XC9572-7PQG100C - 72-Macrocell 5V ISP CPLD | AMD | TQFP-100
MPN: XC9572-7PQG100C ✗ Cuối đờiXC9572-7PQG100C Tóm tắt
A CPLD is a programmable-logic semiconductor that combines a structured array of macrocells with programmable interconnect resources. Within the broader hierarchy, this device belongs to the CPLD and programmable-logic-device class, then to the XC9500 family of Flash-based, in-system-programmable logic devices. Its deterministic architecture is useful when a design requires more integration than discrete programmable logic arrays while retaining nonvolatile configuration, field update capability, and a relatively simple development flow.
The XC9572 provides 72 macrocells, 72 user I/O pins, and 1,600 usable gates. The four-function-block architecture divides the device into 36 function blocks, allowing general-purpose logic integration with a fixed, regular structure. Its 7.5 ns pin-to-pin delay defines the advertised speed grade, while the 125 MHz maximum frequency is useful for designs combining logic functions with clocked or registered operations.
In-system programming allows the configuration memory to be programmed through the device's programming interface while it is mounted on a PCB. The Flash-based implementation supports at least 10,000 program-and-erase cycles, making field reconfiguration and production programming practical. The commercial temperature grade is identified by the C suffix, while the G designation is associated with the lead-free, RoHS-compliant ordering configuration.
Typical uses include interface control, bus arbitration, legacy peripheral glue logic, industrial control modules, test fixtures, and board-level logic consolidation. The 72 I/O pins provide substantial connectivity for control signals, status flags, and parallel buses, while the 72 macrocells allow multiple concurrent Boolean functions to be consolidated into one programmable device.
PCB design should account for the 100-pin TQFP footprint, programming signals, supply decoupling, and the I/O-drive requirements of every connected interface. Use the manufacturer's pin-description table when assigning package pins and verify whether external pull-up, pull-down, termination, or interface-level protection is required. Programming-tool compatibility should be confirmed for the specific cable and device algorithm before committing to production hardware.
This page combines the manufacturer data-sheet identity, practical CPLD design guidance, package details, and verified same-family replacement options. It also distinguishes speed-grade and temperature-grade alternatives, helping engineers choose a pin-compatible device without overlooking timing or operating-temperature differences.
Bộ thay thế dễ dàng lắp đặt cho XC9572-7PQG100C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC9572-7PQG100C (cùng hình factor và footprint) — khác nhau ở Device Type, Lead-Free Status, Package, Program/Erase Endurance, RoHS Status.
XC9572-5PQG100C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-10PQG100C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-10PQG100I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-7PQ100C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC9572-10PQ100C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9572-7PQG100C Tỷ lệ tối đa & tính chất điện
| Device Type | In-system-programmable CPLD |
| Programmable Technology | Flash-based |
| Macrocells | 72 macrocells |
| Function Blocks | 4 function blocks |
| Function Blocks per Block Group | 36 function blocks |
| Usable Gates | 1,600 usable gates |
| User I/O Pins | 72 user I/O pins |
| Pin-to-Pin Logic Delay | 7.5 ns |
| Maximum Frequency | 125 MHz |
| In-System Programming Voltage | 5 V |
| Program/Erase Endurance | At least 10,000 cycles |
| Temperature Grade | Commercial |
| Hộp | 100-pin TQFP |
| Package Code | QFP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Total Terminals | 100 terminals |
| Lead-Free Status | Lead free |
| Trạng thái RoHS | RoHS compliant |
Hướng dẫn cấu hình chân XC9572-7PQG100C rectangular
Cấu hình chân cho XC9572-7PQG100C (rectangular gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC9572-7PQG100C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC9572-7PQG100C phù hợp cho 6 Áp dụngs: Industrial Control and Logic Consolidation, Legacy Peripheral Interface Bridge, Bus Arbitration and Protocol Control, Test and Measurement Fixture Control, Security and Surveillance Control, Board-Level Programmable Glue Logic.
Industrial Control and Logic Consolidation
The XC9572-7PQG100C can consolidate control, interlocking, and status logic into one programmable device because it provides 72 macrocells, 72 user I/O pins, and 1,600 usable gates. Its 7.5 ns pin-to-pin delay supports general control paths that do not require the slower -10 grade. The four-function-block architecture gives a regular implementation target for machine-control interfaces. When used in an industrial enclosure, verify the commercial temperature rating against the actual ambient range and add appropriate isolation or protection at external interfaces.
Được đề xuất
Legacy Peripheral Interface Bridge
The XC9572 is suited to bridging parallel peripheral buses and discrete control signals because 72 user I/O pins provide substantial pin availability while 72 macrocells can implement address decode, arbitration, and state machines. A 7.5 ns delay gives more timing margin than the 10 ns speed grade in paths that sit close to a clock boundary. The 5 V in-system programming architecture permits board-level configuration and manufacturing test support, although the exact I/O voltage, drive strength, and edge-rate requirements must be checked against the system schematic.
