產品(42,000+)

Z86C9620VSC - 20MHz ROMless 8-Bit MCU | Zilog
Z86C9620VSC

Z86C9620VSC - 20MHz ROMless 8-Bit MCU | Zilog

The Zilog Z86C9620VSC is a Z8 ROMless 8-bit microcontroller operating at up to 20 MHz in a 68-pin PLCC package. The device provides 16 Kbytes of ROM-family program space and 256 bytes of RAM according to the Z86C61/62/96 microcontroller family description. Its key characteristics are the 8-bit architecture, 20 MHz operating frequency, ROMless configuration, and 256-byte RAM. The Z86C9620VSC is intended for embedded control designs that require external program memory while retaining the compact timing and peripheral resources associated with the Z8 family. A ROMless microcontroller is an 8-bit MCU architecture in which the application program is stored in external memory rather than embedded ROM. The Z86C9620VSC is part of the Zilog Z8 single-chip microcontroller family, which sits within the broader hierarchy of microcontroller, embedded processor, and semiconductor categories. External program memory allows the implementation to use the MCU with a separate memory device, a configuration useful for products whose firmware size or update requirements differ from a fixed-ROM design. The most important engineering features are the 20 MHz maximum operating frequency, 8-bit CPU, ROMless organization, 16 Kbytes of ROM-family capacity, and 256 bytes of RAM. These specifications make the device suitable for embedded control, industrial interface, appliance control, and legacy peripheral-control designs. The PLCC package provides a 68-pin mechanical format and is intended for through-hole board assembly rather than a compact surface-mount land pattern. The Z8 architecture provides a simple execution environment for control logic, timers, serial communication, and peripheral interfacing. Because the device is ROMless, the external memory interface and associated address, data, and control routing are central to the hardware design. Board designers should use the manufacturer pin-description table when assigning signals, because the exact peripheral mapping and alternate-function details for the selected package must be followed precisely. Typical applications include industrial equipment controllers, legacy communication adapters, printer and appliance control boards, embedded instrumentation, and system-control modules. The 20 MHz clock rate provides more timing headroom than slower general-purpose 8-bit controllers, while the 256-byte RAM supports short working buffers, state variables, and stack-intensive control routines. External program memory is the principal tradeoff compared with a ROM-equipped MCU. For a new PCB, preserve the 68-pin PLCC footprint and route the external memory bus away from sensitive analog or communication nodes. Confirm the oscillator, reset, power, programming, and memory interface requirements against the manufacturer datasheet. If software or production tooling depends on a specific Zilog toolchain, validate tool and programmer support before committing to the device. This page combines the Z86C9620VSC device identity, package information, engineering selection guidance, practical design notes, and verified manufacturer-family references for embedded product planning. Use the exact Z86C9620VSC ordering code and the manufacturer datasheet for production release, programming, and manufacturing documentation.

詢價 聯絡我們
Z86E0308PSG - 8-Bit Z8 OTP MCU, 8MHz | Zilog
Z86E0308PSG

Z86E0308PSG - 8-Bit Z8 OTP MCU, 8MHz | Zilog

The Zilog Z86E0308PSG is an 8-bit Z8 CMOS microcontroller with 512 bytes of one-time-programmable memory, an 8 MHz operating frequency, and support for 3.3 V or 5 V operation. It is packaged in an 18-pin PDIP. The device belongs to the Zilog Z8 family of small-format embedded microcontrollers designed for cost-sensitive control, monitoring, and simple peripheral-control applications. Its compact memory footprint, integrated digital control functions, and dual-voltage operation make it suitable for designs that need deterministic control without a larger application-specific processor. An OTP microcontroller stores programmed logic permanently, so the Z86E0308PSG is appropriate for finished products whose control firmware does not need field updates. The Z8 architecture uses an 8-bit instruction-oriented design and is commonly used for appliance controls, industrial interfaces, sensor conditioning systems, and embedded automation equipment. Its 3.3 V and 5 V capability helps designers support multiple supply environments without changing the controller family. The manufacturer identifies the Z86E0308PSG as an 8-bit MCU with 512-byte OTP memory and an 8 MHz maximum operating frequency. The 18-pin PDIP package provides a through-hole option for prototypes, educational designs, and production assemblies where leaded components are preferred. Because the exact peripheral allocation, electrical limits, pin names, and timing details are not listed in the retrieved product descriptions, engineers should use the Zilog Z86E03/E06 CMOS Z8 OTP Microcontrollers datasheet for the definitive pinout and timing reference. Typical implementations include simple motor and relay controllers, temperature and industrial monitoring units, keyboard interfaces, LED status panels, and low-cost embedded equipment. The 512-byte OTP limit is most suitable for compact control loops rather than protocol-heavy gateways, data logging, or applications requiring substantial RAM. In those designs, the MCU can handle discrete input decisions, timing, and peripheral coordination while external components provide sensing, actuation, communications, or power regulation. For a new layout, verify the 18-pin PDIP footprint, oscillator requirements, reset behavior, input thresholds, and programming procedure against the manufacturer datasheet before committing the PCB. Use the Request a Quote form on this page to request current commercial availability, lead time, and ordering information.

詢價 聯絡我們
Z86E0308SSG - 8-Bit 8MHz OTP Microcontroller | Zilog
Z86E0308SSG

Z86E0308SSG - 8-Bit 8MHz OTP Microcontroller | Zilog

Zilog Z86E0308SSG is an 8-bit Z8 microcontroller with 512 bytes of one-time-programmable memory, an 8 MHz operating frequency, and a 3 V to 5.5 V supply range. The device is packaged in an 18-pin SOIC with a 300 mil body width for through-hole assembly compatibility. It combines a compact embedded-control footprint with OTP program memory for cost-sensitive, low-volume embedded products. An 8-bit microcontroller is a compact computing device designed to execute control logic, monitor inputs, and drive outputs within appliances, instruments, and industrial equipment. The Z86E0308SSG belongs to the Z8 microcontroller family, combining a processor core, OTP program memory, timers, and serial I/O in one package. This architecture suits sequential control tasks where deterministic behavior and low component count matter more than high-bandwidth processing. Principal characteristics include an 8 MHz clock, 512 bytes of OTP program memory, and operation across a 3 V to 5.5 V supply range. Its 18-pin SOIC-18-300mil package supports conventional PCB assembly and inspection. The industrial temperature classification, gull-wing terminal arrangement, and rectangular package geometry are useful constraints when laying out a new board or sourcing a mechanically similar replacement. The Z8 architecture is intended for embedded control rather than high-volume data processing. One-time-programmable memory makes the programmed version of the device suitable for products whose firmware does not require field updates. Because the memory cannot be rewritten after programming, production programming, blank-device handling, and firmware revision control must be planned before devices reach the assembly line. Typical uses include small appliance controllers, instrumentation front ends, industrial control modules, sensor interfaces, and dedicated timing or sequence-control products. In these applications, the MCU can evaluate digital inputs, operate timers, update displays, and communicate with external peripherals while keeping the external component count and board area modest. When designing a board, verify the exact pin assignments, port capabilities, oscillator requirements, and programming interface against the manufacturer datasheet before routing signals. The 300 mil SOIC body is wider than a narrow 150 mil SOIC, so component clearance, connector placement, and assembly tooling must accommodate the specified package rather than a generic 18-pin footprint. This page consolidates distributor specifications, package constraints, drop-in comparison information, and application-level engineering guidance. It also distinguishes documented parameters from values that must be confirmed with Zilog before schematic release, helping designers move from part selection to a controlled PCB and firmware implementation.

