XC7A200T-2FFG1156C 215K Artix-7 FPGA | AMD | Industrial
MPN: XC7A200T-2FFG1156C ✓ Hoạt độngXC7A200T-2FFG1156C Tóm tắt
A field-programmable gate array is a semiconductor whose digital logic and interconnect are configured after fabrication. Within the product hierarchy, an FPGA is a programmable-logic device, an integrated circuit, and a semiconductor. Unlike a fixed application-specific integrated circuit, an Artix-7 FPGA combines programmable logic blocks, block RAM, digital signal-processing resources, programmable I/O, and serial transceivers on one device, allowing board-level designs to be revised without changing the PCB.
The XC7A200T-2FFG1156C provides 16,825 logic cells identified as LAB/CLB resources, 500 user I/O, 740 DSP48E1 slices, and four GTP transceivers. Its 13,455,360 RAM bits provide distributed and block-memory capacity for packet buffering, data acquisition, image processing, and embedded control logic. The large I/O count supports interfaces to external memory, converters, displays, and high-speed parallel peripherals.
The -2 speed designation identifies the device's performance grade within the Artix-7 family, while the C suffix identifies its temperature and product-grade classification. The FFG1156 package is a 1156-ball flip-chip BGA intended for dense multilayer PCB layouts. Because the package has a large ball count and fine pitch, escape routing, via-in-pad use, solder-mask design, and thermal-via placement require careful PCB planning. Pin assignments, differential-pair rules, and power-plane connectivity should be taken directly from the AMD package pinout files.
Typical uses include industrial control and data acquisition, high-throughput digital filtering, robotics, embedded vision, communications infrastructure, and prototype systems requiring substantial parallel logic. The four GTP transceivers also allow serial links to be integrated alongside DSP pipelines and general-purpose programmable logic. Designs must account for configuration memory, startup sequencing, clocking, decoupling, and the finite I/O and transceiver resources of the selected device.
A primary design consideration is power and thermal integrity across the FCBGA. Follow the AMD Artix-7 reference schematic and package power requirements, provide continuous low-impedance power planes, place decoupling capacitors close to the relevant supply balls, and implement a thermal strategy appropriate to the board stack-up. High-speed serial interfaces should follow the AMD pinout and reference-design constraints to preserve signal integrity.
This product overview combines the device's key resource counts, pin-package considerations, drop-in upgrade options, practical design guidance, and application guidance. It is intended to help engineers determine whether the Artix-7 architecture, package density, and performance grade fit a design before moving into device configuration and board implementation.
Bộ thay thế dễ dàng lắp đặt cho XC7A200T-2FFG1156C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7A200T-2FFG1156C (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Speed Grade, Logic Cells, Block RAM.
XC7A200T-2FFG1156I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A200T-1FFG1156C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7A200T-1FFG1156I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7A200T-3FFG1156C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7A200T-3FFG1156E
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC7A200T-2FFG1156C Tỷ lệ tối đa & tính chất điện
| FPGA Family | Artix-7 |
| Logic Cells | 215,360 cells |
| LAB/CLB Count | 16,825 LAB/CLBs |
| Total RAM Bits | 13,455,360 bits |
| DSP48E1 Slices | 740 slices |
| GTP Transceivers | 4 transceivers |
| User I/O | 500 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Speed Grade | -2 |
| Device Type | Field Programmable Gate Array |
| Hộp | 1156-pin FCBGA |
| Package Family | BGA family |
| Kiểu lắp đặt | Surface mount |
| Programmable Logic | 215,360-cell FPGA |
| Block Memory | 13,455,360 RAM bits |
| Transceiver Count | 4 GTP high-speed transceivers |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
Hướng dẫn cấu hình chân XC7A200T-2FFG1156C bga family
Cấu hình chân cho XC7A200T-2FFG1156C (bga family gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7A200T-2FFG1156C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7A200T-2FFG1156C phù hợp cho 6 Áp dụngs: Industrial Control Systems, High-Speed Data Acquisition, Digital Signal Processing, Robotics and Automation, Communications and Network Interfaces, Embedded Vision and Image Processing.
Industrial Control Systems
The XC7A200T-2FFG1156C fits industrial controllers that combine parallel machine I/O, sequencing logic, motion-related arithmetic, and communications. Its 500 user I/O provide ample connections for sensors, actuators, encoders, and discrete control signals, while 740 DSP48E1 slices support filtering and motion-control calculations. The 13,455,360 RAM bits can buffer acquired or processed data without relying entirely on external memory. Use the 1156-pin FCBGA footprint, AMD reference schematic, and package pinout files to establish power, configuration, clocking, and signal-integrity connections.
Được đề xuất
High-Speed Data Acquisition
The XC7A200T-2FFG1156C is suitable for parallel data-acquisition systems requiring simultaneous sampling logic, digital filtering, buffering, and control in one FPGA. The 215,360 logic cells can implement acquisition pipelines, the 13,455,360 RAM bits provide on-chip storage, and the 740 DSP48E1 slices accelerate multiply-accumulate operations. A 500-I/O interface can connect directly to high-channel-count converters and custom capture logic. The design must preserve converter edge timing through careful clock routing and account for the thermal and escape-routing demands of the 1156-ball FCBGA.
