XC9536XL-10VQ64I - 36-Macrocell 3.3V CPLD | AMD
MPN: XC9536XL-10VQ64I ✗ Cuối đờiXC9536XL-10VQ64I Tóm tắt
A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that combines a relatively small number of nonvolatile macrocells with a programmable interconnect. Within the broader hierarchy of programmable-logic devices, the XC9500XL family belongs to the CPLD segment rather than the FPGA segment. Its deterministic timing, relatively simple architecture, and nonvolatile configuration make it suitable for consolidating fixed control, interface, decode, and glue-logic functions into one package.
Three headline characteristics define the XC9536XL-10VQ64I: 36 macrocells, 36 I/O pins, and a 3.3 V core supply. The device provides approximately 800 usable gates in the XC9500XL product description. Individual output enables, local output inversion, and input hysteresis support practical board-level implementation, while bus-hold behavior helps retain valid logic states during system operation. The industrial-temperature I suffix identifies the relevant ordering variant for industrial environments.
The device uses 0.35 µm CMOS technology and supports in-system programming with a specified minimum of 10,000 program or erase cycles. Its boundary-scan support, individual input features, and hot-pluggable interfaces align with established CPLD design practices. Signal outputs can operate at 3.3 V or 2.5 V, and the input structure accepts 5 V, 3.3 V, and 2.5 V signals. Exact timing, current, and absolute-maximum ratings should be taken from the AMD XC9536XL High Performance CPLD datasheet DS058.
Typical uses include industrial control logic, telecommunications interface consolidation, peripheral address decoding, programmable bus arbitration, and compact general-purpose logic in legacy or long-lifecycle equipment. The 64-pin VQFP provides enough I/O for multiplexed buses, status and control signals, and multiple external interfaces. The -10 grade is appropriate when approximately 10 ns-class external logic timing is sufficient, while a faster grade may be preferred for more demanding clocked interfaces.
The primary PCB consideration is decoupling. Place the required supply capacitors close to the power and ground pins, keep clock and high-speed routing short, and provide unobstructed return paths beneath the package. Because the XC9536XL is a nonvolatile CPLD, verify the programmed configuration, pin assignments, and voltage compatibility before substituting a different device or package.
This page consolidates the verified device specifications, ordered-part-number differences, package constraints, and practical selection criteria. It also separates true package-compatible alternatives from broader CPLD equivalents that require design verification, helping engineers identify the exact XC9500XL replacement behavior needed for an existing PCB.
Bộ thay thế dễ dàng lắp đặt cho XC9536XL-10VQ64I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC9536XL-10VQ64I (cùng hình factor và footprint) — khác nhau ở Package, Lead-Free Status, RoHS Status, Number of Macrocells, Boundary Scan.
XC9536XL-7VQ64I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC9536XL-10VQG64I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-10VQG64C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-10VQ64C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC9536XL-7VQG64C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC9536XL-10VQ64I Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Device Family | XC9500XL |
| Core Supply Voltage | 3.3 V |
| Number of Macrocells | 36 macrocells |
| Number of User I/O Pins | 36 I/O |
| Usable Logic Gates | 800 gates |
| Maximum System Frequency | 100 MHz |
| Pin-to-Pin Logic Delay | 5 ns |
| Internal System Frequency | 208 MHz |
| Process Technology | 0.35 µm CMOS |
| Hộp | 64-pin VQFP, 10 mm × 10 mm |
| Input Signal Compatibility | 5 V, 3.3 V, and 2.5 V |
| Output Voltage Capability | 3.3 V or 2.5 V |
| Programming Type | In-System Programmable |
| Program and Erase Cycles | Minimum 10,000 cycles |
| Output Enable Control | Individual output enable per output pin |
| Local Output Inversion | Supported |
| Input Hysteresis | Supported on user and boundary-scan inputs |
| Bus Hold | Supported on user input pins |
| Hot-Plugging Capability | Supported |
| Boundary Scan | IEEE 1149.1-compatible boundary-scan support |
| Trạng thái RoHS | RoHS non-compliant |
| Lead-Free Status | Contains lead |
Hướng dẫn cấu hình chân XC9536XL-10VQ64I 64-pin vqfp, 10 mm × 10 mm
Cấu hình chân cho XC9536XL-10VQ64I (64-pin vqfp, 10 mm × 10 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC9536XL-10VQ64I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC9536XL-10VQ64I phù hợp cho 6 Áp dụngs: Industrial Control Logic, Telecommunications Interface Consolidation, Peripheral Address Decoding, Programmable Bus Arbitration, Legacy Equipment Maintenance, LED and Display Control.
