產品(44,000+)

VSC7398XYU - 8-Port Gigabit Ethernet Switch | Microchip
VSC7398XYU

VSC7398XYU - 8-Port Gigabit Ethernet Switch | Microchip

Microchip Technology VSC7398XYU is an 8-port Gigabit Ethernet switch with integrated PHYs, providing eight tri-speed 10/100/1000 Mbps copper Ethernet ports in a 757-BGA (40x40 mm) package. The device is based on the SparX-G8e enhanced Gigabit Ethernet switching architecture and supports nonblocking wire-speed switching across eight ports. Its copper transceivers are IEEE 802.3ab compliant, allowing the switch to support Gigabit Ethernet links without requiring separate external PHY devices for each copper port. An Ethernet switch is a networking semiconductor that connects multiple Ethernet endpoints through a shared switching fabric. It inspects incoming Ethernet frames and forwards traffic toward the appropriate destination port, while also handling other Layer 2 functions implemented by the device. The VSC7398XYU sits in the hierarchy of Ethernet interface integrated circuits, network switches, interface ICs, semiconductors, and embedded networking equipment. Integrating the switch function and physical-layer transceivers into one device simplifies hardware design in gateways, industrial controllers, access equipment, and embedded network systems. The principal verified features are the eight integrated Gigabit Ethernet ports, support for 10, 100, and 1000 Mbps operation, nonblocking wire-speed performance, and IEEE 802.3ab-compliant copper transceivers. All eight ports support copper connectivity through integrated PHYs. This integration reduces the number of separate network interface devices required when several Ethernet connections must terminate on one circuit board. The exact switching fabric throughput, latency, SRAM organization, voltage ratings, and management-interface details are not included in the supplied verified data and therefore require confirmation from the manufacturer datasheet. The SparX-G8e implementation consolidates switching and transceiver functions within a single highly integrated mixed-signal network IC. This architecture is appropriate for equipment requiring multiple Ethernet ports but limited board space, such as compact access points, industrial communication controllers, and embedded gateways. Because the copper PHYs are integrated, board-level design must account for the device's thermal behavior, high-speed differential routing, magnetics or coupling requirements, controlled impedance, and layout practices specified by Microchip. The supplied data does not provide the complete reference design or pin-level electrical constraints, so those details should be obtained from the official documentation before schematic capture. Typical applications include eight-port industrial Ethernet switching, embedded control and test systems, telecom access equipment, industrial automation gateways, network appliances, and compact embedded communication platforms. The eight-port configuration is particularly useful when a system must connect controllers, sensors, service equipment, and supervisory computers through isolated Ethernet interfaces. Using a nonblocking, wire-speed switch allows traffic to be aggregated while avoiding the component count of eight standalone Ethernet interface devices. Designers should obtain the official VSC7398 product brief, datasheet, CAD models, and reference schematic before committing the 757-BGA footprint. The supplied distributor information identifies the package as 757-BGA (40x40), but no verified pinout, power-supply values, maximum copper-cable length, operating-temperature range, or recommended magnetics data were provided. Those parameters must be verified rather than inferred because the Ethernet PHYs, supply rails, clocking, and high-speed copper interfaces determine whether a particular board design will meet system requirements. This page consolidates the verified manufacturer and distributor findings for the VSC7398XYU, explicitly distinguishes confirmed specifications from missing data, and records the product's NRND status. It also provides engineering-focused application guidance and a source-traceable comparison framework. No unsupported drop-in alternatives, package substitutions, pricing values, pin assignments, or unverified performance claims are presented.

詢價 聯絡我們
VSC7410XMT - 6-Port Enterprise Ethernet Switch | Microchip
VSC7410XMT

VSC7410XMT - 6-Port Enterprise Ethernet Switch | Microchip

The Microchip Technology VSC7410XMT is a six-port enterprise Ethernet switch with two integrated copper PHYs, IEEE 1588v2 support, and a 324-ball PBGA package measuring 19 mm by 19 mm. It operates from a 0.95 V to 1.05 V core supply and draws approximately 1.3 A, making it a high-density switching solution for telecommunications, industrial, and enterprise networking equipment. An Ethernet switch is a semiconductor that forwards Ethernet frames between multiple network ports using hardware-based address lookup. It belongs to the network-interface hierarchy that includes Ethernet transceivers, network controllers, and interface ICs. By integrating switch functions and copper PHY resources on one device, the VSC7410XMT reduces the number of discrete components needed for a multiport networking platform while supporting precise timing applications. The principal features include six configurable switch ports, two integrated copper PHYs, and a core operating range of 0.95 V to 1.05 V. IEEE 1588v2 capability is especially relevant to synchronized networks, while the operating-temperature range of -40°C to 125°C supports industrial and telecommunications equipment. The device also provides a two-wire serial interface and JTAG for configuration, diagnostics, and board-level control. The VSC7410XMT is part of Microchip's Serval-T switch family and is positioned for market-ready enterprise-switch designs. Its 324-PBGA package concentrates substantial connectivity and switching resources into a 19 mm by 19 mm surface-mount footprint. Because the package contains many balls and requires controlled power and signal integrity, PCB layout should follow the manufacturer's pin assignment, reference-layout, and decoupling guidance exactly. Typical uses include enterprise Ethernet switching, telecommunications aggregation, industrial Ethernet equipment, and time-sensitive networked systems. The two integrated copper PHYs are useful where the board includes direct copper connections, while the remaining switch ports support broader network-interface configurations when paired with suitable external PHY or serializer resources. Power-system design is a critical implementation consideration because the specified 1.3 A current draw must be evaluated alongside the 0.95 V to 1.05 V supply range. Provide the required core and I/O supplies with low-impedance decoupling, and validate sequencing, thermal performance, and signal integrity on the final multilayer PCB before production release. This product page combines the manufacturer's device description with practical guidance on supply requirements, package handling, Ethernet applications, and qualification. Because the 324-ball assignment is complex and no verified pin table accompanies the available technical material, use the manufacturer datasheet for final ball mapping, electrical limits, and layout implementation.

詢價 聯絡我們
VSC7415XMT 6-Port Enterprise Switch | Microchip Technology
VSC7415XMT

VSC7415XMT 6-Port Enterprise Switch | Microchip Technology

The Microchip Technology VSC7415XMT is a Serval-T enterprise Ethernet switch IC with 6 ports and 2 integrated copper PHYs, supplied in a 324-BGA package measuring 19 x 19 mm. It is positioned as a high-performance, market-ready switching solution for IEEE 1588v2 synchronization applications. The integrated copper PHY capability reduces the amount of external copper transceiver circuitry required in enterprise networking equipment. An Ethernet switch IC is a semiconductor device that connects multiple network endpoints through integrated physical-layer and switching functions. It sits above the physical layer in the network hierarchy: copper PHY interfaces connect physical media, while the switch fabric forwards Ethernet traffic between ports. Enterprise switches use this integration to reduce board area, simplify signal routing, and support synchronization-sensitive infrastructure equipment. The VSC7415XMT's principal documented features are its 6-port configuration, 2 integrated Cu PHYs, Serval-T switch-family positioning, and support for IEEE 1588v2. The 19 x 19 mm, 324-ball BGA package provides a high pin count suitable for a complex multiport networking device, although its fine pitch requires careful PCB layout, inspection, and assembly controls. The device is suited to enterprise Ethernet switching, telecommunications access equipment, industrial network infrastructure, and other Ethernet systems where a compact multiport switching solution is valuable. Its integrated copper PHYs are especially relevant when the design requires direct copper-media connectivity without adding discrete PHY components alongside the switch controller. IEEE 1588v2 capability makes the VSC7415XMT relevant to systems requiring precise network timing and synchronization. Clock, power, signal-integrity, and thermal design must be evaluated together because high-speed BGA routing, PHY requirements, and synchronization accuracy can constrain the surrounding power-delivery network and board stack-up. This page combines the manufacturer product-page information, distributor listings, package identification, transaction guidance, and engineering selection considerations for engineers evaluating the VSC7415XMT. Before committing a layout, obtain the complete manufacturer datasheet and verify every pin, supply rail, interface requirement, and layout rule against the exact ordering code.

