產品(42,000+)

MT42L64M32D2HE-18 - 2Gbit LPDDR2 SDRAM 533MHz | Micron
MT42L64M32D2HE-18

MT42L64M32D2HE-18 - 2Gbit LPDDR2 SDRAM 533MHz | Micron

The Micron Technology MT42L64M32D2HE-18 is a 2 Gbit Mobile Low-Power DDR2 (LPDDR2) SDRAM memory IC organized as 64M x 32 bits, operating at a maximum clock frequency of 533 MHz, housed in a 134-ball VFBGA package measuring 10 x 11.5 mm. LPDDR2 SDRAM is a class of DRAM optimized for low power consumption in battery-operated and thermally constrained systems. Unlike standard DDR SDRAM, LPDDR2 uses a 1.2V core supply, operates at lower voltages on its I/O, and supports power-down, self-refresh, and deep-power-down modes that dramatically reduce standby current. Within the memory hierarchy, LPDDR2 sits between the older LPDDR (LPDDR1) and the newer LPDDR3/LPDDR4 standards, offering a fly-by-free parallel interface with CA pin command/address multiplexing. Key features of this device include the 2 Gbit density in a single 64M x 32 organization, 533 MHz operation (LPDDR2-S4 class), industrial temperature rating of -40C to +85C for the IT:D variant, and the compact 134-VFBGA (10 x 11.5 mm) package that conserves board area in space-limited designs. The D suffix in the part number denotes die revision and a lead-free/RoHS-compliant package. Architecturally, the MT42L64M32D2HE implements multiple internal banks with burst access, supporting both non-multiplexed and multiplexed addressing. The x32 I/O organization reduces bus turnaround latency compared with narrower organizations, improving effective bandwidth in real-time embedded workloads. Low-voltage signaling lowers I/O switching power, which is critical for handheld and connected devices. Typical applications include portable media players, tablet and e-reader main memory, networking and communication equipment buffers, industrial human-machine interfaces, and automotive infotainment (using the AAT:D/AUT:D temperature variants of the same die). Design consideration: LPDDR2 requires careful PCB length matching on the CA, DQ, and DQS signal groups, plus regulated 1.2V core and VDDQ rails; consult the Micron LPDDR2 datasheet for tCK tolerances and ZQ calibration requirements before layout. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
MT47H128M16RT-25EIT:C - 2Gb DDR2 SDRAM, 128Mx16, 400 MHz | Micron
MT47H128M16RT-25EIT:C

MT47H128M16RT-25EIT:C - 2Gb DDR2 SDRAM, 128Mx16, 400 MHz | Micron

The Micron MT47H128M16RT-25EIT:C is a 2 Gigabit DDR2 SDRAM organized as 128M words x 16 bits in a 84-ball Fine-pitch BGA (9x12.5 mm) package, operating at a 400 MHz clock rate with a 2.5 ns access time. It belongs to Micron's MT47H family of JEDEC-standard 1.8V DDR2 SDRAMs and is the IT (Industrial Temperature) speed grade E variant in Tray packaging. A DDR2 SDRAM (Double Data Rate 2 Synchronous Dynamic Random-Access Memory) is a volatile memory IC that transfers data on both clock edges, doubling peak throughput versus single-data-rate SDRAM at the same clock frequency. DDR2 builds on DDR with lower voltage (1.8V vs 2.5V), higher prefetch (4n-bit vs 2n-bit), on-die termination, and stricter signal integrity requirements, making it a member of the SDRAM family inside the broader DRAM > Memory IC > Semiconductor taxonomy. Key features include a 4n-bit prefetch architecture, differential data strobe (DQS/DQS#), SSTL_18-compatible 1.8V I/O, VDD and VDDQ both at 1.8V +/-0.1V, and an 8-bank internal organization for concurrent operations. The 84-ball FBGA footprint is JEDEC-standard and pin-compatible across density variants in the MT47H family. The -25E speed grade specifies a tRCD/tRP of 13.125 ns and a tCK minimum of 2.5 ns, equivalent to DDR2-800 (CL5) operation. Typical applications include legacy industrial controllers, networking line cards, set-top box main memory, printer image buffers, and any 1.8V main-memory subsystem designed around DDR2-800 with x16 organization. The industrial temperature range (-40C to +85C) supports factory-floor and outdoor enclosures. When designing with this device, follow JEDEC DDR2 PCB layout guidelines for controlled-impedance 50 ohm single-ended traces, 100 ohm differential DQS pairs, and VREF supply decoupling. The MT47H128M16RT-25EIT:C is pin-compatible with other MT47H128M16 speed grades (-25, -3, -37) and density variants, enabling simple BOM scaling. This page synthesizes distributor pricing, verified Micron drop-in alternatives within the MT47H family, and JEDEC-aligned design notes not collected in a single place on the manufacturer datasheet.

詢價 聯絡我們
MT47H64M16HR-25E IT:H - 1Gb DDR2 SDRAM 400MHz 84-FBGA | Micron
MT47H64M16HR-25E IT:H

MT47H64M16HR-25E IT:H - 1Gb DDR2 SDRAM 400MHz 84-FBGA | Micron

The Micron MT47H64M16HR-25E IT:H is a 1 Gbit DDR2 SDRAM organized as 64M words x 16 bits, housed in a 84-ball Fine-Pitch BGA (8 mm x 12.5 mm) package with 400 MHz clock rate and 400 ps access time. The device supports a 1.8 V supply (VDD 1.8 V ±0.1 V, VDDQ 1.8 V ±0.1 V) and uses SSTL_18-compatible I/O. What is DDR2 SDRAM? DDR2 (Double Data Rate 2) Synchronous DRAM is the second generation of DDR memory technology, succeeding DDR1. It uses a 4n-bit prefetch architecture (vs 2n-bit in DDR1) to double the data rate per I/O pin without increasing the core clock frequency. Within the broader memory taxonomy, DDR2 SDRAM sits under DRAM -> volatile memory -> semiconductor memory. Compared with DDR3, DDR2 operates at lower voltages (1.8 V vs 1.25 V nominal) and lower data rates, but remains widely deployed in legacy industrial, networking, and embedded designs where long lifecycles and proven reliability outweigh the need for maximum bandwidth. Key features of the MT47H64M16HR-25E IT:H include the JEDEC-standard 1.8 V I/O (SSTL_18-compatible) interface, differential data strobe (DQS, DQS#) for robust signal capture, and a duplicate output option for reduced loading. The 4n-bit prefetch architecture transfers 4 data words per internal clock cycle, achieving 800 MT/s effective data rate at the 400 MHz clock speed. The 84-ball TFBGA package is footprint-compatible with the broader MT47H family, enabling PCB reuse across density options. The MT47H family is built on a CMOS process with on-die termination (ODT) and programmable CAS latency (CL), and supports self-refresh mode for low-power standby. The IT:H suffix designates the industrial temperature grade (-40C to +85C) with RoHS-compliant lead-free packaging, making the part suitable for harsh-environment and long-lifecycle applications where consumer-grade parts would fail. Typical applications include networking line cards and switches, industrial controllers and HMI panels, automotive infotainment systems, printer imaging buffers, and legacy embedded computing platforms. The 400 MHz / 800 MT/s data rate is sufficient for Gigabit Ethernet frame buffers, video processing pipelines, and OS image storage in mid-range embedded systems. When designing with this device, ensure the host controller supports DDR2 timing parameters (tRCD, tRP, tRFC) and that the PCB layer stack-up is tuned for 1.8 V SSTL_18 signaling with controlled impedance. Use matched-length routing for the DQS/DQS# differential pair and follow JEDEC SSTL_18 termination guidelines. The IT:H temperature grade supports industrial environments; for automotive applications requiring -40C/+105C, evaluate the MT47H64M16HR-25E AIT:H variant instead. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, providing an information-gain reference for engineers specifying DDR2 memory.

