XMC1302Q024F0064ABXUMA1 - 32MHz 64KB MCU | Infineon
MPN: XMC1302Q024F0064ABXUMA1 ✓ Hoạt độngXMC1302Q024F0064ABXUMA1 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one integrated circuit. The ARM Cortex-M0 processor architecture follows the hierarchy MCU → microcontroller → embedded processor → semiconductor. It is designed for compact control systems that execute firmware, acquire analog or digital inputs, control outputs, and communicate with external equipment. The XMC1302 family targets industrial applications where mixed-signal control and connectivity are required within a small board area.
Key features include a 32 MHz operating frequency, single-core ARM Cortex-M0 architecture, 64 KB flash organized as 64K x 8, and 16 KB SRAM. The 24-pin PG-VQFN-24-19 package supports surface-mount assembly, while the industrial ordering designation identifies the device as an industrial XMC1300 variant. These resources support event-driven control loops, parameter monitoring, communication gateways, and compact embedded controllers.
The XMC1302-Q024 device family is centered on a 32-bit Cortex-M0 processing core and operates from 3.3 V or 5 V system rails. Its mixed-signal acquisition capability allows software to monitor physical inputs without requiring a separate high-resolution converter in many designs. Multi-protocol serial connectivity supports integration with sensors, actuators, industrial nodes, and service interfaces while preserving a compact 24-pin footprint.
Typical uses include industrial sensor controllers, building automation modules, actuator-control boards, connected industrial equipment, and compact embedded monitoring systems. Engineers can use the 16 KB SRAM for working state and communication buffers, while the 64 KB flash stores application firmware, configuration data, and boot code. The 32 MHz operating rate provides deterministic task scheduling for protocols and control logic.
When laying out a design, reserve a dedicated ground reference for the exposed pad and follow the package-specific land-pattern and thermal-via requirements in the Infineon datasheet. Confirm the supported voltage range, peripheral availability, pin multiplexing, and programming configuration for the exact ordering code before releasing the PCB.
This page combines the manufacturer's XMC1302-Q024 device information with package-aware selection guidance, verified ordering alternatives, and practical design context. It helps engineers identify whether the 32 MHz Cortex-M0 architecture, 64 KB flash, 16 KB SRAM, and PG-VQFN-24-19 package align with an industrial embedded-control design.
Bộ thay thế dễ dàng lắp đặt cho XMC1302Q024F0064ABXUMA1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
XMC1302-Q024X0064-AB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XMC1302Q024F0064ABXUMA1 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit industrial microcontroller |
| Manufacturer | Infineon Technologies |
| Processor Core | ARM Cortex-M0 |
| CPU Architecture | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Core Count | 1 core |
| Embedded Flash Memory | 64 KB (64K x 8) |
| Static RAM | 16 KB |
| Series | XMC1000 |
| Device Family | XMC1300 |
| Supply Voltage Options | 3.3 V or 5 V |
| Hộp | PG-VQFN-24-19 |
| Total Pin Count | 24 pins |
| Kiểu lắp đặt | Surface mount |
| Mixed-Signal Acquisition | Supported |
| Serial Connectivity | Multi-protocol serial connectivity |
| Industrial Qualification | Industrial device |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân XMC1302Q024F0064ABXUMA1 pg-vqfn-24-19
Cấu hình chân cho XMC1302Q024F0064ABXUMA1 (pg-vqfn-24-19 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XMC1302Q024F0064ABXUMA1.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XMC1302Q024F0064ABXUMA1 phù hợp cho 6 Áp dụngs: Industrial Sensor Controller, Building Automation Module, Connected Industrial Actuator, Condition Monitoring Node, Embedded Communication Gateway, Compact Equipment Controller.
Industrial Sensor Controller
The XMC1302Q024F0064ABXUMA1 fits industrial sensor nodes that acquire physical inputs and process measurements locally. Its 32 MHz ARM Cortex-M0 core provides enough throughput for sampling, filtering, thresholds, and communication tasks, while the mixed-signal acquisition capability reduces the need for separate interface circuitry. The 64 KB flash holds application firmware and calibration information, and 16 KB SRAM supports buffers and protocol state. A 3.3 V or 5 V design can simplify integration into existing industrial electronics.
Được đề xuất
Building Automation Module
The XMC1302Q024F0064ABXUMA1 suits compact building-automation modules that supervise sensors, relays, and local communication links. The 32 MHz Cortex-M0 core can manage scheduled sampling, debounce logic, state machines, and protocol handling, while 64 KB flash reserves space for firmware and configuration. Its 16 KB SRAM is useful for transient message buffers and multi-task state. The compact 24-pin package supports dense control boards without requiring a large external memory interface.