詢價 聯絡我們
Z86E0412PEC - 8-Bit 1KB OTP Z8 MCU, 12MHz, PDIP-18 | Zilog
Z86E0412PEC

Z86E0412PEC - 8-Bit 1KB OTP Z8 MCU, 12MHz, PDIP-18 | Zilog

The Zilog Z86E0412PEC is an 8-bit CMOS Z8 one-time-programmable (OTP) microcontroller with 1KB (1K x 8) of OTP program memory, an operating frequency of 12 MHz, and an 18-pin PDIP through-hole package. It targets cost-sensitive, high-volume designs where a masked-ROM microcontroller would be uneconomic but where OTP simplicity still allows full software development, debug and prototyping. What is the Z8 MCU? A Z8 is an 8-bit RISC microcontroller core from Zilog that forms the basis of the Zilog MCU product family, sitting above the general class of 8-bit microcontrollers and below the broader embedded-controller category. ZiLOG positions these devices for consumer, automotive, security and HVAC applications where a small amount of code, low cost and simple one-time programming are the deciding factors. Key features of the Z86E0412PEC include 1KB of OTP ROM, 12 MHz maximum clocking, a Z8 CMOS CPU core with an internal oscillator and external crystal oscillator options, and a complete set of general-purpose I/O for sensing and driving. As an OTP device, the program memory is written once at the programming step, which removes the need for a masked-ROM order and sharply reduces unit cost in production volumes. The device is a standard Z86E04/E08 family member. Program development is typically performed on the same OTP silicon that ships in production, using the Z8 development tools and Zilog application notes for peripheral setup. Because it is OTP rather than flash, firmware changes after programming are not possible, so all functional qualification should be completed on production-intent units before the programming step. Typical applications include building-block security controllers, thermostat and HVAC control panels, appliance control boards, security keypad and access modules, motor and valve controllers, and simple consumer products with short, deterministic firmware. When designing around the Z86E0412PEC, respect the 18-pin PDIP footprint and the Z8 port mapping when allocating PCB tracks. Confirm oscillator component selection, reset behaviour and I/O drive capability against the pin descriptions in the manufacturer datasheet before layout is frozen. This page consolidates manufacturer documentation, distributor availability, drop-in replacement candidates, and practical design notes for the Z86E0412PEC, giving engineers a single reference for sourcing, pin assignment and second-source strategy.

詢價 聯絡我們
Z86E0412PEG - 8-Bit 12MHz OTP MCU | Zilog
Z86E0412PEG

Z86E0412PEG - 8-Bit 12MHz OTP MCU | Zilog

Zilog Z86E0412PEG is an 8-bit Z8 CMOS microcontroller operating at up to 12 MHz, with 1 KB of one-time-programmable program memory, 125 bytes of RAM, and 14 I/O pins in an 18-pin DIP package. It is intended for compact control systems that require deterministic embedded control in a low-pin-count through-hole package. A microcontroller is a programmable semiconductor containing a processor core, program memory, data memory, and peripherals on one integrated circuit. The Z8 family combines an 8-bit CPU architecture with resources suited to appliance controls, industrial controllers, and small production systems. The Z86E0412PEG belongs to the one-time-programmable segment of this family, providing a practical path to firmware development and low-volume manufacturing without requiring a user-programmed flash-memory interface. The principal specifications include a 12 MHz maximum operating frequency, 1 KB of OTP program memory organized as 1K x 8, 125 bytes of RAM, and 14 I/O lines. Its operating supply range is 4.5 V to 5.5 V, while the specified temperature range extends from -40°C to +105°C. The DIP-18 package supports conventional through-hole PCB assembly and is useful when socketed prototyping, manual service, or legacy manufacturing processes are preferred. Its one-time-programmable architecture allows application firmware to be permanently written during production, providing a field-programmable appearance during development without a costly external programming interface. This is especially useful for small embedded products where the firmware does not need to be changed after deployment. Because OTP memory cannot be erased, revision control and production programming procedures should be planned carefully before a product reaches manufacturing. Typical applications include temperature or level control, small actuator controllers, appliance interfaces, discrete sensor-conditioning systems, and simple embedded control panels. The 14 I/O count provides useful connectivity for switches, indicators, relays, and digital sensors, while the 125-byte RAM can hold variables and short-lived state. Designers should verify peripheral availability, interrupt requirements, and timing behavior against the manufacturer datasheet for each selected function. The main design consideration is programming and validation. Develop the firmware on the target Z8 architecture, test production programming in a repeatable fixture, and verify every programmed image before release. The 4.5 V to 5.5 V supply requirement also means that the power source and all attached I/O devices must remain within compatible voltage levels. A 5 V supply with suitable local decoupling is the straightforward baseline when designing around this controller. This product page combines the core Z86E0412PEG specifications, commercial sourcing guidance, package information, application guidance, and the available drop-in comparison. It is designed to help engineers identify the correct Z8 controller, plan programming and PCB assembly, and determine whether the directly replaceable Z86E0412PEC variant satisfies the project requirements.

詢價 聯絡我們
Z86E0412SEG - 8-Bit 12MHz 1KB OTP MCU | Zilog
Z86E0412SEG

Z86E0412SEG - 8-Bit 12MHz 1KB OTP MCU | Zilog

Zilog Z86E0412SEG is an 8-bit Z8 microcontroller with a 12 MHz clock, 1 KB of one-time-programmable memory, 14 I/O ports, and an 18-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for operation from -40°C to +105°C. The Z86E0412SEG combines a compact OTP MCU architecture with the Z8 family’s integrated peripherals and low-cost single-chip design. What is an 8-bit microcontroller? An 8-bit microcontroller is a programmable integrated circuit containing a central processing unit, nonvolatile program memory, data memory, and input/output peripherals on one chip. The Z86E0412SEG belongs to the Z8 family of MCUs, a semiconductor subtype of embedded controller. Its OTP program memory permits a device to be programmed once during manufacturing or prototype preparation, making it practical for cost-sensitive products with stable firmware. The principal characteristics include an 8-bit processor, 12 MHz operating speed, 1 KB of OTP memory organized as 1K × 8, and 14 I/O ports. Its 4.5 V to 5.5 V operating range accommodates conventional 5 V equipment, while the -40°C to +105°C rating supports industrial environments. The 18-pin SOIC-18, 300 mil package is also identified by some listings as an 18-pin plastic DIP-family package. Z86E0412SEG is a Zilog Z8 CISC controller intended for compact embedded-control tasks. One-time-programmable storage distinguishes it from field-reprogrammable Flash MCUs, eliminating the need for nonvolatile memory that can be updated after programming. The 14 I/O ports provide external control and monitoring points, while the 12 MHz clock supports time-dependent control, debouncing, signal sequencing, and communication tasks within the device’s stated limits. Typical applications include appliance controllers, small motor or relay-control boards, industrial interface modules, lighting controllers, instrumentation peripherals, and legacy equipment upgrades. Its combination of limited memory, 14 I/O ports, and a wide temperature range is well suited to simple control systems where the application does not require large firmware images or extensive connectivity. The OTP architecture is particularly appropriate when firmware will not change after deployment. Designers should verify oscillator configuration, pin multiplexing, and programming requirements against the Zilog datasheet before committing the PCB footprint. Because OTP memory cannot be rewritten, firmware validation and device programming must be complete before production programming. Decoupling should follow the manufacturer’s recommended power-network layout, and unused inputs should be configured to avoid unnecessary current consumption. This product page consolidates the Z86E0412SEG specifications, package information, family alternatives, and application-oriented design guidance. It also identifies the practical migration limits associated with one-time-programmable memory, helping engineers distinguish true family options from MCU replacements that require software and hardware requalification.