詢價 聯絡我們
MT47H64M16HR-3:G - 1Gb DDR2 SDRAM 333MHz | Micron | 84-FBGA
MT47H64M16HR-3:G

MT47H64M16HR-3:G - 1Gb DDR2 SDRAM 333MHz | Micron | 84-FBGA

The Micron MT47H64M16HR-3:G is a 1 Gbit DDR2 SDRAM organized as 64 Meg x 16 (8 Meg x 16 x 8 banks) with a 333 MHz clock rate (DDR2-667, 3 ns cycle time), 450 ps access time, and a 1.8 V supply, housed in an 84-ball FBGA (8 x 12.5 mm) package. It is a JEDEC-standard DDR2 SDRAM with SSTL_18-compatible I/O and differential data strobe (DQS, DQS#). DDR2 SDRAM (Double Data Rate 2 Synchronous Dynamic Random-Access Memory) is a volatile memory technology that transfers data on both the rising and falling edges of the clock, doubling throughput versus single-data-rate SDRAM. DDR2 builds on DDR1 with a 4n-bit prefetch architecture, on-die termination (ODT), and a lower 1.8 V core and I/O voltage, which reduces power versus 2.5 V DDR1. In the memory hierarchy, DDR2 SDRAM sits between the memory controller and the DRAM array, providing the working memory for embedded processors, networking equipment, and legacy computing platforms. Key features of the MT47H64M16HR-3:G include a 1 Gbit density in a 64M x 16 configuration, 333 MHz clock (667 MT/s data rate), 450 ps access time, 1.7 V to 1.9 V supply voltage, and an 84-FBGA (8 x 12.5 mm) package. The device supports programmable CAS latency (CL=3 for the -3 speed grade), burst lengths of 4 or 8, and sequential or interleaved burst types. The differential data strobe (DQS/DQS#) improves signal integrity at high data rates, while the 4n-bit prefetch architecture enables high bandwidth with a modest internal clock. The MT47H64M16HR-3:G uses Micron's DDR2 process technology with an on-chip DLL for clock synchronization and ODT for impedance matching. The 8-bank architecture allows concurrent operations across banks, improving effective bandwidth. The 1.8 V SSTL_18 I/O interface is compatible with JEDEC-standard DDR2 memory controllers, and the 84-FBGA package provides a compact footprint for space-constrained embedded designs. Typical applications include embedded computing platforms, industrial control systems, networking and telecom equipment, legacy computing and server memory upgrades, and test and measurement instrumentation. The 1 Gbit density and 333 MHz speed make it suitable for designs requiring moderate memory capacity with DDR2-era memory controllers. When designing with this device, ensure proper termination and impedance matching on the DDR2 bus, and verify that the memory controller supports the -3 speed grade (CL=3, 333 MHz). The 1.8 V supply must be well-regulated and decoupled to maintain signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single reference for the MT47H64M16HR-3:G DDR2 SDRAM.

詢價 聯絡我們
MT47H64M16NF-25E AIT:M TR - 1Gb DDR2 SDRAM 400MHz | Micron
MT47H64M16NF-25E AIT:M TR

MT47H64M16NF-25E AIT:M TR - 1Gb DDR2 SDRAM 400MHz | Micron

The Micron Technology MT47H64M16NF-25E AIT:M TR is a 1 Gbit DDR2 SDRAM organized as 64M x 16, operating from a 1.8V supply at a 400 MHz clock rate (DDR2-800, 800 MT/s) with a 400 ps access time, housed in an 84-ball FBGA (8 x 12.5 mm) package supplied on tape and reel. DDR2 SDRAM (Double Data Rate 2 Synchronous Dynamic Random Access Memory) is a type of volatile DRAM that transfers data on both rising and falling edges of the clock, doubling the effective data rate of the earlier DDR generation. Within the memory hierarchy, it sits below modern DDR3/DDR4 devices but remains widely used in embedded and industrial platforms: DRAM -> synchronous DRAM -> DDR SDRAM -> DDR2 SDRAM -> memory IC. DDR2 devices use a 4n prefetch architecture, on-die termination (ODT), and posted CAS additive latency to sustain high bus efficiency. Key features of this device include the automotive AIT grade, qualified to AEC-Q100, and a wide operating temperature range of -40C to +95C, making it suitable for under-hood-adjacent and harsh-environment applications. The 16-bit data bus organization simplifies 32-bit and 64-bit bus designs by paralleling two or four devices. The FBGA package minimizes inductance and supports high signal integrity at DDR2-800 speeds. The :M designation denotes the lead-free (RoHS) matte-tin ball finish option. The device supports standard DDR2 features including burst lengths of 4 and 8, CAS latency options, and programmable drive strength. According to Micron product documentation, the -25E speed grade corresponds to DDR2-800 operation at CL5 with a 1.8V +/- 0.1V supply rail. Typical applications include automotive infotainment and telematics memory, industrial control and human-machine interface (HMI) systems, networking equipment buffering, and test instrumentation working memory. Designers should implement proper fly-by or daisy-chained DDR2 bus topology with on-die termination enabled and follow Micron's layout guidelines for length matching and reference-plane continuity to maintain signal integrity at 400 MHz. This page adds value beyond the datasheet by synthesizing distributor availability, drop-in alternatives, comparison tables, and practical design notes in a single reference.

詢價 聯絡我們
MT47H64M16NF-25EAIT - 1Gb DDR2 SDRAM 84-FBGA | Micron
MT47H64M16NF-25EAIT

MT47H64M16NF-25EAIT - 1Gb DDR2 SDRAM 84-FBGA | Micron

The Micron MT47H64M16NF-25EAIT is a 1 Gbit DDR2 SDRAM organized as 8 Meg x 16 x 8 banks, supplied in a 84-ball Fine-pitch BGA (8 mm x 12.5 mm) package. Operating on a 400 MHz internal clock with 400 ps typical CAS latency, this device delivers up to 800 MT/s data transfer rate per pin in compliance with the JEDEC DDR2 standard. The -25E speed grade supports a tCK of 2.5 ns with a 1.8 V +/- 0.1 V supply (VDD/VDDQ) and is qualified across the industrial temperature range (-40C to +85C). DDR2 SDRAM is a synchronous dynamic random-access memory technology standardized by JEDEC (JESD79-2 series). It supersedes DDR by introducing on-die termination (ODT), lower supply voltage (1.8 V versus 2.5 V), and a stub-series terminated logic interface that enables higher data rates. As a memory IC, it sits within the broader hierarchy of volatile DRAM -> volatile memory -> memory IC -> integrated circuit -> semiconductor, serving as the working memory backbone in computing platforms that need high bandwidth at moderate power. Key features of the MT47H64M16NF-25EAIT include an 8-bank architecture with burst lengths of 4 and 8, additive latency support, write leveling, and an on-die temperature sensor (TS). The 16-bit prefetch architecture doubles the data rate relative to the internal clock, while OCD calibration and ODT termination settings are programmable through the DDR2 mode register set. The 84-ball FBGA substrate provides a compact footprint suitable for space-constrained embedded designs. Internally, the MT47H64M16NF-25EAIT uses a 1.8 V pseudo-open-drain SSTL_18 interface compatible with standard DDR2 controllers. Its 8-bank architecture enables concurrent operation of multiple pages, improving effective bandwidth under random-access workloads. Auto-refresh and self-refresh modes ensure data retention at typical self-refresh current of approximately 3 mA. The die is fabricated on a CMOS process tuned for low leakage, and the FBGA package offers matched-length trace routing for clean signal integrity at the rated speed. Typical applications include networking routers and switches, printers and MFP imaging pipelines, industrial control boards, and embedded computing platforms (single-board computers, FPGA-based SoCs) that require 128 MB or 256 MB of main memory. The wide 16-bit data bus makes it particularly attractive for graphics frame buffers and video processing blocks. The industrial temperature grade and RoHS-compliant FBGA support deployment in harsh environments. When designing with this device, allocate a 4-layer PCB with controlled-impedance 50-ohm differential routing for the clock and command/address group. Match DQ/DQS trace lengths within the tolerances specified in JEDEC DDR2 design guidelines, and place VTT termination resistors close to the controller side. Reference Micron's TN-47-08 layout note for the recommended via-in-pad escape scheme for the 84-ball FBGA. This page synthesizes distributor pricing, drop-in alternatives, timing parameter comparison, and layout guidance not assembled in any single Micron datasheet or distributor page.

