產品(42,000+)

MT62F1536M32D4DS-023 - 48Gbit LPDDR5X SDRAM | Micron Technology
MT62F1536M32D4DS-023

MT62F1536M32D4DS-023 - 48Gbit LPDDR5X SDRAM | Micron Technology

The Micron Technology MT62F1536M32D4DS-023 is a 48Gbit Mobile LPDDR5X SDRAM memory IC organized as 1.5G x 32, operating at up to 4.266 GHz with LVSTL (Low Voltage Swing Terminated Logic) interface signaling, supplied in a 315-ball TFBGA (12.4 mm x 15 mm) surface-mount package. LPDDR5X (Low Power Double Data Rate 5X) is the extended-speed evolution of the LPDDR5 DRAM standard defined by JEDEC, engineered for mobile and power-constrained computing. As a volatile SDRAM within the broader memory hierarchy (DRAM -> mobile DRAM -> LPDRAM), it stores working data for application processors while minimizing power per bit transferred, making it the dominant main-memory technology in smartphones, tablets, and AI edge devices. Key features of this component include the 48 Gbit (6 GB) density in a single package, the 1.5G x 32 organization that supports wide 32-bit memory channels, and the LPDDR5X speed grade supporting a 4.266 GHz clock rate - a substantial bandwidth uplift over LPDDR5 (3.2 GHz, as seen in the related WT:B variant). The LVSTL interface reduces I/O swing to lower simultaneous-switching noise and I/O power at multi-gigahertz data rates. The device operates from a supply voltage of 1.01 V to 1.12 V (VDDQ domain), reflecting the reduced core and I/O voltages that define the LPDDR5X generation. The 315-TFBGA package (12.4 x 15 mm) uses a fine-pitch ball grid array to accommodate the high ball count required by the 32-bit data bus, address/control, and power delivery - a footprint intended for HDI (high-density interconnect) mobile-class PCB stackups. Typical applications include flagship smartphone main memory, AI accelerator and edge-inference modules that stream large weight arrays, automotive infotainment and ADAS domains (the AEC-Q100-qualified AUT:C variant of this same die serves that market), and high-performance portable compute such as tablets and XR headsets. High bandwidth at low power per gigabyte is the common requirement across all of these. Design consideration: LPDDR5X signal integrity demands strict length matching of the data groups, careful controller training for read/write eye margins, and following the power-rail sequencing and termination guidance in the manufacturer datasheet; reuse a validated reference layout rather than improvising the fly-by topology. This page synthesizes distributor pricing and availability, drop-in same-die variant comparisons (WT, AUT, AAT, AIT speed/temperature options), and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MT62F1G32D2DS-026 WT:C - 32Gb LPDDR5 SDRAM 3.2GHz 315-TFBGA | Micron
MT62F1G32D2DS-026 WT:C

MT62F1G32D2DS-026 WT:C - 32Gb LPDDR5 SDRAM 3.2GHz 315-TFBGA | Micron

The Micron MT62F1G32D2DS-026 WT:C is a 32 Gbit Mobile LPDDR5 SDRAM memory IC organized as 1G x 32 bits, operating at a 3.2 GHz parallel clock and housed in a 315-ball TFBGA (12.4 x 15 mm) surface-mount package. According to Micron's LPDDR5 part catalog, this device is qualified for the JEDEC LPDDR5 standard and targets power-constrained mobile platforms. LPDDR5 (Low-Power Double Data Rate 5) is the fifth generation of JEDEC-standardized low-power DRAM, succeeding LPDDR4/LPDDR4X. As a Mobile SDRAM, it belongs to the hierarchy volatile memory -> DRAM -> SDRAM -> Mobile SDRAM -> LPDDR5, and is engineered for applications where both high bandwidth and very low standby power are mandatory. LPDDR5 introduces per-channel decision feedback equalization (DFE), data-copy and write-X features that reduce SoC-to-DRAM traffic, and a deep sleep mode that cuts refresh current. The MT62F1G32D2DS is a dual-channel (32-bit I/O width) part aimed at flagship smartphone APs, AI edge accelerators, and thin-and-light notebooks. Key features include a 32 Gbit density (8 banks per channel × 2 channels), a 3.2 GHz data-rate clock (6400 MT/s per pin in the -026 speed grade), 1.05 V typical VDD supply voltage, and 0.9 V/1.2 V selectable VDDQ. The device supports on-die ECC for single-bit error correction in automotive and industrial workloads, and integrates a temperature-compensated refresh engine. The -026 speed bin corresponds to a 3.2 Gb/s/pin transfer rate in this part numbering scheme. The MT62F1G32D2DS-026 WT:C uses a 315-ball TFBGA package with a 0.5/0.8 mm pitch, optimized for high-density mobile PCB layouts. Two 16-bit channels share the package balls, with dedicated clock, command, and data byte lanes per channel. The package's 12.4 x 15 mm footprint and 1.0 mm max height make it compatible with smartphone motherboard stack-ups that include the application processor, the PMIC, and a discrete Wi-Fi/Bluetooth module on the same PCB. Typical applications include flagship smartphones and tablets, ultra-thin notebooks, AR/VR headsets, AI edge inference modules, automotive infotainment platforms, and 5G mmWave modem sub-assemblies. This MT62F1G32D2DS-026 WT:C variant (commercial temperature range, WT designator) is the mainstream consumer-grade SKU, while the WT:B and WT:A suffix variants target industrial/automotive-grade qualification. When designing with this part, ensure the SoC's LPDDR5 PHY supports the 6400 MT/s data rate and the 32-bit dual-channel configuration. The PCB layout must match Micron's reference 4-layer or 6-layer stack-up to keep the channel loss under 6 dB at 3.2 GHz; use 100 ohm differential impedance for the clock pair and CA/CS signals. Decoupling must follow Micron's Mobile LPDDR5 PCB design guide.

詢價 聯絡我們
MT62F512M64D4EK-031 AIT:B - 32Gb LPDDR5 SDRAM 512Mx64 3.2GHz | Micron
MT62F512M64D4EK-031 AIT:B

MT62F512M64D4EK-031 AIT:B - 32Gb LPDDR5 SDRAM 512Mx64 3.2GHz | Micron

The Micron MT62F512M64D4EK-031 AIT:B is a 32 Gbit Mobile LPDDR5 SDRAM organized as 512M x 64 in a 441-TFBGA (14x14) surface-mount package, operating up to 3.2 GHz with a maximum per-channel bandwidth of 12.8 GB/s. It is qualified to AEC-Q100 standards and ships in an industrial temperature grade suitable for harsh-environment automotive and embedded platforms. An LPDDR5 SDRAM is a fifth-generation low-power double data rate synchronous DRAM designed for mobile and power-constrained systems. LPDDR5 improves on LPDDR4X by introducing multi-clock command/address inputs, deeper prefetch (16n-bit or 32n-bit), higher per-pin bandwidth via CKR (Clock Request) support, and on-die error correction code (ECC). LPDDR5 sits within the SDRAM family -> DRAM -> volatile memory -> integrated circuit taxonomy, and is the dominant low-power main memory in smartphones, automotive infotainment, AI edge accelerators, and always-on embedded SoCs. Key features of the MT62F512M64D4EK-031 AIT:B include a 4 KB page size with 8-bank mode (or 2 KB page with 16-bank / bank group mode), ZQ calibration, on-chip ECC, asynchronous reset, data mask function, and optional CKR support. Differential command clock (CK_t/CK_c) and data clock (WCK_t/WCK_c) signaling improve signal integrity at high data rates. The QDP (Quad Die Package) configuration stacks four 8 Gb dies to reach 32 Gb density. Architecturally the device uses a 16n prefetch datapath feeding four 8 Gb LPDDR5 dies in a single 441-ball TFBGA, providing x64 channel width across two channels. The 031 speed bin denotes 6400 MT/s operation per pin, achieving the 12.8 GB/s peak per-channel bandwidth figure quoted by Micron. Typical applications include automotive ADAS compute platforms, in-vehicle infotainment (IVI), AI edge inference modules, premium smartphone application processors, and ruggedized industrial tablets. Designers choose this part for its AEC-Q100 qualification, large 32 Gb density, and the high bandwidth density per watt that LPDDR5 delivers versus LPDDR4X. When designing in this device, allocate adequate PCB area for the 14 mm x 14 mm BGA and route the differential CK/WCK pairs with length matching within the JEDEC LPDDR5 skew tolerance. Use Micron's reference PCB design guide for impedance and decoupling. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MT62F6G24D156A-001 - 96Gbit Mobile LPDDR5 SDRAM | Micron
MT62F6G24D156A-001