詢價 聯絡我們
Z86E0612PSG - 12MHz 8-Bit OTP MCU with 1KB | Zilog
Z86E0612PSG

Z86E0612PSG - 12MHz 8-Bit OTP MCU with 1KB | Zilog

The Zilog Z86E0612PSG is an 8-bit Z8 microcontroller with a 12 MHz maximum operating frequency, 1 KB of one-time-programmable program memory, and 125 bytes of RAM in an 18-pin plastic DIP package. The device includes SPI connectivity, a power-on reset, a watchdog timer, and 14 general-purpose I/O pins. Its 3 V to 5.5 V supply range supports both 3.3 V and 5 V embedded systems. An 8-bit microcontroller is a compact processor architecture intended for control-oriented products in which modest computational performance, deterministic peripheral access, and low system complexity are more important than high bandwidth. The Z8 family combines the processor core, nonvolatile program memory, RAM, I/O, timing functions, and serial communications in one integrated circuit, reducing the component count required for embedded control, appliance control, industrial interfaces, and compact consumer products. The Z86E0612PSG centers on a Z8 CPU operating at up to 12 MHz. Its 1 KB OTP program memory is intended for compact control code that can be programmed once during manufacturing. The 125-byte RAM provides working storage for variables, state machines, and communication buffers. Fourteen I/O pins allow the device to operate as the central controller for digital inputs, outputs, indicators, and external interface signals. Communication and system-control peripherals broaden the device beyond simple GPIO control. The integrated SPI interface supports synchronous serial communication with sensors, displays, memories, and other SPI-compatible peripherals. A power-on reset establishes a known startup state, while the watchdog timer helps recover operation after a software fault. Together, these resources make the MCU appropriate for compact products whose firmware must remain small and whose board area is constrained. Typical applications include appliance control, simple sensor-hub controllers, LED and display interfaces, industrial control modules, access-control equipment, and compact embedded products. The 12 MHz operating speed provides useful responsiveness for interrupt-driven control loops, while the 1 KB memory limit strongly favors event-driven firmware, state-machine architecture, and code reuse. The 18-pin DIP package also facilitates prototyping and straightforward through-hole assembly. PCB planning should preserve access to the SPI interface, I/O pins, reset behavior, and programming or test points. Because program memory is OTP, firmware validation and production programming must occur before the component reaches the end customer. Developers should also budget for decoupling close to the supply pins and verify all external serial-device logic levels against the 3 V to 5.5 V operating range. This page consolidates the Z86E0612PSG electrical identity, package details, drop-in replacement candidates, application guidance, and design considerations into an engineering-focused reference. It supports part selection and board planning while helping teams distinguish confirmed device characteristics from parameters that still require confirmation from the manufacturer datasheet.

詢價 聯絡我們
Z86E0612SSG - 8-Bit 12MHz 1KB OTP MCU | Zilog | Embedded Control
Z86E0612SSG

Z86E0612SSG - 8-Bit 12MHz 1KB OTP MCU | Zilog | Embedded Control

The Zilog Z86E0612SSG is an 8-bit Z8 microcontroller with a 12 MHz operating frequency, 1 KB of one-time-programmable program memory, and 124 bytes of RAM in an 18-pin SOIC package. It includes SPI connectivity, Power-On Reset, and a Watchdog Timer, making it suitable for compact embedded control, communication, and peripheral-control designs. An 8-bit microcontroller is a programmable semiconductor that integrates a central processing unit, memory, and peripherals into one device. The Z8 core follows the broader hierarchy of microcontroller, embedded processor, processor, and semiconductor. Compared with a general-purpose processor, this device targets smaller control systems where compact code and memory, deterministic peripheral control, and low system complexity are more important than application-processor performance. The Z86E0612SSG's principal features are its 12 MHz operating frequency, 1 KB OTP program memory, 124-byte RAM, SPI interface, Power-On Reset, and Watchdog Timer. The 1 KB OTP architecture suits final-production programs that do not require repeated field reprogramming. SPI provides a compact serial path for sensors, display controllers, memory devices, and other peripherals, while the Watchdog Timer supports recovery from unexpected program stalls. Its Z8 core is implemented as an 8-bit CISC microcontroller. Program execution, data storage, and peripheral interaction are integrated into one device, reducing the number of external components required for a small embedded controller. The 124-byte RAM provides working memory for variables and stack operations, while the OTP program memory imposes a fixed one-time programming constraint that should be considered before committing the device to a production design. Typical applications include small sensor-interface controllers, SPI peripheral hubs, industrial control modules, appliance control boards, and compact communication equipment. In these systems, the MCU can supervise a sensor or actuator, exchange data through SPI, and use its reset and watchdog functions to support stable operation after power application or a firmware fault. Design the power rail and signal paths around the manufacturer's electrical limits, and place the required bypass capacitors close to the supply pins. Because program memory is OTP, validate the complete firmware image and programming sequence during production testing. Confirm the exact pin functions, input thresholds, timing limits, and clock requirements in the Zilog manufacturer datasheet before releasing the PCB layout. This page consolidates the core Z86E0612SSG specifications, sourcing guidance, replacement considerations, and practical implementation notes into an engineering-focused resource that supports faster design review and production planning.

詢價 聯絡我們
Z86E0812PEG - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E0812PEG

Z86E0812PEG - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z86E0812PEG is an 8-bit Z8 microcontroller operating at up to 12 MHz, with 2 KB of one-time-programmable memory, 14 I/O ports, a 4.5 V to 5.5 V supply range, and an 18-pin PDIP package. It is designed for compact embedded-control systems requiring straightforward 8-bit processing, dedicated I/O, and firmware retention without a separate external memory device. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, I/O ports, and supporting peripherals on one integrated circuit. The Zilog Z8 family belongs to the broader embedded-controller hierarchy that includes microcontrollers, embedded processors, and semiconductors. Compared with a general-purpose processor, this device targets smaller control loops where cost, simplicity, deterministic peripheral access, and board area are more important than complex computation or high memory bandwidth. Key verified specifications include a 12 MHz maximum clock speed, 2 KB of OTP program memory, 14 I/O ports, and a 4.5 V to 5.5 V operating supply range. Its operating temperature spans -40°C to +105°C, making it suitable for industrial-temperature equipment when the associated system design and qualification requirements are satisfied. The RoHS designation identifies the part as compliant with the supplied RoHS listing, while other regulatory classifications remain unconfirmed in the available data. The device uses the Z8 architecture described in the available product listings as an eZ8 CISC microcontroller. One-time-programmable memory is intended for firmware that does not require later field rewriting, helping control production complexity when the final program is known before deployment. The 14 I/O pins provide interfaces for digital inputs, output control, or mixed peripheral functions, while the 18-pin PDIP format supports conventional through-hole assembly and prototyping. Typical applications include small industrial controllers, sensor-interface modules, building-control products, appliance-control boards, and compact embedded instruments. The 12 MHz clock is appropriate for moderate-speed digital sequencing, while the 14 available I/O ports can connect switches, indicators, relays, and discrete sensing components. Because the part has 2 KB of OTP rather than large RAM or Flash, firmware should be sized carefully and peripheral-heavy tasks delegated to dedicated devices when necessary. The primary design consideration is validating the exact pin assignments, oscillator requirements, reset behavior, and programming procedure against the official manufacturer documentation before layout release. Designers should also confirm current consumption and timing behavior for the selected external clock and operating conditions, because those values were not established by the supplied verification data. DIP packaging requires adequate insertion clearance, mechanical support, and protection from electrostatic discharge during handling. This product page consolidates verified distributor specifications, lifecycle information, package details, commercial availability links, and practical application guidance. It also distinguishes verified Zilog family drop-in options from unverified cross-brand replacements so engineers can make a sourcing decision without treating general cross-reference tools as proof of pin and firmware compatibility.