Industrial Control Logic
The XC9536XL-10VQ64I fits compact industrial control boards that require deterministic programmable logic near the processor or field interface. Its 36 macrocells and 36 user I/O can consolidate decoding, interlock logic, latch controls, alarm handling, and status multiplexing without a larger FPGA. The -10 grade provides 5 ns pin-to-pin logic delay, while the device operates from 3.3 V and accepts 5 V-tolerant inputs for compatibility with 5 V, 3.3 V, and 2.5 V system signals. The I suffix supports industrial-temperature use when the exact operating range is acceptable. In-system programming also permits configuration during production test without adding a separate socketed programming arrangement.
Được đề xuất
Telecommunications Interface Consolidation
The XC9536XL-10VQ64I is suitable for telecommunications equipment requiring a compact interface and protocol glue-logic device. Its 36 I/O pins provide enough parallel signals for address selection, command decoding, control lines, and status multiplexing, while the 5 ns pin-to-pin delay supports shorter combinational paths than a generic 10 ns design target. The 3.3 V core supply integrates with modern line-card logic, and 5 V-tolerant inputs simplify interfacing with mixed-voltage legacy circuits. Bus hold, input hysteresis, individual output enables, and hot-pluggable interfaces improve behavior in controlled, multi-board equipment. Boundary-scan support can also simplify board-level diagnostic and production-test workflows.
Được đề xuất
Peripheral Address Decoding
The XC9536XL-10VQ64I can implement distributed peripheral address decoding and chip-select generation in embedded systems. A 36-macrocell device provides more capacity than a small fixed PAL while retaining the relatively simple programming model of the XC9500XL CPLD family. Its 5 ns pin-to-pin logic delay gives designers useful timing margin for decoder paths, and individual output enables allow each decoded select to be controlled independently. Local inversion and input hysteresis help implement active-low controls and improve noise tolerance. The 64-pin VQFP also exposes enough pins for several chip-select outputs, banked enables, and bus-status inputs without requiring a larger programmable-logic package.
Được đề xuất
Programmable Bus Arbitration
The XC9536XL-10VQ64I can implement arbitration, request prioritization, timeout, and bus-transfer sequencing in systems that need autonomous logic between a processor and peripheral devices. The device's 36 macrocells can hold multiple state machines in parallel, while its 36 I/O pins accommodate requests, grants, busy indicators, arbitration outputs, and bus-control signals. The -10 timing grade provides a 5 ns pin-to-pin logic delay for shorter decision paths, and local output inversion simplifies active-low handshake conventions. Individual output enables support tri-state or isolation behavior where required. Nonvolatile configuration makes the arbitration policy stable across power cycles and suitable for long-lifecycle control or instrumentation equipment.
Được đề xuất
Legacy Equipment Maintenance
The XC9536XL-10VQ64I is well suited to maintaining legacy electronic equipment whose original design depends on a discrete XC9500XL CPLD. Its nonvolatile configuration, 36 macrocells, 36 I/O, and 64-pin VQFP format support direct board-level continuity when an equivalent ordering variant meets the required timing and temperature grades. For industrial systems, the I suffix is the appropriate ordering family; a C suffix may require temperature derating or qualification review. In-system programming and boundary-scan support help production technicians configure and diagnose replacements. A lifecycle-conscious purchasing plan should also preserve the original programming file, pin assignment, and device identification information before maintenance quantities are consumed.