詢價 聯絡我們
MT48LC16M16A2BG-75 IT:D - 256Mbit SDRAM 133MHz | Micron
MT48LC16M16A2BG-75 IT:D

MT48LC16M16A2BG-75 IT:D - 256Mbit SDRAM 133MHz | Micron

The Micron Technology MT48LC16M16A2BG-75 IT:D is a 256 Mbit (16M x 16) SDRAM organized as 16 mega-words by 16 bits, operating at 133 MHz (7.5 ns / -75 speed grade) in a 54-ball VFBGA (8x14) surface-mount package. The IT suffix indicates the industrial temperature grade (-40C to +85C) and the :D designator marks the die revision per Micron's SDRAM datasheet family. The device operates from a single 3.3V supply (3.0 V to 3.6 V) and is fully PC100- and PC133-compliant. An SDRAM (Synchronous Dynamic Random-Access Memory) is a type of volatile DRAM that synchronizes all operations to a system clock, enabling pipelined command execution and higher throughput than asynchronous DRAM. SDRAM sits within the memory IC hierarchy: SDRAM -> DRAM -> volatile memory -> memory IC -> semiconductor. The MT48LC16M16A2 is a member of Micron's legacy 256Mb SDRAM family (16Mx16, 32Mx8, and 64Mx4 configurations) introduced in the late 1990s and now classified as obsolete by Micron. Key features include a 133 MHz synchronous interface with all address and control signals registered on the positive clock edge, internal pipelined architecture that allows column-address changes every clock cycle, programmable CAS latency (2 or 3), burst read/write modes, and auto-refresh plus self-refresh support. The 54-VFBGA package provides a compact footprint suitable for space-constrained embedded designs, while the parallel 16-bit data bus delivers up to 266 MB/s peak bandwidth. Typical applications include legacy networking equipment, industrial control systems, point-of-sale terminals, telecommunications infrastructure, and embedded computing platforms that require reliable, high-bandwidth main memory. Designers should consult the Micron SDRAM datasheet for refresh scheduling, mode-register configuration, and PC133 timing parameters. For new designs, Micron recommends migrating to DDR/DDR2/DDR3 or newer DRAM families, as this part is in Micron's obsolete product catalog with limited long-term availability.

詢價 聯絡我們
MT48LC16M16A2FG-75TR - 256Mbit 16Mx16 133MHz SDR SDRAM | Micron
MT48LC16M16A2FG-75TR

MT48LC16M16A2FG-75TR - 256Mbit 16Mx16 133MHz SDR SDRAM | Micron

The Micron MT48LC16M16A2FG-75TR is a 256 Mbit SDR SDRAM organized as 16M x 16 with a 133 MHz parallel interface, housed in a 54-ball VFBGA (8x14 mm) package and supplied in Tape and Reel packaging. It operates from a single 3.3V supply and is fully PC100- and PC133-compliant, with all signals registered on the positive edge of the system clock. What is an SDR SDRAM? An SDR (Single Data Rate) SDRAM is a synchronous dynamic random-access memory that transfers one data word per clock cycle, sitting one generation before DDR SDRAM in the evolution of synchronous DRAM. It belongs to the broader category of volatile memory ICs, ranking alongside SRAM and DDR/DDR2/DDR3 SDRAM, and forms part of the semiconductor memory hierarchy under the integrated circuit (IC) family. SDR SDRAM is commonly used as cost-effective main memory in legacy embedded and industrial systems where DDR is not required. Key features include a 5.4 ns access time at 133 MHz, internal pipelined 4-bank architecture, programmable CAS Latency (2/3), and self-refresh mode. The 16-bit data bus (x16 organization) gives 256 Mbit of storage with a standard LVTTL interface, while the VFBGA 54-ball package (8x14 mm) keeps the PCB footprint small for space-constrained designs. Architecturally, the device uses four internal banks that can be operated independently, allowing interleaved access for higher sustained throughput. The synchronous interface, internal pipelining, and burst-of-1, 2, 4, 8, or full-page read/write modes deliver high bandwidth with low latency for the supported 100/133 MHz clock rates. The Micron design supports auto refresh and self refresh to maintain data integrity in low-power standby modes. Typical applications include legacy industrial PCs, networking routers and switches, printers and imaging equipment, set-top boxes, and embedded computing platforms that retain an SDR SDRAM memory controller. It is also found in PC100/PC133 main-memory modules and test/measurement hardware where a known-good, mature memory interface is required. When designing with this device, ensure the PCB layout follows JEDEC trace-length and impedance rules for SSTL-2 signaling, keep VDD/VDDQ decoupling within a few millimeters of the balls, and provide proper clock-to-DQS alignment. The -75 speed grade guarantees 7.5 ns clock access time at 133 MHz, so verify tRCD and tRP against the chosen CAS Latency. This page consolidates distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate availability and second-source options for legacy SDRAM designs.

詢價 聯絡我們
MT48LC16M16A2P-7E:D - 256Mbit SDRAM x16 133MHz 54-TSOP II | Micron
MT48LC16M16A2P-7E:D

MT48LC16M16A2P-7E:D - 256Mbit SDRAM x16 133MHz 54-TSOP II | Micron

The Micron MT48LC16M16A2P-7E:D is a 256 Mbit Synchronous DRAM (SDRAM) organized as 16M words x 16 bits per word, supplied in a 54-pin TSOP II package, and qualified to the -7E speed grade for 133 MHz (PC133) operation. The :D suffix denotes the RoHS-compliant, lead-free matte-tin finish and tray packaging. It operates from a 3.3 V (3.0 V - 3.6 V) supply and presents a fully synchronous, LVTTL-compatible parallel interface with all address and data signals registered on the positive edge of the system clock. What is SDRAM? Synchronous DRAM is a generation of dynamic random-access memory whose read, write, and refresh operations are timed by a free-running system clock rather than by asynchronous control signals. SDRAM occupies a position in the memory hierarchy above asynchronous DRAM and below subsequent generations such as DDR, DDR2, and DDR3; it is the parent category that includes PC66, PC100, and PC133 variants used in late-1990s and early-2000s computing, networking, and embedded systems. Within a system-on-chip or processor board, SDRAM typically functions as the main off-chip working memory, sitting between the CPU/ASIC and any non-volatile storage. Key features of the MT48LC16M16A2P-7E:D include a 5.4 ns clock access time, an internal pipelined architecture that allows the column address to be changed every clock cycle, four internal banks for concurrent operation, programmable CAS latency (2 or 3), programmable burst length (1, 2, 4, 8, or full page), and auto-refresh plus self-refresh modes. The 16-bit data bus supports PC100 and PC133 compliance, while a deep, pipelined internal organization enables sustained throughput approaching the theoretical peak for the chosen bus width. Typical applications include industrial controllers, networking line cards, set-top boxes, printers, and legacy PC mainboards where 256 Mbit of low-cost, high-density, byte- or word-oriented working memory is required. The wide x16 data interface is convenient for color LCD frame buffers, DSP program/data stores, and 16-bit or 32-bit microprocessor external memory expansions. PC133 timing ensures compatibility with legacy host controllers and the Via/Intel chipsets of that era. When designing with this device, ensure that VDD and VDDQ are decoupled with 0.1 uF and 0.01 uF capacitors placed close to the pins, that all address/control traces are length-matched for clean clock-edge capture, and that a proper SSTL- or LVTTL-compatible clock with controlled impedance is provided. The self-refresh current should be budgeted for battery-backed or low-power standby use. This page synthesizes distributor pricing for the Micron MT48LC16M16A2P-7E:D, drop-in equivalent SDRAM candidates from Micron's own catalogue and cross-brand Alliance Memory alternatives, plus practical design notes not consolidated on any single manufacturer page.