詢價 聯絡我們
Z86E0812SEG - 8-Bit 12MHz 2KB OTP MCU | Zilog
Z86E0812SEG

Z86E0812SEG - 8-Bit 12MHz 2KB OTP MCU | Zilog

The Zilog Z86E0812SEG is an 8-bit Z8 OTP microcontroller operating at 12 MHz with 2 KB of one-time-programmable program memory, 14 I/O ports, a 4.5 V to 5.5 V supply range, and an 18-pin SOIC package. It is intended for compact embedded-control products where economical one-time programming, deterministic peripheral control, and a small package are useful. The Z86E0812SEG is listed as active by the supplied datasheet listing and is positioned for low-volume, cost-sensitive controller designs. An OTP microcontroller is a single-chip embedded controller whose program memory is written once during manufacturing or provisioning. It belongs to the Z8 family and the broader microcontroller hierarchy that includes general-purpose MCUs, embedded controllers, ROM devices, and flash-memory devices. Unlike a flash MCU, the OTP architecture eliminates repeated in-circuit programming, which can simplify production tooling while fixing the installed firmware permanently. Applications must therefore treat programming as a manufacturing step rather than a field-update mechanism. The three principal selection parameters are the 12 MHz operating clock, 2 KB of OTP program memory, and 4.5 V to 5.5 V operating supply. The device also provides 14 I/O ports, making it suitable for compact products that read sensors, operate indicators, drive logic-level peripherals, and perform basic sequencing. Its 8-bit architecture and 18-pin SOIC form factor support space-constrained boards where a larger microcontroller package would be unnecessary. The Z8 family provides an established platform for embedded-control applications, but the supplied excerpts do not expose detailed timer, serial-interface, oscillator, or electrical-limit tables. The part should therefore be selected using the complete Zilog datasheet rather than inferred from the distributor summaries. In particular, engineers should confirm oscillator connection requirements, reset behavior, I/O drive limits, and programming procedure before committing a PCB or production fixture to this device. Typical uses include simple appliance controllers, building-control modules, industrial interface boards, LED sequencing systems, instrumentation front ends, and small motor or relay-control products. A 5 V supply keeps the device compatible with conventional embedded logic, while the limited 2 KB program memory favors compact control loops, state machines, and dedicated peripheral handling rather than general-purpose applications requiring extensive firmware storage. The primary design consideration is OTP irreversibility. Firmware must be thoroughly validated before programming because later corrections normally require a new programmed device rather than an in-circuit reflash. Board designers should also follow the datasheet's recommended bypass-capacitor and clock-network arrangements, and production engineers should build programming, test, and traceability steps into the manufacturing process. This page consolidates the verified distributor specifications, package information, sourcing links, alternative-family comparison, and practical OTP design considerations. It also distinguishes confirmed data from parameters that still require verification from the complete manufacturer datasheet, helping engineers make a defensible decision before committing the Z86E0812SEG to a design.

詢價 聯絡我們
Z86E1505PSC - 8-Bit 5MHz OTP Keyboard Controller | Zilog
Z86E1505PSC

Z86E1505PSC - 8-Bit 5MHz OTP Keyboard Controller | Zilog

The Zilog, Inc. Z86E1505PSC is an 8-bit Z8 keyboard-controller microcontroller operating at 5 MHz, with 4 KB of One-Time Programmable program memory, 188 bytes of RAM, and 32 programmable I/O pins in a 40-pin DIP package. The device also integrates programmable LED drivers, a Power-On Reset circuit, and a Watchdog Timer for compact and dependable keyboard-scanning designs. An OTP keyboard controller is a specialized microcontroller that scans switch inputs, applies debouncing and logic functions, drives indicator LEDs, and communicates with a host controller. It belongs to the hierarchy of 8-bit MCU, microcontroller, embedded controller, and semiconductor. The Z8 architecture combines straightforward firmware execution with dedicated keyboard-oriented peripherals, reducing external logic and simplifying layouts for wired or embedded human-interface devices. The principal advantages of the Z86E1505PSC are its 5 MHz operating speed, 4K by 8 OTP program-memory organization, 188-byte RAM, and 32 programmable I/O lines. OTP memory is suitable for products whose firmware is finalized before deployment because it cannot be electrically rewritten in the field. The Watchdog Timer and Power-On Reset support dependable recovery and controlled startup, while the integrated LED drivers reduce the component count needed for status indication. Externally, the device uses an external oscillator and provides the interface resources required for matrix-based keyboard scanning. Its 40-pin DIP package is easy to prototype, inspect, and service on through-hole industrial or educational assemblies. Unlike a general-purpose MCU that would require external LED drivers and additional reset support, this controller concentrates those functions in one device, allowing a smaller bill of materials and more direct keyboard firmware. Typical uses include computer keyboards, keypad readers, access-control panels, laboratory control panels, and compact industrial keypads. It is particularly appropriate when a fixed function can be programmed once, the application needs deterministic key scanning and status indication, and through-hole construction is preferred for maintainability. Its 188-byte RAM provides working space for scan state, debounce counters, communication buffers, and configuration variables. Designers should verify the oscillator requirements, key-scan architecture, and host-interface levels against the manufacturer datasheet before finalizing the PCB. Because program memory is one-time programmable, validate firmware and keyboard layouts thoroughly before production programming. Confirm all 40 package connections against the pin-description table rather than relying on general DIP numbering assumptions. This product overview combines the controller's core memory, timing, I/O, and package characteristics with practical guidance for keyboard hardware. It also distinguishes verified functions from details requiring confirmation, helping engineers plan sourcing, firmware validation, PCB routing, and production programming without overlooking the architectural limits of an OTP MCU.