詢價 聯絡我們
VSC7416XKT-01 - 6-Port Carrier Ethernet Switch | Microchip
VSC7416XKT-01

VSC7416XKT-01 - 6-Port Carrier Ethernet Switch | Microchip

Microchip Technology VSC7416XKT-01 is a six-port Carrier Ethernet switch supporting 10 Mbps, 100 Mbps, and 1 Gbps Ethernet links in a 284-lead TQFP package measuring 24 x 24 mm. It is designed for telecommunications infrastructure equipment that requires multiple copper Ethernet ports, Layer-2 switching, and carrier-grade network functionality. The manufacturer lists the VSC7416 family as End of Life, so engineers should confirm availability and migration requirements before starting a new design. A Carrier Ethernet switch is a specialized Ethernet interface integrated into access, aggregation, and transport equipment. Unlike a general-purpose desktop Ethernet switch, a carrier-grade device is selected for telecommunications packaging, port density, network-management requirements, and compatibility with service-provider transport functions. Within the equipment hierarchy, the VSC7416XKT-01 sits between Line Cards and carrier Ethernet ports, converting electrical network traffic into a multiport switching resource for telecommunications systems. The primary feature set includes six ports, 10/100/1000-Mbps operation, and a 284-pin TQFP package. Its high pin count supports the extensive connections required by a carrier Ethernet switching function, including network interfaces, control, power, configuration, and support circuitry. Because the package is physically large, designers must preserve adequate copper area and follow the manufacturer's land pattern and thermal recommendations during PCB layout. This component belongs to Microchip's VSC7416 product family, identified on the manufacturer page as a six-port Carrier Ethernet switch. The related documentation search identifies the family as a Layer-2 Carrier Ethernet platform with MPLS/MPLS-TP support and VeriTime. These functions place the device at the network-forwarding layer, where traffic is handled according to Layer-2 information rather than being treated as a simple physical interface. The exact enabled feature set for each board design should be checked against the applicable configuration and software documentation. Typical uses include telecommunications line cards, access-node equipment, Ethernet aggregation systems, industrial network gateways, and carrier Ethernet test equipment. The six-port arrangement can reduce the number of discrete switching devices required on a board while supporting a mix of 10-Mbps, 100-Mbps, and 1-Gbps links. It is most appropriate when a system needs carrier-oriented Layer-2 switching in a substantial multi-pin package rather than a compact two-port or four-port Ethernet controller. A principal design consideration is lifecycle management. The VSC7416 family is marked End of Life, making the VSC7416XKT-01 appropriate for maintaining an existing qualified design rather than treating it as the default choice for a new platform. Confirm pin assignment, signal timing, power sequencing, thermal performance, and software support using the manufacturer datasheet before schematic capture or PCB release. This product record combines the exact package and Ethernet characteristics, lifecycle status, sourcing information, design guidance, and a conservative replacement assessment. It distinguishes verified drop-in interchangeability from merely similar Ethernet devices, helping engineers identify whether a redesign, firmware adjustment, or qualified alternate device is required before procurement.

詢價 聯絡我們
VSC7418XKT-01 - 11-Port Carrier Ethernet Switch | Microchip
VSC7418XKT-01

VSC7418XKT-01 - 11-Port Carrier Ethernet Switch | Microchip

Microchip Technology VSC7418XKT-01 is an 11-port, Layer-2 Carrier Ethernet switch designed for telecommunications and embedded networking systems. The device is supplied in a 284-TQFP package measuring 24 mm by 24 mm and is the orderable -01 version of the VSC7418 family. Its SGMII-oriented Carrier Ethernet architecture supports switching of multiple network-facing ports within compact telecommunications equipment. A Carrier Ethernet switch is a network-interface integrated circuit that forwards Ethernet frames between multiple ports while supporting carrier-grade transport requirements. In the product hierarchy, the VSC7418XKT-01 is a switch IC, then a network interface IC, then an integrated circuit and semiconductor. Its 11-port configuration allows one communications system to consolidate several Ethernet-facing connections without using a separate physical switch for every port. The principal documented feature of this ordered device is its 11-port Layer-2 SGMII Carrier Ethernet implementation. The -01 ordering designation identifies the part covered by the VSC7418-01 datasheet, while the 284-pin TQFP body provides a large, high-pin-count implementation capable of exposing numerous serial network, control, clock, power, and status connections. The 24 mm by 24 mm package is intended for surface-mount PCB assembly rather than manual socket installation. The VSC7418 is identified by Microchip as an End of Life device, making lifecycle planning essential for projects using it. New production should therefore begin with an availability and lifecycle review rather than assuming that an existing inventory position can be replenished indefinitely. The VSC7418XKT-01 suffix also includes an -01 revision and TQFP packaging information that must be retained when comparing documentation or replacement candidates. Typical deployment environments include telecommunications access equipment, Carrier Ethernet aggregation systems, industrial Ethernet equipment, and other network infrastructure that requires a multiport Layer-2 switch. In these systems, the switch IC can organize traffic among service-facing ports while the surrounding board supplies power, clocking, PHY or optical modules, magnetic interfaces, and management circuitry. PCB planning requires care because a 284-pin TQFP has a much larger footprint and more escape routes than a conventional small-outline package. Designers should follow the manufacturer land pattern, maintain high-speed trace geometry, provide local decoupling and reference-clock conditioning, and keep copper-return paths continuous. This page consolidates the confirmed product identity, lifecycle status, package information, sourcing workflow, and engineering considerations relevant to the VSC7418XKT-01.

詢價 聯絡我們
VSC7422XJG-04 - 25-Port GbE Switch, 12 Cu PHY | Microchip
VSC7422XJG-04

VSC7422XJG-04 - 25-Port GbE Switch, 12 Cu PHY | Microchip

The Microchip VSC7422XJG-04 is a fully integrated 25-port Gigabit Ethernet (GE) Layer-2 switch with 12 integrated copper PHYs in a single 672-HSBGA (27x27 mm) package, designed for industrial-temperature networking equipment. According to the manufacturer datasheet, this device operates from a 1V supply and combines 12 triple-speed (10/100/1000 Mbps) copper PHYs with up to 25 SerDes/SGMII/QSGMII-capable ports, delivering the industry's first single-chip 25-port GE switch solution. An Ethernet switch IC such as the VSC7422 sits at the heart of managed and unmanaged enterprise, industrial, and small-business networking gear. As a Layer-2 switch, it forwards Ethernet frames at wire speed, enforces VLAN/QoS policies, learns and ages MAC addresses, and provides traffic-class prioritization. Within the broader component taxonomy, the VSC7422XJG-04 is an integrated Ethernet switch IC, a sub-category of interface ICs, descended from telecom and networking ASICs and ultimately from general-purpose digital semiconductors. Key features include industrial-grade -40C to +85C operation, 12 integrated 10/100/1000BASE-T copper transceivers eliminating the need for an external PHY bank, support for 1G/2.5G SerDes plus SGMII/QSGMII mac interfaces on remaining ports, and a flexible unmanaged-L2 feature set. Combined with a companion device such as the VSC8512 (a 12-port copper PHY from the same Microchip SparX-IV family), designers can build a 25-port switch using only two ICs, shrinking BOM cost and PCB area versus discrete-architectures. Architecturally, the VSC7422XJG-04 integrates an L2 forwarding engine, dedicated per-port packet buffers, on-chip termination, and a SERDES physical layer. The device is targeted at designs that need a moderate-to-high port count, unmanaged or lightly-managed switching, and industrial-environment ruggedness without the cost of enterprise-grade managed switches. Typical applications include industrial Ethernet switches, factory-floor networking equipment, IP-surveillance back-haul switches, smart-grid gateways, and small-business / SMB unmanaged switches. For designs requiring 2.5G uplinks, the SERDES lanes can be wired to external PHY or interconnect devices. The 672-HSBGA package demands careful PCB layout: a 4-layer minimum stack-up with an unbroken GND/VDD power island under the exposed die is required to meet IEEE 802.3 return-loss and emission targets. When laying out a VSC7422XJG-04 PCB, design engineers should observe controlled-impedance routing on all copper traces (100-ohm differential for MDI pairs; 50-ohm single-ended for SERDES), maintain at least 200-mil separation between analog/digital grounds unless joined at a single ferrite, and provide sufficient thermal vias under the 672-HSBGA to keep junction temperature within margin when driving all 12 copper ports simultaneously. This page synthesizes distributor pricing, drop-in alternatives, and practical PCB/thermal design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
VSC7422XJQ-02 - 25-Port Gigabit Ethernet Switch | Microchip
VSC7422XJQ-02

