XC7K325T-L2FFG676I - 326K Logic Cell Kintex-7 FPGA | AMD
MPN: XC7K325T-L2FFG676I ✓ Hoạt độngXC7K325T-L2FFG676I Tóm tắt
An FPGA is a semiconductor whose digital logic, interconnect, memory, and dedicated processing resources are configured after manufacture. Within the product hierarchy, the XC7K325T is a Kintex-7 FPGA, a programmable-logic device within the broader FPGA and semiconductor categories. This device balances general-purpose logic capacity with dedicated DSP, clock-management, memory, and high-speed I/O resources for demanding embedded and signal-processing systems.
The Kintex-7 architecture provides 400 I/O in the FFG676 package, 25,475 CLBs, and 16,404,480 RAM bits. The FFG676 package is a surface-mount FCBGA offered in tray packaging for production-board assembly. The -2L family grade is screened for lower maximum static power and lower core operating voltage than the -2 grade, supporting lower dynamic power in designs where energy efficiency is important.
AMD describes Kintex-7 as a 28 nm FPGA family offering high price/performance and support for interfaces including PCIe Gen3 and 10 Gigabit Ethernet. Dedicated resources make the device suitable for parallel signal processing, custom accelerators, protocol bridging, industrial control, communications infrastructure, test equipment, and high-performance embedded processing. Device configuration, pin constraints, and package assignment should be implemented with the Vivado design suite and the Kintex-7 package documentation.
A key design consideration is the BGA assembly and power architecture. The 676-ball package requires careful PCB escape routing, adequate thermal design, and validation of every power rail before configuration. Board designers should use AMD package pinout files and UG475 when creating constraints. Differential and high-speed interfaces also require controlled impedance, continuous reference planes, and length matching consistent with the selected transceiver and interface requirements.
This page combines the exact device identity, package characteristics, commercial sourcing guidance, same-family migration options, and practical design considerations into an engineering-focused selection reference for XC7K325T-L2FFG676I.
Bộ thay thế dễ dàng lắp đặt cho XC7K325T-L2FFG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7K325T-L2FFG676I (cùng hình factor và footprint) — khác nhau ở Speed Grade, Package, User I/O, Device Type, Block RAM.
XC7K325T-2FFG676I
✅ Drop-In✓ Còn hàng
$98 / Đơn vị
Xem tài liệu →XC7K325T-1FFG676I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7K325T-2FFG676C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7K325T-3FFG676E
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7K325T-L1FFG676I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7K325T-L2FFG676I Tỷ lệ tối đa & tính chất điện
| Device Type | Kintex-7 Field Programmable Gate Array (FPGA) |
| Process Technology | 28 nm |
| Logic Cells | 326,080 cells |
| Configurable Logic Blocks | 25,475 CLBs |
| Block RAM | 16,404,480 bits |
| User I/O | 400 I/O |
| DSP Slices | 1,900 slices |
| High-Speed Transceivers | 96 GTX transceivers |
| Hộp | 676-ball FCBGA (FFG676) |
| Package Form | 676-BBGA, FCBGA |
| Kiểu lắp đặt | Surface Mount |
| Packaging Type | Tray |
| Speed Grade | -2L lower-power industrial grade |
| Khoảng nhiệt độ hoạt động | -40°C to +100°C |
| Interface Support | PCIe Gen3 and 10 Gigabit Ethernet |
Hướng dẫn cấu hình chân XC7K325T-L2FFG676I 676-bbga, fcbga
Cấu hình chân cho XC7K325T-L2FFG676I (676-bbga, fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7K325T-L2FFG676I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7K325T-L2FFG676I phù hợp cho 6 Áp dụngs: Industrial Control and Automation, High-Speed Network Processing, Digital Signal Processing Accelerator, PCIe Endpoint and Storage Controller, Test and Measurement Equipment, Machine Vision and Inspection.
Industrial Control and Automation
The XC7K325T-L2FFG676I fits factory automation controllers that combine deterministic control logic with multiple communications interfaces. Its 326,080 logic cells and 25,475 CLBs provide substantial capacity for sequencing, motion-control datapaths, safety interlocks, and multi-axis machine logic, while 400 user I/O support encoders, sensors, actuators, and discrete industrial interfaces. The -40°C to +100°C range suits controlled industrial equipment, and the -2L grade emphasizes lower static and dynamic power. Designers should still implement the power rails, clocking, and decoupling according to the AMD device power guidelines.
Được đề xuất
High-Speed Network Processing
The XC7K325T-L2FFG676I is appropriate for packet processing, protocol termination, and high-speed network aggregation. Its 96 GTX transceivers provide parallel serial connectivity, while 326,080 logic cells and 16,404,480 RAM bits support parsing, classification, buffering, and traffic management. AMD identifies PCIe Gen3 and 10 Gigabit Ethernet as major Kintex-7 application areas. In a network card or appliance, the FFG676 package must be surrounded by controlled-impedance PCB routing, adequate power delivery, and thermal management for sustained transceiver activity.
