產品(44,000+)

SY89531LHC - 500MHz LVPECL Clock Synthesizer | Microchip
SY89531LHC

SY89531LHC - 500MHz LVPECL Clock Synthesizer | Microchip

The Microchip Technology SY89531LHC is a precision programmable clock synthesizer and clock driver operating from a 3.3V ±10% power supply, with an output frequency range of 33MHz to 500MHz. The device is packaged in a 64-pin TQFP with an exposed pad and provides LVPECL and HSTL outputs, TTL/CMOS-compatible control logic, cycle-to-cycle jitter below 50ps, and pin-to-pin skew below 50ps. It also interfaces directly with a 14MHz to 18MHz crystal. A clock synthesizer and driver is an integrated timing component that generates or distributes one or more related clock signals to digital systems. Clock synthesizers generally use a phase-locked loop to establish a stable relationship between a reference oscillator and the generated outputs. Clock drivers translate those signals into the electrical logic levels required by the destination circuitry. The SY89531LHC combines synthesis, fanout buffering, clock driving, and level translation in one 64-pin device. Key features include an integrated synthesizer with fanout buffers, clock drivers, and translators. Its maximum listed output frequency is 500MHz, while the low-jitter specification of less than 50ps cycle-to-cycle supports demanding timing chains. Pin-to-pin skew below 50ps helps maintain relative timing between outputs, and the direct crystal interface simplifies reference-clock implementation without requiring an external oscillator. The LVPECL and HSTL output options make the device suitable for systems that require high-speed clock distribution with selectable interface levels. TTL/CMOS-compatible control logic supports configuration and operating control from conventional digital logic. The 3.3V ±10% supply range supports integration into systems designed around a nominal 3.3V clocking rail, although power sequencing, decoupling, and trace-impedance design remain important at 500MHz. Typical applications include server and enterprise networking equipment, multi-processor computing platforms, telecommunications equipment, storage systems, and other high-speed digital systems requiring multiple synchronized clock domains. The combination of programmable synthesis, integrated fanout, low skew, and output translation reduces the number of discrete timing components required in a multi-clock board. For a robust layout, place the crystal and decoupling capacitors close to their associated pins, provide a continuous ground reference beneath the exposed pad, and use controlled-impedance routing for every high-speed clock output. Keep the crystal loop compact and isolate it from LVPECL and HSTL outputs to reduce coupling. Confirm output termination values against the receiver technology and the voltage-referenced logic levels before releasing the PCB. This page combines the device's published operating ranges and packaging information with application-oriented guidance for jitter control, clock distribution, pin assignment, PCB layout, and drop-in replacement assessment. The 64-pin exposed-pad package and integrated multi-output architecture distinguish the SY89531LHC from single-output oscillator-only or simple buffer-only timing devices.

詢價 聯絡我們
SY89531LHZ - 3.3V Programmable Clock Synthesizer | Microchip
SY89531LHZ

SY89531LHZ - 3.3V Programmable Clock Synthesizer | Microchip

The Microchip Technology SY89531LHZ is a 3.3V programmable clock synthesizer and jitter-cleaning clock generator with a 14MHz to 18MHz crystal input interface and a 33MHz to 500MHz output-frequency range. The device combines an integrated synthesizer, fanout buffers, clock drivers, and clock translators in one 64-pin TQFP package with an exposed pad. Its HSTL and LVPECL outputs support high-speed digital systems requiring multiple synchronized clock domains. A clock synthesizer is a clock-and-timing integrated circuit that derives one or more precise output frequencies from a stable reference source. Clock generators and phase-locked loops belong to the broader timing-control hierarchy, which includes clock buffers, jitter cleaners, frequency dividers, and clock distribution devices. These components are used to create, multiply, divide, buffer, and translate clock signals in communication equipment, servers, industrial controllers, test equipment, and high-speed computing platforms. The SY89531LHZ provides a 3.3V ±10% power supply, cycle-to-cycle jitter below 50ps, and pin-to-pin skew below 50ps. Its output range extends from 33MHz to 500MHz, while the direct crystal interface accepts references from 14MHz to 18MHz. TTL/CMOS-compatible control logic allows programming and operating-state control through a conventional digital interface. The combination of synthesis, fanout, drive, translation, and jitter-cleaning functions reduces the number of separate timing components required in a multi-clock design. The integrated architecture is intended to produce related clocks from a common source while maintaining tight timing relationships between outputs. HSTL and LVPECL translation permits the clock network to interface with logic using incompatible voltage and signal conventions. Because these are high-speed differential or translated clock outputs, trace geometry, return paths, output termination, decoupling, and connector or package transitions require careful implementation to prevent added skew, reflections, and edge degradation. Typical uses include telecommunications line cards, network switches, serial links, server clock trees, instrumentation, and industrial test systems. The device is also suitable for FPGA or ASIC clocking where several related frequencies must be generated from one crystal reference. The 500MHz capability supports demanding digital logic, while the sub-50ps timing characteristics help preserve margin in demanding source-synchronous or parallel interfaces. Designers should use the manufacturer pin-description table when assigning package connections and should preserve the recommended crystal, decoupling, and output-termination networks. The exposed thermal pad requires an appropriate PCB thermal strategy, particularly when adjacent high-speed circuitry increases ambient temperature or board-level power density. Because this is an obsolete catalog device, new production designs should confirm availability and lifecycle status before committing to a volume build. This product summary consolidates the device's principal timing parameters, package information, cross-reference candidates, and engineering considerations into a design-oriented reference. It also distinguishes the tray-packaged SY89531LHZ from the separate -TR tape-and-reel ordering code and helps engineers verify footprint, output type, frequency range, and replacement requirements before schematic capture or PCB release.

詢價 聯絡我們
SY89532LHC - 3.3V 500MHz Bus Clock Synthesizer | Microchip
SY89532LHC

SY89532LHC - 3.3V 500MHz Bus Clock Synthesizer | Microchip

The Microchip SY89532LHC is a 3.3 V precision bus-clock synthesizer that generates programmable output frequencies from 33 MHz to 500 MHz and supports LVPECL and LVDS clock outputs. It combines a synthesizer with clock fanout functions in a 64-EP-TQFP surface-mount package. The device uses a crystal input and operates across the 0°C to 85°C commercial temperature range. A programmable frequency synthesizer is a clock-and-timing integrated circuit that derives one or more deterministic output clocks from a stable reference source. Within the timing hierarchy, the SY89532LHC belongs to the clock generator and PLL family, which provides stable, phase-controlled timing for digital systems. Its LVPECL and LVDS interfaces are commonly used when a PCB requires high-speed differential clock distribution with low signal degradation. The primary operating characteristics are a 3.3 V supply, a 33 MHz to 500 MHz programmable output range, LVPECL and LVDS output support, and a single clock/frequency-synthesis circuit. These attributes make the part suitable for communication equipment, network interfaces, server and storage systems, and industrial control electronics. The wide frequency span also allows one clock architecture to cover several system operating modes. The SY89532LHC uses the Precision Edge approach to provide low-jitter differential clock generation and distribution. LVPECL is suited to shorter board-level links and common high-speed digital interfaces, while LVDS provides a low-voltage differential output for compatible receivers. Differential outputs reduce sensitivity to common-mode noise when routing through controlled-impedance PCB traces. The integrated synthesizer and fanout structure can simplify clock-tree design by reducing the number of separate oscillator and buffer devices. Typical applications include processor reference clocks, network-interface timing, serial-link clock distribution, telecommunications equipment, industrial instrumentation, and data-conversion systems. A designer should select the output mode according to receiver requirements and confirm that the generated frequency, reference crystal, termination network, and decoupling satisfy the system timing budget. Layout is critical because high-speed differential clock signals require short, symmetrical routes and proper termination. Place the reference and decoupling components close to their associated pins, use a continuous reference plane, and avoid routing outputs through noisy switching areas. Verify output amplitude, frequency accuracy, jitter, and rise/fall-time compliance with the target receiver during system validation. This product page consolidates the verified operating range, package information, lifecycle status, sourcing information, replacement guidance, and application-focused engineering notes. It also distinguishes documented capabilities from parameters that require confirmation in the manufacturer datasheet, helping engineers plan a clock-tree design before committing the SY89532LHC to a PCB.