MT62F6G24D156A-001 - 96Gbit Mobile LPDDR5 SDRAM | Micron

The Micron MT62F6G24D156A-001 is a high-density Mobile LPDDR5 SDRAM memory IC in the Micron LPDDR5 family. Decoding the Micron naming convention, the device integrates 96 Gbit of storage in a 563-ball fine-pitch BGA package, organized across multiple die stacks to deliver the bandwidth required by advanced mobile, automotive, and edge-AI platforms. A Mobile LPDDR5 (Low-Power Double Data Rate 5) SDRAM is a JEDEC-standard volatile memory that operates at low voltage (typically 1.05–1.1 V VDD and 0.9–1.0 V VDDQ) while delivering high data rates through a 16n prefetch architecture and double-data-rate I/O. LPDDR5 sits above LPDDR4X in the low-power DRAM taxonomy, trading slightly higher complexity for substantially higher bandwidth per pin and improved refresh management. It belongs to the wider class of synchronous DRAM, which itself is a subset of volatile memory ICs used as main system memory in compute platforms. Key features of the MT62F6G24D156A-001 family include high per-pin data rates (up to 6400 MT/s in LPDDR5X-class extensions), deep command/address scrambling for link robustness, on-die ECC for soft-error mitigation, and per-byte VDDQ voltage scaling that minimizes platform power. The device supports both single-rank and multi-rank channel topologies, and the 563-ball BGA exposes a wide 64-bit data interface (x64) for parallel data transfer at multi-GHz effective rates. The MT62F6G24D156A-001 is built on Micron's advanced 1y/1z-class DRAM process with Through-Silicon-Via (TSV) or wire-bond multi-die stacking in a single package, which yields a small PCB footprint relative to its capacity. The 563-ball BGA integrates ground/VDD/VDDQ decoupling balls, command/address balls, and the data DQ/DQS balls. This architecture is engineered for sustained high-bandwidth operation while keeping DRAM-array refresh current low — critical for always-on and thermally constrained platforms. Typical applications include high-end smartphone main memory, automotive infotainment and ADAS platforms, AI PC and edge inference accelerators, and 5G mmWave baseband subsystems. The combination of high density (96 Gbit), wide x64 channel width, and LPDDR5 power efficiency makes it particularly suited to designs that require multi-gigabyte system memory in a thermally constrained enclosure. When designing with this device, follow the Micron LPDDR5/LPDDR5X reference PCB layout for the 563-ball BGA: matched-length routing on the data byte lanes, proper VDD/VDDQ decoupling, and tight skew control on CK_t/CK_c. Confirm thermal headroom under sustained write workloads, as multi-gigabyte transfers at 6400 MT/s can push junction temperature above the commercial-grade limit if airflow is limited. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the official Micron datasheet and PCB-layout application notes.

詢價 聯絡我們
MT65B12G16080A00QG-92:A - 24GB HBM3E 2.3GHz X1088 WFPGA | Micron
MT65B12G16080A00QG-92:A

MT65B12G16080A00QG-92:A - 24GB HBM3E 2.3GHz X1088 WFPGA | Micron

The Micron MT65B12G16080A00QG-92:A is a 24 GB HBM3E (High Bandwidth Memory 3E) stacked DRAM device organized as X1088 with a 2.3 GHz data-rate specification, supplied in a WFPGA package. It is the latest generation of Micron's HBM family targeted at AI accelerators, GPU compute dies, and high-performance computing SoCs that require terabyte-per-second aggregate bandwidth from a compact, vertically stacked memory sub-system. HBM (High Bandwidth Memory) is a JEDEC-standardized 3D-stacked DRAM architecture that places multiple DRAM dies atop a base logic die through TSV (Through-Silicon Via) interconnects. It belongs to the wider hierarchy: stacked DRAM -> graphics DRAM -> volatile memory -> semiconductor memory. Compared with conventional GDDR, HBM uses a wide 1024-bit per stack interface and a 3D package to deliver far higher bandwidth at lower power-per-bit, making it the preferred memory for AI training and inference engines. Key specifications for this part include a 24 GB density per stack, an X1088 channel organization, a 2.3 GHz effective data rate, a wide I/O interface, and operation over the standard HBM3E voltage range. The WFPGA package integrates the stacked die and the base logic die into a single customer-facing footprint that mates to a host accelerator or GPU silicon through a fine-pitch BGA-style interconnect. Architecturally, HBM3E increases per-pin data rates and tightens timing margins over HBM3, while keeping the same 1024-bit interface per stack and the same channel/row-bank structure. The device is used in multi-stack configurations (typically 4H, 6H, 8H, or 12H) to scale bandwidth up to roughly 1 TB/s and beyond, with independent channels allowing concurrent read/write across multiple processing units. Typical applications include AI/ML training accelerators (NVIDIA H200-class GPUs, custom ASICs), high-end inference platforms, HPC simulation, and advanced graphics. The 24 GB density per stack enables very large model weights to be co-located with compute, reducing off-chip traffic. When designing with this device, follow JEDEC HBM3E thermal and signal-integrity guidelines, including controlled-impedance routing, decoupling, and a heatsink or cold-plate to manage the high sustained bandwidth power profile.

詢價 聯絡我們
MT8816AP1 - 8x16 Analog Crosspoint Switch IC | Microchip
MT8816AP1

MT8816AP1 - 8x16 Analog Crosspoint Switch IC | Microchip

The Microchip Technology MT8816AP1 is an 8x16 analog crosspoint switch IC housed in a 44-pin PLCC (16.59x16.59 mm) package, originally designed by Zarlink (now Microchip) in ISO-CMOS technology. It provides 128 bilateral analog switches arranged as an 8-row by 16-column array, controlled by a built-in 7-to-128 line decoder and transparent data latches. The device supports a wide analog signal range of ±12 V peak-to-peak across the switch array while operating from a single supply. An analog crosspoint switch is a semiconductor device that allows any of M input channels to be connected to any of N output channels through a programmable matrix, forming the switching core of telecom test equipment, audio routing systems, and instrumentation. The MT8816 family belongs to the broader category of analog switches and multiplexers, which sit hierarchically under interface ICs in the signal-chain taxonomy: analog crosspoint switch -> analog switch -> multiplexer -> interface IC -> integrated circuit. ISO-CMOS technology refers to a dielectrically-isolated CMOS process that yields low leakage, high latch-up immunity, and excellent analog signal integrity for audio-frequency and baseband signal routing. Key specifications include a maximum on-resistance of 65 ohm at VDD and 100 ohm at lower supply rails, low distortion full-CMOS switching, low feedthrough, and short set-up and hold times for the digital control interface. The 7-to-128 decoder means only seven address lines plus one data line are required to control all 128 crosspoints, simplifying host-ASIC or microcontroller glue logic. The integrated latch retains the last selected switch state without continuous address-bus activity, lowering software overhead in PCM/telecom and ATE designs. Typical applications include telecommunications line cards (T1/E1 switching, time-slot interchange), PCM test access, video and audio signal routing, automated test equipment (ATE) pin electronics, and PBX/key-system line selection. The wide ±12 V analog headroom makes it suitable for codec loopback and subscriber-line interface circuits. When designing with the MT8816AP1, observe absolute maximum analog signal ratings and provide adequate VDD decoupling to keep digital switching transients out of the analog path. Use the EN pin and address latches to implement broadcast or sequential-scan patterns and minimize channel-to-channel charge injection in measurement paths. This page consolidates distributor pricing, drop-in alternative candidates, and practical design guidance that supplements the manufacturer datasheet and accelerates your component selection.