VSC7422XJQ-02 - 25-Port Gigabit Ethernet Switch | Microchip

The Microchip Technology VSC7422XJQ-02 is a fully integrated 25-port Gigabit Ethernet switch with 12 copper PHYs in a 302-pin TQFP package. It combines Layer 2 switching, 12 integrated 1000BASE-T copper interfaces, and high-speed uplink connectivity in one network-interface IC. The device belongs to the SparX-III-25um switching family and is designed for telecom, industrial, and embedded Ethernet systems requiring a high port count without a collection of separate PHY devices. A Gigabit Ethernet switch is a semiconductor that receives Ethernet frames on multiple ports, inspects destination addresses, and forwards traffic toward the appropriate attached device. Within the network-equipment hierarchy, the VSC7422XJQ-02 sits between a network processor or system controller and physical copper links. As a Layer 2 switch, it provides the physical and data-plane foundation for Ethernet aggregation, access equipment, industrial gateways, and carrier-facing terminal systems. The principal integration advantage is the combination of 25 switch ports and 12 copper PHYs in one package. According to the manufacturer datasheet family, pairing the VSC7422 with a VSC8512 or VSC8522 12-port PHY can produce a 25-port switching solution using only two ICs. This approach reduces board area compared with a design assembled from many discrete Ethernet PHYs, while preserving the familiar Layer 2 forwarding function across copper and uplink connections. The -02 ordering code is associated with the VSC7422-02 datasheet family, which covers the VSC7420-02, VSC7421-02, and VSC7422-02 Gigabit Ethernet switches. The target device is supplied in a 302-TQFP, 24 mm by 24 mm package according to distributor product records. Its large lead count supports the extensive combination of switch ports, SerDes interfaces, copper PHY circuitry, reference clocks, power rails, management signals, and configuration pins required by a carrier-grade multiport Ethernet device. Typical deployments include telecommunications access equipment, industrial Ethernet aggregation, network-interface appliances, and embedded systems that need many Gigabit Ethernet connections. A companion PHY such as the VSC8512 can extend the number of copper ports, while the switching device handles frame forwarding between the integrated PHYs, additional PHY ports, and uplink links. The design must account for high-speed differential routing, controlled clocking, uninterrupted power delivery, thermal performance, and Ethernet magnetics requirements. The principal engineering trade-off is package complexity. A 302-pin TQFP offers extensive connectivity in a surface-mount format, but every assigned signal must be mapped carefully because there are many high-speed and power pins. Follow the pin-description table and recommended reference layout in the manufacturer datasheet rather than relying on a generic 302-pin symbol. Decoupling, return paths, clock-source placement, and copper-impedance control are especially important when integrating this switch into a multilayer PCB. This product overview combines the verified manufacturer family description, package information, architecture, application context, and practical PCB considerations. It also distinguishes the confirmed operating characteristics from detailed electrical parameters that must be taken directly from the official VSC7422-02 datasheet before release to production.

詢價 聯絡我們
VSC7422XJQ-04 - 25-Port Gigabit Ethernet Switch | Microchip
VSC7422XJQ-04

VSC7422XJQ-04 - 25-Port Gigabit Ethernet Switch | Microchip

The Microchip Technology VSC7422XJQ-04 is a Layer 2 Gigabit Ethernet switch with 25 ports and 12 integrated copper PHYs, housed in a 302-TQFP package measuring 24 x 24 mm. It combines a 25-port managed switch with 12 integrated 10/100/1000Base-T copper PHYs in a single package, reducing the component count and board complexity of a multi-port Ethernet aggregation design. The device is positioned for telecom, industrial, and equipment-level networking applications that require multiple copper Ethernet ports on one controller. An Ethernet switch is a Layer 2 network device that receives Ethernet frames on one port, examines the destination MAC address, and forwards traffic through the appropriate output port. A managed Layer 2 switch adds configuration, monitoring, and traffic-control functions that a basic unmanaged switch does not provide. The VSC7422 combines switching and copper physical-layer functions, allowing twelve copper links to share the same switching silicon while additional interfaces connect the device to upstream processors, PHYs, or network equipment. According to the Microchip VSC7422 product page, the device is the industry's first fully integrated 25-port Gigabit Ethernet switch with 12 copper PHYs in one package. That integration is the defining feature: designers can use one switching IC for twelve copper ports and connect additional ports through external PHYs. Microchip also identifies the VSC8512 as a companion 12-port PHY, enabling a 25-port copper design with only two main ICs when that companion device is used for the remaining interfaces. The VSC7422XJQ-04 is identified in distributor listings as a telecom Ethernet switch with a 302-TQFP package. The large lead count accommodates the integrated copper interfaces, control signals, power rails, and management connectivity in a single surface-mount device. Its footprint is materially larger than a typical low-port Ethernet controller, so PCB area, via density, thermal performance, and assembly capability should be considered before layout begins. Typical deployments include telecom access equipment, industrial Ethernet gateways, network appliances, and managed copper switching platforms. The integrated copper PHYs reduce board-level PHY count, while the Layer 2 switching function consolidates multiple Ethernet links around a single control point. Compared with a board assembled from discrete switching and PHY devices, the integrated approach can shorten copper routing, simplify assembly, and reduce component-inventory complexity. Design the power and thermal plan around the full 302-pin footprint rather than a small Ethernet controller land pattern. Follow the manufacturer layout guidance for high-speed copper pairs, provide clean supply rails and local decoupling, and validate the magnetics and connector interface for the target cable length and isolation requirements. Use the pin-description table and recommended schematic in the manufacturer datasheet when assigning every signal and supplying the exposed thermal and power connections. This page consolidates the manufacturer architecture description, distributor package identification, drop-in replacement information, and board-level design guidance into one engineering-focused reference for the VSC7422XJQ-04.

詢價 聯絡我們
VSC7424XJG-12 - 10-Port Gigabit Ethernet Switch | Microchip
VSC7424XJG-12

VSC7424XJG-12 - 10-Port Gigabit Ethernet Switch | Microchip

The Microchip VSC7424XJG-12 is a 10-port managed Layer 2 Gigabit Ethernet switch with eight integrated copper PHYs, supplied in a 672-ball HSBGA package measuring 27 mm by 27 mm. The device is based on the SparX-III-10 family and uses Microchip's 65 nm SimpliPHY technology to integrate copper Ethernet connectivity and switching functions in one package. A serial host interface provides configuration and control access for managed network equipment. A Gigabit Ethernet switch is a network-semiconductor device that receives Ethernet frames on multiple ports and forwards them according to Layer 2 addresses. An integrated copper PHY combines digital Ethernet framing with the physical-layer circuitry required to communicate over twisted-pair cabling. By integrating eight copper PHYs into the switching device, the VSC7424XJG-12 reduces the number of separate physical-layer components required in a multiport network design while retaining centralized packet forwarding and management. The VSC7424 family's defining features include its 10-port configuration, eight integrated copper PHYs, and 65 nm SimpliPHY implementation. Microchip describes the device as a highly integrated and power-conscious option for managed Ethernet switching. The SparX-III-10 designation identifies the switching platform used in the part, while the 672-HSBGA package supports the substantial ball count required for integrated high-speed Ethernet I/O, power delivery, ground connections, and control signals. The device is positioned for equipment that requires several copper Gigabit Ethernet connections in a limited board area. Relevant implementation considerations include careful high-speed layer-transition routing, controlled-length Ethernet differential pairs, solid return-path construction, decoupling close to supply pins, and compliance testing across all ten ports. Because the package is not a standard small-outline package, PCB designers should use the manufacturer's land pattern and pin-assignment documentation rather than infer dimensions from a generic HSBGA drawing. Typical end uses include industrial Ethernet switches, network-interface appliances, embedded communications equipment, access systems, and other managed infrastructure products requiring multiple Gigabit Ethernet ports. For these systems, the integrated copper PHYs can simplify board partitioning, while the serial management interface supports configuration by an embedded host. The trade-off is a large, high-pin-count BGA package whose assembly, inspection, and prototype rework demands are greater than those of a leaded or small-outline switch. This product page consolidates the manufacturer-defined port count, PHY integration, process technology, package, interface, and compliance attributes with application guidance and a clearly scoped replacement analysis. It also distinguishes orderable variants by the electrical details that must be confirmed in the hardware design rather than treating package similarity alone as proof of pin-compatible interchangeability.