詢價 聯絡我們
SY89532LHH - 500MHz Clock Synthesizer | Microchip
SY89532LHH

SY89532LHH - 500MHz Clock Synthesizer | Microchip

The Microchip Technology SY89532LHH is a 3.3 V precision programmable bus clock synthesizer covering 33 MHz to 500 MHz and supporting LVPECL and LVDS clock outputs in a 64-pin package. It combines a synthesizer, fanout buffers, clock drivers, and a translator in one device, with specified jitter below 50 ps. A programmable clock synthesizer is a clock-and-timing IC that generates or distributes a controlled reference frequency for systems requiring deterministic timing. It belongs to the clock generator and PLL family within the broader clock and timing IC hierarchy. The SY89532LHH is intended for systems that need both synthesis and multi-output distribution while supporting two common high-speed differential clock-logic standards. The device operates from a 3.3 V power supply with a tolerance of ±10%. Its programmable operating range extends from 33 MHz to 500 MHz, allowing the same circuit to serve multiple clocking requirements. LVPECL and LVDS outputs provide flexible termination and interface choices for high-speed backplanes, communications equipment, clock-distribution boards, and test systems. The integrated synthesizer, fanout buffers, clock drivers, and translator reduce the number of separate timing components required. A key performance specification is jitter below 50 ps, which supports precise edge placement in demanding digital systems. Combined with the broad 33 MHz to 500 MHz operating range, this jitter performance makes the SY89532LHH useful where clock distribution and signal integrity are both important. The 64-pin package provides connections for configuration, reference input, clock outputs, power, and ground according to the manufacturer's device documentation. Typical applications include high-speed serial-interface clock distribution, communications backplanes, network and switching equipment, FPGA or ASIC clock trees, and instrumentation requiring several LVPECL or LVDS clock sources. In these systems, the device can establish a common low-jitter timing reference and distribute it to multiple destinations without requiring separate output-driver ICs. When designing around the SY89532LHH, preserve the high-speed return path by using a controlled-impedance multilayer PCB and place decoupling capacitors close to the supply pins. Differential routing should maintain consistent pair geometry and termination, while unused outputs should be handled according to the manufacturer's recommended output configuration. Confirm the programmed frequency, output type, and termination scheme before releasing the PCB. This product record combines the device's operating limits, supported clock standards, package information, sourcing structure, and application guidance with practical comparison and design notes. It helps engineers evaluate the SY89532LHH for precision clock-tree designs while clearly separating confirmed specifications from information requiring additional engineering confirmation.

詢價 聯絡我們
SY89533LHC - 500MHz LVPECL/LVDS Clock Synthesizer | Microchip
SY89533LHC

SY89533LHC - 500MHz LVPECL/LVDS Clock Synthesizer | Microchip

The Microchip SY89533LHC is a 3.3 V precision programmable bus clock synthesizer covering an output-frequency range of 33 MHz to 500 MHz. It integrates a frequency synthesizer with clock fanout buffers and supports LVPECL and LVDS clock outputs. The device is packaged in a 64-pin TQFP package, providing a high-density option for communications, networking, and test systems that require multiple low-jitter clock outputs. A programmable clock synthesizer belongs to the clock and timing IC hierarchy, where it combines frequency generation, distribution, and logic-level translation in one device. Unlike a crystal oscillator that produces a fixed frequency, the SY89533LHC allows a system clock to be selected through programming. Its LVPECL and LVDS outputs support high-speed differential clocking environments where edge quality, skew control, and deterministic fanout are important. The principal operating characteristics are the 3.3 V supply, programmable 33 MHz-to-500 MHz frequency capability, and support for both LVPECL and LVDS differential outputs. Integrating the synthesizer and fanout buffers in one package reduces the number of discrete timing components required for multi-output clock trees. The integrated approach also minimizes additive jitter and part-to-part skew compared with a discrete implementation, improving system-level timing consistency while reducing board space and power-management complexity. SY89533LHC belongs to the Micrel SY89532L and SY89533L precision-edge bus clock family. The related SY89532L device covers the same 33 MHz-to-500 MHz class of programmable operation but has a different output configuration. Device selection therefore requires review of the number and type of outputs, supported logic levels, programming interface, and application-specific timing requirements before substitution. Typical uses include processor and interface clock trees, high-speed serial links, optical-network equipment, communications infrastructure, instrumentation, and FPGA or ASIC clock distribution. In these systems, the device can generate a common programmable clock and distribute it to multiple differential receivers while maintaining one controlled frequency plan. The primary design consideration is maintaining a clean, low-noise supply and a controlled impedance environment for every differential output. Keep input and output return paths short, provide solid ground-plane continuity, and follow the manufacturer's recommended termination and decoupling arrangements. Confirm output amplitude, common-mode voltage, fanout limits, and pin-level programming requirements against the applicable device documentation before layout release. This product summary connects the SY89533LHC's programmable frequency range and differential-output capabilities with package, application, and substitution guidance. It also provides practical implementation notes for engineers designing precision clock trees, while clearly separating documented characteristics from parameters that require confirmation from the manufacturer datasheet.

詢價 聯絡我們
SY89534LHC - 500MHz LVPECL/LVDS Clock Synthesizer | Microchip
SY89534LHC

SY89534LHC - 500MHz LVPECL/LVDS Clock Synthesizer | Microchip

The Microchip Technology SY89534LHC is a 3.3 V precision programmable clock synthesizer with an operating frequency range of 33 MHz to 500 MHz, LVPECL and LVDS clock outputs, and PLL bypass support. The device is supplied in a 64-lead TQFP package with an exposed pad and is intended for surface-mount clock-generation and fanout designs. A clock synthesizer is a timing IC that accepts a reference clock and generates one or more output clocks at controlled frequencies. Clock synthesizers combine a phase-locked loop, programmable frequency synthesis, and output fanout functions within the broader clock-and-timing IC hierarchy. They are used where multiple circuits require a stable, phase-related reference signal and where programmable frequency control is more useful than a fixed-frequency oscillator. The SY89534LHC supports input formats including CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL. Its output section includes LVPECL capability, while the product description identifies programmable LVPECL and LVDS bus-clock synthesis. A 3.0 V to 3.6 V supply range permits use in conventional 3.3 V clocking systems, and the integrated PLL with bypass allows designers to evaluate both synthesized and bypass clock paths. The principal performance range extends to 500 MHz, making the device applicable to high-speed digital buses, serializer interfaces, data-conversion systems, and network or storage equipment. Its programmable synthesis architecture lets one device support multiple clock requirements, while the output stage provides the voltage-compatible interface needed for systems using differential clocking. Exact jitter, phase-noise, and output-skew figures are not stated in the supplied product information. Typical uses include central clock distribution in communications equipment, reference-clock generation for high-speed mixed-signal systems, clocking for data converters, and local oscillator support in industrial or networking products. The 64-lead exposed-pad package provides numerous connections for clock inputs, configuration, control, and output stages. The exposed pad also provides a practical thermal path when copper area and vias are incorporated into the PCB layout. For implementation, preserve the clock input and output return paths, use controlled-impedance routing for high-speed differential signals, and connect the exposed pad to the appropriate ground plane with adequate thermal vias. Decoupling should be placed close to the supply pins. Because the exact pin assignments, output configurations, loop filter recommendations, and timing limits are not included here, use the manufacturer pin-description and application tables before finalizing the schematic or PCB.