詢價 聯絡我們
Z86E2112FSC - 8-Bit 12MHz OTP MCU with UART | Zilog
Z86E2112FSC

Z86E2112FSC - 8-Bit 12MHz OTP MCU with UART | Zilog

The Zilog Z86E2112FSC is an 8-bit Z8 microcontroller rated for operation up to 12 MHz, with 8 KB of one-time-programmable memory, 236 bytes of RAM, 32 I/O pins, and UART communications in a 44-pin LQFP package. It is designed for compact embedded-control tasks that require deterministic serial communication and a small, surface-mount footprint. An 8-bit microcontroller is an embedded-processing IC that integrates a processor core, nonvolatile program memory, data memory, I/O ports, and communication peripherals into one package. The Z86E2112FSC belongs to the Z8 family, where the MCU sits within the broader hierarchy of embedded controllers, semiconductor devices, and programmable control systems. Its one-time-programmable architecture allows application firmware to be permanently written into the device for production control. The Z86E2112FSC combines a 12 MHz maximum clock with 8 KB of OTP program memory and a hardware UART. The UART supports communications with host computers, sensors, human-interface modules, and other embedded controllers without requiring a separate serial-interface IC. The 32 I/O pins provide a practical interface capacity for logic inputs, output control, and external peripheral connections when the complete pin-assignment table and electrical limits are followed. This part operates from a nominal 5.00 V supply with a listed maximum of 5.50 V. That supply range makes a regulated 5 V rail the natural operating environment. Clock-sensitive and UART-connected circuits should use suitable bypassing, controlled rise times, and signal levels compatible with the device's documented electrical characteristics. Because its program memory is OTP rather than reprogrammable Flash, firmware changes require a new programmed device. Typical uses include compact serial controllers, appliance interfaces, industrial modules, instrumentation, lighting controls, and embedded communication equipment. The 44-pin LQFP package offers enough connections for mixed digital I/O and serial functions while remaining compatible with conventional surface-mount assembly. Designs must observe the manufacturer’s pin and electrical requirements when assigning multiplexing functions. For a new PCB, the most important design decision is preserving the exact 44-pin footprint and validating the selected oscillator, reset, supply, and UART implementation against the manufacturer datasheet. For an existing assembly, verify package suffix, temperature grade, supply voltage, firmware memory, and all peripheral assignments before considering substitution. This page combines the device’s core operating specifications with sourcing guidance, drop-in replacement analysis, package considerations, and application-oriented design notes. It is intended to help engineers determine whether the Z86E2112FSC matches the required memory, clock, I/O, serial-interface, supply, and package constraints without overlooking OTP-programming limitations.

詢價 聯絡我們
Z86E2116FSC - 16MHz 8KB OTP 8-Bit MCU | Zilog
Z86E2116FSC

Z86E2116FSC - 16MHz 8KB OTP 8-Bit MCU | Zilog

The Zilog Z86E2116FSC is an 8-bit Z8 CMOS OTP microcontroller operating at 16 MHz with 8 KB of one-time-programmable memory and UART capability, housed in a 44-pin QFP package. It combines a compact embedded-control footprint with dedicated serial communications, making it suitable for appliance controls, industrial interfaces, and compact embedded systems. An 8-bit microcontroller is a microprocessor optimized for embedded control tasks such as reading sensors, operating relays, driving displays, and managing communication peripherals. The Z86E2116FSC belongs to the Z8 family of CMOS application-specific controllers, where the CPU, memory, timers, I/O, and communication functions are integrated into one device. Its 8 KB OTP program memory supports a fixed application program, while its 16 MHz operating speed provides the timing required for common control-loop and serial-interface tasks. The principal features include an 8-bit processor core, 8 KB OTP program memory, 16 MHz clock operation, UART support, and a 44-pin QFP package. The UART allows the controller to exchange formatted serial data with sensors, programmers, modules, or supervisory electronics. OTP memory also gives a production design a stable, programmed configuration without an external writable program-memory component. Technical selection should focus on whether the required peripherals, voltage range, clock configuration, and interrupt architecture are sufficient for the target design. Because firmware is permanently programmed after device programming, prototype changes require a different programmed MCU rather than a routine field update. Engineers should also verify oscillator, reset, I/O, and serial-interface requirements against the manufacturer datasheet before schematic capture. Typical uses include compact appliance controllers, serial-interface modules, keypad and display products, industrial control boards, and embedded peripheral control. In these systems, the MCU can supervise inputs, execute control logic, and manage UART communication while keeping the footprint within a 44-pin surface-mount package. PCB design should preserve access to every programming and test signal, maintain adequate copper around ground and power pins, and follow the datasheet's recommended decoupling layout. Because OTP programming is a one-time manufacturing operation, production traceability and device marking should be designed into the process, while firmware changes should be accommodated by maintaining a replaceable MCU footprint. This product page consolidates the confirmed 8-bit, 16 MHz, 8 KB OTP, UART, and 44-QFP characteristics with package guidance, sourcing information, design notes, and a qualified comparison framework. It is intended to help engineers verify functionality and manufacturing readiness without treating a family member as a drop-in substitute without further engineering review.

詢價 聯絡我們
Z86E2116VSC - 8-Bit 16MHz OTP MCU with UART | Zilog
Z86E2116VSC

Z86E2116VSC - 8-Bit 16MHz OTP MCU with UART | Zilog

The Zilog Z86E2116VSC is an 8-bit Z8 CMOS microcontroller with a 16 MHz operating frequency, 8 KB of one-time-programmable memory, and UART capability in a 44-lead PLCC package. It combines an embedded 8-bit processor, 8K × 8 OTP program memory, and serial communications in a single integrated circuit designed for compact embedded control, appliance control, and simple communications equipment. An 8-bit microcontroller is a microprocessor integrated with memory, I/O, timers, and peripheral functions on one semiconductor die. The Z8 family belongs to the broader embedded-controller hierarchy: microcontroller, embedded processor, semiconductor, and electronic component. One-time-programmable memory is intended for production firmware that does not need revision after programming, allowing the finished controller to provide compact, dedicated control without external program-memory devices. The principal characteristics of the Z86E2116VSC include a maximum 16 MHz clock, 8 KB of OTP program memory organized as 8K × 8, an 8-bit data bus, and integrated UART communication. Its 44-lead PLCC package provides a surface-mount option for industrial and consumer assemblies. Because the programming technology is OTP rather than flash, firmware changes after manufacture generally require a new programmed device. The Z86E2116VSC uses Zilog's Z8 architecture, an 8-bit CMOS platform intended for cost-sensitive embedded products. Its relatively high 16 MHz clock supports time-sensitive control loops, while the dedicated UART supports serial communication with sensors, human-interface equipment, data converters, or other embedded controllers. The 8 KB code space is best suited to compact applications in which the firmware can fit within one program-memory block. Typical uses include appliance and appliance-control panels, simple serial interfaces, instrumentation, industrial modules, and compact consumer products. The UART makes the device appropriate for point-to-point supervisory communication, while the integrated OTP program memory is useful for dedicated firmware where field updates are unnecessary. System designers should also consider oscillator startup behavior, I/O drive requirements, and programming provisions before finalizing a PCB. A critical design consideration is the distinction between a drop-in replacement and a merely similar MCU. Pin compatibility, clocking, memory capacity, peripheral availability, interrupt behavior, and package dimensions must all be checked before substituting another device. The manufacturer datasheet pin table and device programming information should be used as the authority for PCB and firmware decisions. This product page consolidates the confirmed Z86E2116VSC specifications, package information, UART and OTP details, sourcing information, comparison dimensions, and practical design guidance into one engineering-oriented reference. It is intended to help designers determine whether this Z8 MCU fits the required memory, timing, package, and communication architecture before requesting a quotation.