Được đề xuất
Digital Signal Processing
The XC7A200T-2FFG1156C supports DSP-intensive processing because its 740 DSP48E1 slices can perform parallel fixed-point arithmetic. Engineers can use the slices for filters, transforms, modulation, error correction, or real-time signal analysis while programmable logic handles control, interfaces, and buffering. Its 13,455,360 RAM bits reduce pressure on external memory, and 500 I/O permits wide parallel data paths. Clock-domain crossings, DSP48 pipeline timing, and resource sharing should be checked in the AMD implementation flow because parallel throughput depends on the selected clocking and pipelining scheme.
Được đề xuất
Robotics and Automation
The XC7A200T-2FFG1156C suits robot and factory-automation controllers that need deterministic control, sensor fusion, and numerous peripheral connections. Its programmable logic can coordinate motion sequences, the DSP slices can accelerate filtering and feedback calculations, and the 500 I/O can support encoders, safety signals, and actuator drivers. Four GTP transceivers provide optional high-speed links for cameras, remote I/O, or expansion modules. The implementation should separate timing-critical routes, use the Artix-7 reference schematic for power startup, and validate thermal performance across the full industrial operating environment.
Được đề xuất
Communications and Network Interfaces
The XC7A200T-2FFG1156C can implement high-throughput communications and packet-processing functions by combining 215,360 logic cells with four GTP transceivers. The programmable resources support framing, buffering, state machines, and protocol handling, while the transceivers provide high-speed serial connectivity. Its 13,455,360 RAM bits can hold packet queues and timing buffers, and 500 I/O supports parallel PHY or fabric interfaces. Designers should use the package-specific differential-pair assignments, maintain continuous reference-clock routing, and validate channel performance against the applicable GTP interface requirements.
Được đề xuất
Embedded Vision and Image Processing
The XC7A200T-2FFG1156C supports embedded vision preprocessing when a design needs parallel pixel pipelines, substantial look-up or line storage, and multiple external interfaces. The 740 DSP48E1 slices can accelerate filtering and arithmetic, the 215,360 logic cells can manage frame timing and control, and the 500 I/O can connect cameras, memory, and display interfaces. Four GTP transceivers may also carry compressed or serialized video data. Clock budgeting, DDR memory timing, and output-display timing are critical because image throughput can consume resources quickly in the 1156-pin FCBGA implementation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7A200T-2FFG1156C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7A200T-2FFG1156I | XC7A200T-1FFG1156C | XC7A200T-1FFG1156I | XC7A200T-3FFG1156C | XC7A200T-3FFG1156E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA | 1156-pin FCBGA |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -2 | -2 | -1 | -1 | -3 | -3 |
| Suffix Classification | C | I | C | I | C | E |
Bảo phân biệt quan trọng
- Large FPGA resource set in a 1156-pin package (vsXC7A200T-2FBG676I)
- Higher -2 performance classification (vsXC7A200T-1FFG1156C)
- Integrated DSP and serial connectivity (vsXC4VLX60-11FFG668C)
- C-suffix configuration retained for drop-in alternatives (vsXC7A200T-1FFG1156I)
Ghi chú thiết kế
Build the FFG1156 power tree from the AMD Artix-7 reference schematic and the exact package power ball list. Separate core, auxiliary, I/O, and transceiver rails where the device requires independent regulation, and assign the appropriate decoupling network directly at the supply balls. The published 1 V value describes the core supply; it should not be interpreted as the voltage required by every power ball. Verify startup sequencing, voltage tolerances, current capacity, and rail enable behavior against the manufacturer datasheet.
Treat the 1156-pin FCBGA as a thermally demanding surface-mount package. Provide uninterrupted copper planes beneath the device, a balanced via field beneath the BGA, and a stack-up with sufficient thermal conductivity. Estimate worst-case junction temperature from actual FPGA power, board thermal resistance, copper area, airflow, and ambient temperature rather than using a generic package rating. Sparse via stitching can create hot spots even when average board temperature appears acceptable.
Use the AMD XC7A200T FFG1156 package files to assign every ball before routing. Maintain the required ball-pad and via geometry for the selected manufacturing process, and avoid changing escape-routing topology between PCB revisions without checking current and assembly requirements. Place configuration, clock, decoupling, and programming-access components in accordance with the reference schematic. Because this package has 1,156 balls, small routing errors can affect power integrity or make the board unmanufacturable.
Apply package-specific differential-pair and series-resistance rules to every high-speed GTP interface. Keep transceiver supply filtering, reference clock routing, and auxiliary circuitry close to the relevant device balls, and avoid stubs or unnecessary layer transitions. Validate the complete channel through PCB design rules and post-layout simulation rather than assuming that identical package pins guarantee identical signal performance. Changes in layer stack-up or reference-plane geometry can materially alter a high-speed link.
Do not substitute a smaller FBG676 or SBG484 package for the FFG1156 device: both the land pattern and available I/O count differ. Likewise, do not treat a change from -2 to -1 or -3 as a transparent substitution without rerunning timing analysis at the intended clock frequencies. Confirm the C, I, or E suffix against the product's environmental requirements, and verify that the replacement bitstream is supported by the selected device and speed grade.
Thông tin tuân thủ
The available comparison material references RoHS and REACH fields for related FFG1156 variants but does not expose a definitive declaration for XC7A200T-2FFG1156C. AEC-Q100, lead-free, halogen-free, and conflict-minerals status require the current manufacturer compliance documentation.