詢價 聯絡我們
MT88L70AS1 - 3V DTMF Receiver SOIC-18 | Microchip Technology
MT88L70AS1

MT88L70AS1 - 3V DTMF Receiver SOIC-18 | Microchip Technology

The Microchip Technology MT88L70AS1 is a complete 3V DTMF (Dual-Tone Multi-Frequency) receiver IC integrating both a bandsplit filter and a digital decoder in a single 18-pin SOIC package. It features internal gain-setting amplifier, adjustable guard time, central-office-quality DTMF decoding, power-down mode, inhibit mode, and low power consumption, and is functionally compatible with the Zarlink MT8870D. A DTMF receiver is a tone-decoding interface IC used in telephone and VoIP systems, security panels, remote control, and industrial command decoders to detect standard 16-tone DTMF pairs transmitted on the audio path. It belongs to the broader class of telecom interface ICs (hypernymy: DTMF receiver -> tone decoder -> telecom interface IC -> interface IC -> integrated circuit). DTMF receivers remain relevant in legacy PSTN endpoints, two-way radio signalling, and any audio-band command channel where robust in-band signalling is required. The MT88L70AS1 operates from a 3V supply, making it well suited to battery-powered and portable equipment. Key features include switched-capacitor band-split filters for the standard high-group and low-group DTMF frequencies, a digital counting decoder that outputs a 4-bit code for the 16 DTMF pairs, and an internal gain-setting amplifier that allows direct connection to the line. An adjustable guard time minimises false decoding on transient tones, while power-down and inhibit modes reduce quiescent current in standby. Architecturally, the device combines analog switched-capacitor filtering with digital decoding, allowing the entire DTMF receiver function with minimal external components. The MT88L70AS1 is the 18-pin SOIC variant of the MT88L70 family (also available in 20-pin SSOP as MT88L70AN1 and in 20-pin SSOP tape-and-reel). The original part was developed by Mitel/Zarlink; Microchip acquired the product line and continues to manufacture it as an active legacy part. Typical applications include telephone answering machines, remote control decoders, security alarm panels, two-way radio signalling, industrial command-over-audio links, and any system that needs to detect 16-tone DTMF signalling from a 3V supply rail. Designers of new low-power consumer or industrial products that interface to legacy PSTN or audio-band command channels frequently select the MT88L70AS1 for its 3V operation, central-office decoding quality, and proven pin-out. When designing with this device, ensure the input audio level is within the specified range and add adequate supply decoupling near the VDD pin. Use the standard crystal or external clock as documented in the datasheet to maintain filter accuracy, and adjust the external RC for the desired guard time and minimum tone duration. This page synthesises distributor pricing, drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet alone, helping engineers select the right DTMF receiver for new and legacy designs.

詢價 聯絡我們
MT8LSDT1664AG10E - 128MB PC100 SDRAM DIMM | Micron
MT8LSDT1664AG10E

MT8LSDT1664AG10E - 128MB PC100 SDRAM DIMM | Micron

The Micron MT8LSDT1664AG10E is a 128 MB (16 Meg x 64) unbuffered 168-pin SDRAM Dual In-Line Memory Module (DIMM) organized as 16M x 64 in the PC100/PC133 JEDEC-standard form factor. It operates from a single +3.3V ±0.3V power supply and uses fully synchronous SDRAM components clocked at 125 MHz (PC100) and 133 MHz (PC133), delivering the bandwidth and latency required by late-1990s desktop systems, Pentium III/early Athlon motherboards, and legacy industrial SBCs. A SDRAM (Synchronous Dynamic Random-Access Memory) module is a type of volatile memory that synchronizes data transfers with the system clock, allowing burst-mode reads and writes at one operation per clock cycle. SDRAM DIMMs sit at the base of the PC memory hierarchy (registers/cache → DRAM → storage), and unbuffered (UDIMM) variants like the MT8LSDT1664AG10E are intended for desktops and workstations where the chipset drives the address/command bus directly without a register buffer. This Micron part is part of the legacy MT8LSDT1664A/MT16LSDT3264A DIMM family that defined the PC100/PC133 era. Key features of the MT8LSDT1664AG10E include a 6 ns access time (the "-10E" speed grade), CL2 CAS Latency support at 100 MHz, gold edge-finger contacts (the "G" suffix), operation from 0°C to +70°C (commercial temperature range), fully synchronous operation with all signals referenced to the rising clock edge, and JEDEC-standard pinout that allows drop-in replacement across compliant 168-pin UDIMM sockets. The 168-pin DIMM format uses a 64-bit data bus without ECC, which matches the bandwidth requirements of the Intel 440BX, VIA Apollo Pro, and SiS 630/633 chipset families. Typical applications for the MT8LSDT1664AG10E include legacy desktop PC memory upgrades, industrial single-board computer main memory, factory-floor PC/104 systems, test-and-measurement instrumentation that requires PC-compatible memory, refurbished legacy server base memory, and older point-of-sale terminals. The unbuffered, non-ECC organization makes it unsuitable for registered ECC server platforms; for those systems, the MT9LSDT1672AG (registered, ECC) variant is the recommended replacement. When designing or servicing with this module, observe the JEDEC initialization sequence: hold CKE low, apply stable VDD/VDDQ simultaneously, wait 100 µs, then issue a PRECHARGE-ALL and two AUTO-REFRESH commands before normal operation. Mixed-speed modules in the same bank may force the system to the slowest CAS latency, so populate banks with matched speed grades where possible. The module has reached end-of-life from Micron and is now sourced primarily through the secondary/aftermarket channel. For procurement, verify the full Micron datasheet and confirm the exact speed grade (-10E = 6 ns / 100 MHz CL2) and the gold-finger ("G") contact option. Note that the MT8LSDT1664AG10EE1 variant adds an additional testing/qualification suffix; the -10E base part is the canonical PC100 128 MB reference. This page synthesizes distributor availability, drop-in alternatives, and practical legacy-DIMM design notes not found in the standalone manufacturer datasheet.

詢價 聯絡我們
MTA18ASF2G72PZ-2G6E1 - 16GB DDR4-2666 ECC RDIMM | Micron
MTA18ASF2G72PZ-2G6E1

MTA18ASF2G72PZ-2G6E1 - 16GB DDR4-2666 ECC RDIMM | Micron

The Micron MTA18ASF2G72PZ-2G6E1 is a 16 GB DDR4-2666 ECC Registered DIMM (RDIMM) module organized as a single-rank x4 (1Rx4) configuration, operating at 1.2 V and built on a 288-pin form factor designed for server and enterprise workloads. It delivers a peak transfer rate of 2666 MT/s (PC4-21300) with a CAS latency of 19 clocks and integrated ECC for error correction in mission-critical environments. The module is now in Micron's obsolete RDIMM catalog per the manufacturer product page. A DDR4 RDIMM is a type of registered dual in-line memory module that places a register buffer between the DRAM chips and the memory controller, reducing the electrical load on the controller and enabling higher capacity and reliability per channel. Within the broader hierarchy, RDIMMs belong to the DRAM module category, which itself falls under memory modules, memory ICs, and ultimately semiconductors. RDIMMs are the standard memory form for two-socket and four-socket x86 servers, where ECC and registered buffering are required for data integrity and platform stability. The MTA18ASF2G72PZ-2G6E1 features on-module thermal sensors, parity checking on command/address signals through the register, and 1.2 V operation that reduces module power by approximately 20% versus DDR3 LRDIMMs. The x4 data organization maximizes error-correction granularity, allowing single-bit correctable errors to be detected and fixed without affecting adjacent data lanes. Rank count and organization make this module compatible with platforms validated for 16 GB 1Rx4 DDR4-2666 RDIMMs. Typical applications include HPE ProLiant Gen10 servers such as the BL460c, DL160, DL180, and DL325 platforms, virtualization hosts running VMware ESXi or Hyper-V, in-memory database servers for SAP HANA or Redis Enterprise, and high-performance computing nodes. The 2666 MT/s speed and ECC support make it well-suited for transactional database workloads where predictable latency and data integrity are critical. When deploying this module, ensure the server platform supports 1Rx4 16 GB DDR4-2666 RDIMMs at the rated speed; some older platforms will down-clock to 2400 MT/s. Always populate identical MPNs per memory channel to avoid mixed-rank compatibility issues. Given its obsolete status per Micron, designers should verify long-term availability before specifying this part in new designs.

