

XC7K160T-1FB676I

✅ Drop-In
AMD
📦 676-BBGA, FCBGA
Kintex-7 FPGA · 162,240 cells · 400 I/O · 28 nm · 1 V · 676-BBGA FCBGA · 676 balls · -1

Liên hệ để biết giá

Xem tài liệu →

XC7K160T-2FBG676I

✅ Drop-In
📦 676-BBGA, FCBGA
Thông số tương thích

Liên hệ để biết giá

XC7K160T-2FBG676C

✅ Drop-In ⚠️ Thông số chưa được xác minh
AMD
📦 676-BBGA, FCBGA
Kintex-7 Field Programmable Gate Array (FPGA) · 162,240 cells · 400 I/O · 11,700 Kb · Kintex-7 · -2 · 676-BBGA FCBGA (FBG676) · 676 balls

Liên hệ để biết giá

Xem tài liệu →

XC7K160T-3FBG676I

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 676-BBGA, FCBGA
Same FBG676 package and industrial grade; -3 speed grade replaces -1, materially changing timing margin and power behavior.

📋 Tham chiếu thay thế (không có trong danh mục)

XC7K160T-1FBG676I Tỷ lệ tối đa & tính chất điện

Device Type Kintex-7 Field-Programmable Gate Array (FPGA)
Logic Elements 162,240 LE
Adaptive Logic Modules 25,350 ALM
User I/O Count 400 I/O
Embedded Memory 11.43 Mbit
Process Technology 28 nm
Core Voltage 970 mV to 1.03 V
Điện áp cung cấp hoạt động 1.2 V to 3.3 V
Speed Grade -1
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
Hộp 676-BBGA, FCBGA
Kiểu lắp đặt Surface Mount
Series Kintex-7

Hướng dẫn cấu hình chân XC7K160T-1FBG676I 676-bbga, fcbga

Cấu hình chân cho XC7K160T-1FBG676I (676-bbga, fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 676-bbga, fcbga cho XC7K160T-1FBG676I

Không có dữ liệu chân cụ thể sẵn có cho XC7K160T-1FBG676I.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

XC7K160T-1FBG676I phù hợp cho 6 Áp dụngs: Industrial Ethernet Packet Processing, PCIe Gen3 Endpoint Equipment, 10-Gigabit Ethernet Interface, Radar and High-Speed Test Equipment, High-Speed Data Acquisition, Embedded Control and Instrumentation.

🏭

Industrial Ethernet Packet Processing

The XC7K160T-1FBG676I fits industrial Ethernet equipment that must process frames, maintain protocol state, and exchange data with multiple external interfaces. Its 162,240 logic cells, 400 user I/O, and 11.43 Mbit embedded memory allow parallel packet classification, buffering, and control functions to be consolidated in one FPGA. The -40°C to +100°C operating range is appropriate for factory-floor equipment that must operate beyond commercial temperatures. Designers should use the Kintex-7 transceiver and clocking guidance in DS182 when implementing high-speed interfaces, and they should reserve time for timing closure at the -1 speed grade.

🖥️

PCIe Gen3 Endpoint Equipment

The XC7K160T-1FBG676I is well suited to PCIe Gen3 endpoint and data-plane designs because the Kintex-7 family combines high-speed serial transceivers with a large programmable-logic fabric. Engineers can implement transaction layers, DMA engines, data movement, and control functions in parallel instead of relying on a fixed processor architecture. The device's 400 I/O provide substantial integration capacity for local memories, status interfaces, clocks, and test points. A successful design must follow the applicable PCIe reference design, confirm transceiver pin assignments from the package table, and verify power sequencing and signal integrity under the required industrial temperature range.

🌐

10-Gigabit Ethernet Interface

The XC7K160T-1FBG676I can serve as the programmable engine behind a 10-gigabit Ethernet interface by combining serial transceiver resources, parallel packet logic, DSP blocks, and embedded memory. The 162,240-cell fabric provides room for framing, search, classification, aggregation, and monitoring functions, while 400 I/O support ancillary interfaces. Kintex-7 devices are identified as supporting 10-gigabit Ethernet solutions, but implementation quality depends on reference-clock selection, transceiver configuration, equalization, packet-memory bandwidth, and timing closure. Use the manufacturer transceiver and clock-management guidance rather than approximating the high-speed interface constraints.

✈️

Radar and High-Speed Test Equipment

The XC7K160T-1FBG676I supports radar, instrumentation, and high-speed test systems that require parallel sampling, digital filtering, correlation, and real-time data movement. Its 25,350 ALM and 11.43 Mbit embedded memory allow multiple parallel pipelines to operate concurrently, while DSP resources accelerate fixed-point and floating-point processing commonly used in signal conditioning. The -1 speed grade provides a defined timing target for the design, and industrial temperature support is useful in equipment deployed outside controlled environments. Engineers should budget for BGA thermal management, split power rails, and high-speed memory routing.