詢價 聯絡我們
MT48LC4M32B2B5-7G - 128Mb x32 SDRAM 143MHz | Micron
MT48LC4M32B2B5-7G

MT48LC4M32B2B5-7G - 128Mb x32 SDRAM 143MHz | Micron

The Micron MT48LC4M32B2B5-7G is a 128 Megabit (4M x 32-bit) Synchronous DRAM (SDRAM) organized as four internal banks, operating from a 3.0 V to 3.6 V single supply and packaged in a 90-ball 8 mm x 13 mm VFBGA (Tape and Reel). It delivers a 143 MHz maximum clock rate with a 5.5 ns access time and uses a fully synchronous interface with LVTTL-compatible I/O, an internal pipelined architecture, and programmable CAS latency of 2 or 3 clocks. What is SDRAM? Synchronous DRAM is a generation of dynamic random-access memory that synchronizes all address, data, and control signals to a free-running system clock, in contrast to the asynchronous DRAM used in earlier PCs. Within the memory hierarchy, SDRAM sits above asynchronous DRAM and below Double Data Rate SDRAM (DDR), and within modern computing platforms it remains a low-cost, low-power solution for embedded graphics, networking line cards, set-top boxes, and industrial HMI where x32 bus width is convenient and DDR is unnecessary. SDRAM -> DRAM -> volatile memory -> semiconductor IC is the standard taxonomy. Key features of the MT48LC4M32B2B5-7G include auto-refresh (64 ms / 4096 rows), self-refresh mode, four-bank operation with concurrent bank precharge, and a programmable burst length of 1, 2, 4, 8, or full page with sequential or interleave burst type. The device supports LVTTL levels on all inputs and outputs, has a deep power-down mode, and provides a CKE pin for clock enable/disable and clock suspend operation, enabling fine-grained power management in battery-backed or intermittently active systems. Architecturally the part uses an internal pipelined 2n-prefetch architecture that allows the column address to change on every clock cycle, enabling fully random access. The four-bank design lets one bank be precharged while another is being accessed, which hides precharge cycles and sustains high throughput. The x32 organization maps directly to common 32-bit embedded buses such as 32-bit microcontrollers and DSPs, eliminating bus-width glue logic in many designs. Typical applications include graphics buffers in laser printers and POS terminals, frame stores in industrial cameras, SDRAM expansion for 32-bit microcontrollers (PIC32MZ, STM32, NXP i.MX external memory bus), networking line cards and DSLAM buffers, and main memory for low-cost FPGA soft-core processors such as Nios II and MicroBlaze. The wide x32 data bus makes the part especially attractive where the host is already 32 bits wide. When designing with the MT48LC4M32B2B5-7G, follow Micron TN-48-05 layout guidelines - matched-length clock, address, and command traces, a clean 3.3 V analog supply with local decoupling, Vss/VddQ noise isolation, and proper SSTL-style termination if multiple loads are present. Note that the -7G speed grade is the 143 MHz / CL3 commercial variant; the -7 IT:G variant is the industrial-temperature equivalent for -40 C to +85 C operation, and the -6A variant is the slower 166 MHz pin-compatible grade. This page synthesizes distributor pricing, drop-in speed-grade alternatives within the same Micron x32 SDRAM family, and practical PCB design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MT48LC4M32B2P-6:G - 128Mb x32 SDRAM, 167MHz, 86-TSOP II | Micron
MT48LC4M32B2P-6:G

MT48LC4M32B2P-6:G - 128Mb x32 SDRAM, 167MHz, 86-TSOP II | Micron

The Micron MT48LC4M32B2P-6:G is a 128 Mbit Synchronous DRAM (SDRAM) organized as 4 Meg x 32 bits across 4 internal banks, delivered in a 86-pin TSOP II surface-mount package. Operating from a single +3.3V ±0.3V supply, it supports a clock rate of up to 167 MHz with a 5.5 ns random access time, providing a synchronous parallel interface for high-bandwidth memory subsystems. An SDRAM (Synchronous Dynamic Random Access Memory) is a volatile memory that synchronizes all address, data, and control signals to a master clock, allowing burst-oriented transfers at one word per clock cycle. SDRAM sits in the broader hierarchy: dynamic RAM -> volatile memory -> DRAM IC -> memory IC -> semiconductor. Compared with asynchronous DRAM, SDRAM enables higher throughput by overlapping bank precharge with row activation, hiding precharge cycles behind active accesses. Key features of the MT48LC4M32B2P-6:G include LVTTL-compatible inputs and outputs, programmable CAS latency of 1, 2, or 3 clocks, burst length options of 1, 2, 4, 8, or full page, and sequential or interleaved burst type. The device supports auto precharge and auto refresh, with a 64 ms refresh window distributed across 4096 refresh cycles. An internal pipelined architecture achieves the 2n-prefetch operation while allowing the column address to change on every clock cycle for fully random access. Typical applications include networking line cards, set-top box buffers, industrial control mainboards, mid-range graphics frame buffers, and embedded systems requiring high-density synchronous memory. The x32 organization reduces address-line count for wide data buses and pairs naturally with 32-bit processors and ASICs. When designing with this SDRAM, ensure VDDQ decoupling uses 0.1 µF plus 10 µF bulk capacitors placed close to the supply pins, maintain proper trace impedance for clock and DQ lines, and verify tRCD/tRP timing budgets at the chosen CAS latency. The -6 speed grade corresponds to a 167 MHz clock (6 ns clock period). This page synthesizes distributor pricing from DigiKey, drop-in alternatives from the Micron SDRAM family and cross-brand equivalents, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
MT48LC8M16A2P-75IT - 128Mb SDRAM 8Mx16 133MHz 54-TSOP II
MT48LC8M16A2P-75IT

MT48LC8M16A2P-75IT - 128Mb SDRAM 8Mx16 133MHz 54-TSOP II

The Micron MT48LC8M16A2P-75IT is a 128-Mbit synchronous DRAM (SDRAM) organized as 8M x 16 bits, housed in a 54-pin TSOP II surface-mount package. The part runs from a single 3.3 V supply, delivers a 133 MHz clock rate (7.5 ns clock period, -75 speed grade), and provides a parallel LVTTL interface ideal for main-memory and frame-buffer roles. The "IT" temperature grade covers the industrial -40C to +85C range, while the "75" speed grade corresponds to a 133 MHz tCK. An SDRAM is a dynamic random-access memory synchronized to a system clock, internally divided into multiple banks that allow interleaved read/write bursts. SDRAM sits in the memory hierarchy between processor registers and bulk storage, displacing older asynchronous DRAM by adding burst-mode access, programmable CAS latency, and pipeline-friendly timing. SDRAM is the predecessor of DDR SDRAM and is now used primarily for legacy systems, industrial controllers, and cost-sensitive embedded designs where compatibility outranks raw data rate. Key features of the MT48LCM16A2P family include 4 internal banks (BA0/BA1), programmable burst lengths of 1, 2, 4, 8 or full-page, programmable CAS latency of 2 or 3, auto-refresh and self-refresh modes, and a 64 ms refresh period (8192 refresh cycles). The 16-bit data bus with two-byte DQ masking (LDQM/UDQM) simplifies 16-bit and 32-bit host connections. A 5.4 ns random access (tAC) supports high-throughput page-mode bursts. The device uses a 3.3 V CMOS process with internal VREF and clock-alignment, an on-chip delay-locked loop is NOT present (this is an SDR part, not DDR). It conforms to the JEDEC 54-TSOP II 0.400" outline. The package carries a single die routed to bond pads, then to 54 gull-wing leads on 0.8 mm pitch; the pinout follows the JEDEC 54-TSOP-II 8Mx16 standard with one additional pin reserved (NC). Typical applications include embedded industrial controllers, legacy networking line cards, point-of-sale terminals, printers, medical instrumentation, and replacement of older 128Mbit SDRAM designs. The wide industrial temperature grade suits outdoor or factory-floor deployments, and the 128Mb density matches the working memory size of older PowerPC, MIPS, ARM7/ARM9 SoCs that natively support SDRAM. When designing with this part, populate VDD and VSSQ with 0.1 uF + 10 uF decoupling placed within 5 mm of each supply pin, and tie CKE high during normal operation. PCB layout must route clocks with 50 ohm controlled impedance and keep DQs byte-grouped to maintain skew budget; unmatched traces cause burst errors at 133 MHz. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select between industrial/commercial temperature grades, speed bins, and modern replacements.

