XC7K410T-2FBG676C - Kintex-7 406K FPGA | AMD
MPN: XC7K410T-2FBG676C ✓ Hoạt độngXC7K410T-2FBG676C Tóm tắt
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and dedicated hardware blocks are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic, block RAM, DSP resources, programmable I/O, and clocking into one device. This integration lets a system implement parallel processing, interface bridging, protocol handling, and signal processing without using multiple fixed-function chips.
The XC7K410T-2FBG676C belongs to AMD's Kintex-7 family, which is manufactured using a 28 nm process. AMD describes the family as a price/performance and performance/watt solution for communications, networking, industrial, and embedded systems. Its principal device resources include 406,720 logic cells and 400 user I/O, providing substantial parallel-processing capacity and external connectivity.
The FBG676 designation identifies the 676-ball FCBGA package used by this ordering code. Its large ball grid supports dense connections between the FPGA fabric and surrounding circuitry, while the -2 speed grade distinguishes it from lower-speed XC7K410T variants. The C temperature suffix corresponds to a commercial operating range of 0 °C to 85 °C, making the device appropriate for equipment intended for controlled commercial environments.
Typical uses include high-throughput network packet processing, industrial control and test equipment, embedded video pipelines, serial-interface aggregation, and programmable logic for instrumentation. The 406,720-cell fabric is especially useful when a design requires many parallel lanes or custom hardware functions that would otherwise require multiple processors, FPGAs, or discrete logic devices.
PCB design should use the AMD Kintex-7 package pinout files and UG475 guidance for ball assignment, power planning, and PCB layout. Designers should also review the device-specific datasheet for supported I/O standards, speed grades, configuration requirements, and power-sequencing constraints before releasing the schematic or PCB.
This product page combines the verified family specifications, order-code details, sourcing references, and practical package-planning information. It also identifies same-package alternatives for speed- and temperature-grade decisions while clearly separating pin-compatible migration from broader FPGA replacements that require a different package or board design.
Bộ thay thế dễ dàng lắp đặt cho XC7K410T-2FBG676C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7K410T-2FBG676C (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Core Voltage, Device Type, Logic Cells.
XC7K410T-2FBG676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7K410T-1FBG676C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7K410T-1FBG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K410T-2FFG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7K410T-2FFG676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC7K410T-1FFG676C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7K410T-2FBG676C Tỷ lệ tối đa & tính chất điện
| Device Type | Kintex-7 field-programmable gate array |
| Logic Cells | 406,720 cells |
| User I/O | 400 I/O |
| Process Technology | 28 nm |
| Core Voltage | 1 V |
| Speed Grade | -2 |
| Temperature Grade | Commercial, 0 °C to 85 °C |
| Hộp | 676-ball FCBGA |
| Package Designation | FBG676 |
| Nhiệt độ hoạt động | 0 °C to 85 °C |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân XC7K410T-2FBG676C fbg676
Cấu hình chân cho XC7K410T-2FBG676C (fbg676 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7K410T-2FBG676C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7K410T-2FBG676C phù hợp cho 6 Áp dụngs: High-Speed Network Packet Processing, Industrial Control and Automation, Test and Measurement Instrumentation, Embedded Video and Image Processing, Server and Storage Data Paths, Aerospace and Defense Prototyping.
High-Speed Network Packet Processing
The XC7K410T-2FBG676C suits network equipment requiring extensive parallel logic, deterministic I/O, and programmable protocol handling. Its 406,720 logic cells can support packet classification, queues, header processing, traffic shaping, and custom forwarding functions, while 400 user I/O provide substantial external connectivity. The -2 speed grade is useful when timing closure requires more performance than the lower -1 grade. In a line-card or switch design, the FPGA can parallelize packet stages and reduce dependence on sequential processor execution. Design validation should include the official FBG676 ball map, supported I/O standards, clocking architecture, and timing constraints before PCB release.
Được đề xuất
Industrial Control and Automation
The XC7K410T-2FBG676C can implement deterministic machine-control, motion sequencing, data acquisition, and safety-adjacent logic in a single programmable device. The 406,720-cell fabric provides substantial parallelism for coordinating sensors, actuators, counters, timers, and communication interfaces, while the 400 I/O allow multiple control domains to be consolidated. The commercial 0 °C to 85 °C range fits controlled industrial equipment, whereas harsher installations should use the industrial-grade XC7K410T-2FBG676I. Engineers should define clock domains and reset behavior early, then verify every bank voltage, termination rule, and package connection against the manufacturer package files.
Được đề xuất
Test and Measurement Instrumentation
The XC7K410T-2FBG676C is well suited to instrumentation that combines acquisition, pattern generation, signal analysis, and control in one FPGA. Its large 406,720-cell fabric allows multiple parallel channels and sophisticated timing or digital-signal-processing functions, while 400 user I/O support converters, memory interfaces, trigger logic, and communication ports. The -2 grade can improve timing margin in demanding acquisition paths when the lower -1 grade cannot close timing. Because precision instruments often combine several supply domains, designers should consult the device datasheet for bank-specific voltage and decoupling requirements rather than assuming that the nominal 1 V core voltage applies to every I/O bank.