詢價 聯絡我們
SY89535LHC - 500MHz Clock Synthesizer | Microchip
SY89535LHC

SY89535LHC - 500MHz Clock Synthesizer | Microchip

The Microchip SY89535LHC is a 3.3 V precision programmable bus-clock synthesizer with an output-frequency range of 33 MHz to 500 MHz, differential LVDS and LVPECL outputs, and a 64-pin TQFP package. The integrated PLL includes bypass capability, allowing the device to support systems that need synthesized or bypassed clocking modes. A programmable clock synthesizer is a clock-and-timing IC that generates one or more deterministic output frequencies from a reference input. Clock synthesizer belongs to the broader PLL and frequency-generator hierarchy, where the PLL locks a reference-derived output to a stable frequency. LVPECL and LVDS are differential high-speed signaling families used to distribute low-jitter timing signals across demanding digital systems. The SY89535LHC accepts CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL input formats. Its differential LVDS and LVPECL outputs support communication equipment, network infrastructure, processor clocking, and high-speed test systems. The integrated synthesizer and fanout-buffer arrangement reduces the number of separate clock-generation and distribution stages required in a multi-output design. Operating from a 3.3 V supply, the device operates from 33 MHz to 500 MHz according to the product description. The output architecture supports LVPECL operation over the higher-frequency range, while the clock-generation section can work with single-ended or differential reference arrangements. A 160 MHz input or differential reference is identified for the programmable output architecture, while the exact divider, multiplication, and jitter limits must be confirmed from the manufacturer pin and electrical tables before final timing-budget approval. Typical installations include telecommunications line cards, serial-interface equipment, data-conversion systems, network switches, instrumentation, and test-and-measurement platforms. The multiple logic standards make the device useful in mixed-interface clock trees where a common reference must fan out to several clock domains without requiring separate source devices. PCB implementation must account for high-speed differential routing, controlled impedance, short return paths, and adequate decoupling of the 3.3 V supply. Differential pairs should remain continuously referenced to a solid ground plane, and unused outputs should be terminated according to the manufacturer's output-enable and unused-pin guidance. Differential clock routing also requires length matching sufficient for the selected LVDS or LVPECL data rate. This page combines the device's clock-range, logic-standard, package, and lifecycle characteristics with practical PCB guidance, sourcing instructions, and a structured comparison framework. It is intended to help engineers determine whether the obsolete SY89535LHC remains suitable for a new design, a repair, or a controlled legacy-system continuation.

詢價 聯絡我們
SY89536LHC - 500MHz Clock Synthesizer | Microchip
SY89536LHC

SY89536LHC - 500MHz Clock Synthesizer | Microchip

The Microchip Technology SY89536LHC is a 3.3 V precision bus-clock synthesizer covering 33 MHz to 500 MHz, with programmable LVPECL and HSTL outputs integrated into a 64-pin TQFP package. It accepts single-ended LVTTL and CMOS, SSTL, differential LVPECL, LVDS, HSTL, and CML reference inputs. The integrated synthesizer, fanout buffers, clock dividers, and logic translator consolidate multiple clock functions into one device while helping reduce additive jitter, part-to-part skew, board area, and power consumption. A programmable PLL clock synthesizer is a clock-and-timing IC that multiplies or divides a reference frequency and distributes the resulting clock to multiple circuit domains. The SY89536LHC belongs to Microchip's Precision Edge family and combines frequency synthesis with differential and single-ended clock translation. This integration allows a common reference to support several incompatible clock-interface standards without requiring a separate translator for each destination. The device supports a 3.3 V supply and an operating output-frequency range of 33 MHz to 500 MHz. Its LVPECL and HSTL outputs suit high-speed backplanes, processor interfaces, communications equipment, and test systems. The flexible reference-input architecture permits use with multiple logic families, while the integrated fanout section reduces the number of discrete clock components needed around the PLL. Divider and translator functions add further design flexibility in multi-rate systems. Technically, the principal benefit is system timing consolidation. Combining PLL synthesis, fanout, division, and translation in one package can shorten routing paths and reduce clock-tree complexity. The flexible input stage supports both single-ended and differential sources, allowing a system designer to select the reference format that best matches the upstream timing device. Exact PLL multiplication ratios, divider values, jitter, skew, output count, and electrical limits should be taken from the manufacturer datasheet for the selected operating configuration. Typical uses include networking and communications backplanes, processor clock generation, data-converter instrumentation, industrial control electronics, and high-speed test equipment. The LVPECL outputs are appropriate for point-to-point links carrying high-frequency clock signals, while HSTL outputs support compatible single-ended clock networks. Differential clock routing and controlled termination remain important when signal integrity is critical. Design the SY89536LHC reference and clock-output network according to the manufacturer's recommended termination and decoupling arrangements. Keep high-speed clock traces short, controlled-impedance, and away from noisy switching nodes. Confirm output frequency, reference ratio, jitter, supply tolerance, and unused-pin treatment for the exact configuration before releasing a PCB layout. This product overview combines the device function, operating limits, interface options, application guidance, package information, and qualification constraints for engineering selection. It also distinguishes documented capabilities from parameters that require schematic-level review in the manufacturer datasheet.

詢價 聯絡我們
SY89537LMG - 3.3V LVPECL/LVDS Clock Synthesizer | Microchip
SY89537LMG

SY89537LMG - 3.3V LVPECL/LVDS Clock Synthesizer | Microchip

The Microchip Technology SY89537LMG is a 3.3 V programmable multiple-output bank clock synthesizer and fanout buffer with LVPECL and LVDS outputs, housed in a 44-VFQFN exposed-pad package rated to 756 MHz. It belongs to the Precision Edge clock-generation family for enterprise switch, router, and multiprocessor server systems. A programmable clock synthesizer is an integrated timing device that uses a phase-locked loop to derive one or more precisely related output frequencies from a common reference clock. Clock generators and PLLs sit inside the broader clock-and-timing IC category, where they support system timing, interface clocking, serialization, and multi-domain clock distribution. The SY89537L family combines frequency synthesis with fanout so a single reference can feed several circuits with matched or related clocks. Principal features include programmable output generation, LVPECL and LVDS differential clock support, multiple output banks, and integrated fanout capability. The 3.3 V supply and high-speed differential outputs suit processor, networking, and storage systems that require deterministic clock distribution across long PCB traces. A 756 MHz family capability and a 44-VFQFN exposed-pad package allow compact implementation in space-constrained communication equipment. The device is intended for precision PLL-based clock generation rather than general-purpose waveform synthesis. Its differential outputs reduce sensitivity to common-mode noise compared with single-ended clock distribution, while the fanout section helps prevent one source from driving multiple loads directly. Configuration data and register programming determine the output frequencies and operating behavior. Typical uses include enterprise network switches, layer-3 routers, multiprocessor servers, line cards, and other equipment that distributes high-speed clocks to multiple processors, transceivers, serializers, or memory subsystems. The SY89537L family is specifically optimized for generating internal system clocks in these platforms. PCB design should preserve the differential impedance of each LVPECL or LVDS pair and provide the exposed pad with a low-impedance thermal and return-path connection. Follow the manufacturer’s pin-description table and reference layout when assigning inputs, configuration pins, supply rails, and output pairs. This page combines the manufacturer’s family description, package information, clock-output capabilities, and application positioning with practical replacement guidance and design notes that help engineers evaluate the SY89537LMG for existing PCB revisions.

