Z86E2304VSC - 8-Bit OTP Keyboard Controller | Zilog
MPN: Z86E2304VSC ✓ 啟用中Z86E2304VSC 概覽
A keyboard controller is an embedded microcontroller optimized for scanning a switch matrix and converting key activity into a digital report for a host processor. Unlike a general-purpose MCU, the Z86E23 architecture integrates keyboard-specific functions so firmware can focus on debouncing, key mapping, and reporting. Its two on-chip counter/timers provide selectable operating modes for timing, delay generation, and event-related functions.
Key characteristics include the 8-bit Z8 CPU core, 4 KB OTP program memory, and 4 MHz clock rating identified in distributor product listings. The OTP architecture is suited to products where programmed firmware is held permanently after programming, avoiding the need for external nonvolatile program memory. Because OTP memory cannot be electrically erased and reprogrammed, a suitable programming and validation flow must be established before production programming.
Typical uses include computer keyboards, keypads, control panels, and other matrix-switch products. The controller's dedicated keyboard architecture can simplify scan handling while its counter/timer resources support debounce timing, repeat-rate control, indicator handling, and periodic host communication. Firmware and peripheral assignments should be confirmed against the pin-description table in the manufacturer datasheet before schematic capture.
For new designs, verify supply continuity and programming method early because the Z8 OTP family is an established embedded-controller architecture. Confirm the exact lead count, pin assignments, operating-voltage limits, and programming connector requirements for the Z86E2304VSC rather than assuming that another Z86E-series controller has an identical peripheral map.
This page organizes the documented Z86E2304VSC identity, memory and timing specifications, alternative Zilog variants, application guidance, and engineering considerations into a single design reference. Use the manufacturer datasheet as the authority for electrical limits, timing, programming, and final pin assignment.
直接替換替代品,適用於 Z86E2304VSC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
Z86E2304VSC-UIS
✅ 直接替換📋 參考替代品(不在目錄中)
Z86E2304VSC-UIG
✅ 直接替換📋 參考替代品(不在目錄中)
Z86E2304VSC 最大額定值與電氣特性
| Product Type | 8-bit keyboard controller microcontroller |
| CPU Architecture | Z8 8-bit architecture |
| Program Memory | 4 KB OTP |
| 最大時脈頻率 | 4 MHz |
| Application Category | Keyboard controller |
| Counter/Timer Count | 2 |
| Counter/Timer Modes | Multiple user-selectable modes |
| Compatibility Reference | Pin-compatible OTP version of Z8614 and Z8602 keyboard controllers |
| Programming Technology | One-time programmable (OTP) |
| 封裝 | 28-lead SOIC |
| 安裝類型 | Surface mount |
| Automotive Qualification | Not stated |
Z86E2304VSC 28-lead soic 腳位配置指南
Z86E2304VSC(28-lead soic 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: Z86E2304VSC.
請參閱 資料表 以查看完整腳位配置。
典型應用
Z86E2304VSC 適用於 6 應用s: Computer Keyboard Controller, Compact Keypad and Control Panel, Matrix-Switch Security Panel, Point-of-Sale Data Entry Terminal, Industrial Panel Remote Controller, Programmable Function-Key Interface.
Computer Keyboard Controller
The Z86E2304VSC fits a dedicated matrix-keyboard controller because the Z86E23 architecture is based on the Z8614 and Z8602 keyboard controllers and includes two selectable-mode counter/timers. The 4 KB OTP area can hold the key map, debounce logic, repeat-rate handling, and host-reporting routine without external program memory. Its 4 MHz operating rate supports regular switch-matrix scanning, while OTP programming suits a keyboard whose firmware is finalized before volume production.
推薦
Compact Keypad and Control Panel
The Z86E2304VSC can serve as the scanning and reporting controller for a compact keypad, access-control panel, or equipment-control interface. Its dedicated keyboard-controller origin reduces the firmware burden associated with matrix scanning, and the two counter/timers support debounce timing, key repeat, indicator updates, and periodic reporting. The 4 KB OTP memory suits a fixed key map, while the 4 MHz clock provides useful margin for scanning and serial-output routines.