詢價 聯絡我們
MTA18ASF4G72PZ-3G2E1 - 32GB DDR4-3200 ECC RDIMM | Micron
MTA18ASF4G72PZ-3G2E1

MTA18ASF4G72PZ-3G2E1 - 32GB DDR4-3200 ECC RDIMM | Micron

The Micron MTA18ASF4G72PZ-3G2E1 is a 32 GB registered DDR4 SDRAM memory module (RDIMM) operating at 3200 MT/s (PC4-25600) in a 288-pin DIMM form factor. According to Micron's RDIMM catalog page, the module is built from 1Rx4 (single-rank) x4 DRAM components and supports an industry-standard 1.2 V VDD supply, with on-module ECC for error correction in mission-critical server and workstation platforms. A Registered DIMM (RDIMM) is a type of computer memory module that adds a register buffer between the DRAM chips and the memory controller. This buffer reduces the electrical load on the memory controller, allowing more DIMM slots per channel and higher memory density in enterprise servers. RDIMMs belong to the broader category of DDR4 SDRAM modules, which themselves are a generation of double data rate synchronous DRAM used as system main memory. DDR4 RDIMMs are the workhorse memory form factor for rack-mount servers, workstations, and high-end computing platforms. The key specifications that define this module are: 32 GB total capacity in a single-rank configuration (1Rx4), 3200 MT/s data rate (PC4-25600, CL22), 1.2 V supply voltage (per JEDEC DDR4 standard), and ECC support enabled by an on-module register and parity. The module uses standard 288-pin gold-finger edge contacts and is populated in the Micron server-memory line that drops into Intel Xeon Scalable and AMD EPYC server platforms. In practice, the module integrates a register clock driver (RCD) that buffers command, address, and control signals to the DRAM devices, reducing the capacitive load seen by the host CPU's memory controller. This buffering is what enables four-, six-, and eight-DIMM-per-channel configurations that are typical of dual-socket servers. The ECC capability detects and corrects single-bit errors on-the-fly, which is essential for virtualization, in-memory databases, and other workloads where silent memory corruption would cause data loss. Typical applications for the MTA18ASF4G72PZ-3G2E1 include enterprise servers (Dell PowerEdge, HPE ProLiant, Lenovo ThinkSystem), high-performance workstations (single and dual-CPU), virtualization hosts running VMware vSphere or Hyper-V, and in-memory analytics platforms such as SAP HANA. The 32 GB capacity strikes a balance between per-DIMM density and cost, making it a popular choice for memory upgrades and for replacing failed modules in legacy DDR4 server fleets. When deploying this module, verify that the host platform's memory controller supports DDR4-3200 (or falls back gracefully to a lower speed). Mixed-rank or mixed-capacity populations across channels are supported by JEDEC but should follow the platform's population guidelines for best performance. The module is hot-swap-friendly on most server backplanes but should be inserted only with full power removed to avoid damaging the gold-finger contacts. This page synthesizes distributor pricing, drop-in alternatives from the same Micron OEM family, and practical design notes not found on a single manufacturer datasheet, giving engineers a complete sourcing reference for the MTA18ASF4G72PZ-3G2E1.

詢價 聯絡我們
MTC10F1084S1RC56BD1 - 16GB DDR5-5600 ECC RDIMM 1Rx8 | Micron
MTC10F1084S1RC56BD1

MTC10F1084S1RC56BD1 - 16GB DDR5-5600 ECC RDIMM 1Rx8 | Micron

The Micron MTC10F1084S1RC56BD1 is a 16 GB DDR5-5600 ECC Registered DIMM (RDIMM) server memory module in a 288-pin RDIMM form factor with a 1Rx8 single-rank x8 organization. Operating at a 5600 MT/s data rate (PC5-44800) and a nominal 1.1 V VDD, the module is fully compliant with the JEDEC DDR5 RDIMM standard and is targeted at enterprise server and workstation platforms. The S1 product family designation denotes Micron's server-grade DRAM modules with on-board ECC and register/buffer functions for signal integrity in high-density memory channels. A DDR5 Registered DIMM is a server-class memory module that uses a register clock driver (RCD) to buffer command, address, and control signals between the host memory controller and the DRAM devices, enabling higher capacity and better signal integrity than unbuffered modules. RDIMMs also include ECC (Error-Correcting Code) capability to detect and correct single-bit errors, making them the dominant form factor for mission-critical servers, cloud datacenters, and HPC workloads. DDR5 represents the current generation of synchronous DRAM, doubling peak transfer rates over DDR4 while introducing on-module voltage regulation (PMIC), decision feedback equalization (DFE), and improved refresh schemes. The MTC10F1084S1RC56BD1 features a CAS Latency of CL46, an on-module PMIC for power management, and Micron's 1Rx8 single-rank architecture using 16 Gb DDR5 SDRAM components. The module supports on-die ECC, side-band ECC transparency via the host chipset, and operates within the JEDEC-standard 0 to 95 °C ambient temperature range for server deployment. Thermal sensors on the SPD hub allow real-time monitoring via the system's BMC. Typical applications include enterprise rack servers (1U/2U), hyperconverged infrastructure nodes, AI training/inference GPU servers (as CPU-attached memory), virtualization hosts, in-memory databases, and high-performance computing clusters. The 1Rx8 single-rank organization is preferred for workloads sensitive to memory latency and for systems that populate DIMM slots one-per-channel for maximum bandwidth. When designing with this module, confirm host platform compatibility on the server OEM's memory compatibility list (QVL) before deployment. DDR5-5600 (native speed) typically requires a 12th-gen Intel Xeon Scalable or AMD EPYC 9004/9005 platform; lower-rated platforms may down-clock the module. Always populate modules in matched sets per channel to maintain full bandwidth. This page synthesizes distributor pricing, cross-reference drop-in alternatives (including other Micron SKU variants and OEM-compatible equivalents), and practical server-deployment design notes not consolidated on the manufacturer product page.

詢價 聯絡我們
MTC10F1084S1RC56BD1-TR - 16GB DDR5-5600 ECC RDIMM 1Rx8 | Micron
MTC10F1084S1RC56BD1-TR

MTC10F1084S1RC56BD1-TR - 16GB DDR5-5600 ECC RDIMM 1Rx8 | Micron

The Micron MTC10F1084S1RC56BD1-TR is a 16 GB DDR5-5600 ECC Registered DIMM (RDIMM) server memory module organized as 1Rx8 (single-rank, x8 data width), supplied in Tape & Reel packaging as indicated by the "-TR" suffix. The module conforms to the JEDEC DDR5 standard, operates at a 5600 MT/s transfer rate (PC5-44800), uses a 1.1 V supply, and is built on a 288-pin RDIMM edge connector. A server-class DDR5 RDIMM is a buffered, error-correcting memory module that places a registered clock driver on the address and command signals between the host CPU and the DRAM devices. Within the broader hierarchy, RDIMMs belong to the DRAM family -> volatile system memory -> server/workstation memory tier. They are used in multi-socket servers and enterprise platforms where signal integrity, capacity scaling, and data integrity (via ECC) are required. Key features of this module include 16 GB capacity per module, 5600 MT/s peak transfer rate (PC5-44800), on-die ECC plus sideband ECC for end-to-end data integrity, a registered buffer for high-rank scalability, 1Rx8 organization for balanced cost-per-GB, 1.1 V operation for lower power versus DDR4, and a 288-pin edge connector keyed for RDIMM slots. Micron's server DRAM SKUs are also DID-agnostic, allowing Micron to substitute equivalent compatible parts at shipment when inventory shifts occur. The MTC10F1084S1RC56BD1-TR is designed for OEM server platforms that list a Supermicro cross-reference or equivalent DDR5-5600 1Rx8 16 GB RDIMM. The "-TR" suffix denotes Tape & Reel packaging rather than tray, which is typically used for system integrators and OEM assembly lines. Typical applications include single- and dual-socket Xeon / EPYC servers, virtualization hosts, in-memory database nodes, AI inference edge servers, and enterprise storage controllers. The 1Rx8 configuration provides a balance of capacity and channel rank population that suits mainstream server workloads. When designing with this module, confirm that the server's memory controller and BIOS support DDR5-5600 (PC5-44800) RDIMMs at 1.1 V. For multi-module-per-channel configurations, verify the populated rank count is within the platform's validated compatibility list. Mixing RDIMMs of different ranks or speeds will force the memory bus to fall back to the slowest module's timing.