詢價 聯絡我們
SY89537LMH - 756 MHz Clock Synthesizer | Microchip Technology
SY89537LMH

SY89537LMH - 756 MHz Clock Synthesizer | Microchip Technology

The Microchip Technology SY89537LMH is a clock and frequency synthesizer IC with a 756 MHz output, a PLL, differential input and output capability, and a 44-pin VFQFN exposed-pad package. It supports CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL inputs and generates LVDS or LVPECL outputs. The device is listed as obsolete and belongs to the Precision Edge clock-generation family. A clock synthesizer is a clock and timing IC that generates or distributes one or more related clock signals for digital systems. A PLL-based synthesizer can derive an output clock from an input reference, while a fanout buffer distributes clock signals across multiple loads. Within the broader hierarchy, the SY89537LMH is a programmable PLL clock synthesizer and frequency-generation device within the clock and timing IC category. Key characteristics include a maximum listed output frequency of 756 MHz, one PLL, a 3:7 input-to-output ratio, and support for both differential and single-ended input arrangements. Differential output operation supports LVDS and LVPECL formats. These features make the device relevant to processor, networking, storage, and high-speed digital systems that require low-jitter clock generation and flexible logic-level interoperability. The 44-MLF package is a 7 mm by 7 mm surface-mount VFQFN configuration with an exposed thermal pad. The exposed pad provides a direct thermal path from the device to the PCB, which is important when the internal circuitry operates continuously at high clock rates. Board construction should provide a continuous ground plane beneath the pad and adequate thermal-via density to spread heat without disturbing clock-routing geometry. Typical clock-system uses include central timing for enterprise switches and routers, server and multiprocessor clock distribution, storage-controller clocking, and backplane synchronization. Differential LVDS or LVPECL outputs are especially useful where long traces, multiple loads, or noisy neighboring circuitry require robust clock transmission. The oscillator-free architecture makes the device a programmable alternative to a fixed-frequency crystal oscillator when the system needs controlled synthesis or distribution. A primary design consideration is the interaction between differential input timing, output logic standards, and PCB routing. Use the pin-description table in the manufacturer datasheet when assigning tracks and the recommended termination network when configuring LVDS or LVPECL interfaces. Maintain symmetric routing for differential pairs and keep clock traces away from high-current switching paths to reduce jitter and false transitions. This product page combines the manufacturer family information, catalog identification, lifecycle status, package details, and application-specific engineering guidance. It also distinguishes the exact SY89537LMH orderable MPN from related family and packaging references, helping engineers evaluate legacy clock-generator designs without overlooking the distinction between functionality, order code, and physical availability.

詢價 聯絡我們
SY89538LHG - 756MHz Zero-Delay Clock Synthesizer | Microchip
SY89538LHG

SY89538LHG - 756MHz Zero-Delay Clock Synthesizer | Microchip

The Microchip Technology SY89538LHG is a 756 MHz precision clock synthesizer and fanout buffer with an integrated PLL, zero-delay operation, and five independently programmable output banks. The device supports a 2.375 V to 3.6 V supply range and is packaged in a 64-pin TQFP with an exposed pad. Its architecture combines clock synthesis, logic-level translation, and low-skew distribution in one timing device. A clock synthesizer and fanout buffer is a timing IC that generates or distributes one or more related clock signals while controlling frequency, phase, voltage standards, and output-bank configuration. The PLL allows an external reference or crystal to establish a stable internal clock, while the fanout section routes multiple outputs to demanding digital, communications, and data-conversion systems. Within the timing hierarchy, the SY89538LHG is a clock generator, PLL-based synthesizer, and fanout buffer within the broader clock and timing IC category. Five independently programmable output banks are the central functional feature of the SY89538LHG. This arrangement reduces the number of discrete clock buffers required when several destinations need related but independently controlled clocks. The device accepts CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL inputs and produces LVDS or LVPECL outputs. Logic-level translation broadens its usefulness in mixed-signal, networking, processor, storage, and test systems. The zero-delay architecture places the device within deterministic clock-distribution designs where minimizing added latency and part-to-part skew is important. The manufacturer datasheet describes five independent output banks and emphasizes reduced additive jitter and skew compared with discrete clock networks. A 756 MHz maximum frequency supports high-speed interfaces and digital subsystems, while the common 3.3 V operating range simplifies power architecture. The exposed thermal pad provides a direct path for heat removal from the PLL and output circuitry. Typical uses include network-interface clock distribution, processor and serializer reference clocks, parallel data converters, test-and-measurement equipment, and industrial control systems. In a communications chassis, one reference can feed several independently programmed LVPECL or LVDS banks, reducing clock-tree complexity. The device can also translate supported input standards into output standards required by multiple logic domains. PCB implementation requires careful treatment of the exposed pad, supply decoupling, and high-speed clock routing. Place the input, output, and bypass components close to their associated pins, provide a continuous ground reference beneath the package, and follow the manufacturer pin-description table when assigning tracks. Differential clock routing should use matched geometry and controlled impedance, while unused outputs require the termination configuration specified by the manufacturer datasheet. This page consolidates the SY89538LHG device identity, timing functionality, supported logic levels, package information, selection guidance, and engineering design notes. It is intended to help designers determine whether the 64-pin zero-delay architecture fits a clock-distribution requirement before completing schematic, layout, and signal-integrity validation.

詢價 聯絡我們
SY89538LHH - 756 MHz LVPECL/LVDS Clock Synthesizer | Microchip
SY89538LHH

SY89538LHH - 756 MHz LVPECL/LVDS Clock Synthesizer | Microchip

The Microchip Technology SY89538LHH is a precision 3.3 V LVPECL and LVDS programmable multiple-output bank clock synthesizer and fanout buffer with zero-delay operation. It supports clock frequencies up to 756 MHz, a 2.375 V to 3.6 V operating supply range, five independently programmable output banks, and differential clock inputs in CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL formats. The device is packaged in a 64-pin TQFP with an exposed pad for improved thermal performance. A clock synthesizer is a clock-and-timing IC that generates or distributes multiple related clock signals while controlling frequency, phase, and output-bank relationships. Within the broader semiconductor hierarchy, the SY89538LHH belongs to the clock generator and fanout buffer class, which supports PLLs, logic-level translation, and synchronized multi-output clock architectures used in telecommunications, industrial control, instrumentation, and data-processing equipment. Five independently programmable output banks provide flexible clock distribution from one synchronization core. Logic translation between LVPECL and LVDS allows the same device to connect to clock inputs using either signaling convention. The maximum operating frequency of 756 MHz supports demanding digital systems, while the 2.375 V minimum and 3.6 V maximum supply limits place it in a low-voltage 3.3 V design class. Its operating-temperature range is specified from 0°C to 85°C. The integrated architecture reduces the number of separate oscillator, divider, translation, and fanout components otherwise required for a multi-clock design. Zero-delay operation makes the device useful where clocks must be phase-aligned rather than merely frequency-aligned. The exposed-pad package provides a thermal path into the PCB, allowing heat to be removed through copper planes without requiring a separate heatsink in typical implementations. Typical uses include telecommunications line cards, network-interface clock trees, industrial control systems, test equipment, and high-speed digital backplanes. In these systems, the synthesizer can generate related clock outputs, translate LVPECL or LVDS signals, and distribute each output to multiple loads while maintaining controlled relationships among banks. PCB design should provide a low-impedance ground plane, route high-speed differential clock nets as controlled-impedance pairs, and place decoupling capacitors close to the supply pins. The exposed pad must be connected to the appropriate ground plane and thermally coupled with via arrays. Differential trace length matching, return-path continuity, and isolation from noisy switching nodes are essential for maintaining clock quality and minimizing skew. This product page combines device specifications, family relationships, package information, practical layout guidance, and application-oriented engineering context. It is intended to help designers determine whether the SY89538LHH architecture matches their required frequency, logic levels, thermal environment, and board-level clock-distribution architecture.

