ArduinoCore-Zephyr 1.0.0 brings VENTUNO Q support and Zephyr 4.4.1 baseline

Arduino ships ArduinoCore-Zephyr 1.0.0 with VENTUNO Q board support, Zephyr 4.4.1 base, and Nicla Vision camera hooks, expanding the supported hardware list for Zephyr-based designs.

已發布 已更新 4 分鐘閱讀 ✓ 支援 AI 分享

TL;DR — 三句話摘要

  • Arduino released ArduinoCore-Zephyr 1.0.0 on 2026-09-04 with VENTUNO Q, Nicla Vision camera, and Zephyr 4.4.1 base (S1).
  • Version 0.90.0 on July 29, 2026 was the first stable ArduinoCore-Zephyr release, so 1.0.0 is the second stable tag (S1).
  • The release lists 11 Arduino-supported boards from UNO Q through Nicla Vision (S1).

取自 key_takeaways （實際欄位，最多 3 筆）。事實與分析分別標示。

ArduinoCore-Zephyr 1.0.0 brings VENTUNO Q support and Zephyr 4.4.1 baselineEditorial cover for a component sourcing brief. Chip motif; headline "ArduinoCore-Zephyr 1.0.0 brings VENTUNO Q support and Zephyr 4.4.1 baseline". Reported key numbers: 1.0.0; 4.4.1; 0.90.0. 1 cited source. A one-time entrance animation stops under reduced motion.ArduinoCore-Zephyr 1.0.0 brings VENTUNO Qsupport and Zephyr 4.4.1 baselineREPORTED KEY NUMBERS1.0.04.4.10.90.01 sourceXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

您來自 AI 回答 — 這是可驗證的原始內容

AI 摘要可能遺漏了其主張的依據。原始預測、受影響零件及每一項引用皆在本頁，且均可追溯至其來源。

XAIPART 預測

本簡報包含可證偽的預測。

跳至完整預測及其證偽規則 ›
受影響零件

此報導無目錄相符項目 — 寧可不顯示，也不推斷相符。

查看判定方式 ›
正在尋找零件？送出詢價 → RFQ

Reported by CNX Software on 2026-09-04. Summarized and analyzed by XAIPART Editorial.

What happened

Arduino has released ArduinoCore-Zephyr version 1.0.0, adding new hardware support, an updated Zephyr real-time operating system base, and additional camera capability.S1 Release highlights include support for the Arduino VENTUNO Q single-board computer, specifically targeting its STM32H5F5 real-time microcontroller, an update to Zephyr 4.4.1 with upstream improvements, security fixes, and driver support, and added Nicla Vision camera support to capture and process image data through the Zephyr core.S1 The release also bundles bug fixes and continuous integration improvements.S1

ArduinoCore-Zephyr 1.0.0 is not the first stable build; the source notes that version 0.90.0, released on July 29, 2026, was the first stable release of the line.S1 The full change list is published on the project GitHub release page.S1

According to the source, the boards currently supported by Arduino for this core include UNO Q, VENTUNO Q, Portenta H7, Portenta C33, Opta microPLC, GIGA R1 WiFi, Nano Matter, Nano RP2040 Connect, Nano 33 BLE, Nicla Sense ME, and Nicla Vision.S1 Third-party targets reachable through the Arduino-maintained Zephyr Community Boards package include the Renesas EK-RA8D1, NXP FRDM-MCXN947, and NXP FRDM-RW612.S1 The source notes that the IDE usually installs the Zephyr loader on first upload but that a manual install appears mandatory for the Portenta C33.S1

Key numbers
MetricReported value
ArduinoCore-Zephyr version released1.0.0
Zephyr RTOS base version in 1.0.04.4.1
First stable ArduinoCore-Zephyr release0.90.0
First stable release dateJuly 29, 2026
Number of Arduino-supported boards in 1.0.0 list11
Number of third-party boards listed for Zephyr Community Boards testing3
Number of new boards added in 1.0.0 vs. first stableNot disclosed

Background timeline

  1. - Arduino first announced its plan to switch from Arm Mbed to the Zephyr RTOS.S1
  2. - Arduino released the first beta of Arduino Core for Zephyr.S1
  3. - Arduino released ArduinoCore-Zephyr 0.90.0, the first stable version of the line.S1
  4. - Arduino released ArduinoCore-Zephyr 1.0.0 with VENTUNO Q support, Nicla Vision camera support, and the Zephyr 4.4.1 base.S1

XAIPART take

Technical impact

Moving to a Zephyr 4.4.1 base gives design teams newer upstream driver coverage, security patches, and RTOS refinements compared with the 0.90.0 stack, which matters for products that need long-lived CVE backports.XAIPART analysis Native VENTUNO Q support exposes the STM32H5F5 real-time MCU directly to Arduino sketches, which simplifies prototyping on a Cortex-M33 class core that already targets industrial control workloads.XAIPART analysis Nicla Vision hooks inside the Zephyr core shorten the path from sensor frame to on-device inference, removing the need for an Mbed-specific camera abstraction layer.XAIPART analysis