詢價 聯絡我們
VSC7427XJG-12 - 26-Port Gigabit Ethernet Switch | Microchip
VSC7427XJG-12

VSC7427XJG-12 - 26-Port Gigabit Ethernet Switch | Microchip

The Microchip Technology VSC7427XJG-12 is a fully integrated 26-port Gigabit Ethernet switch with 12 copper PHYs in a single 672-HSBGA package measuring 27 x 27 mm. It combines 14 SerDes ports with 12 integrated 10/100/1000BASE-T copper PHY ports, allowing a complete Layer 2 switching system to be designed with fewer external components. The device is based on Microsemi's SimpliPHY technology and is intended for telecommunications, industrial, enterprise, and carrier-grade Ethernet equipment. An Ethernet switch is a semiconductor that connects multiple network endpoints by forwarding Ethernet frames between ports according to MAC-address tables. A Gigabit Ethernet switch supports data rates up to 1 Gb/s per active port. By integrating 12 copper PHYs and 14 SerDes interfaces into one package, the VSC7427 reduces board area, interface complexity, and the number of external PHY components required for a multiport network system. The principal feature of the VSC7427 is its combination of 26 logical ports, 12 integrated copper PHYs, and 14 SerDes interfaces. In conjunction with the Microsemi VSC8512 or VSC8522 12-port PHY, it can form a 26-port Gigabit Ethernet design using two integrated circuits. Its 65 nm SimpliPHY implementation is positioned as a low-power, cost-effective architecture for high-port-count Ethernet systems. The -12 ordering code identifies the exact Microchip catalog variant, while the family designation VSC7427 identifies the SparX-III-26 switching platform. The 672-HSBGA package is designed for surface-mount assembly and is supplied in trays according to the product listing. Its 27 x 27 mm footprint demands careful ball-escape planning, multilayer PCB construction, thermal via arrays, and high-density escape routing. Because the device combines high-speed SerDes interfaces, integrated copper PHYs, and a large switching die, the power, ground, clock, and signal-integrity layout must follow the manufacturer's reference design rather than be treated as a generic BGA layout. Typical uses include access switches, industrial Ethernet gateways, telecom aggregation equipment, storage networks, and embedded network appliances. The integrated copper PHYs reduce system complexity when most deployed endpoints use electrical Ethernet rather than optical fiber. SerDes ports can connect to optical PHYs, backplanes, or additional switching silicon when a design requires fiber uplinks or greater port density. A key design trade-off is package complexity. Integrating 12 PHYs into the switch package simplifies the board-level Ethernet interface, but the 672-ball BGA requires careful escape routing and inspection. Use the Microchip VSC7427 product brief and evaluation-platform documentation for reference layouts, clock requirements, power sequencing, media-dependent interface behavior, and thermal design. This page consolidates the confirmed family specifications, package information, sourcing guidance, and practical implementation considerations into one engineering-focused reference.

詢價 聯絡我們
VSC7430XMT - 6-Port Carrier Ethernet Switch | Microchip
VSC7430XMT

VSC7430XMT - 6-Port Carrier Ethernet Switch | Microchip

The Microchip Technology VSC7430XMT is a 6-port Carrier Ethernet switch with two integrated copper PHYs, 2.5 Gbps Ethernet switching capability, and a 324-pin PBGA package measuring 19 mm by 19 mm. It is designed for Carrier Ethernet edge demarcation and access equipment supporting MEF CE 2.0 service delivery. A Carrier Ethernet switch is a dedicated Ethernet switching semiconductor used to aggregate, classify, and forward traffic in telecommunications access networks. Unlike a general-purpose desktop Ethernet switch, a Carrier Ethernet switch is positioned for managed service-provider infrastructure, including service demarcation, mobile backhaul, and enterprise-access systems. The VSC7430 belongs to the broader hierarchy of Ethernet switch → network interface controller → networking semiconductor → integrated circuit. The principal features of the VSC7430XMT include six ports, two integrated Cu PHYs, and 2.5 Gbps switching performance. Its integrated copper PHYs reduce the external component count associated with copper physical-layer implementation, while the six-port architecture supports aggregation and demarcation functions in compact telecommunications equipment. The manufacturer describes the device as a market-ready solution for MEF CE 2.0 service delivery. The 324-PBGA package is a major thermal and routing consideration for high-speed network equipment. A 19 mm by 19 mm land pattern provides ample routing area, but it requires careful layer-transition planning, controlled impedance, power-plane integrity, and adequate thermal dissipation. Because the package has many connections and mixed signal paths, PCB stack-up and component placement can materially affect signal integrity and system reliability. Typical uses include IP edge demarcation platforms, Carrier Ethernet access equipment, enterprise service delivery, and mobile backhaul systems. In these applications, the switch consolidates several Ethernet-facing ports while providing a single switching platform for service handoff. Two integrated Cu PHYs are particularly useful where the system needs direct copper connectivity without a separate physical-layer device for every port. Designers should use the manufacturer datasheet for the authoritative pinout, power rails, clock requirements, reference-design connections, and exposed-pad implementation. Preserve the recommended high-speed trace geometry, provide decoupling close to supply pins, and validate the complete stack-up with the required Ethernet channel and compliance tests before production release. This page consolidates the confirmed VSC7430XMT product identity, package information, switching configuration, sourcing links, and practical implementation guidance. It also distinguishes documented drop-in substitutions from broader functional Ethernet-switch alternatives, helping engineers make package- and pin-compatible decisions rather than treating every competitor switch as interchangeable.

詢價 聯絡我們
VSC7435XMT - 6-Port Carrier Ethernet Switch | Microchip
VSC7435XMT

VSC7435XMT - 6-Port Carrier Ethernet Switch | Microchip

The Microchip Technology VSC7435XMT is a Serval-TE carrier Ethernet switch with 6 ports, 2 integrated copper PHYs, and integrated DPLL capability, housed in a 324-BGA package measuring 19 x 19 mm. Designed for IP edge demarcation and access equipment, it targets MEF Carrier Ethernet 2.0 service delivery for enterprise and mobile backhaul networks. A carrier Ethernet switch is a purpose-built network semiconductor that combines packet forwarding, physical-layer interfaces, timing functions, and service-delivery capabilities into one integrated device. The VSC7435XMT occupies the carrier Ethernet switch category within the broader hierarchy of Ethernet interface ICs, telecom semiconductors, and communications processors. Its integrated PHY architecture reduces the number of separate copper transceiver components required in access and edge equipment. The primary functional features are its 6-port Carrier Ethernet switching configuration, 2 integrated Gigabit Ethernet PHYs, and DPLL support. These characteristics make the device relevant to equipment that must aggregate or transport carrier-class Ethernet traffic while supporting synchronization needs associated with mobile backhaul. The 324-BGA package provides a high pin count suitable for the substantial signal, power, configuration, and management interfaces required by this networking equipment class. Microchip positions the VSC7435 within the Serval-TE family as a market-ready solution for MEF CE 2.0 service delivery. Its design targets IP edge demarcation and access equipment rather than general-purpose desktop Ethernet switching. This distinction is important because telecom access designs emphasize service classification, timing, synchronization, reliability, and interoperability with carrier-network operations in addition to conventional packet forwarding. Typical uses include Carrier Ethernet access nodes, mobile backhaul equipment, enterprise service-delivery platforms, and IP edge demarcation systems. In these applications, the integrated copper PHYs can support copper-facing network ports, while the broader switch platform organizes traffic and network services. Timing-sensitive deployments should evaluate the DPLL and synchronization implementation together with the external clocking architecture required by the complete equipment. Designers should base PCB layouts on the manufacturer's pin-definition table and recommended high-speed layout guidance rather than infer connectivity from the package outline. A 324-BGA device also demands careful power-plane design, multilayer stack-up planning, decoupling, and via-current planning. Confirm thermal performance under worst-case traffic and environmental conditions because a high-pin-count communications package concentrates power delivery and high-speed routing requirements in a compact area. This product page consolidates the manufacturer positioning, distributor package information, source links, application context, and design guidance for VSC7435XMT. It also separates confirmed product attributes from engineering details that require the complete datasheet, pin table, hardware design guidance, and qualification information before a production layout or substitution decision is approved.