詢價 聯絡我們
SY89611RMG - Precision LC-Tank Clock Synthesizer | Microchip
SY89611RMG

SY89611RMG - Precision LC-Tank Clock Synthesizer | Microchip

The Microchip Technology SY89611RMG is a precision LC-tank clock synthesizer and jitter-cleaner integrated circuit packaged in a 32-pin VQFN measuring 5 x 5 x 0.9 mm. It is intended for clock-generation and timing applications where a stable, low-jitter reference is required by the downstream signal chain. The device belongs to the clock synthesizer and jitter cleaner category, a functional grouping commonly used by distributors for clock-management ICs, PLL-based synthesizers, and frequency-generation products. A clock synthesizer converts an input reference into one or more controlled output clocks, while a jitter cleaner reduces timing variation in a clock path. In precision LC-tank implementations, the resonator is commonly formed with an external inductor and capacitor network, allowing the frequency-setting network to be placed according to the application's reference and layout requirements. The SY89611RMG is identified by Microchip Technology as a Precision LC-Tank Synthesizer, making it suitable for designers evaluating stable local clock generation, communication timing, test equipment, or instrumentation. The primary package information available for SY89611RMG is a 32-lead VQFN in a 5 x 5 x 0.9 mm outline. The RMG suffix is associated with the manufacturer's ordering and packaging system; distributor listings identify the part as a tube-packaged device. Because this package uses fine-pitch contacts and a bottom-side thermal and electrical land pattern, PCB layout should follow the Microchip land pattern and the pin-description table in the manufacturer datasheet rather than a generic QFN drawing. SY89611RMG is listed by Microchip Technology as an active catalog component, with distribution pages from Mouser, DigiKey, Arrow, Octopart, OMO, PCB Electronics, TrustedParts, Unikeyic, JAK Electronics, and OEM Secrets. Availability and commercial terms can change, so use the Request a Quote form on this page for current quotation, minimum-order, lead-time, and shipping confirmation. The key engineering workflow is to select the external resonator or LC network from the manufacturer recommendation tables, verify the target output frequency and tolerance against the system clock budget, and then validate loop bandwidth, reference jitter, and supply-noise behavior on the finished PCB. Keep the clock outputs away from noisy power-converter loops, provide the specified bypass capacitors, and route sensitive clock lines over a continuous reference plane. This page consolidates the verified product identity, package details, distributor records, application guidance, and practical design notes for engineers who need a clock synthesizer with an LC-tank architecture. It also explains where to obtain the authoritative pinout, datasheet, and current sourcing information for SY89611RMG.

詢價 聯絡我們
SY89808LTG - 500 MHz 1:9 HSTL Fanout Buffer | Microchip
SY89808LTG

SY89808LTG - 500 MHz 1:9 HSTL Fanout Buffer | Microchip

The Microchip Technology SY89808LTG is a 3.3 V clock fanout buffer and level translator with nine differential HSTL output pairs, a maximum clock frequency of 500 MHz, and a 32-pin TQFP package. It accepts two clock or data inputs and provides nine outputs, creating a 2:9 fanout configuration with differential HSTL signaling compatible with 1.5 V receivers. A clock buffer is an integrated circuit that reproduces and distributes a timing signal without imposing excessive loading on its source. Clock and digital logic ICs belong to the broader clock and timing semiconductor category, with applications in processor interfaces, network equipment, test systems, and high-speed digital control. Fanout buffers are especially useful when one source must feed several receivers while preserving edge timing, signal integrity, and electrical loading margins. The SY89808LTG supports up to 500 MHz operation and includes a triple-buffered enable function. Its 3.3 V core supply operates separately from the 1.8 V output supply, allowing the output-stage voltage to be selected for HSTL-compatible interfaces while the internal circuitry operates from 3.3 V. The nine differential outputs provide a practical means of reducing sensitivity to common-mode noise and accommodating balanced clock distributions. This device is intended for high-speed clock distribution, data translation, and point-to-point differential signaling. Its input and output stages divide the clock tree into multiple independently routed branches, helping each destination maintain controlled impedance and trace length. The triple-buffered enable function allows the downstream receivers to be placed into a controlled state when clock distribution is not required, which can simplify initialization and reduce unnecessary circuit activity. Typical uses include high-speed processor clock trees, communications equipment, networking infrastructure, instrumentation, and industrial control systems. It is also suitable where a single clock must feed several chips across a board while maintaining a 500 MHz maximum operating rate. Designers should consider transmission-line behavior, receiver thresholds, clock jitter, and trace length matching when assigning the differential outputs. Place the SY89808LTG so that each differential pair follows a continuous, impedance-controlled route to its destination. Keep the clock source connections short, maintain symmetry between positive and negative traces, and avoid introducing unnecessary stubs. Because clock quality degrades when rise time, reflections, and crosstalk are not controlled, PCB stackup and receiver requirements should be reviewed before fabrication. This product page consolidates the manufacturer's principal clock, voltage, package, and signaling specifications with practical PCB guidance. It also distinguishes verified drop-in replacements from parts that merely share a similar clock-buffer function, helping engineers assess replacement risk before changing a released PCB design.

詢價 聯絡我們
SY89808LTI - 500MHz 1:9 Differential HSTL Buffer | Microchip
SY89808LTI

SY89808LTI - 500MHz 1:9 Differential HSTL Buffer | Microchip

The Microchip Technology SY89808LTI is a 3.3 V, 500 MHz, 1:9 differential HSTL fanout buffer and voltage translator in a 32-pin TQFP package. The device accepts one differential input and provides nine differential outputs, giving a total fanout ratio of 1:9. Its 1.5 V HSTL interface level supports high-speed digital signaling while the 3.3 V supply architecture separates interface voltage from the internal operating voltage. A differential fanout buffer is a clock-and-timing semiconductor that preserves a differential clock or data signal while distributing it to multiple destinations. Its role in the hierarchy is clock buffer → fanout buffer → clock and timing IC → semiconductor. HSTL is a low-swing, source-terminated signaling method commonly used for high-speed digital interconnects. Translating and buffering the signal at the distribution point helps drive multiple loads without loading the original source. The SY89808LTI’s principal specifications are its 500 MHz operating frequency, 1:9 fanout ratio, 3.3 V supply voltage, differential input and output architecture, and 1.5 V HSTL signal level. These characteristics make the device applicable where one high-speed differential source must reach multiple downstream circuits while maintaining a consistent voltage interface. The 1:9 ratio allows a single input branch to feed nine output branches without requiring nine separate source buffers. The differential architecture is particularly useful when signal integrity depends on matched edge timing through a multi-drop board topology. A common source can drive the buffer input, while the nine outputs provide local distribution points for receivers, controllers, memory interfaces, or downstream clock-generating circuits. Because skew and return-loss performance depend on PCB topology, trace length matching, termination, and reference-plane continuity, the implementation around the device is as important as the stated operating frequency. Typical uses include high-speed parallel-processing systems, networking and communications equipment, test and measurement systems, data-conversion platforms, and clock distribution around FPGAs or other digital controllers. A single high-speed differential clock can be distributed to multiple parallel destinations, while the translator function supports interfacing between 1.5 V HSTL logic and circuitry operating from a 3.3 V supply. For a new layout, place the device so that input and output differential pairs have matched impedances and controlled length. Follow the manufacturer’s pin-description and layout guidance when assigning termination and decoupling. Avoid introducing long stubs between the outputs and their receivers because stubs can create reflections that reduce the usable bandwidth below the 500 MHz device capability. This product page consolidates the verified SY89808LTI function, package, interface, and sourcing information with practical clock-distribution guidance. It also identifies where detailed electrical, pin-level, environmental, and lifecycle information must be confirmed in the manufacturer datasheet before a production design is released.