⚡

High-Speed Data Acquisition

The XC7K160T-1FBG676I is appropriate for high-speed data-acquisition systems that must ingest multiple channels and perform filtering, triggering, decimation, and buffering in real time. The FPGA's 400 I/O, programmable logic, DSP capability, and embedded memory support parallel channel processing without relying on a general-purpose processor for every operation. Kintex-7 high-speed transceivers can also support board-to-board or chip-to-chip links when the pinout and reference-design requirements are satisfied. Practical implementations should use short matched routes for high-speed inputs, independent power filtering for each voltage group, and careful thermal analysis of the 676-ball FCBGA.

🔧

Embedded Control and Instrumentation

The XC7K160T-1FBG676I can implement deterministic embedded control, sequencing, signal conditioning, and communications in industrial instrumentation. Its large logic fabric allows multiple control domains and diagnostic functions to operate concurrently, while the extensive I/O count simplifies connections to sensors, actuators, memory, and display or communication peripherals. The -40°C to +100°C range supports demanding industrial installations. Designers should partition real-time functions, add watchdog and fail-safe mechanisms, and validate clock-domain crossings. The package's high pin count also means that manufacturing escape routing, inspection, and assembly capability must be confirmed before committing to the design.

What are the key specifications of XC7K160T-1FBG676I that engineers should know?
The XC7K160T-1FBG676I is a 28 nm Kintex-7 FPGA with 162,240 logic cells, 400 user I/O, 25,350 ALM, and 11.43 Mbit of embedded memory in a 676-ball FCBGA package. According to DS182 (v2.16), the Kintex-7 family supports programmable logic, block RAM, DSP, clock management, and high-speed serial transceivers. This particular device uses the -1 speed grade and is identified for operation from -40°C to +100°C, making it suitable for industrial designs that require substantial parallel processing and extensive board-level connectivity.
Where can I download the XC7K160T-1FBG676I datasheet PDF?
The XC7K160T-1FBG676I datasheet is available through the XC7K160T documentation page linked on this product page and through the manufacturer document identified as DS182 (v2.16), dated May 8, 2017. The document contains the device resource tables, DC and AC switching characteristics, package information, pinout, and configuration guidance. Use the complete manufacturer datasheet when assigning balls, selecting power rails, or validating the FCBGA-676 land pattern and high-speed interfaces.
What is the XC7K160T-1FBG676I package and pin count?
The XC7K160T-1FBG676I uses a 676-ball FCBGA package with surface-mount assembly. Its package includes 400 user I/O as well as dedicated configuration, clock, power, ground, and other fixed-function balls. Because a BGA ball map cannot be reconstructed accurately from general device descriptions, use the package pin table in DS182 (v2.16) for every net assignment. The exact ball coordinates, power-sequence requirements, and recommended PCB footprint should be taken directly from that manufacturer table.
Where can I find the XC7K160T-1FBG676I pinout and PCB footprint?
The authoritative XC7K160T-1FBG676I pinout and PCB footprint appear in DS182 (v2.16), the Kintex-7 FPGAs Data Sheet published by Xilinx. Look for the FBG676 package pin table, the package drawings, and the recommended land-pattern guidance. Use the manufacturer table when assigning power, ground, configuration, clock, JTAG, transceiver, and user I/O balls; a generic FCBGA-676 drawing may not include all device-specific functions or power-ball groupings.
Where to buy XC7K160T-1FBG676I online?
Use the Request a Quote form on this page to request availability and sourcing for the exact XC7K160T-1FBG676I ordering code. The form should be submitted with the required quantity, target package handling, delivery location, and production schedule. Because the suffix identifies the FCBGA-676 package, -1 speed grade, and industrial temperature range, engineers should request the exact MPN rather than accepting a generic Kintex-7 160T device with different package or grade codes.
What is the price of XC7K160T-1FBG676I?
The current commercial price for the XC7K160T-1FBG676I should be requested through the Request a Quote form on this page. Pricing for this FPGA can vary with quantity, inventory, and assembly requirements, so a static figure may not reflect the quantity you need. Include your production volume, target delivery date, and packaging requirements in the request to obtain a relevant quotation for the exact 676-ball, -1-grade ordering code.
What is the lead time for XC7K160T-1FBG676I?
The current lead time for XC7K160T-1FBG676I should be confirmed through the Request a Quote form on this page. Lead time can depend on available inventory, production planning, package handling, and the quantity required. For an industrial program, provide the requested delivery date and annual usage so sourcing can establish whether stock allocation or scheduled production is the appropriate route.
Is XC7K160T-1FBG676I in stock?
Use the Request a Quote form on this page to check availability for the exact XC7K160T-1FBG676I. The MPN includes important device identifiers: Kintex-7 160T logic density, FBG676 packaging, the -1 speed grade, and the industrial temperature suffix. A stock response for a different suffix may not satisfy the electrical, temperature, or package requirements of the target design.