Được đề xuất
Embedded Video and Image Processing
The XC7K410T-2FBG676C can implement parallel image acquisition, pixel processing, color conversion, scaling, and interface bridging because its 406,720 logic cells provide substantial programmable capacity. The 400 user I/O are useful for connecting parallel sensors, memory devices, and external interfaces, while the -2 speed grade supports timing-sensitive pixel pipelines. A designer can partition the FPGA into dedicated acquisition, processing, and output regions while maintaining deterministic internal clocking. The 676-ball FCBGA also offers many external connections for high-bandwidth memories and serializers. Before layout, use the official package files to assign power, ground, and high-speed I/O while preserving the device's bank and decoupling requirements.
Được đề xuất
Server and Storage Data Paths
The XC7K410T-2FBG676C can accelerate server and storage data paths by handling parallel protocol logic, data movement, compression, encryption, or error checking in programmable hardware. Its 406,720 logic cells and 400 user I/O make it appropriate for wide data buses and multiple high-speed interfaces, while the -2 speed grade helps preserve throughput under demanding timing constraints. Such designs often use FPGA logic between network controllers, memory, and storage media to reduce processor overhead. The implementation must account for clock-domain crossings, reset distribution, board-level channel loss, and power budgeting. Use the manufacturer package and design documentation to implement correct termination and interface constraints.
Được đề xuất
Aerospace and Defense Prototyping
The XC7K410T-2FBG676C provides substantial programmable logic and I/O for aerospace and defense prototypes requiring configurable signal processing, telemetry, control, or communication functions. The 406,720-cell Kintex-7 device supports parallel architectures and complex interface logic, while the 28 nm process and -2 speed grade serve performance-oriented designs. Qualification status and environmental limits must be checked separately for each ordering code; the commercial XC7K410T-2FBG676C designation does not by itself establish suitability for a flight program. Engineers should review the applicable AMD documentation, perform timing and power analysis, and confirm that all required interfaces, package details, and environmental requirements are satisfied for the intended deployment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7K410T-2FBG676C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7K410T-2FBG676I | XC7K410T-1FBG676C | XC7K410T-1FBG676I | XC7K410T-2FFG676C | XC7K410T-2FFG676I |
|---|---|---|---|---|---|---|
| Brand | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices |
| Package | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA |
| Logic Cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells | 406,720 cells |
| User I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Grade | -2 | -2 | -1 | -1 | -2 | -2 |
| Temperature Grade | Commercial, 0 °C to 85 °C | Industrial | Commercial, 0 °C to 85 °C | Industrial | Commercial, 0 °C to 85 °C | Industrial |
| Package Code | FBG676 | FBG676 | FBG676 | FBG676 | FFG676 | FFG676 |
Bảo phân biệt quan trọng
- Higher speed grade within the same XC7K410T family (vsXC7K410T-1FBG676C)
- Commercial-temperature ordering for controlled environments (vsXC7K410T-2FBG676I)
- High-density programmable logic for parallel data paths (vsXC7K410T-1FFG676C)
Ghi chú thiết kế
Use the official Kintex-7 package-device pinout files and UG475 guidance before assigning the FBG676 balls. The package contains 676 balls, including power, ground, configuration, and user I/O; a complete ball map is essential for avoiding routing conflicts. Check mechanical drawings, PCB layer stack, ball-pad dimensions, and assembly requirements against the current AMD package documentation rather than relying on a generic BGA footprint.
Separate the nominal 1 V core supply from the I/O and auxiliary rails. Confirm each voltage, tolerance, current limit, sequencing condition, and decoupling recommendation in the XC7K410T device documentation. Place required high-frequency decoupling capacitors close to their associated package balls, provide adequate power-plane connectivity, and verify that the board's supply network can support both static and dynamic FPGA current without excessive voltage droop.
Plan high-speed interfaces as complete signal paths with continuous reference planes and controlled return paths. Match external interface trace lengths where the supported protocol requires it, apply manufacturer-recommended termination, and account for package and board loss. Because the XC7K410T supports many I/O standards, validate each interface's voltage, drive strength, slew rate, and timing constraints before selecting pins or committing the layout.
Do not treat speed-grade, temperature-grade, and package-code changes as interchangeable without checking each dimension. The -1 and -2 grades affect timing performance, C and I identify different temperature classes, and FBG676 and FFG676 require package-file comparison. Before substitution, verify the exact bill of materials, timing constraints, power architecture, configuration pins, ball map, and board-level footprint.
Thông tin tuân thủ
No definitive compliance statement for the exact ordering code was found in the cited records. Review the current manufacturer product documentation and applicable declaration before production release.