詢價 聯絡我們
MTC20C2085S1EC56BR - 32GB DDR5-5600 ECC UDIMM 2Rx8 CL46 | Micron
MTC20C2085S1EC56BR

MTC20C2085S1EC56BR - 32GB DDR5-5600 ECC UDIMM 2Rx8 CL46 | Micron

The Micron MTC20C2085S1EC56BR is a 32 GB DDR5-5600 ECC Unbuffered DIMM (UDIMM) memory module organized as 2Rx8 with a CL46 CAS latency, supplied in a 288-pin DIMM form factor and operating at 1.1 V. Engineered on Micron's 16 Gb DDR5 die generation, the module delivers 5600 MT/s (PC5-44800) peak transfer rate while consuming the lower idle/active power envelope that defines the DDR5 standard versus DDR4. A DRAM module (sometimes called a memory module, DIMM, or SDRAM module) is a printed-circuit board that aggregates multiple DRAM devices into a single, addressable unit accessed through a parallel data bus. In the system hierarchy, a DIMM sits beneath the memory controller, above the individual DRAM die, and is governed by the JEDEC DDR5 standard for electrical, timing, and command-protocol compliance. UDIMM stands for Unbuffered DIMM, meaning the address and control signals from the host memory controller reach the DRAM devices directly without an intermediate register, trading some signal-integrity margin for lower latency and lower cost relative to RDIMM. Key features of the MTC20C2085S1EC56BR include on-module ECC for single-bit error correction and multi-bit error detection, integrated PMIC (power management IC) support that brings 5 V from the slot and generates all required DDR5 rails on-module, dual-rank organization (2R) that boosts per-channel capacity, and JEDEC-standard 1.1 V operation. The module is rated at DDR5-5600 PC5-44800 with a CL46 timing and 2Rx8 rank/x8-device configuration. Technically, the module aggregates multiple 16 Gb DDR5 devices to reach 32 GB, with on-board SPD/EEPROM storing the JEDEC Serial Presence Detect configuration so the host BIOS recognizes speed, timing, voltage, and organization at POST. The on-module PMIC handles voltage regulation, while the on-die ECC engine and ECC scrubbing protect against bit errors common in dense server-class workloads. Typical applications include edge-compute servers, low-VM-density virtualization hosts, SMB and branch-office servers, AMD EPYC Genoa / Threadripper PRO workstations (TRX50/WRX90 platforms), and Intel Xeon W-2500 entry workstations that specify ECC UDIMM. The module is also used in general-purpose entry servers and content-creation workstations where 32 GB of ECC-protected DDR5-5600 memory is appropriate. When designing with this module, confirm the host board's QVL (qualified vendor list) lists 32 GB 2Rx8 DDR5-5600 ECC UDIMM support, and ensure the memory controller supports 5600 MT/s (some platforms fall back to 4800 MT/s or 5200 MT/s when a faster module is populated). Mixing 2Rx8 and 1Rx8 modules in the same channel can force speed derating; identical rank organization per channel is recommended. This page synthesizes Micron's official product documentation, cross-brand third-party memory module offerings, and practical compatibility notes that are not consolidated in the manufacturer datasheet.

詢價 聯絡我們
MTC20F1045S1RC48BA2R - 32GB DDR5 4800 RDIMM 1Rx4 1.1V | Micron
MTC20F1045S1RC48BA2R

MTC20F1045S1RC48BA2R - 32GB DDR5 4800 RDIMM 1Rx4 1.1V | Micron

The Micron MTC20F1045S1RC48BA2R is a 32GB DDR5 SDRAM Registered DIMM (RDIMM) module rated at 4800 MT/s, organized as 1Rx4 and operating from a 1.1V VDD supply in a 288-pin RDIMM form factor. The module integrates on-DIMM voltage regulation through the 12V-to-PMIC topology required by the DDR5 standard, allowing cleaner power delivery to the DRAM devices and reducing motherboard complexity. A RDIMM (Registered Dual In-line Memory Module) is a type of server-class memory that places a register buffer between the DRAM devices and the memory controller. The register reduces the electrical load on the controller, enabling higher capacity and higher rank counts per channel. RDIMMs sit within the broader taxonomy of DRAM modules -> DDR5 memory -> server memory -> computer memory -> semiconductor components, and are distinguished from UDIMMs (unbuffered) and LRDIMMs (load-reduced) by their balance of capacity, rank scalability, and signal-integrity performance. Key features of the MTC20F1045S1RC48BA2R include a 4800 MT/s data rate (PC5-38400), a base clock of 2400 MHz, 1Rx4 rank/organization, 1.1V nominal VDD, and a die revision in the A-die family. The 288-pin RDIMM edge finger conforms to the JEDEC-standard DDR5 module pinout, supporting error-correcting code (ECC) operation typical of server-class memory and making it suitable for platforms that require data integrity protection. From an architectural standpoint, DDR5 doubles the prefetch and bank-group count of DDR4, introduces on-module PMIC for tighter voltage tolerance, and adopts decision feedback equalization (DFE) on the I/O. These changes deliver higher effective bandwidth at lower per-bit power, which is why DDR5 RDIMMs like the MTC20F1045S1RC48BA2R target mainstream server, workstation, and enterprise storage workloads where capacity per channel and throughput are the primary design constraints. Typical applications include mainstream dual- and single-socket servers, virtualization hosts, in-memory databases, enterprise storage arrays, and content-creation workstations. For OEM platforms validated against JEDEC-standard 4800 MT/s operation, the module offers predictable compatibility and a standardized upgrade path across the DDR5 generation. When integrating this module, verify that the host platform supports 1Rx4 32GB RDIMMs at 4800 MT/s and that the BIOS contains the appropriate SPD timings. Mixed-rank or mixed-density populations are allowed by JEDEC but may downclock; consult the platform memory population guide before deployment in production. This page combines verified distributor pricing, parametric drop-in equivalents, and design notes beyond the raw manufacturer datasheet to support sourcing, qualification, and BOM decisions.

詢價 聯絡我們
MTC40F2046S1RC48BA1R - 64GB DDR5-4800 ECC RDIMM 2Rx4 | Micron
MTC40F2046S1RC48BA1R

MTC40F2046S1RC48BA1R - 64GB DDR5-4800 ECC RDIMM 2Rx4 | Micron

The Micron MTC40F2046S1RC48BA1R is a 64 GB DDR5-4800 ECC Registered DIMM (RDIMM) organized as 2Rx4, operating at 1.1 V with a 288-pin VFBGA edge-finger form factor and 4800 MT/s transfer rate. It is a server-grade memory module designed for Intel Sapphire Rapids and AMD Genoa-class platforms that demand predictable bandwidth scaling and strict data integrity. A Registered DIMM (RDIMM) is a type of server memory module that places a register buffer between the DRAM chips and the memory controller. The register re-drives command, address, and control signals to the DRAM array, which reduces electrical loading on the controller and enables higher module densities and ranks than unbuffered modules. RDIMMs are positioned in the server memory hierarchy above UDIMMs and below Load-Reduced DIMMs (LRDIMMs), and they typically include on-module ECC to detect and correct single-bit errors. DDR5 is the fifth generation of double data rate SDRAM, defined by JEDEC standard JESD79-5, which doubles peak bandwidth versus DDR4 by quadrupling the prefetch and doubling the burst length. Key features of the MTC40F2046S1RC48BA1R include 64 GB capacity, 4800 MT/s data rate (PC5-38400), 2Rx4 rank and organization, ECC error-correction support, and on-module register buffering. The "D1" speed-bin companion to binning yields CL40 timing, and the module is built on Micron's 1znm DRAM process. The 288-pin VFBGA edge connector follows the JEDEC DDR5 RDIMM pinout (MO-329) and is keyed only for RDIMM insertion. From an architectural standpoint, the module integrates a register clock driver (RCD) that buffers CA/CLK signals to the DRAM components, a SPD EEPROM containing module parameters for BIOS enumeration, and a TSOD thermal sensor accessible via the I2C/I3C sideband. On-die ECC at the DRAM component level combined with module-level ECC scrubbing delivers end-to-end data integrity for hyperscale workloads. Typical applications include mainstream server memory populating 1-socket and 2-socket Intel Xeon Scalable (Sapphire Rapids) and AMD EPYC 9004 (Genoa) platforms, hyperconverged infrastructure nodes, AI inference racks requiring large memory capacity, and in-memory database workloads. The 2Rx4 organization balances channel parallelism with cost per gigabyte for mainstream capacity tiers. When designing systems, ensure the BIOS firmware recognizes the JEDEC SPD profile and that the platform's memory controller supports 2Rx4 RDIMM operation at 4800 MT/s. Mixed population with LRDIMMs or 3DS modules on the same channel is generally not allowed per JEDEC RDIMM topology rules. Validate thermal envelope with chassis airflow budgets, as DDR5 modules typically run hotter than DDR4. This page consolidates Micron datasheet excerpts, distributor pricing tiers, drop-in RDIMM replacements from competing JEDEC-compliant vendors, and platform compatibility notes that go beyond the manufacturer datasheet alone.