詢價 聯絡我們
SY89809LTC - 500 MHz 1:9 HSTL Clock Driver | Microchip
SY89809LTC

SY89809LTC - 500 MHz 1:9 HSTL Clock Driver | Microchip

The Microchip Technology SY89809LTC is a 3.3 V 1:9 high-performance bus clock driver with nine differential HSTL output pairs, designed for low-voltage systems operating at 3.3 V or 1.8 V. It operates up to 500 MHz and is packaged in a 32-pin TQFP. The device includes one clock input and nine differential outputs, making it suitable for distributing a high-speed source clock across multiple loads in computer, communications, and test equipment systems. A bus clock driver is a clock and timing integrated circuit that reproduces or buffers a clock signal while providing multiple outputs for system distribution. In the signal path, a clock buffer can increase fanout, isolate a source from downstream loading, and help maintain edge quality when driving multiple circuit groups. The SY89809LTC uses differential HSTL signaling, which supports robust high-speed transmission over controlled-impedance printed circuit board traces. The key features of the SY89809LTC include a 1:9 fanout ratio, nine differential HSTL output pairs, a maximum operating frequency of 500 MHz, and compatibility with low-voltage 3.3 V and 1.8 V applications. The 32-pin TQFP package provides a surface-mount solution for compact systems requiring numerous clock outputs. The device is categorized as a clock fanout buffer and multiplexer with HSTL input and HSTL output. Technically, the SY89809LTC is intended for high-performance bus-clock distribution rather than low-frequency general-purpose clock buffering. Differential clock distribution helps reduce sensitivity to common-mode noise on the PCB when trace impedance, pair spacing, and termination are controlled correctly. The 1:9 ratio allows one source clock to feed nine output pairs, reducing the number of separate buffering stages required in a multi-load clock tree. Typical uses include processor clock distribution, memory-interface clock fanout, communications backplanes, test-and-measurement systems, and other high-speed digital platforms. In a processor or memory system, the device can distribute a central clock to several controller groups while limiting source loading. In communications equipment, the nine outputs can serve multiple modules or logical partitions, subject to the signal-integrity requirements of the complete board. Design attention should be given to differential trace impedance, pair length matching, power-supply decoupling, and the electrical requirements of the connected HSTL devices. Place the device close to the clock source when the source has limited fanout capability, and route each differential pair as a controlled-impedance structure. Confirm the complete clock-tree topology and termination arrangement with the system-level timing and signal-integrity requirements. This product page combines the manufacturer identification, package information, operating-frequency data, lifecycle information, application guidance, comparison fields, and verified source links for SY89809LTC. It is intended to help engineers establish the component identity, understand its clock-distribution role, and plan a qualified replacement or redesign review.

詢價 聯絡我們
SY89809LTH - 2:9 500 MHz Clock Fanout Buffer | Microchip
SY89809LTH

SY89809LTH - 2:9 500 MHz Clock Fanout Buffer | Microchip

The Microchip Technology SY89809LTH is a 2:9 clock fanout buffer and multiplexer IC with a maximum clock frequency of 500 MHz, supplied in a 32-pin TQFP package. It accepts LVPECL and HSTL clock inputs and produces nine differential HSTL output pairs for high-speed clock distribution. The SY89809LTH is intended for systems that need one source clock to be distributed across multiple destination circuits without introducing excessive part-to-part or pin-to-pin skew. A clock fanout buffer is a clock-management semiconductor that reproduces an incoming periodic signal across multiple outputs. Clock buffers and drivers sit within the clock and timing hierarchy, where they complement oscillators, phase-locked loops, dividers, and multiplexers. Their principal design roles are to restore signal integrity, provide output drive, isolate destinations, and maintain predictable timing relationships across a board or backplane. The SY89809LTH supports a maximum operating frequency of 500 MHz. Its input interface accepts both LVPECL and HSTL signals, allowing compatibility with several common high-speed clocking conventions. The output stage provides nine differential HSTL pairs, while the documented output configuration is capable of driving 50 ohms to ground without an offset voltage. These characteristics make the device applicable to demanding clock-distribution trees rather than low-frequency general-purpose buffering. Timing performance is a central consideration for this device. The Micrel manufacturer datasheet specifies a maximum part-to-part skew of 200 ps and a maximum pin-to-pin skew of 50 ps. Pin-to-pin skew describes variation between outputs of the same device, while part-to-part skew covers variation between different devices. These limits are particularly important when clocked logic must maintain source-synchronous relationships or when downstream receivers operate with limited timing margins. Typical uses include high-speed server and storage interfaces, network-switch backplanes, telecommunications equipment, test-and-measurement systems, and other multi-drop clocking architectures. The device can also support clock muxing and distribution where two input sources must feed nine output locations. System designers should preserve controlled impedance and adequate return paths between the driver and each receiver to maintain the intended signal quality. The principal design trade-off is operating speed versus integration and termination complexity. A 500 MHz differential HSTL clock network requires careful PCB stack-up, impedance control, termination, and clock-tree topology. The SY89809LTH provides nine differential outputs in one package, reducing the number of separate fanout stages needed for a wide distribution network. This page consolidates the device's clock topology, frequency, interface, skew, package, and sourcing characteristics, then adds application guidance and verified-source links. It also distinguishes the LTH tray designation from other ordering options and explains what an engineer should confirm before treating another device as a drop-in replacement.

詢價 聯絡我們
SY89823LHG - 500 MHz 2:22 Clock Driver | Microchip Technology
SY89823LHG

SY89823LHG - 500 MHz 2:22 Clock Driver | Microchip Technology

The Microchip Technology SY89823LHG is a high-speed fanout buffer and clock distributor rated for operation up to 500 MHz, with two inputs, a 2:22 input-to-output ratio, and differential input and output capability. The device is packaged in a 64-pin TQFP with an exposed pad and uses HSTL and LVPECL signal formats. According to the manufacturer datasheet listing, the SY89823LHG is obsolete, so new designs should confirm lifecycle status and consider a supported current-generation alternative before committing a footprint. A clock buffer belongs to the clock and timing IC category. It is a specialized digital semiconductor that redistributes or translates one or more incoming clock signals into multiple outputs. Clock drivers are used to increase fanout, isolate source and destination circuits, match clock-domain voltage levels, and preserve timing relationships across large or electrically demanding systems. The SY89823LHG combines distribution, multiplexing or translation, and differential signaling in one Precision Edge device. The principal headline ratings are a maximum frequency of 500 MHz, two clock inputs, 22 outputs per input, and a 64-TQFP exposed-pad package. Its 1:22 fanout arrangement can reduce the number of separate distribution stages required in a complex backplane, processor, networking, or test-system clock tree. HSTL and LVPECL support are significant because they address high-speed logic-interface requirements where voltage compatibility, common-mode behavior, and edge quality directly affect reliable clock delivery. The SY89823LHG belongs to the Precision Edge clock-buffer family and is described as a fanout buffer, multiplexer, translator, or distribution device. Its 2:22 ratio allows a compact clock-tree architecture, but implementation still requires correct input termination, controlled impedance routing, adequate return paths, and power-plane distribution. The exposed pad is an important thermal and electrical feature because it provides a direct path for heat removal from the die and can be bonded to a low-impedance ground plane under the device. Typical applications include telecommunications and networking clock distribution, high-speed digital backplanes, processor and serializer clock trees, server platforms, FPGA fabric distribution, and instrumentation. These uses benefit from the device's high operating frequency and 22-way fanout, particularly where multiple loads need a locally regenerated clock rather than a long point-to-point clock route. The principal design trade-off is lifecycle: the manufacturer datasheet listing identifies the SY89823LHG as obsolete. Existing equipment can still benefit from its established 500 MHz capability and 64-pin footprint, but engineers should verify pin assignments, supply requirements, output behavior, and available replacement options against the manufacturer datasheet before using it in a new design. This page also distinguishes documented functions from unspecified electrical details so that PCB and signal-integrity decisions are not based on guessed values.