詢價 聯絡我們
Z86E2204PSC - 8-Bit 8KB OTP CMOS Microcontroller | Zilog
Z86E2204PSC

Z86E2204PSC - 8-Bit 8KB OTP CMOS Microcontroller | Zilog

The Zilog, Inc. Z86E2204PSC is an 8-bit CMOS Z8 OTP microcontroller with 8 KB of one-time-programmable program memory in a 40-pin DIP package. It is designed for embedded control applications requiring compact logic integration, user-programmable nonvolatile storage, and a conventional through-hole footprint. An 8-bit microcontroller is a microprocessor optimized for embedded control rather than general-purpose computing. The Z8 OTP family combines a CPU core, programmable memory, digital I/O, timers, and communication resources on one integrated circuit. Because the program memory is one-time-programmable, the configured instruction sequence cannot normally be changed after programming, making the device suitable for dedicated products whose firmware is finalized during manufacturing. The Z86E2204PSC provides 8 KB of OTP program memory and operates as a CMOS microcontroller. Its 40-pin DIP package supports prototyping, repair, and applications where through-hole assembly is preferred over a compact surface-mount package. The device is listed as obsolete, so new designs should confirm lifecycle status and consider a supported MCU unless an existing product requires the exact function and footprint. The principal engineering consideration is the OTP programming model. Firmware must be validated before the device is programmed because later field changes are impossible. Designers should also assign every physical pin according to the manufacturer pin-description table, verify the programming interface, and ensure that unused inputs cannot float. Logic levels, oscillator requirements, and peripheral resources must be checked against the exact datasheet before schematic capture. Typical uses include appliance controllers, simple sequencers, dedicated interface modules, and legacy industrial equipment where a compact 8-bit control engine is sufficient. The MCU can also serve as a supervisory controller when its I/O count and embedded resources meet the product requirements. Since the part is obsolete and described as an 8 KB OTP device, it is most appropriate for maintenance, continuation, or exact-fit replication rather than new platform development without a qualified alternative. When laying out a board, preserve the 40-pin DIP footprint, provide adequate clearance for programming and soldering, and decouple supply pins near the device according to the manufacturer application guidance. Confirm startup behavior, oscillator limits, and I/O levels in hardware. For new designs, use the Request a Quote form on this page to ask about exact-fit availability and engineering support. This page consolidates lifecycle information, package details, programming constraints, application guidance, and verification steps for engineers maintaining legacy Z8-based equipment. It also highlights the practical difference between an exact legacy replacement and a modern MCU redesign.

詢價 聯絡我們
Z86E2304PSC - 8-Bit 4MHz OTP Keyboard MCU | Zilog
Z86E2304PSC

Z86E2304PSC - 8-Bit 4MHz OTP Keyboard MCU | Zilog

The Zilog Z86E2304PSC is an 8-bit Z8 keyboard-controller microcontroller with 8 KB of one-time-programmable memory, a 4 MHz operating frequency, and a 40-pin through-hole DIP package. It is designed for keyboard scanning, matrix-key decoding, and embedded human-interface applications. A keyboard-controller microcontroller is an embedded MCU optimized for scanning switch matrices and managing key events. The Z86E23 family combines an 8-bit processor core, OTP program storage, RAM, timers, and keyboard-control peripherals in one device. This places it in the broader hierarchy of embedded controller, 8-bit microcontroller, and semiconductor product categories. The Z86E2304PSC provides 8 KB of OTP program memory, 236 bytes of RAM, two programmable counter/timer blocks, and a 4 MHz clock. Its pin-compatible OTP architecture is based on the Z8614 and Z8602 keyboard-controller family, allowing designers to retain established keyboard layouts while using one-time-programmable devices for production control. The controller is intended for matrix keyboard implementations where firmware must detect pressed and released keys, debounce contacts, maintain rollover information, and report key events to a host or application processor. Its dedicated keyboard-control resources reduce the amount of external logic required in simple keyboard products. Typical uses include computer keyboards, security-keypads, industrial control panels, access terminals, point-of-sale equipment, and remote key-entry modules. The 40-pin DIP package also supports prototype boards, educational platforms, and legacy control systems where through-hole assembly and socketed parts are preferred. When laying out a board, preserve the Z8 keyboard-controller signal assignments and provide adequate decoupling close to the supply pins. Confirm the external clock, reset, matrix-scan, and host-interface connections against the manufacturer datasheet before fabricating a replacement PCB. This product page combines device specifications, package details, sourcing guidance, verified drop-in candidates, and practical keyboard-controller design notes to support component selection, PCB reuse, firmware planning, and production procurement.

詢價 聯絡我們
Z86E2304VSC - 8-Bit OTP Keyboard Controller | Zilog
Z86E2304VSC

Z86E2304VSC - 8-Bit OTP Keyboard Controller | Zilog

The Zilog Z86E2304VSC is an 8-bit Z8-family keyboard controller with 4 KB of one-time-programmable memory and a 4 MHz operating frequency. It is based on the Z86E23 family, which the Zilog datasheet describes as a pin-compatible OTP version of the Z8614 and Z8602 keyboard controllers. The device is intended for keyboard scanning, matrix-key decoding, and embedded human-interface applications. A keyboard controller is an embedded microcontroller optimized for scanning a switch matrix and converting key activity into a digital report for a host processor. Unlike a general-purpose MCU, the Z86E23 architecture integrates keyboard-specific functions so firmware can focus on debouncing, key mapping, and reporting. Its two on-chip counter/timers provide selectable operating modes for timing, delay generation, and event-related functions. Key characteristics include the 8-bit Z8 CPU core, 4 KB OTP program memory, and 4 MHz clock rating identified in distributor product listings. The OTP architecture is suited to products where programmed firmware is held permanently after programming, avoiding the need for external nonvolatile program memory. Because OTP memory cannot be electrically erased and reprogrammed, a suitable programming and validation flow must be established before production programming. Typical uses include computer keyboards, keypads, control panels, and other matrix-switch products. The controller's dedicated keyboard architecture can simplify scan handling while its counter/timer resources support debounce timing, repeat-rate control, indicator handling, and periodic host communication. Firmware and peripheral assignments should be confirmed against the pin-description table in the manufacturer datasheet before schematic capture. For new designs, verify supply continuity and programming method early because the Z8 OTP family is an established embedded-controller architecture. Confirm the exact lead count, pin assignments, operating-voltage limits, and programming connector requirements for the Z86E2304VSC rather than assuming that another Z86E-series controller has an identical peripheral map. This page organizes the documented Z86E2304VSC identity, memory and timing specifications, alternative Zilog variants, application guidance, and engineering considerations into a single design reference. Use the manufacturer datasheet as the authority for electrical limits, timing, programming, and final pin assignment.

詢價 聯絡我們
Z86E3016PEG - 8-Bit 16MHz 4KB OTP MCU | Zilog
Z86E3016PEG

Z86E3016PEG - 8-Bit 16MHz 4KB OTP MCU | Zilog

The Zilog Z86E3016PEG is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable memory in a 28-pin plastic dual-inline package. The verified product listings identify the device as the Z8 family member Z86E3016PEG and describe it as an 8-bit, 16 MHz microcontroller with 4K × 8 OTP program memory and UART capability. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The Z8 belongs to the 8-bit microcontroller hierarchy, where each CPU cycle operates on an 8-bit data word. Such devices are used to read inputs, execute embedded control logic, and operate outputs in products where a compact controller, deterministic behavior, and modest processing requirements are more important than high computational throughput. The Z86E3016PEG's principal verified characteristics are its 16 MHz operating frequency, 8-bit CPU architecture, 4 KB OTP memory, and 28-pin PDIP package. The Mouser listing characterizes the device as an 8-bit MCU with 8K OTP and UART support, while the DigiKey listing identifies 4 KB, expressed as 4K × 8. Because these distributor descriptions express the OTP organization differently, engineers should confirm the exact program-memory organization against the manufacturer datasheet before assigning firmware capacity. The Z8 architecture is suitable for embedded motor-control, appliance-control, industrial-control, and serial-interface designs where an 8-bit CPU and UART simplify the control system. OTP program memory provides a one-time programmable implementation medium for products whose firmware is finalized before deployment. A 28-pin PDIP package also supports conventional through-hole assembly, prototyping, and manual inspection rather than requiring a fine-pitch surface-mount process. Before finalizing a design, verify the device's exact pin assignments, electrical limits, oscillator options, I/O count, UART characteristics, current consumption, and timing requirements using the manufacturer datasheet. Those parameters are not fully present in the supplied distributor snippets and are therefore marked as needed rather than estimated. Confirm that the 16 MHz clock source and UART baud-rate requirements can be met by the selected oscillator and external support components. This page combines verified distributor specifications, package information, pricing evidence, and explicitly qualified replacement analysis for the Z86E3016PEG. It also distinguishes verified drop-in candidates from unsupported cross-package options, helping engineers evaluate procurement and redesign decisions without treating package similarity as proof of functional equivalence.

