XCKU035-2FFVA1156E - Kintex UltraScale FPGA | AMD
MPN: XCKU035-2FFVA1156E ✓ Hoạt độngXCKU035-2FFVA1156E Tóm tắt
An FPGA is a programmable semiconductor whose logic, memory, and I/O resources are configured after fabrication. In the product hierarchy, this device belongs to the Kintex UltraScale family of FPGAs and programmable logic devices. FPGAs are used when a design needs parallel operations, adaptable hardware, high throughput, or field-updatable functionality without replacing a fixed-function ASIC or microcontroller.
The XCKU035-2FFVA1156E provides 444,343 logic cells, 19,456,000 RAM bits, and 520 I/O. The -2 ordering code identifies the -2 speed grade, while the 1156-pin FCBGA package supports dense board-level interconnect. The device is manufactured using 20 nm technology and uses a 0.95 V core voltage, positioning it for demanding parallel-processing systems rather than low-cost microcontroller control tasks.
This Kintex UltraScale FPGA can implement parallel algorithms, protocol bridges, data acquisition pipelines, hardware accelerators, and embedded control logic in one device. Its 520 I/O make it especially useful where several high-speed interfaces and substantial external memory connectivity are required. FPGA resources should be mapped according to the AMD Vivado design flow, with timing constraints, clocking, pin placement, and power planning completed before implementation.
Typical uses include high-speed data acquisition, industrial imaging, communications infrastructure, semiconductor test equipment, and embedded signal processing. The large logic and RAM resources allow multiple parallel lanes to operate concurrently, while the extensive I/O count supports memory interfaces and external peripherals. Configuration storage and boot behavior must be designed for the selected UltraScale platform and board configuration.
A critical design consideration is the complexity of a 1156-pin BGA footprint. Escape routing, power-plane segmentation, decoupling, and via-in-pad or via-beneath-array construction must follow the package and board-design guidance. Pin assignment should be driven by the selected board schematic, and differential or high-speed pairs must be routed with controlled length and impedance.
This page consolidates the confirmed device resources, package information, drop-in ordering alternatives, comparison parameters, and practical implementation guidance. It is intended to accelerate component selection and PCB planning for engineers evaluating the XCKU035-2FFVA1156E for high-density Kintex UltraScale implementations.
Bộ thay thế dễ dàng lắp đặt cho XCKU035-2FFVA1156E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XCKU035-2FFVA1156E (cùng hình factor và footprint) — khác nhau ở Package Type, Device Type, Logic Cells, Package, Speed Grade.
XCKU035-3FFVA1156E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU035-2FFVA1156I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU035-1FFVA1156I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU035-1FFVA1156C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU040-2FFVA1156E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU060-2FFVA1156E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU035-2FFVA1156E Tỷ lệ tối đa & tính chất điện
| Device Type | Kintex UltraScale field-programmable gate array (FPGA) |
| Logic Cells | 444,343 cells |
| RAM Bits | 19,456,000 bits |
| Input/Output Count | 520 I/O |
| Logic Blocks | 253,912 LABs/CLBs |
| Process Technology | 20 nm |
| Core Voltage | 0.95 V |
| Package Type | 1156-pin FCBGA |
| Package Name | 1156-BBGA, FCBGA |
| Speed Grade | -2 |
| Series | Kintex UltraScale |
| Programmable Logic | FPGA programmable logic device |
| Kiểu lắp đặt | Surface mount |
| Product Status | Active |
Hướng dẫn cấu hình chân XCKU035-2FFVA1156E 1156-bbga, fcbga
Cấu hình chân cho XCKU035-2FFVA1156E (1156-bbga, fcbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XCKU035-2FFVA1156E.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XCKU035-2FFVA1156E phù hợp cho 6 Áp dụngs: High-Speed Data Acquisition, Industrial Imaging and Vision, Communications Protocol Processing, Semiconductor Test and Instrumentation, Embedded Signal Processing, Industrial Control and Automation.
High-Speed Data Acquisition
The XCKU035-2FFVA1156E fits parallel ADC and digitizer systems requiring substantial logic, RAM, and external connectivity. Its 444,343 logic cells can support multiple concurrent conversion pipelines, digital filtering, calibration, and data packing, while 19,456,000 RAM bits can buffer incoming samples. The 520 I/O provide extensive connections for clocks, triggers, parallel buses, status signals, and external memory. Place acquisition interfaces according to the AMD package pinout, constrain all clocking paths, and use Vivado timing analysis to verify the implemented data paths.