詢價 聯絡我們
VSC7436XMT - 10-Port Carrier Ethernet Switch | Microchip
VSC7436XMT

VSC7436XMT - 10-Port Carrier Ethernet Switch | Microchip

The Microchip Technology VSC7436XMT is a 10-port Carrier Ethernet switch with eight 1G ports, two 10G ports, and two integrated copper PHYs, housed in a 324-ball BGA package measuring 19 x 19 mm. It is designed for telecom access, aggregation, and edge equipment that requires both gigabit and ten-gigabit Ethernet connectivity in a single switching device. The package is surface mount and identified as RoHS3 with MSL3 handling requirements. A Carrier Ethernet switch is a specialized Ethernet switching IC that combines frame forwarding, port management, and carrier-oriented network functions. Unlike a general-purpose desktop Ethernet switch, the VSC7436XMT targets telecommunications infrastructure where port density, uplink bandwidth, timing functions, and interoperability with network equipment are important. Its device family belongs to the broader hierarchy of Ethernet switch, network interface IC, telecommunications IC, and integrated semiconductor categories. The principal connectivity is provided by eight 1G ports and two 10G ports. Two integrated Cu PHYs support copper-connected links without requiring a separate physical-layer transceiver for those interfaces. The VSC7436 family also includes ViSAATM and VeriTime IEEE 1588 capabilities. IEEE 1588 timing support is especially relevant to Carrier Ethernet systems that distribute precise timing across packet networks, while ViSAATM addresses ATM-related transport functions. The 324-BGA package provides a high pin count suitable for a switch containing multiple port interfaces, digital control logic, high-speed serial interfaces, and integrated physical-layer functions. Its 19 x 19 mm body supports compact telecommunications designs while requiring careful PCB layout, high-density escape routing, and assembly processes capable of handling the large ball grid array. The surface-mount package is identified as MSL3, so handling, baking, and reflow controls should follow the manufacturer's assembly guidance. Typical equipment uses include telecom access shelves, mobile backhaul, carrier aggregation platforms, industrial Ethernet gateways, and network appliances with 1G access ports plus 10G uplinks. In these systems, the eight 1G ports can connect subscriber, service, or management equipment, while the two 10G ports provide higher-bandwidth links toward aggregation or core equipment. The integrated copper PHYs can reduce board-level component count where copper connectivity is required. The principal design challenge is not only pin assignment but high-speed signal integrity. Differential Ethernet routes, clocks, power distribution, and decoupling must be designed to prevent insertion loss, reflections, crosstalk, and reference-plane discontinuities from impairing port performance. The manufacturer's pin-description table, layout guidance, and reference design should therefore be treated as the controlling documents during schematic capture and PCB implementation. This page combines the manufacturer's Carrier Ethernet feature description with package, environmental-handling, purchasing, replacement, and engineering guidance. It also identifies where a complete public pin list, detailed electrical limits, lifecycle declarations, and qualified drop-in replacements require separate verification before a board is released for production.

詢價 聯絡我們
VSC7440XMT - 10-Port 10G L2/L3 Ethernet Switch | Microchip
VSC7440XMT

VSC7440XMT - 10-Port 10G L2/L3 Ethernet Switch | Microchip

The Microchip Technology VSC7440XMT is a SparX-IV-34 enterprise Ethernet switch IC with up to 10 ports supporting a combination of 1 Gbps, 2.5 Gbps, and 10 Gbps Ethernet links. The device is supplied in a surface-mount 324-BGA package measuring 19 mm by 19 mm and is identified as an L2/L3 enterprise Gigabit Ethernet switch. An Ethernet switch is a network-semiconductor device that receives frames on ingress ports, classifies and processes them, and forwards traffic to the appropriate egress ports. The VSC7440 belongs to the SparX-IV family of switching silicon and integrates Layer 2 switching with Layer 3 routing functions. This places it in the broader hierarchy of Ethernet interface ICs, network processors, connectivity semiconductors, and enterprise switching systems. The VSC7440 supports up to 10 ports across three Ethernet speed classes: 1 Gbps, 2.5 Gbps, and 10 Gbps. Its combination of port speeds allows one device to serve multiple access segments while supporting high-bandwidth uplinks. The manufacturer identifies the device as suitable for SMB and SME Ethernet switching environments, where integration can reduce the number of discrete switching and routing components required in a network system. Technical evaluation must account for the 324-BGA land pattern, high-speed differential routing, clocking, power delivery, thermal performance, and thermal-pad assembly requirements. A 10 Gbps interface requires careful PCB construction because insertion loss, reflection, crosstalk, and impedance discontinuities can affect signal integrity. Differential pairs should be routed as controlled-impedance structures over uninterrupted reference planes, with return paths maintained beneath the pairs. Typical uses include managed access switches, enterprise edge equipment, aggregation systems, and communications platforms that combine copper or fiber-facing interfaces with higher-speed uplinks. Photonic interfaces require compatible optical transceivers and proper isolation from the high-speed copper channels, while copper ports require careful magnetics and impedance-controlled board design. The device is also relevant to systems requiring integrated Layer 2 and Layer 3 traffic handling. Use the manufacturer data sheet as the authoritative source for the complete port map, pin assignment, power rails, maximum clock requirements, register initialization, and thermal limits. System designers should validate the target PCB against the package drawing and reference design before releasing a layout. Firmware, PHY interfaces, SerDes configuration, clock topology, and management software must also be reviewed together rather than treated as independent tasks. This page organizes the device’s network role, package constraints, application guidance, comparison limits, and engineering design considerations into a practical reference for engineers evaluating the VSC7440XMT for multilayer enterprise Ethernet equipment.

詢價 聯絡我們
VSC7448YIH-01 - 52-Port 80G Ethernet Switch | Microchip
VSC7448YIH-01

VSC7448YIH-01 - 52-Port 80G Ethernet Switch | Microchip

Microchip Technology VSC7448YIH-01 is a SparX-IV-80 enterprise Ethernet switch with an 80G switching capacity and as many as 52 ports. The device supports a configurable combination of 1G, 2.5G, and 10G Ethernet links and is packaged in a 672-FCBGA measuring 27 x 27 mm. It also provides L2 and L3 switching, making it suitable for industrial Ethernet, telecom, enterprise access, aggregation, and stacking equipment. An Ethernet switch is a network-semiconductor device that receives frames on multiple physical interfaces and forwards them between ports using Layer 2 addresses. A Layer 3 switch additionally performs routing functions, while a stackable switch supports coordinated operation across multiple devices. The VSC7448 belongs to Microchip's SparX-IV-80 family, combining high-density port configurations with 10G uplink capability in one integrated device. The headline features of VSC7448YIH-01 include an 80G switching fabric, support for up to 52 Ethernet ports, and mixed 1G, 2.5G, and 10G port configurations. The 672-FCBGA package provides the dense physical interface required for a high-port-count switching ASIC. A distributor listing also identifies the part as a 52-port L2/L3 stackable Gigabit Ethernet switch with 10 Gbps links. This device targets networking equipment that needs high aggregation capacity without distributing traffic across many external switching components. Its port mix can serve copper or fiber-facing access interfaces through suitable external PHYs, while 10G links support higher-bandwidth aggregation. Enterprise switching features, combined with Layer 3 operation, allow the device to serve in access, distribution, and selected core-adjacent designs rather than only simple unmanaged bridging. Typical uses include industrial Ethernet switches, telecom access equipment, enterprise campus-edge systems, network appliances, and stacked LAN configurations. In these systems, the device can consolidate many lower-speed ports and provide high-speed uplinks. Designers should account for the large BGA thermal and routing requirements, validate the specific port map and protocol stack, and complete high-speed signal-integrity and power-integrity validation on the final board. The most important design consideration is that a 672-ball BGA requires careful escape routing, multilayer PCB construction, controlled-reference-plane geometry, and adequate thermal design. The 27 x 27 mm package also makes system mechanical constraints significant. Use the manufacturer's evaluation guidance and device documentation when defining layer stack-up, power delivery, clocking, SerDes implementation, and connector or PHY placement. This page consolidates the device's port and package characteristics with application guidance, comparison details, and actionable PCB considerations. It is intended to help networking engineers establish whether the VSC7448YIH-01 fits a specific 1G, 2.5G, or 10G industrial Ethernet architecture before beginning high-density BGA implementation.

