XC9536XL-7PC44I - 36-Cell 7.5ns Flash CPLD | AMD
MPN: XC9536XL-7PC44I ✗ Cuối đờiXC9536XL-7PC44I Tóm tắt
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that converts Boolean equations and state-machine logic into a fixed digital circuit. Within the programmable-logic hierarchy, a CPLD belongs to the broader PLD family and provides an alternative to FPGA implementations when relatively compact logic, predictable timing, and in-system reconfiguration are important. The XC9500XL architecture uses interconnected function blocks and programmable interconnect resources to implement control, interface, and glue-logic functions.
The XC9536XL-7PC44I provides 36 macrocells and 800 usable gates. Its 7.5 ns propagation-delay grade supports logic operating in the approximately 200 MHz internal-frequency class reported for this device family. Thirty-four user I/Os provide connections to external control and interface circuits. Because the part is FLASH-programmable, logic can be updated in circuit without removing the device, which is useful during prototype debugging, production configuration, and field maintenance.
The XC9500XL family architecture is organized around two 36V18 function blocks, providing 800 usable gates and programmable routing between logic elements. Its enhanced pin-locking capability supports migration across density options within a compatible package footprint. The 7.5 ns speed grade distinguishes this industrial-temperature, PLCC-44 version from faster or slower members of the same family.
Typical uses include industrial relay and monitoring control, programmable interface logic, bus decoding, sequencing, and embedded control glue logic. The XC9536XL-7PC44I is also appropriate for compact legacy systems that already use a 44-pin footprint and require a direct migration path to the XL device family. Designers must verify voltage compatibility, I/O standards, timing constraints, programming hardware, and the exact pin arrangement before substituting any alternative.
For a robust board layout, place the device close to its support circuitry and route programming signals away from sensitive analog or high-speed nets. Follow the manufacturer datasheet for supply decoupling, ISP connections, test pins, and unused-pin treatment. Confirm that the existing PCB land pattern and pin assignments match the selected device ordering code before releasing a replacement order.
This page combines the device architecture, ordering-code differences, verified package characteristics, and migration guidance with drop-in alternatives for engineering review. It also highlights the checks needed to distinguish an electrical drop-in from a merely similar CPLD before any board-level replacement is approved.
Bộ thay thế dễ dàng lắp đặt cho XC9536XL-7PC44I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC9536XL-7PC44I (cùng hình factor và footprint) — khác nhau ở Device Type, Function Block Architecture, Lead-Free Status, Package Type, Programmable Type.
XC9536XL-7PCG44I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-7PC44C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC9536XL-7PCG44C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC9536XL-5PC44C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-5PCG44C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-10PC44C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-7PC44I Tỷ lệ tối đa & tính chất điện
| Device Type | FLASH complex programmable logic device |
| Architecture | XC9500XL |
| Macrocell Count | 36 macrocells |
| Usable Gate Count | 800 gates |
| Propagation Delay Grade | 7.5 ns |
| Internal Frequency Class | 200 MHz |
| User I/O Count | 34 I/Os |
| Function Block Architecture | Two 36V18 function blocks |
| Điện áp cung cấp | 3.3 V |
| Logic Family | CMOS |
| Programming Technology | In-system programmable FLASH |
| Hộp | PLCC-44 |
| Package Code | QCCJ |
| Package Shape | Square |
| Terminal Form | J-bend |
| Kiểu lắp đặt | Surface mount |
| Total Terminal Count | 44 terminals |
| Temperature Grade | Industrial |
Hướng dẫn cấu hình chân XC9536XL-7PC44I square
Cấu hình chân cho XC9536XL-7PC44I (square gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC9536XL-7PC44I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC9536XL-7PC44I phù hợp cho 6 Áp dụngs: Industrial Relay Sequencing, Factory Equipment Interlocking, Programmable Bus Interface Logic, Monitor and Alarm Controller, Legacy Control-System Retrofit, Data-Acquisition Interface Control.
Industrial Relay Sequencing
The XC9536XL-7PC44I fits industrial relay sequencing because it combines 36 macrocells, 34 user I/Os, and a 7.5 ns speed grade in one PLCC-44 package. It can implement the state machine, interlocks, transition timing, and output decoding needed between a controller and discrete relays without using a larger FPGA. In-system FLASH programming allows logic revisions during equipment commissioning. The main design check is I/O voltage compatibility with the relay-driver electronics, since the CPLD supply and the external interface standards are not automatically interchangeable.
