XC9536XL-7PC44I - 36-Cell 7.5ns Flash CPLD | AMD
料号: XC9536XL-7PC44I ✗ 停产XC9536XL-7PC44I 概述
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that converts Boolean equations and state-machine logic into a fixed digital circuit. Within the programmable-logic hierarchy, a CPLD belongs to the broader PLD family and provides an alternative to FPGA implementations when relatively compact logic, predictable timing, and in-system reconfiguration are important. The XC9500XL architecture uses interconnected function blocks and programmable interconnect resources to implement control, interface, and glue-logic functions.
The XC9536XL-7PC44I provides 36 macrocells and 800 usable gates. Its 7.5 ns propagation-delay grade supports logic operating in the approximately 200 MHz internal-frequency class reported for this device family. Thirty-four user I/Os provide connections to external control and interface circuits. Because the part is FLASH-programmable, logic can be updated in circuit without removing the device, which is useful during prototype debugging, production configuration, and field maintenance.
The XC9500XL family architecture is organized around two 36V18 function blocks, providing 800 usable gates and programmable routing between logic elements. Its enhanced pin-locking capability supports migration across density options within a compatible package footprint. The 7.5 ns speed grade distinguishes this industrial-temperature, PLCC-44 version from faster or slower members of the same family.
Typical uses include industrial relay and monitoring control, programmable interface logic, bus decoding, sequencing, and embedded control glue logic. The XC9536XL-7PC44I is also appropriate for compact legacy systems that already use a 44-pin footprint and require a direct migration path to the XL device family. Designers must verify voltage compatibility, I/O standards, timing constraints, programming hardware, and the exact pin arrangement before substituting any alternative.
For a robust board layout, place the device close to its support circuitry and route programming signals away from sensitive analog or high-speed nets. Follow the manufacturer datasheet for supply decoupling, ISP connections, test pins, and unused-pin treatment. Confirm that the existing PCB land pattern and pin assignments match the selected device ordering code before releasing a replacement order.
This page combines the device architecture, ordering-code differences, verified package characteristics, and migration guidance with drop-in alternatives for engineering review. It also highlights the checks needed to distinguish an electrical drop-in from a merely similar CPLD before any board-level replacement is approved.
直接替换替代料: XC9536XL-7PC44I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC9536XL-7PC44I (相同外形与封装尺寸) ——差异在于 Device Type, Function Block Architecture, Lead-Free Status, Package Type, Programmable Type.
XC9536XL-7PCG44I
✅ 直接替换📋 参考替代料(不在目录中)
XC9536XL-7PC44C
✅ 直接替换联系询价
查看数据手册 →XC9536XL-7PCG44C
✅ 直接替换联系询价
查看数据手册 →XC9536XL-5PC44C
✅ 直接替换📋 参考替代料(不在目录中)
XC9536XL-5PCG44C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC9536XL-10PC44C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC9536XL-7PC44I 最大额定值与电气特性
| Device Type | FLASH complex programmable logic device |
| Architecture | XC9500XL |
| Macrocell Count | 36 macrocells |
| Usable Gate Count | 800 gates |
| Propagation Delay Grade | 7.5 ns |
| Internal Frequency Class | 200 MHz |
| User I/O Count | 34 I/Os |
| Function Block Architecture | Two 36V18 function blocks |
| 电源电压 | 3.3 V |
| Logic Family | CMOS |
| Programming Technology | In-system programmable FLASH |
| 封装 | PLCC-44 |
| Package Code | QCCJ |
| Package Shape | Square |
| Terminal Form | J-bend |
| 安装方式 | Surface mount |
| Total Terminal Count | 44 terminals |
| Temperature Grade | Industrial |
XC9536XL-7PC44I square 引脚配置指南
XC9536XL-7PC44I(square 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC9536XL-7PC44I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC9536XL-7PC44I 适用于 6 应用s: Industrial Relay Sequencing, Factory Equipment Interlocking, Programmable Bus Interface Logic, Monitor and Alarm Controller, Legacy Control-System Retrofit, Data-Acquisition Interface Control.
Industrial Relay Sequencing
The XC9536XL-7PC44I fits industrial relay sequencing because it combines 36 macrocells, 34 user I/Os, and a 7.5 ns speed grade in one PLCC-44 package. It can implement the state machine, interlocks, transition timing, and output decoding needed between a controller and discrete relays without using a larger FPGA. In-system FLASH programming allows logic revisions during equipment commissioning. The main design check is I/O voltage compatibility with the relay-driver electronics, since the CPLD supply and the external interface standards are not automatically interchangeable.