Được đề xuất
Connected Industrial Actuator
The XMC1302Q024F0064ABXUMA1 is appropriate for actuator-control boards requiring deterministic embedded logic and serial communications. The 32 MHz Cortex-M0 processor can execute motion sequencing, position limits, fault detection, and command protocols, while mixed-signal acquisition supports feedback monitoring. Its 64 KB flash stores application code and calibration tables, and 16 KB SRAM accommodates command queues and control state. Multi-protocol serial connectivity helps bridge local sensors and system-level communications.
Được đề xuất
Condition Monitoring Node
The XMC1302Q024F0064ABXUMA1 can serve as a local condition-monitoring node for pumps, motors, machinery, or environmental equipment. Its mixed-signal acquisition supports sensor conditioning and measurement workflows, while the 32 MHz core handles filtering, peak detection, trend logic, and event reporting. The 16 KB SRAM provides working space for samples and running statistics, and the 64 KB flash stores firmware plus operating parameters. Serial connectivity enables integration with gateways or higher-level controllers.
Được đề xuất
Embedded Communication Gateway
The XMC1302Q024F0064ABXUMA1 supports small protocol-conversion and gateway functions where deterministic embedded control is needed. Multi-protocol serial connectivity allows the device to bridge sensor, actuator, and host interfaces, while the 32 MHz Cortex-M0 core performs framing, routing, checks, and timeout management. The 64 KB flash holds gateway firmware and protocol configuration, and 16 KB SRAM supports active message queues. Its 24-pin package helps reduce board area in distributed industrial networks.
Được đề xuất
Compact Equipment Controller
The XMC1302Q024F0064ABXUMA1 works well as the central controller in compact industrial equipment with local analog and digital interfaces. The 32 MHz Cortex-M0 core coordinates control loops, user inputs, diagnostics, and serial service commands. Mixed-signal acquisition handles sensor channels, while 64 KB flash and 16 KB SRAM provide internal program and working memory. The PG-VQFN-24-19 package supports compact surface-mount assemblies, although the exposed pad and package-specific via pattern must follow the manufacturer layout guidance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XMC1302Q024F0064ABXUMA1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Do not choose a generic 24-QFN Cortex-M0 MCU solely because its memory size and clock rate look similar. Pin multiplexing, analog functions, exposed-pad treatment, startup and boot behavior, programming tools, and software support may differ. Cross-brand devices such as the EFM32HG308F64G-A-QFN24R are not established drop-in replacements. Select another MCU when larger memory, greater GPIO availability, a different package, or a preferred development ecosystem outweighs the XMC1302 family's mixed-signal integration.
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XMC1302-Q024X0064-AB |
|---|---|---|
| Package | PG-VQFN-24-19 | PG-VQFN-24-19 |
| Brand | Infineon | Infineon |
| Processor Core | ARM Cortex-M0 | ARM Cortex-M0 |
| CPU Architecture | 32-bit | 32-bit |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Embedded Flash Memory | 64 KB (64K x 8) | 64 KB |
| Static RAM | 16 KB | 16 KB |
| Core Count | 1 core | 1 core |
| Supply Voltage Options | 3.3 V or 5 V | 3.3 V or 5 V |
| Industrial Qualification | Industrial | Industrial |
Bảo phân biệt quan trọng
- Same-family electrical configuration (vsXMC1302-Q024X0064-AB)
- Industrial mixed-signal integration (vsXMC1302-Q024X0064-AB)
- Compact surface-mount footprint (vsXMC1302-Q024X0064-AB)
Ghi chú thiết kế
Use the PG-VQFN-24-19 land pattern, pad numbering, solder-mask clearance, and exposed-pad dimensions from the Infineon package drawing. The exposed pad is not a substitute for a general-purpose signal pad; connect it exactly as specified by the manufacturer. Place decoupling capacitors close to the associated supply pins and provide a short, low-impedance ground return so switching current does not share a noisy path with analog inputs.
Separate analog acquisition routes from fast digital and serial signals when the board layout permits. Keep sensor inputs short, avoid routing them beneath switching nodes or clock nets, and use a continuous ground reference beneath the MCU area. For mixed-signal designs, place analog filtering components close to the source and the MCU pins, and consult the datasheet's alternate-function and analog-pin recommendations before assigning every available pin.
Do not select a replacement based only on CPU frequency, flash capacity, and package pin count. A valid drop-in device must match pin multiplexing, exposed-pad treatment, analog functions, electrical limits, reset behavior, boot configuration, and programming requirements. The XMC1302-Q024X0064-AB family designation is the closest documented option; a generic 24-pin Cortex-M0 device can require PCB, bootloader, and firmware changes.
Confirm the operating voltage and peripheral-specific supply restrictions in the manufacturer datasheet before finalizing the rail design. The XMC1302Q024F0064ABXUMA1 is associated with 3.3 V or 5 V operation, but the enabled analog, digital, and communication functions can influence current demand and pin-level limits. Use local bulk and high-frequency bypass capacitance, and account for regulator headroom during startup and maximum-load transitions.
Thông tin tuân thủ
The component listing identifies the exact MPN as RoHS3 compliant. No additional REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification declaration is stated.