Factory Equipment Interlocking
For factory equipment interlocks, the XC9536XL-7PC44I can consolidate safety-adjacent sequencing, machine-state decoding, and discrete command routing into 800 usable gates. Thirty-four user I/Os provide enough connections for sensors, status lamps, and actuator-command stages while the 7.5 ns grade supports deterministic control paths. The industrial-temperature ordering grade suits demanding factory environments. Designers should partition external isolation, protection, and power conversion from the CPLD, and should test every new interlock against the machine's timing and fault-response requirements.
Programmable Bus Interface Logic
The XC9536XL-7PC44I is suitable for legacy bus-interface adaptation when the design needs address decoding, byte enables, handshake logic, or protocol state tracking. Its 36 macrocells and 34 user I/Os allow several narrow interfaces to share a compact programmable-logic implementation, while the 200 MHz internal-frequency class offers substantial timing margin relative to the 7.5 ns propagation grade. Supply and I/O levels must be checked against the connected bus because a compatible package does not guarantee electrical compatibility with a 5 V interface.
Monitor and Alarm Controller
A monitoring and alarm controller can use the XC9536XL-7PC44I to combine threshold comparison, debounce logic, alarm prioritization, and output latching within 800 usable gates. Thirty-four user I/Os support digital sensors, relay indicators, and status inputs, while the 7.5 ns grade permits short combinational paths for control and reporting functions. In-system programming is useful for adapting alarm mappings after installation. For safety-related behavior, validate the final fault logic independently and do not rely on the CPLD as the only protection mechanism.
Legacy Control-System Retrofit
The XC9536XL-7PC44I is appropriate for retrofitting legacy control boards that require programmable logic changes without a complete processor-board redesign. Its PLCC-44 package can support board-level replacement when the land pattern and pin functions match, and FLASH programming simplifies configuration updates. The 36-macrocell capacity is sufficient for moderate decoding and sequencing but not large protocol stacks. Before retrofit, confirm the supply voltage, I/O thresholds, ISP interface, pin locking, and programmer support because the original board architecture may have used a different XC9500 family variant.
Data-Acquisition Interface Control
The XC9536XL-7PC44I can control channel selection, latch timing, and data-routing logic in a compact data-acquisition interface. Thirty-four user I/Os are suitable for multiplexer addresses, trigger signals, and status lines, while the 7.5 ns grade supports short timing paths between acquisition commands and peripheral control. The 800-gate device is best for control-plane logic rather than high-throughput datapath processing. Engineers should verify clock, output-slew, and I/O-voltage requirements against the selected converters and acquisition components before finalizing the interface.
Dữ liệu tham khảo kỹ thuật cho XC9536XL-7PC44I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC9536XL-7PCG44I | XC9536XL-7PC44C | XC9536XL-7PCG44C | XC9536XL-5PC44C | XC9536XL-5PCG44C | XC9536XL-10PC44C |
|---|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| Temperature Grade | Industrial | Industrial | Commercial | Commercial | Commercial | Commercial | Commercial |
Bảo phân biệt quan trọng
- Exact industrial-temperature speed-grade configuration (vsXC9536XL-7PC44C)
- Matching logic density and I/O availability (vsXC9536XL-5PC44C)
- Close package-compatible family option with industrial ordering (vsXC9536XL-7PCG44I)
- FLASH-based in-system programmability (vsXC9536-7PC44I)
Ghi chú thiết kế
Validate the complete power interface before replacement. The XC9536XL family operates at 3.3 V, while a legacy XC9536 board may have been designed around 5 V I/O. Compare every connected signal's voltage level, input threshold, output-swing requirement, and supply current with the manufacturer datasheet. A matching PLCC-44 footprint does not make the XC9536XL electrically interchangeable with a 5 V XC9536 installation.
Confirm the physical PLCC-44 footprint rather than relying on the 44-pin count alone. Check lead pitch, lead span, pad dimensions, courtyard clearance, and J-bend orientation against the manufacturer package drawing and the assembled PCB. For an existing board, inspect for solder bridges, pad contamination, and heat damage before fitting a legacy CPLD, because these issues can appear as unstable ISP communication or intermittent logic failures.
Do not assume that two XC9536XL devices with different suffix codes are interchangeable. Confirm the macrocell density, speed grade, temperature range, supply voltage, I/O standard, programming configuration, and pin assignments from the manufacturer ordering information. Also verify that the existing JEDEC file targets the proposed replacement. A successful cable connection alone does not prove that the device is configured or pin-compatible.
Keep programming and test traces short, route them away from clocks and switching-node connections, and provide clean supply decoupling at the device pins. For systems with rising edge rates, examine available timing margins using the 7.5 ns target grade rather than assuming the 200 MHz internal-frequency class applies to every external path. The family provides enhanced pin locking, but board-level signal integrity still determines whether a design operates reliably in the field.
Thông tin tuân thủ
The device is identified as an industrial-temperature FLASH CPLD, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are present in the referenced material.