Được đề xuất
Bus Arbitration and Protocol Control
With 72 macrocells and 1,600 usable gates, the XC9572-7PQG100C can implement deterministic arbitration, command decoding, interrupt control, and protocol sequencing without loading a host processor with repetitive I/O handling. The 7.5 ns -7 speed grade is useful when bus qualification must be completed within a shorter interval than the -10 grade permits. Designers should still budget setup and hold time, constrain unused pins where required, and validate the programmed configuration against the actual clock and board timing assumptions.
Được đề xuất
Test and Measurement Fixture Control
The XC9572-7PQG100C can implement programmable switch sequencing, stimulus routing, and measurement-control logic in a fixture because its 72 I/O pins and 72 macrocells support parallel control channels. Its 7.5 ns propagation delay helps maintain predictable sequencing among acquisition and routing signals. For lab equipment, the device can also be reprogrammed through the in-system interface, but production fixtures must include a compatible programming connection, controlled supply rails, and deterministic power-up behavior to avoid unsafe test states.
Được đề xuất
Security and Surveillance Control
The XC9572 can implement compact control logic for camera, access, alarm, or recording equipment by combining state-machine logic and I/O buffering in one device. The 72 user I/O pins support multiple sensor inputs and actuator outputs, while the 7.5 ns speed grade provides useful timing margin for sequential control signals. At the system level, the CPLD should not be treated as a cryptographic security boundary. Use it for control and glue functions while implementing authentication, key storage, and sensitive protection in appropriately designed security hardware.
Được đề xuất
Board-Level Programmable Glue Logic
The XC9572-7PQG100C is useful for legacy designs that need a compact replacement for several PAL or GAL devices and discrete logic gates. Its 72 macrocells, 1,600 usable gates, and 72 I/O pins provide enough integration to simplify a complex board without introducing a large FPGA footprint. The device retains a deterministic macrocell architecture and supports 5 V in-system programming, making it attractive for field updates. A migration should include library conversion, pin-state review, unused-pin treatment, and timing verification against the new -7 grade.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC9572-7PQG100C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC9572-5PQG100C | XC9572-10PQG100C | XC9572-10PQG100I | XC9572-7PQ100C | XC9572-10PQ100C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells |
| Usable Gates | 1,600 usable gates | 1,600 usable gates | 1,600 usable gates | 1,600 usable gates | 1,600 usable gates | 1,600 usable gates |
| User I/O Pins | 72 user I/O pins | 72 user I/O pins | 72 user I/O pins | 72 user I/O pins | 72 user I/O pins | 72 user I/O pins |
| Pin-to-Pin Logic Delay | 7.5 ns | 5 ns | 10 ns | 10 ns | 7.5 ns | 10 ns |
| In-System Programming | 5 V in-system programmable | 5 V in-system programmable | 5 V in-system programmable | 5 V in-system programmable | 5 V in-system programmable | 5 V in-system programmable |
Bảo phân biệt quan trọng
- Faster timing grade than the -10 replacements (vsXC9572-10PQG100C)
- Commercial-grade ordering with lead-free package construction (vsXC9572-10PQG100I)
- Retains the -7 speed grade in the alternate ordering code (vsXC9572-7PQ100C)
Ghi chú thiết kế
Use the AMD DS065 package drawing and pin-description table to create the 100-pin TQFP footprint and assign every signal. Place supply decoupling close to the device power pins, provide a low-impedance ground path, and keep programming access reachable for production test. Do not rely on a generic PQFP footprint without checking the lead pitch, body size, exposed thermal behavior, and pin numbering against the TQFP package outline.
Create timing constraints for every path that uses the 7.5 ns -7 speed grade, including control outputs, registered logic, and external interfaces. The 125 MHz figure is not a blanket guarantee for every board configuration; board delay, I/O loading, clock skew, and external device timing still contribute. Before substituting the -10 or -5 grade, rerun timing analysis because the available timing margin changes even when the footprint remains unchanged.
Do not assume every XC9572 programmer supports every XC9500-family device algorithm. Validate the programmer hardware, cable, driver, software version, and target-device algorithm on a known-good board before production programming. Also inspect the reset and power-up behavior of the assembled PCB so that I/O states remain safe while configuration Flash is being programmed.
Keep sensitive or high-fanout logic connections away from noisy power-stage and switching-node routing, and maintain short return paths for ground. For mixed-signal or industrial boards, isolate the CPLD's ground reference from high-current returns where the system architecture permits it. Treat unused pins and I/O standards according to the manufacturer data sheet rather than assigning them informally, because incorrect unused-pin states can affect power-up behavior or board testing.
Thông tin tuân thủ
The target is identified as lead free and RoHS compliant. REACH, halogen-free status, and conflict-minerals status are not specified.