XC7K160T-1FBG676I vs XC7K160T-1FBG676C - which is better for industrial use?
The XC7K160T-1FBG676I is the better choice for industrial environments because it is identified for -40°C to +100°C operation, while the XC7K160T-1FBG676C has a commercial temperature range of 0°C to +85°C. Both retain the same Kintex-7 160T resources, -1 speed grade, and FBG676 package according to the family and cross-reference documentation. The I suffix therefore adds 15°C of upper-temperature capability over the C variant.
Can XC7K160T-2FBG676I replace XC7K160T-1FBG676I?
The XC7K160T-2FBG676I is a package-compatible replacement candidate because it uses the same FBG676 package and Kintex-7 160T device architecture, but it changes from the -1 to the -2 speed grade. That change can affect timing, power characteristics, qualification constraints, and bitstream performance. Existing engineering should confirm timing margins and thermal behavior before substituting it. The XC7K160T-1FBG676I remains the closer functional match when the original -1 grade is required.
When should I choose XC7K160T-1FBG676I over XC7K160T-2FBG676I?
Choose XC7K160T-1FBG676I when the design has already been implemented and verified for the -1 speed grade, the industrial temperature range is required, or changing speed grade could affect timing closure and power behavior. Choose the XC7K160T-2FBG676I only when its faster performance is needed and the complete design has been retimed and requalified. Both use the Kintex-7 160T architecture and the 676-ball FBG package, so the decision is principally performance, timing margin, and thermal qualification.
Is XC7K160T-1FBG676I suitable for industrial Ethernet and PCIe designs?
The XC7K160T-1FBG676I is suitable for industrial Ethernet and PCIe designs requiring substantial parallel logic, DSP resources, memory, and high-speed serial transceivers. Its -40°C to +100°C industrial temperature range supports applications beyond the commercial range of XC7K160T-1FBG676C. According to the Kintex-7 family documentation, the family supports PCIe Gen3 and 10-gigabit Ethernet solutions, although the final interface configuration must be implemented and validated using the appropriate AMD reference designs and device constraints.
What can replace XC7K160T-1FBG676I without changing the PCB?
The XC7K160T-1FBG676C is the closest package-compatible alternative because it retains the Kintex-7 160T resources, -1 speed grade, and FBG676 package, with the principal change being commercial versus industrial temperature rating. Other same-package speed-grade variants can fit the mechanical footprint, but they alter timing and performance characteristics. Before replacing the target, compare the complete suffix, operating-temperature requirements, timing constraints, transceiver configuration, power design, and qualification records.
Is XC7K160T-1FBG676I the same as XC7K160T-1FFG676I?
No. The XC7K160T-1FBG676I uses the FBG676 package, while the XC7K160T-1FFG676I is identified with the FFG676 package. Although both are 676-ball Kintex-7 160T devices with similar logic resources, a different package code can change the ball map, terminal arrangement, thermal characteristics, and PCB footprint. Treat XC7K160T-1FFG676I as a functional family relative rather than a guaranteed drop-in replacement for the FBG676 target.
What is the best AMD equivalent for XC7K160T-1FBG676I?
The best same-manufacturer functional alternative depends on whether the priority is an exact speed-grade match, industrial temperature capability, or improved performance. XC7K160T-1FBG676C preserves the -1 grade and FBG676 package but is limited to the commercial temperature range; XC7K160T-2FBG676I preserves the package and industrial grade but changes speed performance. The closest functional match is XC7K160T-1FBG676C when the target temperature range is not required. Each substitution still requires timing, power, and footprint review.

Dữ liệu tham khảo kỹ thuật cho XC7K160T-1FBG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose XC7K160T-1FBG676I when the design requires the Kintex-7 160T fabric, 400 user I/O, the -1 speed grade, and industrial-temperature operation from -40°C to +100°C. XC7K160T-1FBG676C is the closest functional alternative when commercial temperature limits are acceptable; it preserves the principal speed and resource configuration but cannot replace the target in a design specified above +85°C. XC7K160T-2FBG676I retains the package and industrial rating but changes to the -2 speed grade, which can improve timing margin while changing power and qualification requirements. XC7K160T-1FB676I may fit the same device family and ball count, but its package drawing must be checked because its ordering code differs from FBG676. Avoid XC7K160T-1FFG676I as an assumed drop-in choice because FFG676 and FBG676 are distinct package identifiers. For every substitution, verify the exact suffix, package drawing, timing constraints, power profile, temperature requirement, and qualification conditions.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này XC7K160T-1FBG676C XC7K160T-1FB676I XC7K160T-2FBG676I XC7K160T-2FBG676C XC7K160T-3FBG676I
Brand AMD AMD AMD AMD AMD AMD
Package 676-BBGA, FCBGA 676-BBGA, FCBGA - same 676-BBGA, FCBGA - package code requires drawing check 676-BBGA, FCBGA - same 676-BBGA, FCBGA - same 676-BBGA, FCBGA - same
Series Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Speed Grade -1 -1 -1 -2 -2 -3
Temperature Grade Industrial, -40°C to +100°C Commercial, 0°C to +85°C Industrial, -40°C to +100°C Industrial, -40°C to +100°C Commercial, 0°C to +85°C Industrial, -40°C to +100°C