Factory Equipment Interlocking
For factory equipment interlocks, the XC9536XL-7PC44I can consolidate safety-adjacent sequencing, machine-state decoding, and discrete command routing into 800 usable gates. Thirty-four user I/Os provide enough connections for sensors, status lamps, and actuator-command stages while the 7.5 ns grade supports deterministic control paths. The industrial-temperature ordering grade suits demanding factory environments. Designers should partition external isolation, protection, and power conversion from the CPLD, and should test every new interlock against the machine's timing and fault-response requirements.
Programmable Bus Interface Logic
The XC9536XL-7PC44I is suitable for legacy bus-interface adaptation when the design needs address decoding, byte enables, handshake logic, or protocol state tracking. Its 36 macrocells and 34 user I/Os allow several narrow interfaces to share a compact programmable-logic implementation, while the 200 MHz internal-frequency class offers substantial timing margin relative to the 7.5 ns propagation grade. Supply and I/O levels must be checked against the connected bus because a compatible package does not guarantee electrical compatibility with a 5 V interface.
Monitor and Alarm Controller
A monitoring and alarm controller can use the XC9536XL-7PC44I to combine threshold comparison, debounce logic, alarm prioritization, and output latching within 800 usable gates. Thirty-four user I/Os support digital sensors, relay indicators, and status inputs, while the 7.5 ns grade permits short combinational paths for control and reporting functions. In-system programming is useful for adapting alarm mappings after installation. For safety-related behavior, validate the final fault logic independently and do not rely on the CPLD as the only protection mechanism.
Legacy Control-System Retrofit
The XC9536XL-7PC44I is appropriate for retrofitting legacy control boards that require programmable logic changes without a complete processor-board redesign. Its PLCC-44 package can support board-level replacement when the land pattern and pin functions match, and FLASH programming simplifies configuration updates. The 36-macrocell capacity is sufficient for moderate decoding and sequencing but not large protocol stacks. Before retrofit, confirm the supply voltage, I/O thresholds, ISP interface, pin locking, and programmer support because the original board architecture may have used a different XC9500 family variant.
Data-Acquisition Interface Control
The XC9536XL-7PC44I can control channel selection, latch timing, and data-routing logic in a compact data-acquisition interface. Thirty-four user I/Os are suitable for multiplexer addresses, trigger signals, and status lines, while the 7.5 ns grade supports short timing paths between acquisition commands and peripheral control. The 800-gate device is best for control-plane logic rather than high-throughput datapath processing. Engineers should verify clock, output-slew, and I/O-voltage requirements against the selected converters and acquisition components before finalizing the interface.
工程参考数据: XC9536XL-7PC44I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC9536XL-7PCG44I | XC9536XL-7PC44C | XC9536XL-7PCG44C | XC9536XL-5PC44C | XC9536XL-5PCG44C | XC9536XL-10PC44C |
|---|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| Temperature Grade | Industrial | Industrial | Commercial | Commercial | Commercial | Commercial | Commercial |
关键差异点
- Exact industrial-temperature speed-grade configuration (对比 XC9536XL-7PC44C)
- Matching logic density and I/O availability (对比 XC9536XL-5PC44C)
- Close package-compatible family option with industrial ordering (对比 XC9536XL-7PCG44I)
- FLASH-based in-system programmability (对比 XC9536-7PC44I)
设计说明
Validate the complete power interface before replacement. The XC9536XL family operates at 3.3 V, while a legacy XC9536 board may have been designed around 5 V I/O. Compare every connected signal's voltage level, input threshold, output-swing requirement, and supply current with the manufacturer datasheet. A matching PLCC-44 footprint does not make the XC9536XL electrically interchangeable with a 5 V XC9536 installation.
Confirm the physical PLCC-44 footprint rather than relying on the 44-pin count alone. Check lead pitch, lead span, pad dimensions, courtyard clearance, and J-bend orientation against the manufacturer package drawing and the assembled PCB. For an existing board, inspect for solder bridges, pad contamination, and heat damage before fitting a legacy CPLD, because these issues can appear as unstable ISP communication or intermittent logic failures.
Do not assume that two XC9536XL devices with different suffix codes are interchangeable. Confirm the macrocell density, speed grade, temperature range, supply voltage, I/O standard, programming configuration, and pin assignments from the manufacturer ordering information. Also verify that the existing JEDEC file targets the proposed replacement. A successful cable connection alone does not prove that the device is configured or pin-compatible.
Keep programming and test traces short, route them away from clocks and switching-node connections, and provide clean supply decoupling at the device pins. For systems with rising edge rates, examine available timing margins using the 7.5 ns target grade rather than assuming the 200 MHz internal-frequency class applies to every external path. The family provides enhanced pin locking, but board-level signal integrity still determines whether a design operates reliably in the field.
合规信息
The device is identified as an industrial-temperature FLASH CPLD, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are present in the referenced material.