Được đề xuất
Industrial Imaging and Vision
The XCKU035-2FFVA1156E is well suited to industrial camera and machine-vision systems that combine image acquisition with real-time processing. Parallel logic resources can execute pixel pipelines, thresholding, feature detection, and compression stages concurrently, and the 19,456,000 RAM bits can support line and frame buffers. With 520 I/O, the device accommodates multiple cameras, sensors, trigger inputs, and high-speed outputs. Validate electrical standards through PCB constraint work and confirm the timing grade against the selected I/O and external interface requirements.
Được đề xuất
Communications Protocol Processing
The XCKU035-2FFVA1156E can implement multiple high-throughput communication paths in parallel using programmable logic, block RAM, and dedicated I/O. Suitable functions include packet classification, bridging, aggregation, test-sequence generation, and custom link-layer termination. Its 444,343 logic cells allow separate protocol engines to operate concurrently instead of forcing sequential handling in a microcontroller or DSP. The 1156-pin FCBGA also supports substantial board-level connectivity, although pin placement, bank power, clocking, and high-speed signal integrity must be engineered against the final board design.
Được đề xuất
Semiconductor Test and Instrumentation
For semiconductor test, measurement, and instrumentation equipment, the XCKU035-2FFVA1156E can combine timing control, pattern generation, capture, analysis, and communications in one programmable device. Its large logic-cell count supports parallel channels, while the 19,456,000 RAM bits support stimulus patterns, captured data, and intermediate processing buffers. The 520 I/O provide extensive connections to test fixtures and instruments. Engineers should use bank-specific I/O standards, synchronize acquisition clocks, and reserve routing resources for measurement accuracy and repeatable timing behavior.
Được đề xuất
Embedded Signal Processing
The XCKU035-2FFVA1156E is appropriate for configurable DSP, filtering, modulation, and real-time analysis systems that benefit from parallel implementation. Fixed arithmetic blocks and programmable logic can execute multiple channels simultaneously, with the 19,456,000 RAM bits supporting coefficient storage and sample buffering. Its 520 I/O supports converters, memory, clocks, and control signals across a complex instrument. Confirm arithmetic and memory timing in Vivado, maintain deterministic clocking, and use the AMD data sheet to select compatible I/O standards and power configurations.
Được đề xuất
Industrial Control and Automation
The XCKU035-2FFVA1156E can support industrial controllers that combine deterministic I/O, parallel control logic, motion sequencing, safety monitoring, and communications in one FPGA. Its 444,343 logic cells allow redundant control paths and complex state machines, while the large RAM budget supports diagnostics and trace data. The 520 I/O make the device practical for machines with numerous sensors, actuators, encoders, and fieldbus interfaces. Confirm the exact temperature and qualification requirements, implement clock-domain crossings deliberately, and validate every external interface during hardware bring-up.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XCKU035-2FFVA1156E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XCKU035-3FFVA1156E | XCKU035-2FFVA1156I | XCKU035-1FFVA1156I | XCKU040-2FFVA1156E | XCKU060-2FFVA1156E |
|---|---|---|---|---|---|---|
| Package | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm |
| Speed Grade | -2 | -3 | -2 | -1 | -2 | -2 |
| Core Voltage | 0.95 V | 0.95 V | 0.95 V | 0.95 V | 0.95 V | 0.95 V |
Bảo phân biệt quan trọng
- Closer resource match than larger Kintex UltraScale devices (vsXCKU060-2FFVA1156E)
- Higher speed-grade option with the same package format (vsXCKU035-3FFVA1156E)
- Direct same-speed ordering alternative (vsXCKU035-2FFVA1156I)
Ghi chú thiết kế
Treat the 1156-pin FCBGA as a high-density routing problem. Follow the AMD package drawing and UG575 when defining pad stackups, fanout, escape traces, and power connections. Use a validated PCB stackup and verify every power and ground ball against the official package files. Inspect finished boards with X-ray because hidden solder-joint defects beneath the component are not visible through ordinary optical inspection.
Plan power delivery by the device's supported I/O banks and internal core requirements rather than treating all 0.95 V and I/O supplies as one rail. Place decoupling capacitors directly at the appropriate package balls, keep high-current paths short, and separate sensitive planes where required. Confirm regulator capacity, sequencing, ramp behavior, and power estimation from the final Vivado report before releasing the board for fabrication.
Use Vivado constraints and the PCB stackup to model clocks, high-speed I/O, and external memory interfaces. Match trace lengths to the selected interface and package requirements, maintain impedance continuity through layer transitions, and avoid splits or stubs in reference planes. Do not rely only on logical pin placement: the physical implementation must be reviewed against the timing and signal-integrity reports produced for the actual board.
Thông tin tuân thủ
The comparison references mention RoHS and REACH information, but an explicit compliance declaration for the exact XCKU035-2FFVA1156E ordering code was not established. Confirm compliance and qualification documentation before production release.