詢價 聯絡我們
MT48V8M32LFB5-8 - 256Mbit Mobile SDRAM, 125 MHz, 90-VFBGA | Micron
MT48V8M32LFB5-8

MT48V8M32LFB5-8 - 256Mbit Mobile SDRAM, 125 MHz, 90-VFBGA | Micron

The Micron MT48V8M32LFB5-8 is a 256-Mbit Mobile Low-Power SDRAM (LPSDR) organized as 8M words x 32 bits, supplied in a compact 90-ball VFBGA (8x13 mm) package. Per Micron's mobile SDRAM datasheet family, the device supports a parallel interface clocked up to 125 MHz (8 ns tCK / -8 speed grade), delivering a peak data rate of 250 MT/s per I/O on a 32-bit bus and is qualified for low-power handheld and battery-backed embedded designs. What is Mobile SDRAM? Mobile SDRAM (Synchronous DRAM) is a class of low-power synchronous DRAM derived from the JEDEC SDRAM standard, designed for portable, battery-powered systems where standby current and partial-array refresh features directly determine battery life. Within the memory hierarchy, Mobile SDRAM sits between commodity SDRAM and higher-density LPDDR/LPDDR2; it provides synchronous burst access, programmable CAS latency, and partial-array self-refresh (PASR) while remaining pin-compatible with standard SDRAM controllers. Mobile SDRAMs are commonly used as the main working memory in feature phones, PDAs, portable media players, GPS receivers, and industrial handhelds that need SDRAM-like bandwidth but cannot tolerate the higher standby current of conventional SDRAM. Key features of the MT48V8M32LFB5-8 include 256 Mbit density (8M x 32), internal banks organized for high-throughput burst access, and selectable PASR modes that let the system retain only a portion of the array in self-refresh, dramatically cutting standby current. The device supports standard SDRAM commands (MR, REF, ACT, PRE, READ, WRITE) with programmable CAS latency and burst length, simplifying integration with general-purpose SDRAM controllers and embedded MPUs that lack native LPDDR support. Operating from a single 3.3 V supply (Vdd/Vddq), the device is targeted at mobile platforms where 1.8 V LPDDR is unnecessary but extended battery life is required. Architecturally, the device uses a 4-bank internal structure with synchronous pipelined access and on-chip refresh, packaged in a fine-pitch 90-ball VFBGA measuring 8 mm x 13 mm. This small form factor makes the part suitable for space-constrained portable products while the x32 organization reduces chip-enable count on the host bus. According to Micron's mobile SDRAM datasheet, the -8 speed grade corresponds to a 125 MHz clock and 7 ns access time at CAS latency 3. Typical applications include handheld GPS terminals, portable medical data loggers, feature-phone baseband subsystems, industrial barcode scanners, and ruggedized handheld terminals that pair a low-power application processor with a 32-bit SDRAM interface. The wide-word organization is convenient for processors with 32-bit external memory buses, removing the need for two x16 devices in parallel. When designing in this part, follow the VFBGA PCB layout guidelines in Micron's TN-00-08 application note: route the clock net with controlled impedance, match DQ/DQS trace lengths within a tight skew budget, and provide solid ground planes beneath the BGA to suppress simultaneous switching noise. Decoupling must include a 0.1 uF ceramic capacitor per Vdd/Vddq pin pair placed as close as physically possible to the package balls. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, providing an independent reference for engineers selecting Mobile SDRAM for low-power embedded designs.

詢價 聯絡我們
MT4LC4M16R6TG-5 - 4M x 16 EDO DRAM, 50-pin TSOP | Micron
MT4LC4M16R6TG-5

MT4LC4M16R6TG-5 - 4M x 16 EDO DRAM, 50-pin TSOP | Micron

The Micron MT4LC4M16R6TG-5 is a 4 Meg x 16 Extended Data-Out (EDO) dynamic random-access memory organized as 67,108,864 words of 16 bits each, packaged in a 50-pin TSOP (Type II) form factor and designed for a single +3.3V ±0.3V power supply. It features a -5 speed grade, indicating a 50 ns RAS access time, and uses a high-performance CMOS silicon-gate process that delivers low-power consumption suitable for extended battery-life applications. An EDO DRAM is a dynamic random-access memory variant that holds the output data valid longer than a standard Fast Page Mode DRAM by extending the column-address latch, enabling the next cycle to begin without waiting for a full precharge. EDO sits in the historical hierarchy between FPM DRAM and synchronous SDRAM, and was widely adopted in graphics frame buffers, set-top boxes, and PC peripherals before SDRAM displaced it in the late 1990s. EDO parts remain in use today in industrial, instrumentation, and legacy embedded designs where compatibility and long-term supply outweigh bandwidth. Key features include an industry-standard x16 pinout, timing, functions, and package that simplify second-sourcing; 12 row by 10 column addressing for the R6 revision; TTL-compatible inputs, outputs, and clocks; and CMOS-compatible standby current. The device supports read, write, read-write, and read-modify-write cycles, plus EDO page mode for high-bandwidth sequential access. Self-refresh and auto-refresh modes reduce system power by maintaining data without CPU intervention. Architecturally, the MT4LC4M16R6TG-5 integrates four internal memory banks that share the 16-bit data I/O, with multiplexed address inputs, /RAS, /CAS, /WE, and /OE control signals. Refresh is performed via /RAS-only refresh, /CAS-before-/RAS refresh, or hidden refresh, with a 64 ms refresh interval distributed across 4096 refresh cycles. The 50-pin TSOP-II package is optimized for surface-mount assembly on standard 0.8 mm pitch footprints. Typical applications include video frame buffers, laser-printer engines, networking line cards, industrial control panels, set-top box graphics memory, and legacy PC graphics adapters. The wide data bus and EDO page mode make the part especially effective for sequential block transfers such as pixel read/write in graphics subsystems and bit-mapped LCD controllers. The -5 speed grade suits mid-frequency microcontroller and embedded-MPU buses operating in the 25-40 MHz range. When designing with this device, ensure that the host controller generates proper EDO timing with /CAS held low through consecutive cycles and that the supply rail stays within 3.0V to 3.6V. Decouple VCC with a 0.1 µF ceramic capacitor placed within 5 mm of the VCC pin, and respect the 4096-cycle / 64 ms refresh requirement to preserve data integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the original Micron datasheet.

詢價 聯絡我們
MT53B128M32D1NP-062 - 4Gbit LPDDR4 SDRAM 1.6GHz | Micron
MT53B128M32D1NP-062

MT53B128M32D1NP-062 - 4Gbit LPDDR4 SDRAM 1.6GHz | Micron

The Micron Technology MT53B128M32D1NP-062 is a 4 Gbit Mobile LPDDR4 SDRAM organized as 128M x 32, operating at a 1.6 GHz clock frequency from a 1.1V supply, housed in a 200-ball WFBGA (10 x 14.5 mm) package. LPDDR4 (Low Power Double Data Rate 4) SDRAM is a member of the JEDEC-defined DDR SDRAM family optimized for mobile and power-sensitive embedded systems. Compared with DDR3L or DDR4, LPDDR4 achieves higher bandwidth per watt by lowering the core supply voltage to 1.1V and using a point-to-point channel architecture. In the memory hierarchy it sits under DRAM -> synchronous DRAM -> mobile SDRAM, and it is the dominant main-memory technology in smartphones, tablets, automotive infotainment, and edge AI platforms. Key features of this device include 4 Gbit density in a single 32-bit channel organization (128M x 32), 1.6 GHz operation (3200 MT/s data rate class), a low 1.1V core supply, and extended industrial or automotive temperature variants (the AUT:A grade is specified from -40C to +125C TC and qualified to AEC-Q100). The -062 speed grade defines the maximum clock frequency of the part. The WFBGA package uses a ball grid array for improved signal integrity and thermal performance relative to wire-bonded alternatives. Technically, the MT53B128M32D1NP family integrates Micron's LPDDR4 core with bank-group architecture, enabling fast random row access and efficient burst interleaving. Low-power features such as partial-array self-refresh, deep power-down, and per-bank refresh reduce standby current, which directly extends battery life in portable designs. The 32-bit single-die organization simplifies controller mapping for mid-density systems that do not require a full 64-bit dual-die configuration. Typical applications include automotive infotainment and instrument cluster memory, industrial human-machine interfaces, edge AI accelerators, networking line cards, and embedded vision systems where 4 Gbit of bandwidth-efficient DRAM is sufficient. When designing with this device, ensure your memory controller supports the JEDEC LPDDR4 protocol, and account for trace-length matching and termination on the high-speed data bus to meet signal-integrity requirements at 1.6 GHz operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-02.