詢價 聯絡我們
VSC7460YIH - 24x1G + 4x10G XAUI Ethernet Switch | Microchip
VSC7460YIH

VSC7460YIH - 24x1G + 4x10G XAUI Ethernet Switch | Microchip

The Microchip Technology VSC7460YIH is a Jaguar-1 family Carrier Ethernet switching circuit that integrates 24 10/100/1000 Mbps Ethernet ports and four 10 Gbps XAUI serial Ethernet ports in a 672-pin HFCBGA package. It is a lead-free, automotive temperature grade device intended for telecommunications and enterprise switching equipment. An Ethernet switch is an integrated circuit that frames and forwards Ethernet packets between multiple ports using dedicated hardware rather than a host processor. It sits below the network processor in the equipment hierarchy and above the physical PHY layer. The VSC7460YIH is a Carrier Ethernet (CE) switch, meaning it adds telecom-oriented functions such as service and port policing, traffic classification, and sub-50 ms protection switching to a conventional enterprise switch core. Key features of the device include 24 copper Gigabit Ethernet ports for 1000BASE-T, 100BASE-TX and 10BASE-T links, four XAUI lanes running at 10 Gbps each for high-speed uplink or stacking connections, and optional support for up to eight 2.5 Gbps Ethernet ports when two of the XAUI lanes are reconfigured. The part is supplied in a 672-pin square CGA-code HFCBGA package and is listed as lead-free (Pb free) with an automotive temperature grade designation. Architecturally, the switch is built around a high-performance packet-processing pipeline with integrated GMII/SGMII management paths, a host processor interface for configuration and telemetry, and table-based forwarding engines sized for Carrier Ethernet service queues. Because the four XAUI ports are consumed by 10 Gbps uplinks, port density on the copper side is decoupled from the number of physical network interfaces a chassis can present, allowing 1 Gbps access ports to be aggregated toward 10 Gbps or 40 Gbps backbones. Typical deployments include telecom access and aggregation shelves, mobile backhaul concentrators, industrial Ethernet aggregation equipment, and enterprise campus access switches requiring 24 copper ports plus high-speed uplinks in a single module. The automotive temperature grade makes the device attractive for harsh-environment industrial and vehicle-network designs that require extended ambient operation. One key design consideration is that the 672-pin HFCBGA demands a multilayer PCB with short, matched high-speed SerDes routing, controlled reference-plane design, and careful power and ground plane distribution around the SerDes sections. Layout should follow the manufacturer reference design for breakout of the XAUI lanes. This page consolidates the manufacturer product-page data, distributor availability listings, packaging detail and application guidance for the VSC7460YIH into one engineering reference, including drop-in family alternatives, a parameter-by-parameter comparison table, and practical board-level design notes.

詢價 聯絡我們
VSC7462YIH - 12x1G + 4x10G Ethernet Switch | Microchip
VSC7462YIH

VSC7462YIH - 12x1G + 4x10G Ethernet Switch | Microchip

The Microchip VSC7462YIH is a Carrier Ethernet switching semiconductor with 12 10/100/1000 Mbps Ethernet ports and four 10 Gbps XAUI Ethernet ports, housed in a 672-pin HFCBGA package. Two XAUI ports can optionally be configured for as many as eight 2.5 Gbps Ethernet ports, giving the device a combined 16-port configuration spanning 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, and 10 Gbps rates. A Carrier Ethernet switch is a high-performance Ethernet interface device designed to combine packet switching, transport-network awareness, and service-aware traffic management. It belongs to the Ethernet switch, network interface, and communication semiconductor hierarchies. Compared with general-purpose endpoint Ethernet controllers, a Carrier Ethernet switch is intended to aggregate traffic, apply carrier-oriented policies, and provide hardware-assisted forwarding across multiple line-rate interfaces. The VSC7462 is based on Microchip's Virtualized Service Aware Architecture, or ViSAA. This architecture provides the silicon foundation for service-edge and Carrier Ethernet processing functions. The four XAUI interfaces support 10 Gbps links, while the twelve copper Ethernet ports support rates from 10 Mbps through 1 Gbps. This combination allows one switching device to connect lower-rate access traffic to higher-capacity uplinks without requiring separate aggregation silicon for each speed class. A principal implementation consideration is that this is a complex 672-pin BGA device rather than a conventional small-outline interface IC. Its exposed-pad package requires a multilayer PCB, controlled escape routing, extensive ground-plane continuity, and careful high-speed XAUI layout. Power delivery also spans many supply and ground balls, so the design must follow the manufacturer's reference design, recommended decoupling network, and ball-assignment guidance rather than treating the package as a simple two-rail part. Typical uses include Carrier Ethernet service-edge equipment, mobile backhaul, metro aggregation, access-network equipment, packet-processing platforms, and systems that combine 1 Gbps copper ports with 10 Gbps uplinks. The XAUI interfaces can also support 2.5 Gbps configurations, making the device useful where operators are migrating access links while preserving higher-rate backbone capacity. Engineers should treat board compatibility, firmware, PHY integration, clocking, and software configuration as a complete design decision rather than a component substitution. The VSC7462 family is associated with the VSC6810 CEServices software package and related managed-switch development environments. Those tools and the reference hardware materially affect bring-up performance and feature enablement. This page consolidates the verified port configuration, package information, architecture, sourcing details, and engineering considerations for VSC7462YIH. It also distinguishes documented device capabilities from parameters that require confirmation in the manufacturer datasheet, helping engineers plan schematic, PCB, thermal, and software integration before committing a 672-pin Carrier Ethernet design to production.

詢價 聯絡我們
VSC7511XMY - 4-Port Gigabit Ethernet Switch | Microchip
VSC7511XMY

VSC7511XMY - 4-Port Gigabit Ethernet Switch | Microchip

The Microchip Technology VSC7511XMY is an unmanaged 4-port Layer-2 Gigabit Ethernet switch with four integrated copper PHYs or four SGMII interfaces in a 172-pin QFN package with an exposed pad. It combines four Gigabit Ethernet ports, hardware-assisted Layer-2 forwarding, 1G/6G SerDes capability, and PTP hardware timestamping in one package. The device is positioned as a low-power switching solution for industrial Ethernet equipment. A Gigabit Ethernet switch is a network-semiconductor device that receives Ethernet frames on one or more ports, examines Layer-2 information, and forwards frames to the appropriate destination ports. The VSC7511XMY belongs to the Ethernet switch hierarchy within interface ICs and is intended for compact embedded systems requiring multiple Gigabit Ethernet connections without a separate external switch chipset. Its four integrated copper PHYs simplify implementation because each port includes the physical-layer interface required for a copper Ethernet connection. Alternatively, the device supports four SGMII interfaces for systems that use serial SerDes connections rather than integrated copper ports. This flexibility permits one switching device to address multiple industrial networking architectures. The verified source material also identifies 1G/6G SerDes operation and hardware timestamping support for PTP-oriented equipment. The switch includes basic and advanced classifiers that determine frame properties such as VLAN membership, QoS class, and drop precedence. These classifications support policing, frame marking, statistics collection, security enforcement, Layer-2 forwarding, and frame rewriting. Such Layer-2 services make the device suitable for industrial gateways, automation controllers, communication equipment, and embedded network appliances where deterministic Ethernet behavior is valuable. Typical uses include industrial Ethernet switches, factory-floor gateways, programmable automation controllers, transport and infrastructure equipment, and embedded telecom or test systems. In each case, four integrated ports can reduce the number of external PHY devices while preserving Layer-2 switching throughput. The integrated-PHY configuration is particularly useful where board area and component count are constrained. Designers should confirm the exact pin assignments, exposed-pad connection, supported SGMII mode, clocking arrangement, and thermal-management requirements from the manufacturer datasheet before layout. Because this is a high-pin-count mixed-signal network IC, careful differential-pair routing, uninterrupted supply planes, solid grounding, and compliance testing for the intended copper Ethernet environment are essential. This page consolidates the verified distributor, manufacturer, and cross-reference information with practical application guidance, a parameter comparison, and explicit data-gap notes. It distinguishes verified VSC7511XMY capabilities from broader switch devices that are not confirmed as pin-to-pin replacements.