Được đề xuất
Digital Signal Processing Accelerator
The XC7K325T-L2FFG676I can implement parallel filters, FFT engines, modulation paths, and custom fixed-point accelerators because it includes 1,900 DSP slices alongside 326,080 logic cells. The 16,404,480 RAM bits add local storage for samples and pipeline stages, reducing pressure on external memory for streaming workloads. Engineers should map arithmetic to DSP48 resources, use the Vivado synthesis and implementation reports, and verify timing at the required clock frequency. The lower-power -2L grade is attractive when sustained processing must balance throughput against thermal limits.
Được đề xuất
PCIe Endpoint and Storage Controller
The XC7K325T-L2FFG676I supports embedded PCIe Gen3 endpoint and storage-controller designs that require both programmable logic and high-speed serial I/O. Its 96 GTX transceivers and 400 user I/O allow the FPGA to consolidate endpoint logic, data paths, status monitoring, and board-level interfaces in one package. The 676-ball FCBGA demands precise BGA fanout and multilayer power distribution. Signal-integrity work should include controlled impedances, return-path continuity, and transceiver-oriented reference designs or application guidance.
Được đề xuất
Test and Measurement Equipment
The XC7K325T-L2FFG676I is suitable for modular test systems, waveform processing, protocol analyzers, and automated measurement platforms. Its large programmable fabric can implement parallel acquisition logic, trigger systems, channel processing, and multiple protocol engines, while DSP slices accelerate filtering and numerical operations. The FFG676 package provides enough I/O for external converters, memories, and clock sources, but high-speed analog interfaces still require separate data-acquisition circuitry. Timing closure, clock jitter, and board-level signal integrity should be evaluated together.
Được đề xuất
Machine Vision and Inspection
The XC7K325T-L2FFG676I can implement machine-vision preprocessing, feature extraction, image filtering, and real-time decision logic. Its 1,900 DSP slices are useful for pixel and signal arithmetic, 16,404,480 RAM bits support line buffers and working memory, and 400 I/O provide interfaces to cameras, sensors, memory, and motion-control hardware. The -2L grade and industrial temperature range fit equipment operating in changing industrial environments. Camera-interface timing, external memory bandwidth, and FPGA thermal rise must be validated in the complete camera and lighting system.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7K325T-L2FFG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7K325T-2FFG676I | XC7K325T-1FFG676I | XC7K325T-2FFG676C | XC7K325T-3FFG676E | XC7K325T-L1FFG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FCBGA (FFG676) | 676-ball FCBGA (FFG676) - same | 676-ball FCBGA (FFG676) - same | 676-ball FCBGA (FFG676) - same | 676-ball FCBGA (FFG676) - same | 676-ball FCBGA (FFG676) - same |
| Logic Cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells |
| User I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O |
| Block RAM | 16,404,480 bits | 16,404,480 bits | 16,404,480 bits | 16,404,480 bits | 16,404,480 bits | 16,404,480 bits |
| Speed Grade | -2L lower-power grade | -2 standard grade | -1 standard grade | -2 standard grade | -3 extended-temperature grade | -1L lower-power grade |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| DSP Slices | 1,900 slices | 1,900 slices | 1,900 slices | 1,900 slices | 1,900 slices | 1,900 slices |
| GTX Transceivers | 96 transceivers | 96 transceivers | 96 transceivers | 96 transceivers | 96 transceivers | 96 transceivers |
Bảo phân biệt quan trọng
- Lower-power -2L grade within the high-capacity Kintex-7 family (vsXC7K325T-2FFG676I)
- Full FFG676 resource density for high-speed and parallel processing (vsXC7K325T-1FFG676I)
- Industrial-temperature ordering option (vsXC7K325T-2FFG676C)
- Lower-power industrial grade without reducing package I/O (vsXC7K325T-L1FFG676I)
Ghi chú thiết kế
Use AMD's FFG676 package files and UG475 when defining the PCB footprint, ball assignments, power planes, and I/O constraints. The 676-ball FCBGA requires multilayer escape routing and careful via placement beneath the device. Keep high-speed transceiver routes on continuous reference planes, avoid plane splits beneath interfaces, and validate the stackup with the fabricator before release because package-level compatibility does not guarantee high-speed channel performance.
Implement the complete AMD power architecture rather than treating the FPGA as a single supply rail. Decouple each required voltage domain according to the device power guidelines, verify sequencing where applicable, and provide current capacity for simultaneous logic, DSP, memory, and GTX activity. The -2L grade can reduce power relative to the standard -2 device, but final dissipation depends on utilization, clocking, I/O activity, environment, and the implemented design.
Place the FFG676 device over a continuous thermal-via field and maintain copper on both sides of the PCB where the stackup allows. Estimate junction temperature from actual board copper, via count, airflow, and the design's power map rather than package dimensions alone. Validate the assembled board with Vivado power analysis and thermal testing, especially when 96 GTX transceivers, DSP slices, and external memories operate concurrently.
Do not approve a replacement based only on the FFG676 package designation. Review the exact speed grade, temperature suffix, qualification status, power requirements, configuration behavior, and timing results. Packages with the same ball count can differ in assigned I/O, dedicated resources, power architecture, and bank boundaries. Run Vivado synthesis, implementation, and timing analysis on the final part number and update the device and package constraints before schematic release.
Thông tin tuân thủ
No explicit compliance declaration was identified for this exact order code. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation for the selected ordering code.