詢價 聯絡我們
MT53D512M32D2NP-046 - 16Gbit LPDDR4 2133MHz DRAM | Micron
MT53D512M32D2NP-046

MT53D512M32D2NP-046 - 16Gbit LPDDR4 2133MHz DRAM | Micron

The Micron Technology MT53D512M32D2NP-046 is a 16Gbit Mobile LPDDR4 SDRAM memory IC organized as 512M x 32, operating at a 2.133 GHz data rate from a 1.1V core supply, housed in a 200-ball WFBGA package measuring 10 mm x 14.5 mm. LPDDR4 (Low Power Double Data Rate 4) is a JEDEC-defined class of DRAM optimized for mobile and power-sensitive embedded systems. Within the memory hierarchy, it sits below DDR4 server DIMMs in density per channel but far above them in power efficiency, using a low-voltage interface, deep power-down modes, and per-bank refresh to minimize energy per bit transferred. Key features include the high 16Gbit density in a single package, a 32-bit wide data bus that simplifies controller interfaces for application processors, and the -046 speed grade supporting 2133 MHz operation. Micron's D2NP NP (non-stack, single-die-planar) configuration offers a straightforward signal integrity profile compared with multi-die stacked alternatives. Architecturally, the device uses a standard LPDDR4 core with bank groups, burst length 8 and 16 access modes, and dynamic frequency scaling that lets the host processor reduce the clock in idle periods to cut quiescent power. The 1.1V VDD rail, combined with separate VDDQ I/O domain, allows fine-grained power management in battery-driven designs. Typical applications include mobile smartphone and tablet main memory, automotive infotainment and ADAS platforms (using the AIT/AUT automotive-grade variants), networking appliances, and industrial embedded computing where a compact footprint and low standby current matter. When designing with this device, pay careful attention to the 200-WFBGA fly-by routing topology, length-matched address/command lines, and reference voltage (VREFCA/VREFDQ) decoupling, as LPDDR4 timing budgets are tighter than DDR3L predecessors. On-die termination (ODT) settings should be validated across the full temperature range. This page synthesizes distributor pricing and availability, same-package drop-in alternatives including the MT53E LPDDR4X successor, and practical layout guidance not found in the manufacturer datasheet.

詢價 聯絡我們
MT53E1G32D2FW-046 AUT:C - 32Gb LPDDR4X SDRAM | Micron Automotive
MT53E1G32D2FW-046 AUT:C

MT53E1G32D2FW-046 AUT:C - 32Gb LPDDR4X SDRAM | Micron Automotive

The Micron MT53E1G32D2FW-046 AUT:C is a 32 Gbit Mobile LPDDR4X SDRAM memory IC organized as 1G x 32, delivering a parallel data interface at 2.133 GHz clock frequency (3.5 ns access time) in a 200-ball TFBGA (10x14.5 mm) surface-mount package. The device operates from 0.6V/1.1V supplies and is AEC-Q100 qualified for automotive applications, targeting the -40C to +125C automotive grade-2 temperature range. LPDDR4X SDRAM is a low-power double data rate synchronous DRAM standard defined by JEDEC, optimized for mobile, automotive, and embedded platforms. Within the memory hierarchy, LPDDR4X sits between LPDDR4 and LPDDR5: it lowers the I/O voltage from 1.1V to 0.6V versus LPDDR4 while maintaining the same internal VDD of 1.1V, reducing dynamic power by roughly 20% at equivalent throughput. Micron's Mobile LPDDR4X family is widely deployed in automotive infotainment, ADAS controllers, and telematics modules where high density, low power, and AEC-Q100 qualification converge. Key features include a 32 Gbit density in a single die, 32-bit data width per channel, a maximum clock of 2.133 GHz (data rate 4266 MT/s), on-die temperature sensor with auto self-refresh, ZQ calibration, write leveling, auto precharge, asynchronous reset, and data mask function. The 200-TFBGA package (10 x 14.5 mm) integrates the full 32 Gbit on a single chip, eliminating the need for multi-chip packaging at this density. Typical applications include automotive infotainment head units, advanced driver-assistance systems (ADAS) controllers, digital instrument clusters, in-vehicle networking gateways, and ruggedized telematics control units. The wide operating temperature range (automotive grade 2: -40C to +105C with peak support up to +125C) and AEC-Q100 qualification make this part suitable for under-hood and outdoor-mounted automotive modules. When designing with this LPDDR4X, ensure the host SoC supports LPDDR4X (not just LPDDR4), since the 0.6V VDDQ requirement is not backward compatible. Route the high-speed command/address and DQ lanes as impedance-controlled 80-ohm differential or 40-ohm single-ended traces, with length matching within 25 mils across the byte lane.

詢價 聯絡我們
MT53E1G32D2FW-046 WT:B - 32Gb LPDDR4 SDRAM | Micron
MT53E1G32D2FW-046 WT:B

MT53E1G32D2FW-046 WT:B - 32Gb LPDDR4 SDRAM | Micron

The Micron MT53E1G32D2FW-046 WT:B is a 32 Gbit Mobile LPDDR4 SDRAM organized as 1G x 32, supplied in a 200-ball TFBGA package measuring 10 mm x 14.5 mm, and clocked at 2.133 GHz (4266 MT/s data rate) with a 3.5 ns clock access time. It supports the LPDDR4 protocol (LPDDR4X-compatible VDDQ/VDD2 combination as published by Micron) and runs from a 1.1 V/1.8 V dual-rail supply, making it a standard-density option for memory-down mobile and embedded designs. What is LPDDR4? LPDDR4 (Low Power Double Data Rate 4) is a JEDEC-standard low-power volatile memory (LPDRAM) category that evolved from DDR SDRAM with the goals of higher bandwidth per watt and lower I/O voltage. It sits in the hierarchy LPDDR4 -> LPDDR -> Mobile DRAM -> Volatile Memory -> DRAM -> Semiconductor IC. Compared with LPDDR3, LPDDR4 introduces a 16-bit-per-channel architecture, lower VDDQ (1.1 V vs 1.2 V), deeper power-down states, and command/address on-package training, all of which raise both frequency headroom and energy efficiency for smartphones, tablets, and AI edge SoCs. The MT53E1G32D2FW-046 WT:B integrates the standard LPDDR4 feature set: auto precharge, data mask, ZQ calibration, write leveling, an on-die temperature sensor, and an asynchronous reset pin. The dual-die-package (DDP) construction delivers 32 Gb (4 GB) in the 200-ball TFBGA while staying within a thin mobile-style footprint, and the -046 speed bin maps to a 2133 MHz clock with 3.5 ns tCK - this matches the JEDEC 4266 MT/s peak data rate for x32, single-channel configurations. Typical applications are 4 GB main memory in smartphones and tablets, automotive infotainment and ADAS memory-down subsystems, AI edge / inference SoC working memory, and always-on companion tiles for wearable and IoT gateways. The wide operating temperature range and AEC-Q100-ready process node also make the device a strong fit for industrial HMI and ruggedized tablets. When designing with this device, follow Micron's reference PCB layout, place the 0.1 uF + 1 uF decoupling network within 1 mm of the balls, and provide a clean 1.1 V/1.8 V rail with low ripple. Use the on-die temperature sensor output to throttle the host SoC and to drive ZQ calibration timing. This page synthesizes distributor pricing, same-package Micron speed-bin and capacity variants, cross-brand pin-to-pin equivalents, and PCB-aware design guidance not bundled in the manufacturer datasheet.