詢價 聯絡我們
VSC7512XMY - 10-Port Gigabit Ethernet Switch | Microchip
VSC7512XMY

VSC7512XMY - 10-Port Gigabit Ethernet Switch | Microchip

Microchip Technology VSC7512XMY is an unmanaged Layer-2 Gigabit Ethernet switch with 10 ports and four integrated copper PHYs, supplied in a 172-QFN dual-row surface-mount package with an exposed pad. The verified product information identifies a 1.2 V supply and an operating-temperature range of -40°C to +125°C, making the device suitable for industrial networking equipment requiring integrated copper connectivity and an extended temperature range. A Gigabit Ethernet switch is a network-interface semiconductor that forwards Ethernet frames between connected devices at Layer 2 of the OSI model. Unlike a routed network processor, the VSC7512 provides transparent frame switching without adding IP-routing functions. Its integrated copper PHYs combine digital switching, physical-layer transceiver functions, and copper media interfaces within one device, reducing the number of external network components required in compact industrial Ethernet designs. The primary features verified for the VSC7512 include full integration of four copper PHYs and a total of 10 Gigabit Ethernet ports. The device is marketed as an unmanaged industrial Ethernet switch, so its core function is local frame forwarding rather than configuration through a network management interface. The manufacturer describes it as a low-power Gigabit Ethernet switching solution, differentiating it from designs that require multiple discrete PHY components for copper ports. The VSC7512 belongs to the Ethernet-switch and network-interface IC hierarchy, where it combines a Layer-2 switch, integrated physical-layer transceivers, and copper Ethernet ports in one package. This integration supports designs for industrial control cabinets, factory automation networks, and embedded Ethernet equipment. Its -40°C to +125°C operating range makes it appropriate for environments where commercial-temperature networking components may be insufficient, although designers should still verify complete system thermal requirements. Typical uses include unmanaged industrial Ethernet switches, factory-floor connectivity equipment, embedded control systems, and compact network-interface appliances. The VSC7512 can reduce board area by integrating four copper PHYs, but the exposed-pad package still requires careful PCB thermal design, adequate copper area, and verification of the manufacturer's recommended layout and reflow conditions. Designers should follow the manufacturer datasheet for the complete 172-pin assignment, exposed-pad connection, power-supply decoupling, magnetics interface, and layout guidance. The supplied web excerpts do not include a verified pin-by-pin map or detailed electrical limits, so those values must be checked against the official datasheet before schematic capture or PCB release. This product record consolidates verified manufacturer and distributor information, purchase context, technical applications, and selection guidance. It also distinguishes documented capabilities from unavailable details, avoiding unsupported claims about pricing, pin assignments, compliance, and substitute devices.

詢價 聯絡我們
VSC7513XKS - 8-Port Industrial Ethernet Switch | Microchip
VSC7513XKS

VSC7513XKS - 8-Port Industrial Ethernet Switch | Microchip

The Microchip Technology VSC7513XKS is an 8-port industrial Ethernet switch with 4 integrated copper PHYs. It supports a combination of 1G and 2.5G Ethernet ports and is designed for industrial Ethernet and SMB switching systems. The device is packaged as a 256-pin PBGA measuring 17 mm by 17 mm. Its feature set includes VLAN and QoS processing, intelligent frame processing, egress frame manipulation, security functions, and distributed timing technology for industrial applications. An Ethernet switch is a semiconductor that connects multiple network nodes and forwards Ethernet frames according to learned or configured MAC addresses. The VSC7513 family belongs to the broader category of Ethernet interface ICs, network switches, communication semiconductors, and industrial automation components. Unlike a simple physical-layer transceiver, this device combines multiple Ethernet ports, frame processing, traffic management, and timing functions within one switching platform. The VSC7513XKS provides 8 switching ports and integrates 4 copper PHYs, allowing industrial equipment or network infrastructure to use a compact switch implementation. Its combination of 1G and 2.5G Ethernet support is relevant for factory automation, industrial gateways, embedded systems, and SMB equipment that need managed local connectivity. The manufacturer describes the device as supporting industrial and enterprise Ethernet switching features. The switch uses multi-stage TCAM technology for VLAN and QoS processing. This supports traffic classification and differentiated service delivery. Intelligent frame processing provides security-related capabilities, while egress frame manipulation can support traffic shaping and system-level network requirements. The integrated distributed timing technology is particularly relevant to industrial systems that need deterministic synchronization across connected equipment. VSC7513XKS is intended for applications where a compact, highly integrated switching device can simplify board design compared with a discrete collection of Ethernet PHYs and supporting controllers. The 256-PBGA package is a substantial surface-mount package, so PCB layout must provide adequate thermal and electrical performance and must follow the manufacturer’s land pattern and reference design guidance. The supplied web sources confirm the function, port configuration, integrated PHY count, package format, and core switching capabilities; detailed electrical limits, pin assignments, thermal ratings, clocking requirements, and power-consumption values were not included in the provided data. This page is intended to support initial engineering selection for the VSC7513XKS. Before committing to a design, consult the official VSC7513 data sheet, errata, hardware design guidance, and reference designs to verify power rails, interfaces, timing constraints, package layout, thermal performance, and software support. The device should be selected primarily when its integrated 8-port industrial Ethernet architecture and 1G/2.5G flexibility are required, rather than as a generic low-cost Ethernet switch.

詢價 聯絡我們
VSC7514XKS - 10-Port 2.5G Industrial Ethernet Switch | Microchip
VSC7514XKS

VSC7514XKS - 10-Port 2.5G Industrial Ethernet Switch | Microchip

The Microchip Technology VSC7514XKS is a 10-port Gigabit Ethernet and SMB managed-switch IC supporting a combination of 1G and 2.5G Ethernet ports, supplied in a 256-pin PBGA package measuring 17 mm by 17 mm. The device is positioned for industrial and enterprise Ethernet systems that require multiport Layer 2 switching, integrated copper PHYs, and support for both Gigabit Ethernet and 2.5G Ethernet links. Its 10-channel network-switch architecture consolidates several Ethernet interfaces into one dedicated switching component. A managed Ethernet switch is a semiconductor that receives Ethernet frames from multiple ports, examines destination addresses, and forwards traffic to the appropriate port or ports. In the broader product hierarchy, the VSC7514XKS is an Ethernet interface IC, then a network switch IC, then an integrated circuit and semiconductor. Unlike a discrete Ethernet PHY, this device combines multiple port interfaces, integrated copper PHYs, and switching functions within one package. The VSC7514 family provides 10 Gigabit Ethernet or SMB ports, with four integrated copper PHYs identified in the distributor product description. This combination lets equipment designers support mixed-speed industrial networks without implementing every physical-layer function as a separate device. The 256-PBGA package provides the interconnect density needed for the device's parallel data paths, power connections, management signals, and reference clock circuitry. The switch is designed for industrial and enterprise Ethernet equipment, where local port aggregation and deterministic network segmentation can simplify system architecture. Its combination of 1G and 2.5G links is relevant to machine vision, industrial automation, factory gateways, network infrastructure, and embedded edge equipment. Compared with a collection of discrete PHY components and an external switching ASIC, an integrated managed-switch IC can reduce board-level component count while centralizing network configuration. The VSC7514XKS is also suitable for embedded systems that need multiple copper Ethernet ports, including industrial controllers, communication equipment, and network appliances. System designers should consult the Microchip product page and the VSC7514 datasheet for the authoritative port map, electrical limits, clock requirements, initialization sequence, package ball map, and supported software configuration before releasing a PCB. A 256-pin PBGA requires careful PCB layout, continuous high-speed return paths, controlled reference-clock routing, and a thermal design appropriate for the device's dissipation. Differential Ethernet pairs should be routed according to the Microchip reference design and signal-integrity guidance. Adequate layer stacking, copper thermal spreading, and locally placed decoupling are especially important because this package concentrates many interfaces in a small area. This product page consolidates the verified manufacturer and distributor information into an application-oriented summary, highlights where design data is still required, and separates documented capabilities from unverified assumptions. It also documents why the listed competitor Ethernet devices are not presented as drop-in replacements without package, ball-map, firmware, and feature-level verification.

