XCKU11P-3FFVD900E - Kintex UltraScale+ 408-I/O FPGA | AMD
N.º de pieza: XCKU11P-3FFVD900E ✓ ActivoXCKU11P-3FFVD900E Descripción general
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. An FPGA sits between fixed-function logic and a software-defined processor: it provides deterministic parallel hardware, extensive I/O, and adaptable signal processing while avoiding the design cycle of a custom ASIC. The Kintex UltraScale+ family combines advanced programmable logic with integrated hard blocks optimized for high-speed I/O, networking, signal processing, and accelerator workloads.
The XCKU11P-3FFVD900E provides 408 I/O positions and uses 900-ball surface-mount packaging. Its -3 suffix identifies the device performance grade, allowing engineers to distinguish it from the faster -1 and -2 versions. The 900-BBGA package exposes a large number of connections, making careful ball-assignment review, power planning, and PCB layout essential for reliable implementation.
The Kintex UltraScale+ architecture is designed for designs requiring substantial parallel processing and flexible interface adaptation. Its combination of programmable logic and dedicated hardware blocks can shorten development cycles compared with an ASIC while preserving the timing predictability and parallel throughput expected from FPGA-based systems. Exact logic-cell, transceiver, memory, and performance details should be taken from the device-specific AMD documentation for the selected package and grade.
Typical uses include high-speed data acquisition, industrial control, communications infrastructure, radar and signal processing, video and imaging systems, and prototype platforms. Because the package contains 900 terminals, the design also depends on multilayer PCB construction, adequate power delivery, and signal-integrity control across demanding high-speed interfaces.
The principal engineering consideration is migration discipline. FPGA pinouts, power rails, configuration resources, and selected I/O standards are tightly coupled to the exact device orderable number. Before schematic sign-off, compare the complete bill of materials, package ball files, speed grade, temperature grade, and supported I/O standards against the AMD pinout and design documentation.
This page combines device identity, package and I/O information, searchable ordering details, compatible same-brand alternatives, and practical design guidance. It is structured to help engineers distinguish speed and temperature variants without assuming that differently suffixed Kintex UltraScale+ devices are interchangeable in every design.
Alternativas directas para XCKU11P-3FFVD900E — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XCKU11P-3FFVD900E (mismo factor de forma y huella) — difiere en Device Type.
XCKU11P-1FFVD900E
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XCKU11P-2FFVD900E
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XCKU11P-L2FFVD900E
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XCKU11P-2FFVD900I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XCKU11P-3FFVD900I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XCKU11P-3FFVD900E Valores máximos y características eléctricas
| Device Type | Kintex UltraScale+ field-programmable gate array (FPGA) |
| Number of I/O Positions | 408 I/O |
| Number of Terminals | 900 terminals |
| Encapsulado | 900-BBGA FCBGA |
| Package Shape | Square |
| Terminal Form | Ball |
| Performance Grade | -3 grade |
| Tipo de montaje | Surface mount |
| Estado RoHS | EU RoHS Compliant |
| REACH Status | REACH Compliant |
Guía de configuración de pines de XCKU11P-3FFVD900E square
Configuración de pines para XCKU11P-3FFVD900E (encapsulado square). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XCKU11P-3FFVD900E.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XCKU11P-3FFVD900E es adecuado para 6 aplicacións: Industrial Control Systems, High-Speed Data Acquisition, Communications Infrastructure, Radar and Signal Processing, Video and Imaging Systems, Aerospace and Defense Prototyping.
Industrial Control Systems
The AMD XCKU11P-3FFVD900E fits industrial controllers requiring deterministic parallel logic and a high density of programmable connections. Its 408 I/O positions can support digital sensors, machine controls, actuator interfaces, and communication logic, while the 900-BBGA FCBGA package provides the physical interconnect capacity required by a complex controller. The -3 grade must be checked against acquisition timing, control-loop latency, and external interface timing. Engineers should review the exact package power rails, I/O standards, and temperature grade in the AMD documentation before schematic release, and should reserve routing and power-distribution resources for all 900 package balls.
Recomendado
High-Speed Data Acquisition
The AMD XCKU11P-3FFVD900E is suitable for parallel data-acquisition systems where multiple channels must be sampled, filtered, and processed with predictable hardware timing. The device's 408 I/O positions provide substantial connectivity to converters, parallel buses, memory interfaces, and synchronization logic, while the Kintex UltraScale+ architecture supports parallel signal-processing workflows. For a new board, confirm required transceiver resources, I/O voltage standards, clocking resources, and conversion latency for the selected -3 speed grade. Layout should separate sensitive acquisition routes from high-speed fabric and power distribution, and timing closure must be repeated for every FFVD900E package variant.
Recomendado
Communications Infrastructure
The AMD XCKU11P-3FFVD900E can be evaluated for communications equipment that needs adaptable packet-processing logic, parallel interfaces, and high-speed I/O density. Its 408 I/O positions can support control-plane processing, backplane connections, status interfaces, and external memory or network components within a Kintex UltraScale+ design. The -3 grade should be selected only after static timing analysis confirms adequate setup and hold margins at the intended clock rates. Engineers must also verify the required transceiver count, reference clocks, lane rates, and supported I/O standards. A 900-BBGA implementation needs a multilayer PCB with careful power-plane zoning, via distribution, and package-specific ball-reference controls.
