XC9572-7PQG100C - 72-Macrocell 5V ISP CPLD | AMD | TQFP-100
MPN: XC9572-7PQG100C ✗ 停產XC9572-7PQG100C 概覽
A CPLD is a programmable-logic semiconductor that combines a structured array of macrocells with programmable interconnect resources. Within the broader hierarchy, this device belongs to the CPLD and programmable-logic-device class, then to the XC9500 family of Flash-based, in-system-programmable logic devices. Its deterministic architecture is useful when a design requires more integration than discrete programmable logic arrays while retaining nonvolatile configuration, field update capability, and a relatively simple development flow.
The XC9572 provides 72 macrocells, 72 user I/O pins, and 1,600 usable gates. The four-function-block architecture divides the device into 36 function blocks, allowing general-purpose logic integration with a fixed, regular structure. Its 7.5 ns pin-to-pin delay defines the advertised speed grade, while the 125 MHz maximum frequency is useful for designs combining logic functions with clocked or registered operations.
In-system programming allows the configuration memory to be programmed through the device's programming interface while it is mounted on a PCB. The Flash-based implementation supports at least 10,000 program-and-erase cycles, making field reconfiguration and production programming practical. The commercial temperature grade is identified by the C suffix, while the G designation is associated with the lead-free, RoHS-compliant ordering configuration.
Typical uses include interface control, bus arbitration, legacy peripheral glue logic, industrial control modules, test fixtures, and board-level logic consolidation. The 72 I/O pins provide substantial connectivity for control signals, status flags, and parallel buses, while the 72 macrocells allow multiple concurrent Boolean functions to be consolidated into one programmable device.
PCB design should account for the 100-pin TQFP footprint, programming signals, supply decoupling, and the I/O-drive requirements of every connected interface. Use the manufacturer's pin-description table when assigning package pins and verify whether external pull-up, pull-down, termination, or interface-level protection is required. Programming-tool compatibility should be confirmed for the specific cable and device algorithm before committing to production hardware.
This page combines the manufacturer data-sheet identity, practical CPLD design guidance, package details, and verified same-family replacement options. It also distinguishes speed-grade and temperature-grade alternatives, helping engineers choose a pin-compatible device without overlooking timing or operating-temperature differences.
直接替換替代品,適用於 XC9572-7PQG100C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC9572-7PQG100C (相同外形與佔位) — 差異在於 Device Type, Lead-Free Status, Package, Program/Erase Endurance, RoHS Status.
XC9572-5PQG100C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC9572-10PQG100C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC9572-10PQG100I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC9572-7PQ100C
✅ 直接替換聯絡詢價
查看資料表 →XC9572-10PQ100C
✅ 直接替換📋 參考替代品(不在目錄中)
XC9572-7PQG100C 最大額定值與電氣特性
| Device Type | In-system-programmable CPLD |
| Programmable Technology | Flash-based |
| Macrocells | 72 macrocells |
| Function Blocks | 4 function blocks |
| Function Blocks per Block Group | 36 function blocks |
| Usable Gates | 1,600 usable gates |
| User I/O Pins | 72 user I/O pins |
| Pin-to-Pin Logic Delay | 7.5 ns |
| Maximum Frequency | 125 MHz |
| In-System Programming Voltage | 5 V |
| Program/Erase Endurance | At least 10,000 cycles |
| Temperature Grade | Commercial |
| 封裝 | 100-pin TQFP |
| Package Code | QFP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Total Terminals | 100 terminals |
| Lead-Free Status | Lead free |
| RoHS 狀態 | RoHS compliant |
XC9572-7PQG100C rectangular 腳位配置指南
XC9572-7PQG100C(rectangular 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC9572-7PQG100C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC9572-7PQG100C 適用於 6 應用s: Industrial Control and Logic Consolidation, Legacy Peripheral Interface Bridge, Bus Arbitration and Protocol Control, Test and Measurement Fixture Control, Security and Surveillance Control, Board-Level Programmable Glue Logic.
Industrial Control and Logic Consolidation
The XC9572-7PQG100C can consolidate control, interlocking, and status logic into one programmable device because it provides 72 macrocells, 72 user I/O pins, and 1,600 usable gates. Its 7.5 ns pin-to-pin delay supports general control paths that do not require the slower -10 grade. The four-function-block architecture gives a regular implementation target for machine-control interfaces. When used in an industrial enclosure, verify the commercial temperature rating against the actual ambient range and add appropriate isolation or protection at external interfaces.
推薦
Legacy Peripheral Interface Bridge
The XC9572 is suited to bridging parallel peripheral buses and discrete control signals because 72 user I/O pins provide substantial pin availability while 72 macrocells can implement address decode, arbitration, and state machines. A 7.5 ns delay gives more timing margin than the 10 ns speed grade in paths that sit close to a clock boundary. The 5 V in-system programming architecture permits board-level configuration and manufacturing test support, although the exact I/O voltage, drive strength, and edge-rate requirements must be checked against the system schematic.