Được đề xuất
LED and Display Control
The XC9536XL-10VQ64I can manage display sequencing, LED drive multiplexing, keypad scanning, and panel status logic in compact embedded products. Thirty-six user I/O are sufficient for multiple display lines, indicator outputs, key inputs, and control signals, while the 36 macrocells support multiple counters, state machines, and decode tables. Its 5 ns pin-to-pin logic delay is useful in scan chains where input qualification and output update timing are important. The 3.3 V core supply can operate outputs at 3.3 V or 2.5 V, and 5 V-tolerant inputs can simplify connection to selected legacy panel signals. Proper current limiting and voltage-level verification remain external to the CPLD.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC9536XL-10VQ64I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC9536XL-7VQ64I | XC9536XL-10VQG64I | XC9536XL-10VQG64C | XC9536XL-10VQ64C | XC9536XL-7VQG64C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 64-pin VQFP, 10 mm × 10 mm | 64-pin VQFP | 64-pin VQFP | 64-pin VQFP | 64-pin VQFP | 64-pin VQFP |
| Device Family | XC9500XL | XC9500XL | XC9500XL | XC9500XL | XC9500XL | XC9500XL |
| Number of Macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells |
| Number of User I/O | 36 I/O | 36 I/O | 36 I/O | 36 I/O | 36 I/O | 36 I/O |
| Core Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Speed Grade | -10 | -7 | -10 | -10 | -10 | -7 |
| Temperature Grade | Industrial (I suffix) | Industrial (I suffix) | Industrial (I suffix) | Commercial (C suffix) | Commercial (C suffix) | Commercial (C suffix) |
| System Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Input Tolerance | 5 V, 3.3 V, and 2.5 V inputs | 5 V, 3.3 V, and 2.5 V inputs | 5 V, 3.3 V, and 2.5 V inputs | 5 V, 3.3 V, and 2.5 V inputs | 5 V, 3.3 V, and 2.5 V inputs | 5 V, 3.3 V, and 2.5 V inputs |
Bảo phân biệt quan trọng
- Exact industrial-temperature ordering option (vsXC9536XL-10VQ64C)
- Direct timing option for design margin (vsXC9536XL-7VQ64I)
- Package-code continuity within the same device family (vsXC9536XL-10VQG64I)
- Avoids reliance on unverified cross-manufacturer footprint compatibility (vsATF1502AS-10)
Ghi chú thiết kế
Place the manufacturer-recommended bypass capacitors adjacent to the XC9500XL supply and ground pins. Because this CPLD supports 5 V-tolerant inputs but operates from a 3.3 V core supply, keep the VCC rails clean and separate from externally powered input paths. Check the power-up and power-down limits in AMD datasheet DS058 before using hot-plug capability, especially when an attached circuit can drive a pin while the CPLD supply is changing.
Preserve the 64-pin VQFP land pattern and verify the package code before authorizing a replacement. Q and G package-code alternatives appear in the XC9536XL ordering family, but the land pattern, pin assignments, and exposed thermal or electrical details must match the assembled PCB. Confirm pin 1 orientation in the package drawing and use the manufacturer pin-description table for every board net assignment.
Route clock, address, and control paths directly, keeping stubs short and providing continuous ground references beneath signal traces. The device includes input hysteresis and bus hold, which assist signal integrity but do not remove the need for correct rise-time, loading, and topology analysis. Use the timing model and worst-case external delay values in DS058 when constraining setup and hold requirements for paths entering or leaving the CPLD.
Do not treat an I suffix and a C suffix as interchangeable without checking ambient-temperature requirements. Likewise, selecting the -7 grade can change timing characteristics and programming-file validation assumptions. Before substitution, compare the full ordering code, operating-temperature grade, package drawing, pin table, supply voltage, and I/O voltage conditions. Broader CPLD equivalents from other manufacturers require a complete PCB, logic, and programming-tool review rather than a footprint-only comparison.
Thông tin tuân thủ
The exact XC9536XL-10VQ64I ordering variant is identified as RoHS non-compliant and containing lead. REACH, halogen-free, and conflict-minerals status are unknown.