XCKU11P-3FFVD900E - Kintex UltraScale+ 408-I/O FPGA | AMD
MPN: XCKU11P-3FFVD900E ✓ Hoạt độngXCKU11P-3FFVD900E Tóm tắt
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. An FPGA sits between fixed-function logic and a software-defined processor: it provides deterministic parallel hardware, extensive I/O, and adaptable signal processing while avoiding the design cycle of a custom ASIC. The Kintex UltraScale+ family combines advanced programmable logic with integrated hard blocks optimized for high-speed I/O, networking, signal processing, and accelerator workloads.
The XCKU11P-3FFVD900E provides 408 I/O positions and uses 900-ball surface-mount packaging. Its -3 suffix identifies the device performance grade, allowing engineers to distinguish it from the faster -1 and -2 versions. The 900-BBGA package exposes a large number of connections, making careful ball-assignment review, power planning, and PCB layout essential for reliable implementation.
The Kintex UltraScale+ architecture is designed for designs requiring substantial parallel processing and flexible interface adaptation. Its combination of programmable logic and dedicated hardware blocks can shorten development cycles compared with an ASIC while preserving the timing predictability and parallel throughput expected from FPGA-based systems. Exact logic-cell, transceiver, memory, and performance details should be taken from the device-specific AMD documentation for the selected package and grade.
Typical uses include high-speed data acquisition, industrial control, communications infrastructure, radar and signal processing, video and imaging systems, and prototype platforms. Because the package contains 900 terminals, the design also depends on multilayer PCB construction, adequate power delivery, and signal-integrity control across demanding high-speed interfaces.
The principal engineering consideration is migration discipline. FPGA pinouts, power rails, configuration resources, and selected I/O standards are tightly coupled to the exact device orderable number. Before schematic sign-off, compare the complete bill of materials, package ball files, speed grade, temperature grade, and supported I/O standards against the AMD pinout and design documentation.
This page combines device identity, package and I/O information, searchable ordering details, compatible same-brand alternatives, and practical design guidance. It is structured to help engineers distinguish speed and temperature variants without assuming that differently suffixed Kintex UltraScale+ devices are interchangeable in every design.
Bộ thay thế dễ dàng lắp đặt cho XCKU11P-3FFVD900E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XCKU11P-3FFVD900E (cùng hình factor và footprint) — khác nhau ở Device Type.
XCKU11P-1FFVD900E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU11P-2FFVD900E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU11P-L2FFVD900E
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XCKU11P-2FFVD900I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XCKU11P-3FFVD900I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XCKU11P-3FFVD900E Tỷ lệ tối đa & tính chất điện
| Device Type | Kintex UltraScale+ field-programmable gate array (FPGA) |
| Number of I/O Positions | 408 I/O |
| Number of Terminals | 900 terminals |
| Hộp | 900-BBGA FCBGA |
| Package Shape | Square |
| Terminal Form | Ball |
| Performance Grade | -3 grade |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | EU RoHS Compliant |
| REACH Status | REACH Compliant |
Hướng dẫn cấu hình chân XCKU11P-3FFVD900E square
Cấu hình chân cho XCKU11P-3FFVD900E (square gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XCKU11P-3FFVD900E.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XCKU11P-3FFVD900E phù hợp cho 6 Áp dụngs: Industrial Control Systems, High-Speed Data Acquisition, Communications Infrastructure, Radar and Signal Processing, Video and Imaging Systems, Aerospace and Defense Prototyping.
Industrial Control Systems
The AMD XCKU11P-3FFVD900E fits industrial controllers requiring deterministic parallel logic and a high density of programmable connections. Its 408 I/O positions can support digital sensors, machine controls, actuator interfaces, and communication logic, while the 900-BBGA FCBGA package provides the physical interconnect capacity required by a complex controller. The -3 grade must be checked against acquisition timing, control-loop latency, and external interface timing. Engineers should review the exact package power rails, I/O standards, and temperature grade in the AMD documentation before schematic release, and should reserve routing and power-distribution resources for all 900 package balls.
Được đề xuất
High-Speed Data Acquisition
The AMD XCKU11P-3FFVD900E is suitable for parallel data-acquisition systems where multiple channels must be sampled, filtered, and processed with predictable hardware timing. The device's 408 I/O positions provide substantial connectivity to converters, parallel buses, memory interfaces, and synchronization logic, while the Kintex UltraScale+ architecture supports parallel signal-processing workflows. For a new board, confirm required transceiver resources, I/O voltage standards, clocking resources, and conversion latency for the selected -3 speed grade. Layout should separate sensitive acquisition routes from high-speed fabric and power distribution, and timing closure must be repeated for every FFVD900E package variant.
Được đề xuất
Communications Infrastructure
The AMD XCKU11P-3FFVD900E can be evaluated for communications equipment that needs adaptable packet-processing logic, parallel interfaces, and high-speed I/O density. Its 408 I/O positions can support control-plane processing, backplane connections, status interfaces, and external memory or network components within a Kintex UltraScale+ design. The -3 grade should be selected only after static timing analysis confirms adequate setup and hold margins at the intended clock rates. Engineers must also verify the required transceiver count, reference clocks, lane rates, and supported I/O standards. A 900-BBGA implementation needs a multilayer PCB with careful power-plane zoning, via distribution, and package-specific ball-reference controls.