USD $98.44 有庫存
MT53E2G32D4DE-046 - 64Gbit LPDDR4X SDRAM 2133MHz | Micron
MT53E2G32D4DE-046

MT53E2G32D4DE-046 - 64Gbit LPDDR4X SDRAM 2133MHz | Micron

The Micron Technology MT53E2G32D4DE-046 is a 64Gbit mobile LPDDR4X SDRAM organized as 2G x 32, operating at 2133 MHz (3.5 ns cycle) in a 200-ball TFBGA package measuring 10 x 14.5 mm. As an LPDDR4X device, it uses low-VDDQ I/O (1.06 V to 1.17 V supply) to cut interface power versus standard LPDDR4. LPDDR4X (Low Power Double Data Rate 4X) is a JEDEC-defined mobile DRAM interface optimized for battery-powered and bandwidth-hungry systems. In the memory hierarchy it sits as high-density, high-speed working memory: DRAM -> synchronous DRAM -> mobile LPDRAM -> LPDDR4X, providing the main volatile working storage between the application processor and nonvolatile flash storage. Key features include the 64Gbit density in a single die, x32 I/O width, 2133 Mbps data rate per pin, auto precharge, write leveling, ZQ calibration, a built-in temperature sensor, auto self-refresh, data mask (DM) function, and an asynchronous reset input. The temperature sensor enables autonomous self-refresh rate adjustment, protecting data retention while minimizing refresh power across the operating range. Technically, the device is a high-speed CMOS dynamic random-access memory with a 16n-bank architecture and quarter-density bank grouping, transferring on both clock edges at 2.133 GHz effective. The -046 speed bin defines the 3.5 ns clock cycle. Available temperature grades include WT (-25C to +85C), AIT (-40C to +95C, industrial), and AUT (-40C to +125C, automotive), all sharing the same die and 200-ball footprint. Typical applications include AI edge accelerators, NVIDIA Jetson-class modules, automotive infotainment and ADAS domains, 5G network equipment, and industrial HMI systems requiring 8GB-class DRAM with LPDDR4X power efficiency. Design consideration: LPDDR4X fly-by routing requires per-byte write leveling and careful length matching; verify VDD2/VDDQ rail sequencing per the manufacturer datasheet power-up procedure to avoid latch-up. This page synthesizes distributor pricing, temperature-grade alternatives, cross-reference guidance, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
MT53E2G32D4DE-046 WT:A - 64Gb LPDDR4X SDRAM 2G×32 | Micron
MT53E2G32D4DE-046 WT:A

MT53E2G32D4DE-046 WT:A - 64Gb LPDDR4X SDRAM 2G×32 | Micron

The Micron MT53E2G32D4DE-046 WT:A is a 64-Gbit Mobile LPDDR4X SDRAM organized as 2G × 32 bits, housed in a 200-ball TFBGA (10 × 14.5 mm) package and specified for the -046 speed grade (2133 MHz clock / 3.5 ns tCK). It operates from a 1.06 V to 1.17 V supply and targets mobile, automotive-cockpit, and ultra-compact embedded designs where low DRAM power and high bandwidth density are critical. The part carries an operating temperature range of -25 °C to +85 °C, suiting commercial and mildly harsh environments. LPDDR4X SDRAM is the low-power double-data-rate successor to LPDDR4, designed for smartphones, tablets, AI edge inference modules, and Always-On mobile platforms. The "X" suffix denotes a reduced I/O voltage (0.6 V VDDQ versus 1.1 V in plain LPDDR4), which lowers interface power by up to ~40% at the same data rate. LPDDR4X inherits LPDDR4's 16n prefetch architecture and PoD/HSUL signaling, and Micron's MT53E family extends this lineage with higher per-die density (up to 64 Gb) and additional low-power states such as Deep Power-Down and Per-Pin VRCG. Key features of the MT53E2G32D4DE-046 WT:A include a 2133 MHz data clock (4266 MT/s effective), dual-channel / dual-rank device organization, on-die temperature sensor, programmable refresh, and a parallel command/address interface compatible with standard LPDDR4X controllers. The 200-ball TFBGA footprint supports 1.0 mm ball pitch and integrates a single die-stack package (SDP) configuration, simplifying PCB layout versus multi-die variants. Architecturally, this device uses Micron's 1y/1z-class DRAM process with internal bank-grouping of 8 banks per channel. Dual-rank operation enables higher capacity without increasing the package ball count, while the 0.6 V HSUL_12 interface reduces I/O power dramatically compared with LPDDR4. The result is a memory well suited to sustained data rates (4266 MT/s peak) while maintaining sub-1 W active power for 64-bit channel bandwidth. Typical applications include smartphone application processors, tablet main memory, AI accelerator edge inference cards (e.g. wearables, smart cameras), and automotive infotainment ECUs requiring -40 °C to +85 °C tolerances. It also fits portable gaming devices, AR/VR head-mounted display buffers, and IoT gateways with on-device AI. When designing in this part, verify controller compatibility with the 0.6 V VDDQ rail and ensure PCB trace matching for the 4266 MT/s data rate. Decoupling must be sized for LPDDR4X burst current (consult Micron TN-46 series for reference). The 200-ball TFBGA requires assembly under JEDEC J-STD-020 MSL-3 profile. This page synthesizes distributor pricing, drop-in alternatives within the MT53E family, and practical PCB / thermal guidance drawn from Micron datasheets and TN-series technical notes - information not bundled on any single distributor page.

詢價 聯絡我們
MT53E768M64D4HJ-046 - 48Gbit LPDDR4X SDRAM | Micron
MT53E768M64D4HJ-046

MT53E768M64D4HJ-046 - 48Gbit LPDDR4X SDRAM | Micron

The Micron Technology MT53E768M64D4HJ-046 is a 48Gbit Mobile LPDDR4X SDRAM memory IC organized as 768M x 64, operating at 2133 MHz (2133 Mbps/pin data rate, 3.5 ns access time) with an LVSTL I/O interface, housed in a 556-ball WFBGA (12.4 mm x 12.4 mm) package. LPDDR4X (Low Power Double Data Rate 4X) is a JEDEC-defined high-bandwidth, low-voltage mobile DRAM standard used as the main-system memory in smartphones, tablets, automotive infotainment, and edge-AI compute platforms. LPDDR4X sits within the mobile DRAM hierarchy alongside LPDDR4 and below LPDDR5, and is distinguished from LPDDR4 by a lower VDDQ I/O supply that significantly reduces interface power at the same data rate. Key features of this device include its 48Gbit (6 GB) density in a single package, a wide 64-bit data bus, 2133 MHz clock rate with 3.5 ns access latency, and the ultra-compact 556-ball fine-pitch BGA (FBGA/WFBGA) footprint suited to space-constrained PCBs. Micron offers this die in multiple temperature and status suffixes (AAT, AUT, AIT, WT) covering commercial and automotive-grade operating conditions. The MT53E LPDDR4X family uses a CMOS dynamic memory core with bank-group architecture supporting burst accesses over a parallel interface, and quad-die package (QDP) variants are referenced by distributors (FBGA QDP coding on the B-suffix speed bins). Signals use LVSTL (Low Voltage Swing Terminated Logic) terminated I/O for signal integrity at 2133 Mbps/pin. Typical applications include automotive digital cockpits and ADAS platforms, high-resolution mobile displays and handsets, networking and edge-AI compute modules, and embedded systems requiring multi-gigabyte memory bandwidth in a small footprint. Design consideration: LPDDR4X routing demands strict length matching of the 64-bit data bus, on-die-termination configuration during controller initialization, and a regulated VDD2/VDDCA power rail with fast transient response; consult the Micron datasheet and controller compatibility list before layout. This page synthesizes distributor listings, temperature-suffix variants, and drop-in same-die alternatives not consolidated in the manufacturer part catalog.