詢價 聯絡我們
SY89823LHI - 500MHz 1:22 HSTL Clock Buffer | Microchip
SY89823LHI

SY89823LHI - 500MHz 1:22 HSTL Clock Buffer | Microchip

The Microchip Technology SY89823LHI is a 3.3 V, 500 MHz, 1:22 differential HSTL fanout buffer and translator housed in a 64-pin TQFP package with an exposed pad. It accepts one differential clock source and provides 22 differential outputs, giving a 1:22 fanout ratio for high-speed clock distribution. Its 1.5 V HSTL signaling supports modern processor, communications, and networking systems in which low-voltage differential clocking is required. A high-speed differential clock buffer is a clock and timing IC that reproduces a differential clock across multiple outputs while preserving signal integrity, edge alignment, and source impedance. In the broader semiconductor hierarchy, the SY89823LHI belongs to the clock-buffer and translator class within clock and timing integrated circuits. Its fanout function reduces the number of separate clock sources required by a multi-channel or multi-board system. The headline operating specifications are a 3.3 V supply, operation up to 500 MHz, a 1:22 differential fanout ratio, and 1.5 V HSTL output signaling. The 64-pin TQFP exposed-pad package provides the physical interface for the input, 22 differential output channels, power connections, and control or configuration functions defined by the manufacturer. Its principal engineering benefit is consolidated high-speed clock distribution, reducing routing complexity when many destinations require the same differential clock. At the circuit level, the device separates clock generation from clock distribution. A low-jitter source can feed the differential input, while the SY89823LHI supplies matched output branches for downstream circuits. Maintaining controlled impedance, short trace lengths, continuous return paths, and appropriate termination is essential when routing 500 MHz differential signals. The exposed thermal pad should be connected to the supply or ground plane as directed in the manufacturer datasheet and evaluated against the system thermal budget. Typical design uses include processor and communications clock distribution, networking-equipment backplanes, high-speed serial-interface subsystems, FPGA clock trees, and multi-channel test equipment. The part is especially relevant where one differential clock must reach many receiving circuits and cable or board losses make local regeneration preferable to long point-to-point distribution. The system designer must also verify timing budget, return loss, channel skew, and power-supply behavior for the completed board. A critical design consideration is that a 1:22 fanout does not eliminate endpoint-specific loading or trace differences. Each output should have a controlled termination and matched routing environment, while unused channels should be handled according to the manufacturer’s recommended termination scheme. Power and ground planes must provide low-impedance paths at 500 MHz, and bypass connections should be placed close to the supply pins to limit supply-noise coupling into the clock network. This product page consolidates the device identification, electrical characteristics, application guidance, and engineering trade-offs needed to plan a clock-distribution design. It also separates verified device facts from parameters that must be confirmed in the manufacturer datasheet, helping engineers assess fit without relying on a simple distributor listing.

詢價 聯絡我們
SY89824LHC - 1:22 HSTL Clock Driver | Microchip
SY89824LHC

SY89824LHC - 1:22 HSTL Clock Driver | Microchip

The Microchip SY89824LHC is a 3.3 V, 1:22 low-voltage bus clock driver with two LVPECL or HSTL inputs and 22 differential HSTL output pairs, packaged in a 64-pin TQFP with exposed pad. It provides a fanout ratio of 1:22, maximum part-to-part skew of 200 ps, and HSTL outputs that drive 50 ohm terminations to ground without added offset voltage. A clock buffer or fanout driver is a timing IC that distributes one or more input clock signals across multiple outputs. Clock buffers preserve signal amplitude and edge timing while reducing loading on the source. A differential clock driver additionally transmits a clock as a complementary pair, improving noise immunity and making the device suitable for high-speed backplanes, processor interfaces, telecommunications equipment, and clock-distribution networks. The SY89824LHC accepts LVPECL and HSTL input signals, operates from a 3 V to 3.6 V supply, and produces 22 complementary HSTL output pairs. Its 1:22 fanout allows one source clock to support as many as 22 destination loads. The specified 200 ps maximum part-to-part skew helps maintain timing relationship between outputs when the device is used to distribute a common clock. Each HSTL output can drive 50 ohm to ground with no offset voltage, reducing the termination complexity normally encountered with single-ended clock networks. The device is described as a high-performance, low-voltage bus clock driver designed for 3.3 V systems. Its 64-pin TQFP exposed-pad construction supports controlled heat dissipation and high-density printed-circuit-board layouts. Typical applications include server and networking backplanes, telecommunications line cards, storage controllers, processor clock trees, test equipment, and other systems that require multiple low-voltage differential clock outputs. In a backplane, the SY89824LHC can distribute a source clock while isolating the source from the capacitance and termination load presented by multiple destinations. PCB design should preserve controlled-impedance routing for differential clock paths and provide the power and ground connectivity required by the exposed pad. Use the pin-description and layout guidance in the manufacturer datasheet when assigning connections. Confirm input logic levels, output termination, supply decoupling, and trace topology in simulation before releasing the layout. This product summary combines the device function, fanout, logic-level, package, and timing characteristics with practical PCB guidance, source links, and verified drop-in-equivalent status. It supports faster component selection without presenting an unsupported cross-reference or an unconfirmed replacement as a drop-in option.

詢價 聯絡我們
SY89825UHG - 2 GHz 2:22 Clock Fanout Buffer | Microchip Technology
SY89825UHG

SY89825UHG - 2 GHz 2:22 Clock Fanout Buffer | Microchip Technology

The Microchip Technology SY89825UHG is a high-speed clock fanout buffer, multiplexer, and translator IC with a 2:22 fanout ratio and a maximum operating frequency of 2 GHz. It is housed in a 64-pin TQFP package with an exposed pad. The device is designed for clock distribution and signal routing applications where multiple high-speed outputs are required from a common source. A clock fanout buffer is a type of clock buffer and clock driver. Its function is to replicate a single input clock across multiple output paths, increasing drive capacity while preserving timing relationships between distributed clocks. In the system hierarchy, the SY89825UHG belongs to the clock and timing IC category, specifically the clock buffer and driver family used within digital, communications, and test systems. The verified product information identifies the SY89825UHG as a 2:22 clock fanout buffer with LVDS and LVPECL inputs and LVPECL outputs. Its 2 GHz maximum frequency makes it suitable for high-speed clock distribution, data-converter clocking, networking equipment, and other systems requiring multiple synchronized clock outputs. The 64-pin TQFP exposed-pad package provides a defined PCB footprint and exposed thermal area for thermal management. The SY89825UHG is particularly useful when a design must distribute one clock source across many loads while maintaining compatible electrical signaling. The input stage accepts differential signaling, while the output stage uses LVPECL output signaling. Differential clock distribution can reduce susceptibility to common-mode noise and is widely used in high-speed digital and communications equipment. The device also supports clock multiplexing and signal translation within the same package. Designers should pay close attention to input and output termination, power-supply decoupling, clock-routing geometry, and exposed-pad thermal management. Differential transmission lines should be routed with controlled impedance, and unused outputs should be handled according to the manufacturer’s recommended output-termination and test configuration. The exposed pad should be connected to the appropriate ground plane using the package land pattern and thermal-via pattern specified by Microchip Technology. SY89825UHG is positioned for applications where a broad fanout and high operating frequency are more important than a small package or low pin count. It is especially relevant to parallel clock trees, high-speed backplanes, communication equipment, instrumentation, and digital processing platforms. Request current lifecycle, lead-time, and sourcing information through the Request a Quote form on this page.