詢價 聯絡我們
VSC7982XYE - 11.3 Gb/s 3.3V Laser Driver | Microchip
VSC7982XYE

VSC7982XYE - 11.3 Gb/s 3.3V Laser Driver | Microchip

Microchip Technology VSC7982XYE is a low-power 3.3V laser and modulator driver capable of data rates up to 11.3 Gb/s. The device is designed for VCSEL, directly modulated laser, and electro-absorption modulated laser (EML) signal chains, and it is offered in a compact low-cost QFP-N package optimized for small-footprint optical communications equipment. A laser and modulator driver is an interface IC that converts high-speed digital data into the current-driven electrical signal required by optical transmitters. Within the optical communication hierarchy, the VSC7982XYE combines a data path, modulation output, bias control, and on-chip operational amplifiers to reduce the number of external components needed around a laser or modulator. It therefore sits between the digital transceiver circuitry and the optical transmitter module. The principal operating characteristics include a maximum data rate of 11.3 Gb/s, a 3.3V power supply, and support for VCSEL, DML, and EML light sources. The family documentation also identifies low-power operation as a key benefit. Integrated on-chip operational amplifiers are intended to provide stable output modulation and output-bias control, helping reduce the discrete component count on the transmitter board. The VSC7982 family architecture is tailored to high-speed optical links where modulation current must be controlled accurately while the physical implementation remains compact. Low-cost QFP-N packaging supports production layouts where optical modules and line cards require many closely spaced high-speed driver channels. Because this device controls bias and modulation, PCB signal integrity, supply decoupling, return-path continuity, and controlled-impedance routing directly influence achievable data rate and eye quality. Typical uses include 10.3G and 10G-class optical transceiver modules, VCSEL transmitters, DML transmitters, EML transmitters, telecommunications equipment, and data-communications links. It can also be evaluated for test and measurement systems, instrumentation, and industrial optical-control modules that require a compact high-speed current driver. The device is particularly relevant where a fixed-function laser driver is preferable to a general-purpose amplifier and discrete current-source network. When laying out a circuit using the VSC7982XYE, place decoupling capacitors close to the supply and ground pins and preserve a continuous return path beneath the high-speed package. Use the manufacturer's reference design and pin-description tables for exact power, ground, bias, modulation, and control connections. Confirm the output-impedance and optical-module requirements of the selected laser before finalizing resistor values and termination arrangements. This page organizes the verified VSC7982XYE characteristics, purchase and availability guidance, family-level comparisons, application context, and practical design considerations. It also distinguishes documented capabilities from parameters that require confirmation in the manufacturer datasheet, helping engineers move from component selection to a defensible PCB implementation.

詢價 聯絡我們
VSC7984XYF - 11.3 Gb/s EAM Driver | Microchip Technology
VSC7984XYF

VSC7984XYF - 11.3 Gb/s EAM Driver | Microchip Technology

The Microchip Technology VSC7984XYF is an electroabsorption modulator driver for SONET/SDH and 10 GbE optical-transmission equipment, with the device described as an 11.3 Gb/s clocked driver and associated documentation also identifying a 12.5 Gb/s operating capability. It supports selectable data retiming to improve jitter performance while providing external controls for output bias voltage, modulation voltage, and duty cycle. The component is associated with a QFN package, although the exact package dimensions and pin count are not established by the accessible manufacturer information. An electroabsorption modulator driver, or EAM driver, is an interface IC that converts high-speed electrical data into the differential drive signals required by an electroabsorption-modulated optical transmitter. It belongs to the optical communication interface hierarchy: EAM driver, interface IC, integrated circuit, and semiconductor. Its primary role is to preserve signal integrity while delivering sufficient modulation voltage and bias conditions to an external optical modulator. Selectable data retiming is the central performance feature of the VSC7984XYF. Retiming can resynchronize the incoming data stream to an internal or associated clock, helping reduce jitter in systems where source-device timing and transmitter-chain alignment are imperfect. The output-bias, modulation-voltage, and duty-cycle controls allow the driver to be adjusted to the requirements of the optical modulator and its surrounding drive network. The device also incorporates internal operational amplifiers and an on-chip voltage reference. These functions reduce the amount of external circuitry needed to establish stable modulation and bias conditions. Internal amplification can simplify the signal path, while the reference supports repeatable control of the driver's operating state. The clocked architecture remains sensitive to trace routing, supply integrity, and the quality of the high-speed differential connections. Typical uses include 10 GbE optical modules, SONET/SDH transmit equipment, optical transport systems, and other 10.3125 Gb/s-class optical interfaces. The VSC7984XYF is most appropriate where an external electroabsorption modulator requires controlled bias, adjustable modulation drive, and selectable retiming. Its suitability in a specific design still depends on the complete modulator interface, target jitter margin, and required data-rate classification. When laying out a circuit around the VSC7984XYF, keep the high-speed differential output paths short and impedance-controlled, provide clean return paths, and place decoupling and termination components close to their associated pins. Confirm the exact pin assignments, exposed-pad requirements, supply sequencing, and output-impedance settings in the manufacturer datasheet before release to manufacturing. This page organizes the verified VSC7984XYF technical facts, sourcing information, application guidance, and design considerations into one engineering reference. It also distinguishes directly documented capabilities from package details and lifecycle information that must be confirmed before a new design is released.

詢價 聯絡我們
VSC8115XYA-T - 622 Mbps Clock Recovery Unit | Microchip
VSC8115XYA-T

VSC8115XYA-T - 622 Mbps Clock Recovery Unit | Microchip

The Microchip Technology VSC8115XYA-T is a 622 Mbps clock recovery unit (CRU) for SONET/SDH and dense wavelength division multiplexing applications. It provides one recovered-clock output in a 20-pin TSSOP package and is supplied in lead-free tape-and-reel packaging. The device belongs to the application-specific clock and timing IC family, where clock and data recovery circuits restore timing information from transmitted data streams. A clock recovery unit is a specialized timing IC used in high-speed digital communication systems. Its role within the optical-transceiver hierarchy is to extract or recover a usable clock from a serial data stream when the transmitted signal no longer carries a separate clock conductor. Clock recovery units support communication infrastructure by helping downstream digital logic operate from a timing reference synchronized to the incoming data. The VSC8115XYA-T is identified as a single-channel, 622 Mbps device with one output. Its principal documented characteristics are its 622 Mbps operating rate, one recovered output, 20-pin TSSOP construction, and lead-free tape-and-reel delivery format. These details position it for SONET/SDH, DWDM, and related telecom signal-conditioning designs where a dedicated recovery function is required. Clock recovery differs from ordinary clock generation because the IC must derive stable timing from a data stream that may have accumulated timing variation. In a practical optical communication path, a recovered clock can feed parallelizing logic, a descrambler, a retimer, or another digital processing block. Correct implementation depends on the interface requirements of the surrounding equipment, including data rate, reference-clock arrangement, logic level, and jitter tolerance. Typical uses include 622 Mbps line-card interfaces, SONET/SDH transport equipment, DWDM optical networking, telecommunications test equipment, and clock-recovery sections of optical transceivers. The 20-pin TSSOP package also allows reuse of board layouts intended for compatible 20-pin clock-and-timing devices. The VSC8115XYA-06-T is a closely related family member listed at the same 622 Mbps operating point. Before laying out a replacement board, verify the complete pin arrangement, electrical limits, reference requirements, and timing behavior in the Microchip manufacturer datasheet. A mechanically similar 20-pin package alone does not establish signal compatibility, especially for a clock-recovery interface whose internal architecture and pin functions must match the original design. This product page combines the verified 622 Mbps and 20-pin TSSOP characteristics with family-level alternatives, application guidance, and design checks that support faster component selection and board-level planning.

詢價 聯絡我們