Được đề xuất
Radar and Signal Processing
The AMD XCKU11P-3FFVD900E is suitable for radar, test, and signal-processing prototypes that combine configurable logic with numerous external data paths. The 408-I/O device can connect to converters, memory, timing references, and processing resources while Kintex UltraScale+ programmable logic supports parallel algorithms and adaptive filtering. For mission-critical use, confirm the operating temperature grade, radiation or reliability requirements, clock accuracy, and long-term availability separately from the functional FPGA selection. The -3 grade may support the design only if all timing constraints pass at production clock targets. PCB work should include controlled-impedance routing, return-path continuity, and thermal analysis around the large FCBGA package.
Được đề xuất
Video and Imaging Systems
The AMD XCKU11P-3FFVD900E can support parallel video and imaging systems where pixel data must move through configurable pipelines with substantial external connectivity. Its 408 I/O positions are useful for parallel sensor interfaces, display timing, capture control, and test instrumentation, while the programmable fabric enables pipelines that can be adapted as image formats or resolution requirements evolve. Designers should verify supported I/O standards, data-rate support, memory resources, and timing margin for the -3 grade. The 900-BBGA package requires exact AMD ball mapping and manufacturing-aware escape routing. Thermal and power verification are essential because long image-processing workloads can sustain high utilization across programmable logic and memory resources.
Được đề xuất
Aerospace and Defense Prototyping
The AMD XCKU11P-3FFVD900E is a candidate for aerospace, defense, and high-reliability prototyping systems that need configurable logic, extensive I/O, and FPGA-based design flexibility. Its -3 performance grade, 408 I/O positions, and 900-BBGA package provide a platform for parallel processing, sensor fusion, communications, and test functions. However, the exact temperature grade, radiation qualification, screening level, security requirements, and long-term lifecycle commitments must be established from the appropriate AMD product documentation. A grade change alone does not establish equivalence for a qualified flight program. Layout, power, clocking, and configuration-security reviews should be performed as separate engineering gates before the device is used in a safety-critical or export-controlled design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XCKU11P-3FFVD900E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XCKU11P-1FFVD900E | XCKU11P-2FFVD900E | XCKU11P-L2FFVD900E | XCKU11P-2FFVD900I | XCKU11P-3FFVD900I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 900-BBGA FCBGA | 900-BBGA FCBGA | 900-BBGA FCBGA | 900-BBGA FCBGA | 900-BBGA FCBGA | 900-BBGA FCBGA |
| Device Family | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ |
| Performance Grade | -3 | -1 | -2 | L2 | -2I | -3I |
Bảo phân biệt quan trọng
- Lower performance grade within the same 900-BBGA device family (vsXCKU11P-1FFVD900E)
- Package-compatible option one grade faster (vsXCKU11P-2FFVD900E)
- Industrial suffix option preserving the -3 speed designation (vsXCKU11P-3FFVD900I)
Ghi chú thiết kế
Treat the 900-BBGA FCBGA as a package-specific PCB-design problem rather than a generic large BGA. Assign every ball from the FFVD900E AMD package file, reserve escape-routing channels for configuration and dedicated pins, and preserve the documented power and ground ball groupings. Review ball-map changes between engineering samples and production revisions before releasing fabrication data. Controlled-impedance routing, via-in-pad construction, solder-mask design, and component placement should follow the package-specific assembly guidance.
Create a complete power tree for the core, I/O, auxiliary, and configuration rails identified in the exact device documentation. Verify source voltage, tolerance, sequencing, current capacity, decoupling, and startup behavior for the selected FFVD900E grade. Estimated power should be calculated from the actual design utilization and activity factor rather than a single device-wide maximum. A 900-BBGA design also needs low-impedance power distribution and local high-frequency decoupling close to the package.
Estimate junction temperature from board-specific power dissipation and the thermal model for the actual PCB stackup, copper area, airflow, and heat-spreading components. The 900-BBGA footprint can expose the FPGA to thermal gradients that differ across the package. Use the highest expected operating mode, adjacent-board heat sources, and the required ambient range when checking thermal margins. Validate early with a thermal camera or equivalent test because package temperature alone does not establish junction-temperature margin.
Do not treat speed-grade, industrial-temperature, or extended-temperature suffixes as cosmetic changes. The -1, -2, and -3 grades can alter timing performance, while L2 and I designations affect environmental or qualification requirements. A mechanically compatible 900-BBGA alternative still requires new static timing analysis, power review, temperature assessment, and configuration check. Verify the complete orderable number in the bill of materials and avoid silent substitutions during procurement.
Thông tin tuân thủ
EU RoHS and REACH compliance are identified for the L2FFVD900E family listing. Automotive qualification, lead-free status, halogen-free status, and conflict-minerals status for the exact XCKU11P-3FFVD900E are unknown.