Z86E2204PSC - 8-Bit 8KB OTP CMOS Microcontroller | Zilog
MPN: Z86E2204PSC ✗ 停產Z86E2204PSC 概覽
An 8-bit microcontroller is a microprocessor optimized for embedded control rather than general-purpose computing. The Z8 OTP family combines a CPU core, programmable memory, digital I/O, timers, and communication resources on one integrated circuit. Because the program memory is one-time-programmable, the configured instruction sequence cannot normally be changed after programming, making the device suitable for dedicated products whose firmware is finalized during manufacturing.
The Z86E2204PSC provides 8 KB of OTP program memory and operates as a CMOS microcontroller. Its 40-pin DIP package supports prototyping, repair, and applications where through-hole assembly is preferred over a compact surface-mount package. The device is listed as obsolete, so new designs should confirm lifecycle status and consider a supported MCU unless an existing product requires the exact function and footprint.
The principal engineering consideration is the OTP programming model. Firmware must be validated before the device is programmed because later field changes are impossible. Designers should also assign every physical pin according to the manufacturer pin-description table, verify the programming interface, and ensure that unused inputs cannot float. Logic levels, oscillator requirements, and peripheral resources must be checked against the exact datasheet before schematic capture.
Typical uses include appliance controllers, simple sequencers, dedicated interface modules, and legacy industrial equipment where a compact 8-bit control engine is sufficient. The MCU can also serve as a supervisory controller when its I/O count and embedded resources meet the product requirements. Since the part is obsolete and described as an 8 KB OTP device, it is most appropriate for maintenance, continuation, or exact-fit replication rather than new platform development without a qualified alternative.
When laying out a board, preserve the 40-pin DIP footprint, provide adequate clearance for programming and soldering, and decouple supply pins near the device according to the manufacturer application guidance. Confirm startup behavior, oscillator limits, and I/O levels in hardware. For new designs, use the Request a Quote form on this page to ask about exact-fit availability and engineering support.
This page consolidates lifecycle information, package details, programming constraints, application guidance, and verification steps for engineers maintaining legacy Z8-based equipment. It also highlights the practical difference between an exact legacy replacement and a modern MCU redesign.
直接替換替代品,適用於 Z86E2204PSC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品Z86E2204PSC 最大額定值與電氣特性
| Device Type | 8-bit CMOS Z8 OTP microcontroller |
| Program Memory | 8 KB OTP |
| Program Memory Type | One-time programmable, 1 program memory |
| 封裝 | 40-pin DIP |
| 腳位數 | 40 pins |
| 安裝類型 | Through-hole, 1 mounting type |
| CPU Architecture | 8-bit, 1 CPU architecture |
| Process Technology | CMOS, 1 process technology |
| 生命週期狀態 | Obsolete, 1 lifecycle status |
Z86E2204PSC 40-pin dip 腳位配置指南
Z86E2204PSC(40-pin dip 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: Z86E2204PSC.
請參閱 資料表 以查看完整腳位配置。
典型應用
Z86E2204PSC 適用於 6 應用s: Legacy Appliance Control, Industrial Sequencer, Dedicated Interface Module, Legacy Sensor Node, Product Continuation Controller, Specialized Control Module.
Legacy Appliance Control
The Z86E2204PSC can serve as the central controller in a legacy appliance when the original product uses an 8-bit Z8 control architecture and a 40-pin DIP footprint. Its 8 KB OTP program memory is sufficient for compact, fixed control logic covering operating states, timing, and discrete inputs. Because OTP firmware cannot normally be rewritten, the programming process must use a fully validated production image. Keep the established board layout to minimize mechanical and electrical redesign risk, and verify supply voltage, oscillator requirements, and I/O levels from the manufacturer datasheet before release.
推薦
Industrial Sequencer
A production sequencer built around the Z86E2204PSC can use its 8-bit processing core and 8 KB OTP memory for deterministic step control, interlocks, and actuator sequencing. The 40-pin DIP package simplifies repair and through-hole assembly in equipment where long product lifecycles make component continuity more important than miniaturization. Firmware must include safe-state behavior for power loss, invalid sensor conditions, and operator commands. Confirm timer and I/O capacity against the exact datasheet, since the product description alone does not establish peripheral counts or maximum operating frequency.