詢價 聯絡我們
MT58L64L32FT-10 - 2Mb Sync Burst SRAM 10ns 66MHz | Micron
MT58L64L32FT-10

MT58L64L32FT-10 - 2Mb Sync Burst SRAM 10ns 66MHz | Micron

The Micron Technology MT58L64L32FT-10 is a 2-Mbit flow-through synchronous burst SRAM organized as 64K x 32/36 (also configurable as 128K x 18), delivering a fast 10 ns clock/access time at clock rates up to 66 MHz in a 100-lead TQFP (14 x 20.1 mm) package. A synchronous burst SRAM is a static random-access memory that synchronizes address, data, and control inputs to an external clock and generates burst addresses internally, making it a key member of the memory IC family that sits within the broader semiconductor hierarchy (SRAM -> static RAM -> volatile memory -> memory IC -> integrated circuit). Unlike asynchronous SRAMs, burst-mode devices such as the MT58L64L32FT-10 prefetch sequential addresses, reducing effective access time for cache-like workloads and pipelined bus masters. Key features include single +3.3 V power supply (VDD, +0.3 V/-0.165 V tolerance), a separate isolated +2.5 V or 3.3 V output buffer supply (VDDQ) for I/O voltage flexibility, fast clock-to-output and OE# access times, individual BYTE WRITE enable controls, and SNOOZE MODE for reduced-power standby. Common data input/output pins simplify bus routing on 32-bit and 36-bit (byte-parity) systems. Architecturally, the flow-through (non-pipelined) SyncBurst design presents data on the same cycle the address is captured, eliminating pipeline latency and simplifying timing closure for controllers that expect zero-wait-state reads and writes. Registered outputs driven by the internal burst address counter support linear, interleaved, and alternate burst sequences per industry-standard processor burst orders. Typical applications include network router and switch line-card buffering, FPGA and DSP external memory expansion, telecom equipment control-plane memory, industrial controllers, and test instrumentation where deterministic 10 ns access and 66 MHz burst throughput are required. Design considerations: tie VDDQ to the host bus I/O voltage (2.5 V or 3.3 V), use SNOOZE MODE (asserting ZZ) to cut standby power during idle periods, and verify burst-order configuration straps against the host processor (linear vs. interleaved) before layout freeze. This page synthesizes distributor availability data, same-family drop-in speed/temperature variants, and practical design guidance not consolidated in the manufacturer datasheet.

詢價 聯絡我們
MT60B2G8HB-48B:A - 2.4 GHz DDR5 16Gb 2Gx8 SDRAM | Micron
MT60B2G8HB-48B:A

MT60B2G8HB-48B:A - 2.4 GHz DDR5 16Gb 2Gx8 SDRAM | Micron

The Micron MT60B2G8HB-48B:A is a 16 Gbit DDR5 SDRAM organized as 2G x 8 (256M x 8 logical bank groups), housed in an 82-ball VFBGA (9x11) package with POD (Pseudo Open Drain) 1.1 V signaling. It operates at a 2400 MHz data clock (4800 MT/s effective), supports on-die ECC, and is qualified for the 0 to 95 °C commercial temperature range. DDR5 SDRAM represents the fifth generation of Double Data Rate synchronous DRAM and follows the JEDEC JESD79-5 standard. Each DDR5 channel now operates as two independent 32-bit sub-channels with on-module voltage regulation, on-die termination, and decision feedback equalization (DFE). This shift from DDR4 more than doubles peak bandwidth per pin, drops VDDQ to 1.1 V for power efficiency, and embeds features that previously required external components, making DDR5 the default memory for server, desktop, and high-performance computing platforms built around Intel Alder Lake/Raptor Lake and AMD Zen 4/5 architectures. Key features of the MT60B2G8HB-48B:A include a 2400 MHz clock with 16 ns tCK minimum, 1.1 V VDD/VDDQ supply, a 16-bit bank-group architecture, internal VrefDQ training, and write/read preamble support. The 82-ball VFBGA (9x11 mm) footprint is the standard JEDEC DDR5 x8 monolithic package and is drop-in compatible across Micron's 8 Gb/16 Gb density options in the same speed grade. Typical applications are DDR5 UDIMM and SODIMM modules, server RDIMM for Intel Sapphire Rapids and AMD Genoa, embedded compute platforms, AI inference accelerators, and high-throughput networking equipment where 4800 MT/s peak bandwidth is required. Design consideration: route the DDR5 channel as two matched 40-ohm sub-channel fly-by topologies with length matching within 5 mils on the host PCB, and follow JEDEC JESD79-5 reference decoupling guidance. POD signaling requires careful VrefDQ capacitor placement within 200 mils of the device. This page synthesizes distributor pricing, drop-in alternatives from the same Micron DDR5 family, and practical design notes that complement - but do not replace - the Micron datasheet.

詢價 聯絡我們
MT60B2G8RZ-64B-IT-H - 16Gb DDR5 SDRAM 3.2 GHz 78-FBGA | Micron
MT60B2G8RZ-64B-IT-H

MT60B2G8RZ-64B-IT-H - 16Gb DDR5 SDRAM 3.2 GHz 78-FBGA | Micron

The Micron MT60B2G8RZ-64B-IT-H is a 16 Gbit DDR5 SDRAM memory IC organized as 2G × 8, operating at up to 3.2 GHz data rate in a 78-ball Fine-pitch Ball Grid Array (FBGA) measuring 7.5 mm × 11 mm, in industrial temperature grade (IT). It is a JEDEC-compliant DDR5 SDRAM component designed for high-bandwidth, low-voltage memory subsystems in mainstream server, client, and embedded platforms. What is a DDR5 SDRAM? DDR5 (Double Data Rate 5) Synchronous DRAM is the fifth generation of DDR memory, succeeding DDR4. Compared with DDR4, DDR5 doubles the peak data rate (starting at 3200 MT/s with on-die termination and decision feedback equalization), halves the channel voltage (1.1 V VDD, 1.1 V VDDQ), introduces on-die ECC, and doubles bank group counts to improve parallelism. In the broader taxonomy: DRAM -> volatile memory -> semiconductor memory -> integrated circuit. The MT60B2G8RZ-64B-IT-H therefore sits in the volatile main-memory tier of any computing platform. Key features include a maximum operating supply current of 363 mA, an industrial operating temperature range of 0 °C to +95 °C, a 1.1 V nominal supply (VDD/VDDQ), on-die termination (ODT), and a 78-ball FBGA package that supports high-speed signaling at 3200 MT/s. The 7.5 mm × 11 mm outline is shared across Micron's 16 Gb DDR5 ×8 family, enabling drop-in compatibility across density, speed, and temperature grades. The device uses a fly-by topology for command, address, control, and clock signals, and integrates an on-DIMM voltage regulator (PMIC interface) for client DIMM-style deployments. Decision Feedback Equalization (DFE) and Write Leveling maintain signal integrity at 3200 MT/s, while the 16n prefetch and bank-group architecture double the effective page size compared to DDR4. Typical applications include DDR5 UDIMM and SODIMM modules for desktop and notebook platforms, embedded computing platforms requiring industrial-grade memory, single-board computers (SBC) and edge AI accelerators, networking line cards with high packet buffer demand, and entry-level server memory modules. The IT grade makes it suitable for harsher thermal envelopes than commercial-grade DRAM. When designing with this part, follow JEDEC JESD79-5 PCB layout and routing rules for DDR5: keep the byte-group DQ/DQS lengths matched within 5 mil, maintain a 100 Ω differential impedance on DQ/DQS pairs, and use a reference termination scheme compliant with the host memory controller's RTT selections. The DRAM does not require an external PMIC on the component itself but expects a 1.1 V rail in system designs. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, all verified as of 2026-10-05.

詢價 聯絡我們