詢價 聯絡我們
Z86E3016PSG - 8-Bit 16MHz OTP MCU | Zilog
Z86E3016PSG

Z86E3016PSG - 8-Bit 16MHz OTP MCU | Zilog

Zilog Z86E3016PSG is an 8-bit Z8-family microcontroller with 16 MHz operating frequency, 4 KB of one-time-programmable program memory, 237 bytes of RAM, and 24 I/O pins in a 28-pin package. It is designed for cost-sensitive embedded-control applications that require simple programming, low-power wake-up behavior, and dedicated on-chip peripherals. A microcontroller is a programmable semiconductor that integrates a CPU, memory, I/O ports, timers, and support circuitry on one chip. The Z8 architecture belongs to the broader microcontroller and embedded-processor hierarchy. Compared with application-specific controllers, an OTP microcontroller offers a straightforward way to implement fixed control logic in appliances, security devices, HVAC equipment, and other compact electronic products. Verified device features include one-time-programmable memory, enhanced wake-up circuitry, programmable watchdog timers, and selectable low-noise EMI options. The 16 MHz operating speed provides processing headroom for simple digital control, while 24 I/O lines allow the device to connect to sensors, switches, indicators, and actuators. Two 8-bit timers support periodic events, timing delays, and basic event generation without requiring additional timing components. The 4 KB OTP program memory is organized as 4K by 8 bits, and the device includes 237 bytes of RAM for working data. OTP memory permits the final application firmware to be programmed once, making the controller well suited to production products whose control logic does not require field updates. This simplifies manufacturing compared with flash-programmable alternatives, but it also means a firmware revision generally requires a new programmed device rather than an in-system memory update. Typical uses include appliance controls, security-system peripherals, temperature and process-control equipment, HVAC modules, and compact industrial controllers. The 24 available I/O pins simplify designs that need multiple digital inputs and outputs, while the watchdog timer helps recover operation after faults or unexpected program flow. Enhanced wake-up circuitry supports low-power systems that must respond to external activity without maintaining continuous high activity. Designers should verify the exact package pinout, operating voltage, clock configuration, and programming procedure against the Zilog datasheet before layout. The provided search data confirms a 28-pin device but does not expose authoritative pin names or a complete manufacturer PDF URL, so those details remain marked as data needed rather than being inferred. Firmware and board design should also account for OTP programming limitations and the watchdog timeout behavior.

詢價 聯絡我們
Z86E3016SSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E3016SSG

Z86E3016SSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E3016SSG is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable program memory, 125 bytes of RAM, and 24 I/O lines in a 28-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for a 0°C to 70°C ambient-temperature range. A microcontroller is an integrated circuit that combines a processor core, nonvolatile program memory, working RAM, and peripherals on one semiconductor device. The Z86E3016SSG belongs to the Z8 family of 8-bit microcontrollers and provides a compact control platform for products that require deterministic digital control but do not need the processing power, memory, or peripheral complexity of a 32-bit embedded processor. Its one-time-programmable architecture is intended for production devices whose firmware does not need field reprogramming. The principal device characteristics include a 16 MHz clock, 4 KB OTP program memory organized as 4K by 8 bits, 125 bytes of RAM, and 24 general-purpose I/O lines. Integrated power-on reset and watchdog-timer functions support dependable startup and recovery behavior. The 28-pin surface-mount SOIC package supports conventional PCB assembly while providing enough I/O capacity for sensors, indicators, control inputs, and external logic. The Z8 processor architecture provides an 8-bit execution model optimized for control-oriented embedded systems. At 16 MHz, it offers substantially greater timing headroom than many simpler 8-bit controllers, while the compact instruction and memory architecture keeps firmware and peripheral integration straightforward. Programmable OTP options include an RC oscillator and EPROM protection, allowing the selected configuration to be fixed according to the product's operating requirements. Typical uses include appliance controllers, industrial control modules, security and access-control equipment, instrumentation peripherals, and small embedded control subsystems. In each case, the 24 available I/O lines and 125 bytes of RAM are important constraints. Designers should allocate RAM carefully for stacks, buffers, and intermediate state, while treating the 4 KB OTP capacity as the final firmware limit. The primary design consideration is that one-time-programmable memory cannot be changed after programming. Firmware validation, programming fixtures, and production traceability therefore must be completed before devices reach end users. PCB layouts should also follow the verified 28-SOIC footprint and provide the decoupling and clock circuitry required by the manufacturer datasheet. This page consolidates verified distributor specifications, sourcing links, family alternatives, and practical selection guidance. It also distinguishes documented device facts from pricing, lifecycle, and pin-level information that was not established by the supplied source data.

詢價 聯絡我們
Z86E3116PEG - 8-Bit 16MHz 2KB OTP MCU | Zilog
Z86E3116PEG

Z86E3116PEG - 8-Bit 16MHz 2KB OTP MCU | Zilog

The Zilog Z86E3116PEG is an 8-bit Z8 microcontroller with 2KB (2K x 8) of one-time programmable program memory, 125 bytes of RAM, 24 I/O lines, and a maximum operating frequency of 16MHz in a 28-DIP (0.600-inch, 15.24mm) package. Its specified operating-voltage range is 4.5V to 5.5V. An 8-bit microcontroller is a compact embedded-control IC used to execute firmware, read inputs, and control outputs in dedicated electronic systems. The Z86E3116PEG belongs to the microcontroller hierarchy, combining a Z8 processor core, program memory, RAM, digital I/O, and embedded timing functions. Its one-time-programmable architecture is intended for products where firmware is written during manufacturing and does not need to be updated in the field. Key device characteristics include 16MHz operation, 24 general-purpose I/O lines, 125 bytes of RAM, and programmable OTP options identified in the source data as RC oscillator, EPROM protection, auto latch disable, and permanent settings. Integrated features reported by the Microchip USA product listing include a power-on reset and watchdog timer, providing basic startup supervision and recovery support for embedded control firmware. The device uses a 5V-class supply range of 4.5V to 5.5V. Its 28-DIP package provides through-hole mounting and a 0.600-inch body width, making it appropriate for legacy-style control boards, industrial controllers, appliance controllers, and compact embedded systems assembled with conventional through-hole techniques. Because the available product information does not include the complete datasheet pin map, individual signal assignments cannot be reproduced safely here. Typical application roles include simple sequencing and logic control, switch and relay management, status-indicator control, small industrial equipment interfaces, and dedicated appliance controllers. In each case, firmware stored in the 2KB OTP program memory determines the control behavior, while the 24 I/O lines provide connections to external sensors, switches, and actuators. Designers should account for the 4.5V to 5.5V supply requirement, confirm that the board uses the 28-pin DIP footprint, and validate timing, oscillator, reset, and watchdog behavior against the manufacturer datasheet before production release. The available data identifies the oscillator as internal, but its frequency range and detailed configuration requirements are not stated. This page consolidates verified distributor specifications, current sourcing information, package details, application guidance, and explicit data gaps. It also distinguishes verified facts from unspecified parameters, helping engineers evaluate the Z86E3116PEG without mistaking generic cross-reference tools for evidence of a pin-compatible replacement.