推薦
Matrix-Switch Security Panel
The Z86E2304VSC is applicable to matrix-based security keypads where scan timing and debounce must remain consistent under long service life. The Z8 keyboard-controller architecture is directly related to the Z8614 and Z8602, providing a documented path for familiarizing engineers with established keyboard-scan techniques. Its one-time-programmable 4 KB program memory is appropriate when the key map and reporting protocol are stable and only the final validated firmware image needs to be retained.
推薦
Point-of-Sale Data Entry Terminal
A point-of-sale terminal keypad can use the Z86E2304VSC for matrix scanning while a separate host processor handles broader transaction processing. The controller's dedicated keyboard functions, 4 KB OTP program area, and two timing counters provide enough resources for debounce, key-repeat control, and encoded key reporting. Its 4 MHz operation keeps routine scan and communication tasks responsive without requiring an external program-memory device.
推薦
Industrial Panel Remote Controller
The Z86E2304VSC is well matched to a small industrial panel that presents a fixed matrix of function keys and status indicators. Keyboard-controller hardware simplifies scan-loop implementation, and the two counter/timers can organize debounce delays, repeat timing, and periodic status-report tasks. The 4 KB OTP memory is suitable for a stable interface definition, but the industrial temperature requirement must be checked against the specific suffix and manufacturer operating limits.
推薦
Programmable Function-Key Interface
The Z86E2304VSC can implement a programmable function-key interface in an audio, test, or communications product. A matrix of buttons is scanned by the dedicated controller while timer resources manage debounce, rollover handling, and host updates. Because the program memory is OTP, the key map and interface behavior must be validated before programming; this architecture is most attractive when the completed product rarely requires firmware revision.
推薦
推薦產品摘要
工程參考資料,適用於 Z86E2304VSC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | Z86E2304VSC-UIS | Z86E2304VSC-UIG |
|---|---|---|---|
| Brand | Zilog | Zilog | Zilog |
| Package | 28-lead SOIC | 28-lead SOIC | 28-lead SOIC |
| CPU Architecture | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 |
| Program Memory | 4 KB OTP | 4 KB OTP | 4 KB OTP |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 4 MHz |
| Counter/Timer Count | 2 | 2 | 2 |
| Compatibility Reference | Pin-compatible OTP version of Z8614 and Z8602 | Z86E2304VSC family variant | Z86E2304VSC family variant |
| Programming Technology | One-time programmable | One-time programmable | One-time programmable |
主要差異化特點
- Documented OTP relationship with established keyboard controllers (對比Z8614)
- Dedicated keyboard-controller architecture with two timing resources (對比Z86E2304ASC)
- Compact 4 KB OTP and 4 MHz control solution (對比General-purpose 8-bit MCU)
設計說明
Treat OTP programming as a one-way manufacturing step. Confirm the complete key map, timing constants, communication protocol, and bootloader or test strategy before programming production devices. A single late firmware change can require replacement of already-programmed components, so an approved programming image and traceability procedure should be established during hardware validation.
Assign matrix rows and columns directly from the manufacturer pin-description table rather than inferring positions from another Z86E-series device. Keep keyboard traces short and away from noisy switching or motor-drive nodes, and route the controller supply and ground pins using the pin-assignment recommendations in the datasheet. Confirm the physical lead pitch and exposed-pad requirements against the selected package drawing.
Budget the operating-current and transient requirements using the manufacturer electrical-characteristics tables before finalizing the supply rail. Decoupling values, maximum input voltage, and startup behavior must come from the Z86E23 datasheet rather than generic MCU assumptions. Because keyboard controllers can be mounted near high-current interface circuitry, maintain a quiet supply reference and verify the rail under worst-case scan activity.
Use debounce and repeat timing that fit the mechanical switch characteristics rather than relying on a fixed delay copied from another keyboard design. The Z86E23 provides two counter/timers for this class of task, but their modes, width, and interaction with interrupts must be checked in the datasheet. Validate rapid multi-key entry, rollover handling, and communication timing across the intended temperature range.
合規資訊
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations appear in the distributor summaries. The product is an integrated microcontroller and is not presented as an AEC-Q100 automotive-qualified device.