Market impact

The 11-board support list, spanning UNO Q through Nicla modules, gives procurement a single Arduino-validated Zephyr toolchain for low-volume professional designs, which can reduce the time teams spend qualifying separate SDKs per part.XAIPART analysis Because Zephyr Community Boards also covers Renesas EK-RA8D1 and NXP FRDM-MCXN947 / FRDM-RW612, buyers sourcing RA8D1 or RW612 silicon can prototype on Arduino before moving to vendor-native Zephyr BSPs, smoothing second-source planning.XAIPART analysis The release does not affect part availability or distributor lead times on its own; the relevant risk is firmware supportability, not supply.XAIPART analysis

Action

Engineering teams already on ArduinoCore-Zephyr 0.90.0 should plan a validation pass on 1.0.0 to pick up the Zephyr 4.4.1 security baseline, especially for any Nicla Vision or VENTUNO Q design that was held back on the older core.XAIPART analysis Portenta C33 users should budget time for a manual Zephyr loader install, since the IDE flow does not automate it on that board.XAIPART analysis For new designs, request the Arduino Zephyr Boards 1.0.0 package from the board manager and confirm the board file update prompt before locking the toolchain version in a CI pipeline.XAIPART analysis

XAIPART Forecast

XAIPART expects that, within 9 months of the 2026-09-04 release (i.e., by 2027-06-04), at least one of the boards listed in the current ArduinoCore-Zephyr 1.0.0 support matrix (for example, UNO Q or Portenta H7) will appear in an Arduino-maintained example that exercises Zephyr 4.4.1 west workspace flow with a documented security CVE backport reference; if no such example references Zephyr 4.4.1 by that date, this forecast is wrong.XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Uncertain: the exact list of CVEs or security fixes in Zephyr 4.4.1 is not detailed in the source; whether the 1.0.0 release introduces any API-breaking changes versus 0.90.0 is not disclosed.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Dated developments, extracted from this page's timeline (curated milestones = hollow markers).
Timeline of dated developmentsDated entries: 2024-07-01 2024 - Arduino first announced its…; 2024-12-01 2024 - Arduino released the first …; 2026-07-29 29, 2026 - Arduino released Arduin…; 2026-09-04 - Arduino released ArduinoCore-Zep….2024-07-012024 - Arduino first announced its…2024-12-012024 - Arduino released the first …2026-07-2929, 2026 - Arduino released Arduin…2026-09-04- Arduino released ArduinoCore-Zep…

替代品與生命週期

已建檔的替代品——目錄範圍，並非市場排名
零件關係生命週期依據
— 檔案中無替代品 需要資料 — 需要 match_type 在任何前代標籤出現之前

「前代」與「替代」標籤僅來自已記錄的相符類型、生命週期狀態或來源文字。未記錄相符項目時，不顯示任何標籤。我們自家的刊登內容不構成市場參考。

值得關注

可證偽預測 — 門檻、時間窗與目前狀態。已證偽的預測仍保留可見。
主張門檻作者狀態
XAIPART expects that, within 9 months of the 2026-09-04 release (i.e., by 2027-06-04), at least one of the boards listed in the current ArduinoCore-Zephyr 1.0.0 support matrix (for example, UNO Q or Portenta H7) will ... no such example references Zephyr 4.4.1 by that date Pending

事後證明錯誤的預測會保留可見並加以標記。我們不會刪除。

受影響零件

無目錄相符項目。 此消息未對應到 XAIPART 目前上架的任何零件。我們不會推測相符項目，也不會顯示佔位清單。

各維度成本壓力

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.1243, neutral. Composite index -10.1, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.1243 · neutral5 dcomposite −10.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

本內容的產生方式

流程證據 — 擷取、來源合理性、模型與閘門
此簡報的稽核軌跡
Source fetched CNX Software · www.cnx-software.com · 2,404 chars
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 7,153 tokens · 29.7s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.032319 · C10 rounds 0
Time contract 4 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

上述每一列皆由流程產生，並非人工撰寫。

編輯評分

確定性閘門結果 — 純 PHP，判定過程無模型參與
閘門評分明細 6 項適用檢查， 6通過： 100 百分比. Hold items: C13 (falsifiable forecast) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6735. 適用檢查已通過 6 / 6 = 100% · 判定： hold Hold items: C13 (falsifiable forecast) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6735 是否發布由審核關卡決定。獨立稽核分數僅供參考。

相關報導

發現錯誤？ 告訴我們哪裡有誤 ——更正會與原文一同發布並記錄。我們不會默默修改文章。

留言

成為第一個留言的人。

來源

  1. ArduinoCore-Zephyr 1.0.0 adds support for Arduino VENTUNO Q, updates to Zephyr 4.4.1, and more — https://www.cnx-software.com/2026/09/04/arduinocore-zephyr-1-0-0-adds-support-for-arduino-ventuno-q-updates-to-zephyr-4-4-1-and-more/ · rss · 存取於

事實標記為 S1/S2，並可追溯至連結來源。標示為 分析 是 XAIPART 自身的推理，與報導事實分開保留。來源連結會被追蹤，而非 nofollow ——署名為刻意為之。