詢價 聯絡我們
Z86E3116PSG - 16MHz 8-Bit Z8 MCU | Zilog
Z86E3116PSG

Z86E3116PSG - 16MHz 8-Bit Z8 MCU | Zilog

The Zilog Z86E3116PSG is an 8-bit Z8 microcontroller operating at 16 MHz, with 2 KB of one-time-programmable program memory, 125 bytes of RAM, and 24 general-purpose I/O pins. The device is packaged in a 28-pin DIP measuring 0.600 inches across the row spacing, or 15.24 mm. An 8-bit microcontroller is a compact embedded processor designed to execute control logic, monitor digital inputs, and operate peripherals using a relatively small instruction set and memory footprint. Within the embedded-control hierarchy, it belongs to the Z8 family of 8-bit microcontrollers and combines a CPU core, nonvolatile OTP program memory, RAM, timers, and general-purpose I/O in one integrated circuit. The Z86E3116PSG provides a 16 MHz operating frequency, a 2K x 8 OTP architecture, and 24 I/O pins. Its on-chip resources include two 8-bit timers, a power-on reset function, and a watchdog timer. OTP memory allows firmware to be programmed once during manufacturing or commissioning, making the device suitable for fixed-control products in which field updates are unnecessary. The Z8 architecture supports economical embedded-control designs while keeping the external component count relatively low. With 24 I/O pins, the device can directly interface with switches, indicators, relays, sensors, and discrete logic. Two timers support periodic tasks, input timing, debouncing, or basic event counting, while the watchdog timer provides a mechanism for recovering from unexpected program flow faults. Typical uses include appliance controls, small industrial controllers, building-control modules, simple sensor interfaces, LED and lighting controllers, and compact embedded products requiring a DIP footprint. The through-hole DIP package is particularly useful for prototypes, low-to-medium-volume products, and assemblies where socketed or manually inserted construction is preferred. Designers should verify each signal's electrical limits, oscillator requirements, programming method, and timing behavior against the manufacturer datasheet. Because OTP memory cannot be erased, firmware validation and manufacturing-programming controls are especially important. The 28-pin DIP footprint also requires adequate board space, connector accessibility, and mechanical clearance around the device. This page combines the Z86E3116PSG's principal memory, timing, I/O, and packaging characteristics with a focused drop-in alternative assessment, practical implementation guidance, and an application-oriented selection framework for compact Z8-based control designs.

詢價 聯絡我們
Z86E3116SEG - 8-Bit 16MHz 2KB OTP MCU | Zilog
Z86E3116SEG

Z86E3116SEG - 8-Bit 16MHz 2KB OTP MCU | Zilog

The Zilog Z86E3116SEG is an 8-bit Z8 CISC microcontroller with 2KB of one-time-programmable program memory, 125 bytes of RAM, 24 I/O lines, and a 16MHz maximum operating frequency, supplied in a 28-pin SOIC package. It operates from a 4.5V to 5.5V supply across a -40°C to +105°C temperature range. A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and supporting peripherals into one package. The Z86E3116SEG belongs to the Z8 family of 8-bit microcontrollers, a class commonly used for embedded control because it combines a compact instruction set, dedicated I/O, and low-cost single-power-supply operation. Its larger program and data memories distinguish it from basic 8-pin devices while retaining the straightforward architecture suited to appliance controls, interface logic, and compact embedded systems. Key features include 2KB of OTP program memory, 125 bytes of RAM, 24 I/O lines, and operation up to 16MHz. Programmable OTP options listed in the device data include an RC oscillator, EPROM protection, auto latch disable, and permanent disable. The 28-pin SOIC package is also available in tube packaging according to the verified distributor data, supporting conventional through-hole board assembly rather than a compact surface-mount land pattern. The device uses the Z8 CISC architecture and includes an internal oscillator option according to the published specification summary. Its 125-byte RAM supports protocol state, counters, status flags, and short working buffers, while the 2KB OTP program area provides fixed firmware storage after programming. Because OTP memory cannot be electrically rewritten, firmware changes normally require a new programmed device rather than an in-circuit update. Typical uses include temperature controllers, appliance user interfaces, simple motor-control logic, industrial panel controllers, and embedded peripheral interfaces. In these applications, the 24 available I/O lines can distribute digital signals while the 16MHz operating rate supports time-based control routines and serial communication handling. A designer should still budget memory for interrupts, protocol handling, and application logic. The primary design constraint is nonvolatile program flexibility: OTP programming makes Z86E3116SEG appropriate for production builds with stable firmware, while applications requiring field updates may prefer a flash-memory MCU. Board layouts must also respect the 28-pin SOIC footprint and provide the required 4.5V to 5.5V supply, decoupling, programming interface, and exposed I/O routing. This product page consolidates verified distributor specifications, package information, temperature limits, and drop-in comparison data, then adds practical guidance on OTP programming, power-supply design, PCB layout, and selection constraints that are not presented as a complete replacement for the manufacturer datasheet.

詢價 聯絡我們
Z86E3116SSG - 8-Bit 16MHz OTP MCU | Zilog
Z86E3116SSG

Z86E3116SSG - 8-Bit 16MHz OTP MCU | Zilog

The Zilog, Inc. Z86E3116SSG is an 8-bit Z8 microcontroller operating at up to 16 MHz, with 2 KB of one-time-programmable memory in a 28-pin SOIC package. It combines a compact embedded-control architecture with on-chip nonvolatile program storage for designs that do not require frequent firmware updates. The 28-pin surface-mount package provides dedicated I/O capacity while supporting compact control boards, household appliances, and dedicated embedded modules. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Z8 belongs to the microcontroller hierarchy within integrated circuits and embedded processing. The Z86E3116SSG uses one-time-programmable memory, meaning its final firmware is written during manufacturing or production and cannot be rewritten afterward. This is useful for stable products where field updates are unnecessary and security through write protection is desirable. The device's headline characteristics are an 8-bit CPU architecture, a 16 MHz operating frequency, and 2 KB of OTP program memory. Its 28-pin SOIC package is designed for conventional surface-mount assembly and provides a practical upgrade from larger through-hole controllers when board area is constrained. Because the target MPN is identified as a Z8 2K OTP device, it is suited to compact control logic rather than connectivity-heavy or high-memory embedded systems. Program memory size is the principal design boundary. A 2 KB OTP budget supports a compact state machine, supervisory routine, keypad controller, or simple peripheral-control firmware, but it requires disciplined code sizing and limits the amount of application logic, tables, and diagnostics that can be included. The 16 MHz clock provides the timing headroom needed for responsive control loops, scanning, and communication routines, provided the firmware is designed around the limited code storage. Typical applications include appliance control modules, small motor-control boards, illumination controllers, keypads, security accessories, and compact embedded control products. A designer should assign ports according to the datasheet pin description table and reserve the programming and reset-related pins required by the selected Z8 device functions. The 28-pin package also makes it practical to retain through-hole-style prototyping while moving to automated surface-mount production. The primary engineering consideration is validating the complete firmware image before OTP programming. Because OTP cannot be revised after programming, functional testing, boundary-condition checks, and production traceability become especially important. Verify the oscillator, reset behavior, port multiplexing, and any peripheral configuration against the manufacturer datasheet before releasing devices for programming. This page combines manufacturer-oriented device identification, verified distributor specifications, same-family drop-in candidates, and practical design guidance for teams evaluating the Z86E3116SSG as a compact 8-bit control solution.

詢價 聯絡我們