詢價 聯絡我們
MTC40F2046S1RC56BD1 - 64GB DDR5-5600 ECC RDIMM | Micron
MTC40F2046S1RC56BD1

MTC40F2046S1RC56BD1 - 64GB DDR5-5600 ECC RDIMM | Micron

The Micron MTC40F2046S1RC56BD1 is a 64GB (8Gx80) DDR5-5600 Registered ECC RDIMM server memory module operating at PC5-44800 with a 288-pin form factor and 1.1V supply. It is a 2Rx4 dual-rank module engineered for enterprise server and workstation platforms that require registered buffering, on-module ECC, and JEDEC DDR5 compliance. A DDR5 RDIMM (Registered Dual In-line Memory Module) is a server-class DRAM module that places a register clock driver (RCD) between the DRAM chips and the memory controller, electrically buffering address and command signals so the controller can drive many modules per channel. RDIMMs sit within the broader DRAM module hierarchy (UDIMM < RDIMM < LRDIMM), with ECC RDIMM further adding on-die plus side-band error correction to meet RAS (Reliability, Availability, Serviceability) targets demanded by data-center workloads. Key features include a transfer rate of 5600 MT/s (PC5-44800), a CAS latency of CL46, on-module ECC with x80 organization, 1.1V VDD operation per JEDEC DDR5 specification, and a 288-pin edge-finger connector compliant with the DDR5 RDIMM mechanical outline. The 2Rx4 dual-rank x4 architecture maximizes channel parallelism for higher sustained throughput at matched timings. Architecturally, the module integrates the RCD, a 12V-tolerant PMIC for on-module voltage regulation, a SPD/TS hub for device identification and thermal telemetry, and eight 8Gb DDR5 SDRAM components organized x4 with on-die ECC. Registered buffering enables stable multi-module-per-channel operation (typically 2 DPC) without the signal-integrity loss seen with unbuffered modules. Typical applications include hyperscale and enterprise servers (1-socket, 2-socket, 4-socket), AI training and inference nodes requiring high-capacity registered memory, virtualization clusters with high VM densities, in-memory databases (SAP HANA, Redis), and workstation platforms built on Intel Xeon Scalable or AMD EPYC processors. The 64GB density and 1.1V operation also support thermal-constrained 1U and 2U chassis. When designing, verify BIOS / firmware RC code compatibility with the SKU's SPD profile, confirm the 2Rx4 rank configuration is supported on the target board, and observe airflow requirements for the 1.1V, 5600 MT/s power envelope.

詢價 聯絡我們
MTC40F2046S1RC56BD1-TR 64GB DDR5-5600 ECC RDIMM | Micron
MTC40F2046S1RC56BD1-TR

MTC40F2046S1RC56BD1-TR 64GB DDR5-5600 ECC RDIMM | Micron

The Micron MTC40F2046S1RC56BD1-TR is a 64GB DDR5-5600 Registered ECC server memory module (RDIMM) organized as 2Rx4 with a 288-pin form factor, operating at 1.1 V per the JEDEC DDR5 standard. According to the Micron RDIMM product family datasheet, the module delivers a peak transfer rate of PC5-44800 (5600 MT/s) and is qualified to industrial-grade operating temperatures required for hyperscale and enterprise server deployments. The -TR suffix indicates Tape-and-Reel tray packaging for OEM integration. A DDR5 RDIMM (Registered Dual In-line Memory Module) is a type of server-class DRAM module distinguished from unbuffered UDIMMs by an on-board register clock driver (RCD) that buffers command, address, and control signals between the host memory controller and the DRAM devices. RDIMMs sit in the hierarchy: DRAM device -> DRAM module -> RDIMM -> server memory subsystem, and are the dominant form factor in enterprise and cloud servers because the register buffer enables higher module densities and improved signal integrity at DDR5 data rates. The module integrates ECC (x80, 72-bit data plus 8-bit ECC) for single-bit error correction and multi-bit error detection. Key features include 64GB total capacity, 2Rx4 dual-rank architecture (10x4 device organization), on-module voltage regulation via the DDR5 12 V power management IC, a 288-pin edge connector, and on-die thermal sensors compatible with the JEDEC TSE2004 specification. The 5600 MT/s speed grade places the module in the mainstream DDR5 performance band, balancing bandwidth and power efficiency for general-purpose compute workloads. Technically, the module uses Micron's 1z-generation monolithic DDR5 DRAM die, paired with an on-module PMIC that converts the host-supplied 12 V rail to the voltages required by the DRAM array and RCD. The register buffer reduces stub length and signal loading, enabling the host to populate more DIMM slots per channel than UDIMMs without violating signal-integrity margins. ECC bits provide a Hamming-code-style correction path that is transparent to the application software but critical for hyperscale uptime. Typical applications include enterprise rack servers, AI training and inference nodes, virtualization hosts, in-memory databases, and high-performance computing clusters. The 64GB density point is the most widely ordered SKU for two-socket and four-socket mainstream servers using Intel Xeon 6 or AMD EPYC 9005-series platforms, where 12 or 24 DIMM slots are commonly populated. When designing with this module, verify that the platform's memory controller and BIOS support DDR5-5600 speed at the chosen slot population (1DPC vs 2DPC); 2 DIMMs per channel typically downshifts to DDR5-4400 or DDR5-4800. Ensure chassis airflow meets the module's thermal profile, as DDR5 RDIMMs dissipate more heat per DIMM than DDR4 predecessors because the PMIC is on-module rather than on the motherboard VR. This page synthesizes distributor pricing, JEDEC speed-bin context, and drop-in 64GB DDR5-5600 ECC RDIMM alternatives from Samsung and SK Hynix not consolidated on any single manufacturer datasheet, providing a single-page engineering reference for procurement and qualification engineers.

詢價 聯絡我們
MTC40F2047S1RC56BB1 - 128GB DDR5-5600 ECC RDIMM 2Rx4 | Micron
MTC40F2047S1RC56BB1