詢價 聯絡我們
SY89825UHI - 2 GHz 1:22 LVPECL Clock Driver | Microchip
SY89825UHI

SY89825UHI - 2 GHz 1:22 LVPECL Clock Driver | Microchip

The Microchip Technology SY89825UHI is a high-performance, low-voltage PECL bus clock driver and translator with 2:1 multiplexed inputs, 22 LVPECL outputs, a maximum operating frequency of 2 GHz, and a 64-pin TQFP exposed-pad package. It operates from a 2.5 V or 3.3 V supply and accepts LVDS or LVPECL clock inputs while providing LVPECL outputs. A clock fanout buffer, also called a clock distribution or fanout driver, distributes one high-speed clock signal to multiple loads. This architecture reduces loading, isolates the source from downstream receiver loading, and helps maintain consistent clock timing across a multi-drop bus. The SY89825UHI combines this distribution function with input translation and a 2:1 multiplexer, allowing one device to select between two incoming clock sources. The device provides a 1:22 fanout ratio, with two selectable inputs feeding 22 LVPECL outputs. Its maximum frequency is 2 GHz, making it suitable for telecommunications, networking, industrial control, test equipment, and high-speed digital systems. Internal input termination supports practical board-level use of LVDS or LVPECL sources without requiring a separate termination network on every input. Timing performance is a key benefit of the SY89825U family. The manufacturer datasheet specifies a maximum pin-to-pin skew of 35 ps, helping preserve timing margin across the large number of distributed outputs. Combining a multiplexer, level translator, and fanout driver in one package reduces component count and can simplify board partitioning compared with a discrete arrangement of buffers, translators, and routing. Typical clock-tree uses include backplane clock distribution, telecommunications line-card clocking, network-interface timing, industrial data-acquisition systems, and test-and-measurement platforms. The 64-pin TQFP exposed-pad package provides many output connections in a single device, although its size and pin count make careful fanout routing essential. PCB implementation should preserve controlled-impedance routing, provide a continuous ground reference beneath the clock traces, and decouple the 2.5 V or 3.3 V supply close to the device. The exposed pad requires the layout and assembly recommendations in the manufacturer datasheet, including appropriate thermal-via and copper treatment, to avoid a junction-temperature rise during sustained high-frequency operation. This product page combines the principal SY89825UHI electrical characteristics, package information, verified drop-in relationship, and application-oriented design guidance. It is intended to help engineers evaluate the 2 GHz, 1:22 architecture and plan a complete LVPECL clock tree before releasing a PCB layout.

詢價 聯絡我們
SY89826LHI - 1 GHz 22-Output LVDS Fanout Buffer | Microchip
SY89826LHI

SY89826LHI - 1 GHz 22-Output LVDS Fanout Buffer | Microchip

The Microchip Technology SY89826LHI is a 3.3 V precision 1:22 LVDS fanout buffer and translator with 22 differential LVDS output pairs, a 1 GHz operating specification, and a 2:1 input multiplexer in a 64-pin TQFP exposed-pad package. It is designed for systems that distribute one differential clock or low-skew signal across many destinations while maintaining tightly controlled timing. A fanout buffer is a clock-and-timing IC that receives a source signal and reproduces it across multiple output branches. The SY89826L family uses LVDS, or Low Voltage Differential Signaling, to provide low-noise, low-voltage differential transfer over a board-level interconnect. Its translator function allows the input stage to accept either LVDS or LVPECL signals, providing flexibility when a design receives clocks from different interface domains. Key features include 22 differential LVDS outputs, a 1:22 fanout ratio, a 2:1 multiplexed input, a 3.3 V supply, and a maximum operating frequency identified as 1 GHz. The manufacturer describes the device as a precision fanout buffer for low-voltage 3.3 V applications requiring a large number of outputs to drive precisely aligned, ultra-low-skew signals. The 64-EP-TQFP package provides 64 electrical positions and an exposed thermal pad for board-level heat spreading. Typical applications include high-speed backplane clock distribution, parallel data acquisition systems, communications equipment, and test-and-measurement platforms where many synchronized destinations require controlled skew. The 2:1 input mux is useful when two source clocks must be selected into one distribution network. The device is a clock and timing IC rather than a power semiconductor, so a safe operating area curve is not applicable. Designers should follow the manufacturer datasheet for the input logic thresholds, output termination, decoupling, package land pattern, and exposed-pad connection. Differential pairs should be routed with matched geometry and controlled impedance. The input mux selection and output enable functions must be sequenced to prevent simultaneous switching of incompatible clock sources. This page combines the manufacturer’s product description with distributor identification, application guidance, packaging information, and a conservative comparison framework for engineers evaluating the SY89826L family.

詢價 聯絡我們
SY89826LHY - 1 GHz 22-LVDS Fanout Buffer | Microchip
SY89826LHY

SY89826LHY - 1 GHz 22-LVDS Fanout Buffer | Microchip

The Microchip Technology SY89826LHY is a 3.3 V precision 1:22 LVDS fanout buffer and translator with a 2:1 input multiplexer, operating up to 1 GHz in a 64-TQFP exposed-pad package. It provides 22 differential LVDS output pairs for distributing precisely aligned, low-skew clock signals across multiple destinations. A clock fanout buffer is a clock-management IC that receives one source clock and generates multiple buffered copies. Clock buffers and drivers belong to the clock and timing IC family, where they provide fanout, translation, isolation, and signal conditioning. The SY89826LHY combines this function with differential signal translation and input multiplexing for systems requiring flexible clock-source selection. The principal features are a 1 GHz operating frequency, 1:22 fanout ratio, 22 differential LVDS output pairs, 2:1 input multiplexing, and a 3.3 V supply. These functions allow one device to select between two input sources and distribute the selected clock to a large number of LVDS receivers while maintaining consistent edge relationships across the output network. The device is intended for low-voltage 3.3 V clock-distribution systems where many receivers require differential clock inputs. Its LVDS outputs suit point-to-point interconnects on circuit boards, backplanes, and rack-level systems. The exposed pad beneath the 64-TQFP package provides a thermal connection to the PCB, while the multiplexed inputs reduce the number of separate source-selection components required in a multi-clock architecture. Typical applications include synchronized computing and networking equipment, communication backplanes, test and measurement systems, industrial control electronics, server clock distribution, and high-speed instrumentation. In each case, the central design objective is to provide many low-skew differential clock outputs from one or two incoming sources. Layout is critical because 22 differential outputs magnify trace-length, impedance, return-path, and crosstalk sensitivity. Follow the pin-description table and recommended decoupling arrangement in the Microchip datasheet, preserve controlled-impedance routing for LVDS pairs, and connect the exposed pad to a low-impedance thermal plane. Validate output skew and signal integrity on the finished board because package and routing effects can influence system-level timing margins. This product page combines the manufacturer's functional description with package, sourcing, comparison, and layout guidance. It also distinguishes true drop-in options from ordering-code variants and documents which electrical details require confirmation from the complete manufacturer datasheet before a production release.

詢價 聯絡我們