Bảo phân biệt quan trọng

  • Retains the full industrial temperature range within the same FBG676 package family (vsXC7K160T-1FBG676C)
  • Provides the specified -1 performance grade without changing the speed class (vsXC7K160T-2FBG676I)
  • Combines 162,240 logic cells with 400 user I/O in the target FBG676 package (vsXC7K160T-1FFG676I)
  • Matches the -1 industrial resource configuration without a commercial temperature downgrade (vsXC7K160T-2FBG676C)

Ghi chú thiết kế

Treat the 676-ball FCBGA as a major thermal-design component. Place the device over a continuous ground plane with a dense via array and apply the package-specific land pattern from DS182 (v2.16). Use the manufacturer's power-dissipation and thermal characterization data for worst-case activity and temperature rather than assuming the logic-cell count alone determines junction temperature. Validate with power-plane current measurements and thermal simulation before production because high-speed I/O, transceivers, and dynamic logic can materially change device heating.

Use the complete XC7K160T FBG676 ball map and recommended footprint rather than a generic 676-BBGA drawing. Separate the core, I/O, auxiliary, and transceiver supplies exactly as directed in the manufacturer power guide, and place the required bulk and high-frequency decoupling capacitors near their associated supply balls. Pay particular attention to the exposed thermal ball area and ground-via connectivity, because a mechanically correct footprint can still produce inadequate thermal performance if the central balls are poorly connected.

Route high-speed serial and differential interfaces as controlled-impedance, length-matched structures referenced to a continuous ground plane. Avoid plane splits beneath high-speed pairs, minimize stubs and unnecessary vias, and apply the transceiver reference-clock and package-routing guidance from the Kintex-7 documentation. Validate inter-pair skew, insertion loss, return loss, and jitter with the actual board stackup and connector or package-loading assumptions rather than relying only on schematic connectivity.

Follow the prescribed power-on and power-off sequence for every supply rail and use independent filtering where the design guidance separates the core and I/O rails. Estimate regulator headroom and transient current from the actual switching activity and selected I/O standard, then confirm that the power source, inductors, capacitors, and plane geometry remain stable at the -1 speed grade. A speed-grade change to -2 or -3 can alter dynamic power and timing, so it should not be treated as a transparent electrical substitution.

Do not interpret a shared 676-ball count as proof that every Kintex-7 package suffix has an identical ball map. XC7K160T-1FFG676I uses a different package identifier from XC7K160T-1FBG676I, so it must not be treated as a drop-in replacement without checking the package drawings. Similarly, changing the temperature suffix or speed grade can affect qualification, timing closure, power, and thermal design. Compare every suffix position before approving a substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The commercial-grade FBG676 ordering code indicates a lead-free package identifier, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified for the exact MPN. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified analog or mixed-signal component.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

xc7k160t 1fbg676i xc7k160t 1fbg676c xc7k160t 2ffg676i xc7k160t 1ffg676i xc7k160t 2fbg484i xc7k160t 2fbg676i xc7k160t ffg676 xc7k160t 2fbg676c xc7k160t datasheet xc7k160t 2fbg484c XC7K160T-1FBG676I datasheet pdf XC7K160T-1FBG676I pinout XC7K160T-1FBG676I replacement XC7K160T-1FBG676I vs XC7K160T-1FBG676C AMD XC7K160T-1FBG676I

Các bộ phận và thuật ngữ liên quan

AMD Xilinx XC7K160T-1FBG676I XC7K160T-1FBG676C XC7K160T-1FB676I XC7K160T-2FBG676I XC7K160T-2FBG676C XC7K160T-3FBG676I XC7K160T-1FFG676I Kintex-7 FPGA field-programmable gate array programmable logic logic cell Adaptive Logic Module block RAM DSP slice high-speed transceiver FCBGA-676 BGA package surface-mount semiconductor 28 nm process technology industrial temperature grade PCIe Gen3 10-gigabit Ethernet DS182
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