MTC40F2047S1RC56BB1 - 128GB DDR5-5600 ECC RDIMM 2Rx4 | Micron

The Micron MTC40F2047S1RC56BB1 is a 128 GB DDR5-5600 ECC Registered DIMM (RDIMM) operating at 1.1 V, organized as 2Rx4 with a PC5-44800 data rate and CL46 timing. Housed in a standard 288-pin DDR5 RDIMM module form factor, this server-class memory module is engineered for enterprise workloads including virtualization, compute nodes, and cloud platforms. A RDIMM (Registered DIMM) is a type of server memory module that includes a register buffer between the memory controller and the DRAM chips. This buffer reduces electrical loading on the memory controller, allowing systems to scale to higher memory densities and more DIMMs per channel. RDIMMs are part of the broader DDR5 SDRAM family, succeeding DDR4 with higher per-pin bandwidth, on-die ECC, and improved power efficiency via a 1.1 V supply. Key features of the MTC40F2047S1RC56BB1 include 128 GB capacity per module, 5600 MT/s transfer rate, 2Rx4 rank and organization, and JEDEC-compliant PC5-44800 specification. The module supports ECC for end-to-end data integrity critical in datacenter and mission-critical workloads. With 288 pins in the standard DDR5 RDIMM edge connector, this module is compatible with server platforms designed for DDR5 RDIMM memory. The MTC40F2047S1RC56BB1 uses Micron's server-class DDR5 SDRAM devices with PMIC (Power Management IC) on-module, a defining DDR5 feature that improves voltage regulation and power integrity versus DDR4. The registered buffer and on-module thermal sensor enable high-density configurations while maintaining signal integrity at 5600 MT/s operation. Typical applications include enterprise servers, cloud compute nodes, AI training and inference systems, virtualization hosts, in-memory databases, and high-performance computing clusters. The 128 GB per-module density is ideal for memory-intensive workloads such as SAP HANA, VMware vSAN, and large language model training. When deploying this module, validate compatibility with your server's qualified parts list (QPL). Mixing modules from different vendors in the same memory bank is generally supported but may trigger warnings in some platforms; check your BIOS for population guidelines and ensure the system firmware is current. This page synthesizes distributor pricing, drop-in alternatives, and practical deployment guidance not found in the manufacturer datasheet, with cross-references to compatible Micron SKUs (MTC40F2047S1RC56BB1R, MTC40F2047S1RC56BB2, MTC40F2047S1RC56B) sourced from Micron's RDIMM part catalog.

詢價 聯絡我們
MTCH102-I/MS - 2-Channel Capacitive Touch Controller, MSOP-8 | Microchip
MTCH102-I/MS

MTCH102-I/MS - 2-Channel Capacitive Touch Controller, MSOP-8 | Microchip

The Microchip Technology MTCH102-I/MS is a 2-channel capacitive proximity and touch controller with simple digital outputs, housed in an 8-pin MSOP package. Operating from 2.05 V to 3.6 V supply, it delivers configurable sensitivity and a low-power operating mode, making it suitable for battery-powered human-machine interfaces and replace-mechanical-button designs. What is a capacitive touch controller? A capacitive touch controller is a semiconductor device that detects changes in capacitance caused by a finger or conductive object approaching or touching a sensor pad. It belongs to the broader hierarchy: capacitive touch controller -> touch/proximity sensor -> sensor IC -> interface IC -> integrated circuit. Unlike resistive touch, capacitive sensing offers higher reliability, multi-touch potential, and immunity to mechanical wear, which is why capacitive touch controllers have largely replaced mechanical switches in consumer and industrial products. The MTCH102-I/MS features configurable sensitivity and a low-power mode that allows the device to balance noise immunity versus current consumption for each application. The integrated advanced optimization algorithm actively suppresses noise from the signal path, reducing false triggers in environments with switching supplies or RF interference. The device presents simple digital output signals, eliminating the need for host firmware to interpret raw capacitive data. Typical applications include consumer electronics, industrial control panels, white goods, IoT devices, smart home controls, and any system that needs to convert a mechanical key into a capacitive touch interface. The wide operating temperature range of -40°C to +85°C supports both indoor and outdoor installations. When designing with this device, place the sensor pads and guard traces correctly, follow the Microchip recommended PCB layout, and add adequate ground flooding around the sensing electrodes to maximize noise immunity. Decoupling capacitors must be placed as close as possible to the VDD pin.

詢價 聯絡我們
MTFC128GAVATTC-AIT - 1Tbit UFS 3.1 SLC NAND, 153-LFBGA | Micron
MTFC128GAVATTC-AIT

MTFC128GAVATTC-AIT - 1Tbit UFS 3.1 SLC NAND, 153-LFBGA | Micron

The Micron MTFC128GAVATTC-AIT is a 1 Tbit (128 GB) automotive-grade Universal Flash Storage (UFS) 3.1 memory IC built on Micron's 96-layer 3D NAND SLC technology, housed in a 153-ball LFBGA (11.5 mm x 13 mm) package. According to Micron's automotive UFS datasheet, it is designed for embedded storage in vehicle cockpit, ADAS, and infotainment platforms where high sequential throughput and AEC-Q100 reliability are required. Universal Flash Storage (UFS) is a JEDEC-standardized managed NAND interface (JESD220E and related MIPI UniPro / M-PHY physical layers) that replaced legacy eMMC by introducing a full-duplex, multi-lane serial architecture with command queues and embedded controller features. The UFS 3.1 generation doubles peak interface bandwidth versus UFS 2.1 and adds Write Booster, DeepSleep, and Host Performance Booster features, making it the preferred managed NAND for high-end automotive SoCs and 5G mobile platforms. Key features of the MTFC128GAVATTC-AIT include a UFS 3.1 interface with HS-Gear4 (x2 lane) operation, integrated NAND flash controller with strong ECC and bad-block management, and AEC-Q100 Grade 2 / Grade 3 qualification for automotive temperature ranges. The device operates from a 2.4 V to 2.7 V VCC supply and a separate 1.8 V VCCQ for the host interface, simplifying integration with 1.8 V application processors. SLC mode yields higher endurance and lower bit error rate than TLC alternatives in the same family. Typical applications span automotive infotainment head units, digital instrument clusters, ADAS sensor loggers, industrial gateways, and edge AI recorders. Its 11.5 mm x 13 mm LFBGA footprint is compatible with the broader Micron MTFC256GAVATTC-AIT (256 GB) and -AAT (consumer) variants, enabling one PCB layout to support multiple densities or temperature grades. When designing in this part, follow Micron's reference PCB layout for the 153-ball LFBGA, including 0.5 mm ball pitch escape routing, VCC decoupling with 1uF plus 0.1uF ceramics per power pin, and provision for a boot partition. Designers should also plan for the UFS reference clock stability and impedance-controlled MIPI M-PHY lanes to pass HS-Gear4 compliance.

詢價 聯絡我們
MTFC128GAVATTC-AIT-TR - 1Tbit UFS 3.1 SLC NAND Flash | Micron
MTFC128GAVATTC-AIT-TR

MTFC128GAVATTC-AIT-TR - 1Tbit UFS 3.1 SLC NAND Flash | Micron

The Micron MTFC128GAVATTC-AIT-TR is a 1 Tbit (128 GB) Universal Flash Storage (UFS) 3.1 memory IC built on SLC NAND technology, organized as 128G x 8 and housed in a 153-ball LFBGA (11.5 x 13 mm) surface-mount package supplied on tape and reel. A Universal Flash Storage (UFS) device is a JEDEC-standardized embedded non-volatile memory that integrates a NAND flash array with an on-die controller, presenting a high-speed serial interface to the host. UFS belongs to the broader category of managed NAND solutions, sitting between raw NAND (which requires an external controller) and full eMMC (its parallel-interface predecessor). UFS 3.1 specifically doubles the per-lane throughput of UFS 2.1, making it the preferred boot + bulk-storage medium in modern smartphones, automotive infotainment heads, and ADAS platforms. Key features of the MTFC128GAVATTC-AIT-TR include sequential read performance tuned for UFS 3.1 HS-Gear4 lanes, integrated LDPC error correction, deep power-down and hibernation modes for low standby current, and a wide industrial operating temperature range. The device supports a 2.4 V to 2.7 V supply range and a reference clock of 38.4 MHz. The 153-LFBGA package provides a compact footprint suitable for mobile and space-constrained embedded designs. Architecturally, the part uses Micron's 96-layer (or generation-equivalent) 3D SLC NAND array with a dedicated flash controller that handles wear-leveling, bad-block management, and thermal throttling. Compared with planar MLC/TLC UFS, the SLC variant delivers higher endurance, lower bit-error rate, and faster write latency, at the cost of lower density per die. Typical applications include automotive infotainment and telematics systems, industrial IoT gateways with on-board storage, AI edge inference modules logging sensor data, ruggedized handhelds, and high-end smartphone boot + data partitions where SLC endurance is preferred. The industrial temperature grade also suits outdoor surveillance and factory-floor equipment. When designing in this UFS device, ensure the host processor's UFS host interface (typically MIPI M-PHY + UniPro) supports the 3.1 revision and that PCB routing preserves the 90-ohm differential impedance of the HS-Gear lanes. Decoupling caps should be placed close to the VCC balls and a clean 38.4 MHz reference clock must be provided. This page synthesizes Micron distributor pricing, true drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet summary, helping engineers shortlist, qualify, and source the right UFS 3.1 device in days rather than weeks.