推薦
Dedicated Interface Module
The Z86E2204PSC is suitable for a compact legacy interface module that translates discrete signals into a controlled sequence or drives a specialized output pattern. Its 8 KB OTP program memory supports fixed protocol handling and state management without external program storage. The 40-pin DIP package can simplify panel wiring, prototyping, and field replacement when a surface-mount design is unnecessary. Engineers should assign unused pins carefully, provide stable oscillator and reset arrangements, and validate electrical compatibility with connected equipment before using the part in new safety-related equipment.
推薦
Legacy Sensor Node
The Z86E2204PSC can serve as the control element of an older sensor node when the device must match an established controller board and its firmware interface. The MCU can execute sampling sequencing, threshold logic, and output updates within the limits of its 8-bit architecture and 8 KB OTP program memory. Because the target is obsolete, use it primarily for continuity of an existing node rather than an expanded network rollout. Verify sensor signal levels, available I/O, oscillator configuration, and power-budget requirements from the manufacturer documentation before production use.
推薦
Product Continuation Controller
For an established product that cannot be redesigned, the Z86E2204PSC provides an exact continuation path when its original firmware and 40-pin DIP board interface must be retained. The 8 KB OTP memory supports a frozen production program, while the CMOS microcontroller architecture matches the original Z8 control platform. Continuity planning should include controlled OTP programming, production traceability, and a review of remaining inventory. Because the device is obsolete, do not introduce functional changes unless the complete firmware, timing, and electrical behavior are revalidated.
推薦
Specialized Control Module
The Z86E2204PSC can be integrated into a specialized module that requires repeatable logic, limited software updates, and a through-hole controller package. Its 8 KB OTP program memory is appropriate for fixed operation rather than remotely updatable firmware. A compact 40-pin DIP implementation may simplify inspection, manual replacement, and mixed through-hole assembly compared with a fine-pitch surface-mount controller. Before schematic approval, compare every pin assignment and operating condition with the manufacturer datasheet, particularly for supply sequencing, programming access, oscillator startup, and I/O loading.
推薦
推薦產品摘要
工程參考資料,適用於 Z86E2204PSC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 40-pin DIP |
| Brand | Zilog, Inc. |
| Device Type | 8-bit CMOS Z8 OTP microcontroller |
| Program Memory | 8 KB OTP |
| CPU Architecture | 8-bit |
| Mounting Type | Through-hole |
| Program Memory Type | One-time programmable |
| Lifecycle Status | Obsolete |
主要差異化特點
- Exact legacy architecture continuity (對比Generic 8-bit MCU redesign)
- Fixed production firmware model (對比Flash-memory microcontroller redesign)
- Serviceable through-hole construction (對比Fine-pitch surface-mount redesign)
設計說明
Do not treat OTP program memory as reusable flash. Finalize and validate the complete firmware image before production programming, and control the programming event with an approved process. If field updates are required, continue using the original device only when the product already has a documented programming and revision-control procedure; otherwise redesign around a supported controller.
Use the manufacturer package drawing and pin-description table when creating the 40-pin DIP footprint. Confirm pin 1 orientation, leave adequate soldering clearance, and avoid placing tall components where an OTP programming fixture or manual replacement tool must access the board. Maintain the original board's copper and decoupling arrangement when continuity is more important than miniaturization.
Validate supply voltage, startup behavior, and I/O levels against the exact Z86E2204PSC electrical tables before connecting external signals. Do not infer operating limits from the generic Z8 family. Place required bypass capacitance close to the relevant supply and ground pins using the layout shown in the manufacturer guidance, and confirm that the production supply tolerance remains inside the device requirements.
Estimate junction temperature from the actual supply voltage, I/O current, and ambient conditions rather than relying on a generic Z8 family value. Through-hole DIP construction assists heat conduction into the board, but copper area, enclosure temperature, and airflow still affect the operating margin. Use the manufacturer maximum junction and ambient ratings for the exact device when evaluating an enclosure.
合規資訊
The available product information does not establish the requested compliance attributes. The device is identified as obsolete, but lifecycle status alone does not prove RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.