推薦
Bus Arbitration and Protocol Control
With 72 macrocells and 1,600 usable gates, the XC9572-7PQG100C can implement deterministic arbitration, command decoding, interrupt control, and protocol sequencing without loading a host processor with repetitive I/O handling. The 7.5 ns -7 speed grade is useful when bus qualification must be completed within a shorter interval than the -10 grade permits. Designers should still budget setup and hold time, constrain unused pins where required, and validate the programmed configuration against the actual clock and board timing assumptions.
推薦
Test and Measurement Fixture Control
The XC9572-7PQG100C can implement programmable switch sequencing, stimulus routing, and measurement-control logic in a fixture because its 72 I/O pins and 72 macrocells support parallel control channels. Its 7.5 ns propagation delay helps maintain predictable sequencing among acquisition and routing signals. For lab equipment, the device can also be reprogrammed through the in-system interface, but production fixtures must include a compatible programming connection, controlled supply rails, and deterministic power-up behavior to avoid unsafe test states.
推薦
Security and Surveillance Control
The XC9572 can implement compact control logic for camera, access, alarm, or recording equipment by combining state-machine logic and I/O buffering in one device. The 72 user I/O pins support multiple sensor inputs and actuator outputs, while the 7.5 ns speed grade provides useful timing margin for sequential control signals. At the system level, the CPLD should not be treated as a cryptographic security boundary. Use it for control and glue functions while implementing authentication, key storage, and sensitive protection in appropriately designed security hardware.
推薦
Board-Level Programmable Glue Logic
The XC9572-7PQG100C is useful for legacy designs that need a compact replacement for several PAL or GAL devices and discrete logic gates. Its 72 macrocells, 1,600 usable gates, and 72 I/O pins provide enough integration to simplify a complex board without introducing a large FPGA footprint. The device retains a deterministic macrocell architecture and supports 5 V in-system programming, making it attractive for field updates. A migration should include library conversion, pin-state review, unused-pin treatment, and timing verification against the new -7 grade.
推薦
推薦產品摘要
工程參考資料,適用於 XC9572-7PQG100C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC9572-5PQG100C | XC9572-10PQG100C | XC9572-10PQG100I | XC9572-7PQ100C | XC9572-10PQ100C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells |
| Usable Gates | 1,600 usable gates | 1,600 usable gates | 1,600 usable gates | 1,600 usable gates | 1,600 usable gates | 1,600 usable gates |
| User I/O Pins | 72 user I/O pins | 72 user I/O pins | 72 user I/O pins | 72 user I/O pins | 72 user I/O pins | 72 user I/O pins |
| Pin-to-Pin Logic Delay | 7.5 ns | 5 ns | 10 ns | 10 ns | 7.5 ns | 10 ns |
| In-System Programming | 5 V in-system programmable | 5 V in-system programmable | 5 V in-system programmable | 5 V in-system programmable | 5 V in-system programmable | 5 V in-system programmable |
主要差異化特點
- Faster timing grade than the -10 replacements (對比XC9572-10PQG100C)
- Commercial-grade ordering with lead-free package construction (對比XC9572-10PQG100I)
- Retains the -7 speed grade in the alternate ordering code (對比XC9572-7PQ100C)
設計說明
Use the AMD DS065 package drawing and pin-description table to create the 100-pin TQFP footprint and assign every signal. Place supply decoupling close to the device power pins, provide a low-impedance ground path, and keep programming access reachable for production test. Do not rely on a generic PQFP footprint without checking the lead pitch, body size, exposed thermal behavior, and pin numbering against the TQFP package outline.
Create timing constraints for every path that uses the 7.5 ns -7 speed grade, including control outputs, registered logic, and external interfaces. The 125 MHz figure is not a blanket guarantee for every board configuration; board delay, I/O loading, clock skew, and external device timing still contribute. Before substituting the -10 or -5 grade, rerun timing analysis because the available timing margin changes even when the footprint remains unchanged.
Do not assume every XC9572 programmer supports every XC9500-family device algorithm. Validate the programmer hardware, cable, driver, software version, and target-device algorithm on a known-good board before production programming. Also inspect the reset and power-up behavior of the assembled PCB so that I/O states remain safe while configuration Flash is being programmed.
Keep sensitive or high-fanout logic connections away from noisy power-stage and switching-node routing, and maintain short return paths for ground. For mixed-signal or industrial boards, isolate the CPLD's ground reference from high-current returns where the system architecture permits it. Treat unused pins and I/O standards according to the manufacturer data sheet rather than assigning them informally, because incorrect unused-pin states can affect power-up behavior or board testing.
合規資訊
The target is identified as lead free and RoHS compliant. REACH, halogen-free status, and conflict-minerals status are not specified.