詢價 聯絡我們
MTFC256GAVATTC-AIT - 256GB UFS 2.1 SLC NAND Flash | Micron
MTFC256GAVATTC-AIT

MTFC256GAVATTC-AIT - 256GB UFS 2.1 SLC NAND Flash | Micron

The Micron MTFC256GAVATTC-AIT is a 256 GB automotive-grade Universal Flash Storage (UFS) 2.1 memory IC built on 3D SLC NAND technology and packaged in a 153-ball LFBGA (11.5 mm x 13 mm). Designed for harsh-environment automotive and industrial applications, the device operates over a -40C to +85C temperature range, delivers a UFS 2.1 interface at up to 38.4 MHz reference clock, and provides 2 Tbit of addressable memory organized for managed NAND workloads. The "AIT" suffix in the part number denotes the automotive-grade temperature and qualification tier. Universal Flash Storage (UFS) is a high-performance, low-power, non-volatile memory interface standardized by JEDEC for use in mobile phones, automotive infotainment, ADAS platforms, and embedded computing. UFS adopts a serial SCSI-based architecture with a differential MIPI M-PHY physical layer, replacing legacy parallel eMMC interfaces to deliver higher bandwidth, lower pin count, and built-in command queuing for multi-threaded access. The hierarchy is: NAND flash -> managed NAND -> UFS -> JEDEC JESD220C compliant memory IC. The MTFC256GAVATTC-AIT sits at the top of this hierarchy as a fully managed UFS device. Key differentiating features include AEC-Q100 automotive qualification, an integrated UFS 2.1 controller that handles wear-leveling, ECC, and bad-block management transparently to the host, and a wide 11.5x13 mm LFBGA-153 footprint optimized for reflow-compatible PCB assembly. Compared with raw NAND, the device eliminates host-side flash management complexity, allowing the host processor to issue standard SCSI commands over a high-speed serial link. Typical applications span automotive infotainment head units, ADAS sensor recorders, instrument clusters, industrial HMI panels, and ruggedized IoT gateways. The wide operating temperature range and AEC-Q100 qualification make it well suited for under-hood and outdoor deployments where consumer-grade eMMC would be unreliable. The 2 Tbit density supports full HD map databases, multiple camera stream buffering, and over-the-air update staging. When designing in this UFS device, follow the JESD220C reference schematic for VCC/VCCQ rail decoupling: a 1.0 µF X7R 0402 capacitor placed within 2 mm of each power ball is recommended. The host SoC must support a UFS 2.1 host controller with MIPI M-PHY HS-Gear-3 capability. PCB layout should keep the differential REF_CLK and data lanes length-matched within 0.5 mm to avoid setup/hold violations. Refer to the Micron automotive UFS datasheet for full reference design patterns. This page synthesizes current distributor pricing, parametric alternatives, and practical design notes that complement the manufacturer datasheet and accelerate engineer decision-making.

詢價 聯絡我們
MTFC32GAKAECN-4M IT - 256Gb eMMC MLC NAND Flash | Micron
MTFC32GAKAECN-4M IT

MTFC32GAKAECN-4M IT - 256Gb eMMC MLC NAND Flash | Micron

The Micron MTFC32GAKAECN-4M IT is an industrial-temperature e.MMC (Embedded MultiMediaCard) managed NAND flash memory IC with 256 Gbit (32 GB) of MLC NAND storage, supplied in a 100-ball TFBGA (14x18 mm) package. According to Micron's e.MMC product family datasheet, the device integrates a JEDEC e.MMC 5.0/5.1-compatible controller together with raw MLC NAND, exposing an 8-bit bus interface compliant with the MMC standard for embedded boot and bulk-storage roles. An e.MMC device is a managed NAND subsystem - it combines a raw MLC or TLC flash array with an on-die controller that runs FTL (flash translation layer), bad-block management, ECC, and wear-leveling firmware. As a category, e.MMC sits between raw NAND (which requires an external controller) and UFS (faster, command-queue-based, but more expensive) within the embedded memory hierarchy: raw NAND < e.MMC < UFS < SSD. The 'managed' property means designers only see a block-device interface, dramatically simplifying firmware compared with raw TLC/MLC designs. Key features include industrial operating temperature range (-40C to +85C) per the 'IT' suffix, sequential read performance of up to 250 MB/s on the e.MMC HS400 bus, and on-die hardware AES-128 encryption. The 100-ball TFBGA package has a 14x18 mm body with 1.0 mm ball pitch, and supports 1.8V or 3.3V VCCQ plus a 3.3V VCC supply rail. Micron's e.MMC uses an integrated MLC NAND die with proprietary controller firmware (firmware revision typically indicated by the trailing letter pair). The 256 Gbit density is exposed to the host as approximately 29.8 GiB of user-addressable space after format overhead, organized as a single boot partition plus up to four general-purpose user partitions. Typical applications include Linux/Android boot storage on industrial HMI panels, automotive infotainment mainboards, IoT gateways, point-of-sale terminals, and ruggedized single-board computers that require a soldered-down mass-storage solution. Industrial temperature grading makes it suitable for factory automation and outdoor signage where consumer-grade eMMC would fail thermal qualification. When designing with this device, ensure the host SoC supplies a stable 1.8V or 3.3V VCCQ and a 3.3V VCC rail, with the decoupling scheme from Micron reference design AN-3070 followed. A 4.7 uF bulk + 0.1 uF bypass capacitor pair placed within 5 mm of the balls is recommended for HS400 operation. This page synthesizes Micron-managed-NAND part numbering, distributor pricing, and engineering guidance - including alternative parts, comparison parameters, and PCB layout notes - not consolidated on the official Micron datasheet PDF.

詢價 聯絡我們
MTFC4GACAJCN-4M - 32Gb eMMC 5.0 NAND Flash 153-VFBGA | Micron
MTFC4GACAJCN-4M

MTFC4GACAJCN-4M - 32Gb eMMC 5.0 NAND Flash 153-VFBGA | Micron

The Micron MTFC4GACAJCN-4M is a 32 Gbit (4 GB) managed NAND flash device that integrates an industry-standard eMMC 5.0 MultiMediaCard controller with MLC NAND die in a single 153-ball VFBGA package measuring 11.5 x 13 mm. According to the Micron product listing, the device provides a serial eMMC interface (1-bit, 4-bit, and 8-bit modes) to the host processor while internally managing NAND wear-leveling, bad-block management, and ECC, presenting the host with a simple block-storage model. An eMMC (embedded MultiMediaCard) is a managed-NAND subsystem that combines raw NAND flash with a flash controller on the same substrate, exposing a standardized MMC interface to the host SoC. Within the memory hierarchy it sits between raw NAND (which requires a host-side controller) and NOR flash (used for execute-in-place code storage), making it a common boot-and-main-storage solution for cost- and power-constrained embedded systems. The MTFC4GACAJCN-4M operates from a single VCC of 2.7 V to 3.6 V and a dual-voltage VCCQ of 1.7 V to 1.95 V or 2.7 V to 3.6 V, allowing the device to interface directly with 1.8 V or 3.3 V SoC I/O domains. It is rated for the industrial temperature range of -40 C to +85 C (TA) and complies with JEDEC/MMC standard version 5.0, supporting HS200 and HS400 high-speed timing modes. Per the Win Source listing, the device is RoHS-compliant and uses a halogen-free green package. Typical applications include embedded Linux/Android boot storage for industrial gateways, automotive infotainment and telematics, point-of-sale terminals, surveillance NVR/DVR, IoT edge nodes, and any design that needs reliable managed-NAND storage without burdening the host CPU with raw-NAND FTL and ECC responsibilities. Designers should follow Micron's PCB layout and decoupling guidance for VFBGA packages to maintain signal integrity on the high-speed eMMC bus. This page synthesizes distributor pricing from DigiKey and Mouser, validated drop-in and same-family alternatives, and practical design notes that are not collected in the manufacturer datasheet alone.

詢價 聯絡我們