Recomendado
Radar and Signal Processing
The AMD XCKU11P-3FFVD900E is suitable for radar, test, and signal-processing prototypes that combine configurable logic with numerous external data paths. The 408-I/O device can connect to converters, memory, timing references, and processing resources while Kintex UltraScale+ programmable logic supports parallel algorithms and adaptive filtering. For mission-critical use, confirm the operating temperature grade, radiation or reliability requirements, clock accuracy, and long-term availability separately from the functional FPGA selection. The -3 grade may support the design only if all timing constraints pass at production clock targets. PCB work should include controlled-impedance routing, return-path continuity, and thermal analysis around the large FCBGA package.
Recomendado
Video and Imaging Systems
The AMD XCKU11P-3FFVD900E can support parallel video and imaging systems where pixel data must move through configurable pipelines with substantial external connectivity. Its 408 I/O positions are useful for parallel sensor interfaces, display timing, capture control, and test instrumentation, while the programmable fabric enables pipelines that can be adapted as image formats or resolution requirements evolve. Designers should verify supported I/O standards, data-rate support, memory resources, and timing margin for the -3 grade. The 900-BBGA package requires exact AMD ball mapping and manufacturing-aware escape routing. Thermal and power verification are essential because long image-processing workloads can sustain high utilization across programmable logic and memory resources.
Recomendado
Aerospace and Defense Prototyping
The AMD XCKU11P-3FFVD900E is a candidate for aerospace, defense, and high-reliability prototyping systems that need configurable logic, extensive I/O, and FPGA-based design flexibility. Its -3 performance grade, 408 I/O positions, and 900-BBGA package provide a platform for parallel processing, sensor fusion, communications, and test functions. However, the exact temperature grade, radiation qualification, screening level, security requirements, and long-term lifecycle commitments must be established from the appropriate AMD product documentation. A grade change alone does not establish equivalence for a qualified flight program. Layout, power, clocking, and configuration-security reviews should be performed as separate engineering gates before the device is used in a safety-critical or export-controlled design.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XCKU11P-3FFVD900E — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XCKU11P-1FFVD900E | XCKU11P-2FFVD900E | XCKU11P-L2FFVD900E | XCKU11P-2FFVD900I | XCKU11P-3FFVD900I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 900-BBGA FCBGA | 900-BBGA FCBGA | 900-BBGA FCBGA | 900-BBGA FCBGA | 900-BBGA FCBGA | 900-BBGA FCBGA |
| Device Family | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ |
| Performance Grade | -3 | -1 | -2 | L2 | -2I | -3I |
Diferenciadores clave
- Lower performance grade within the same 900-BBGA device family (frente a XCKU11P-1FFVD900E)
- Package-compatible option one grade faster (frente a XCKU11P-2FFVD900E)
- Industrial suffix option preserving the -3 speed designation (frente a XCKU11P-3FFVD900I)
Notas de diseño
Treat the 900-BBGA FCBGA as a package-specific PCB-design problem rather than a generic large BGA. Assign every ball from the FFVD900E AMD package file, reserve escape-routing channels for configuration and dedicated pins, and preserve the documented power and ground ball groupings. Review ball-map changes between engineering samples and production revisions before releasing fabrication data. Controlled-impedance routing, via-in-pad construction, solder-mask design, and component placement should follow the package-specific assembly guidance.
Create a complete power tree for the core, I/O, auxiliary, and configuration rails identified in the exact device documentation. Verify source voltage, tolerance, sequencing, current capacity, decoupling, and startup behavior for the selected FFVD900E grade. Estimated power should be calculated from the actual design utilization and activity factor rather than a single device-wide maximum. A 900-BBGA design also needs low-impedance power distribution and local high-frequency decoupling close to the package.
Estimate junction temperature from board-specific power dissipation and the thermal model for the actual PCB stackup, copper area, airflow, and heat-spreading components. The 900-BBGA footprint can expose the FPGA to thermal gradients that differ across the package. Use the highest expected operating mode, adjacent-board heat sources, and the required ambient range when checking thermal margins. Validate early with a thermal camera or equivalent test because package temperature alone does not establish junction-temperature margin.
Do not treat speed-grade, industrial-temperature, or extended-temperature suffixes as cosmetic changes. The -1, -2, and -3 grades can alter timing performance, while L2 and I designations affect environmental or qualification requirements. A mechanically compatible 900-BBGA alternative still requires new static timing analysis, power review, temperature assessment, and configuration check. Verify the complete orderable number in the bill of materials and avoid silent substitutions during procurement.
Información de cumplimiento
EU RoHS and REACH compliance are identified for the L2FFVD900E family listing. Automotive qualification, lead-free status, halogen-free status, and conflict-minerals status for the exact XCKU11P-3FFVD900E are unknown.