VSC7424XJG-12 - 10-Port Gigabit Ethernet Switch | Microchip
MPN: VSC7424XJG-12 ✓ 啟用中VSC7424XJG-12 概覽
A Gigabit Ethernet switch is a network-semiconductor device that receives Ethernet frames on multiple ports and forwards them according to Layer 2 addresses. An integrated copper PHY combines digital Ethernet framing with the physical-layer circuitry required to communicate over twisted-pair cabling. By integrating eight copper PHYs into the switching device, the VSC7424XJG-12 reduces the number of separate physical-layer components required in a multiport network design while retaining centralized packet forwarding and management.
The VSC7424 family's defining features include its 10-port configuration, eight integrated copper PHYs, and 65 nm SimpliPHY implementation. Microchip describes the device as a highly integrated and power-conscious option for managed Ethernet switching. The SparX-III-10 designation identifies the switching platform used in the part, while the 672-HSBGA package supports the substantial ball count required for integrated high-speed Ethernet I/O, power delivery, ground connections, and control signals.
The device is positioned for equipment that requires several copper Gigabit Ethernet connections in a limited board area. Relevant implementation considerations include careful high-speed layer-transition routing, controlled-length Ethernet differential pairs, solid return-path construction, decoupling close to supply pins, and compliance testing across all ten ports. Because the package is not a standard small-outline package, PCB designers should use the manufacturer's land pattern and pin-assignment documentation rather than infer dimensions from a generic HSBGA drawing.
Typical end uses include industrial Ethernet switches, network-interface appliances, embedded communications equipment, access systems, and other managed infrastructure products requiring multiple Gigabit Ethernet ports. For these systems, the integrated copper PHYs can simplify board partitioning, while the serial management interface supports configuration by an embedded host. The trade-off is a large, high-pin-count BGA package whose assembly, inspection, and prototype rework demands are greater than those of a leaded or small-outline switch.
This product page consolidates the manufacturer-defined port count, PHY integration, process technology, package, interface, and compliance attributes with application guidance and a clearly scoped replacement analysis. It also distinguishes orderable variants by the electrical details that must be confirmed in the hardware design rather than treating package similarity alone as proof of pin-compatible interchangeability.
直接替換替代品,適用於 VSC7424XJG-12 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
VSC7424XJG-02
✅ 直接替換📋 參考替代品(不在目錄中)
VSC7424XJG-12 最大額定值與電氣特性
| Product Type | Managed Layer 2 Gigabit Ethernet switch |
| Total Port Count | 10 ports |
| Integrated Copper PHY Count | 8 PHYs |
| Copper Ethernet Speed | Gigabit Ethernet |
| Switching Architecture | SparX-III-10 |
| Host Control Interface | Serial interface |
| Process Technology | 65 nm SimpliPHY |
| 封裝 | 672-HSBGA, 27 mm x 27 mm |
| 安裝類型 | Surface mount |
| RoHS Classification | RoHS3 |
| Moisture Sensitivity Level | MSL1 |
| Number of I/O Balls | 672 balls |
VSC7424XJG-12 672-hsbga, 27 mm x 27 mm 腳位配置指南
VSC7424XJG-12(672-hsbga, 27 mm x 27 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: VSC7424XJG-12.
請參閱 資料表 以查看完整腳位配置。
典型應用
VSC7424XJG-12 適用於 6 應用s: Industrial Managed Ethernet Switching, Network Interface Appliances, Embedded Communications Equipment, Access and Edge Network Equipment, Gigabit Ethernet Test and Measurement, Secure Network Appliances.
Industrial Managed Ethernet Switching
The VSC7424XJG-12 fits managed industrial Ethernet equipment that needs ten switch ports and eight integrated copper PHYs within one device. Its SparX-III-10 architecture provides a concentrated Layer 2 switching function, while the serial interface allows an embedded controller to configure the network equipment. The 27 mm by 27 mm 672-HSBGA can reduce the number of separate PHY packages, although it requires a high-density PCB, controlled BGA assembly, and careful Ethernet signal routing. Industrial qualification should be confirmed from the exact order-code temperature and reliability specifications.
推薦
Network Interface Appliances
The VSC7424XJG-12 is suitable for network-interface appliances that aggregate multiple copper Gigabit Ethernet links into a managed switching platform. Eight integrated PHYs directly support twisted-pair port implementations, while the 10-port SparX-III-10 configuration provides additional switching resources within a single package. A serial management connection allows an embedded processor to handle configuration and monitoring. The principal board-level constraint is the 672-ball HSBGA, which demands a registered PCB stack-up, fine-pitch assembly capability, and careful separation of high-speed differential routing from noisy power paths.
推薦
Embedded Communications Equipment
The VSC7424XJG-12 can serve as the central Ethernet switching element in embedded communications equipment requiring multiple Gigabit connections and host-managed Layer 2 forwarding. Integrating eight copper PHYs with the SparX-III-10 switch reduces external PHY count and simplifies physical-port assignment in a multi-interface product. The serial control interface provides a path for embedded configuration software. Designers should reserve clean power and ground distribution for the 672-HSBGA and route each copper Ethernet differential pair as a controlled-impedance structure according to the manufacturer reference design.
推薦
Access and Edge Network Equipment
The VSC7424XJG-12 supports access and edge equipment requiring ten managed switch ports in a single high-density package. The eight integrated copper PHYs are particularly useful where the enclosure provides several RJ45-based Gigabit Ethernet connections, and the SparX-III-10 platform centralizes Layer 2 forwarding. An embedded host can use the serial interface for configuration, status monitoring, and controlled startup. Board implementation must account for connector placement, chassis or enclosure heat dissipation, and the assembly yield associated with a 672-ball BGA.
推薦
Gigabit Ethernet Test and Measurement
The VSC7424XJG-12 can be used in network test or measurement equipment that requires a high-density managed switching block. Ten ports allow multiple copper links to be routed through a common Layer 2 fabric, while eight integrated PHYs reduce the number of external copper transceiver devices required. The serial interface can connect the switch to an instrument controller for configuration and status collection. For accurate measurements, designers should keep Ethernet traces short, provide stable references and supplies, and follow the manufacturer's recommended BGA pad and via layout to minimize insertion loss.
推薦
Secure Network Appliances
The VSC7424XJG-12 is applicable to secure network appliances that combine multiple wired Gigabit Ethernet interfaces with centralized Layer 2 management. The eight integrated copper PHYs provide a compact foundation for firewall, gateway, and secure-access products, while the 10-port SparX-III-10 platform supports multiport traffic forwarding. A host processor can control the device through the serial interface. In a security-oriented design, isolate management access, validate all external Ethernet paths for compliance, and keep high-speed routing and power distribution separate from sensitive auxiliary circuitry.
推薦
推薦產品摘要
工程參考資料,適用於 VSC7424XJG-12 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | VSC7424XJG-02 |
|---|---|---|
| Package | 672-HSBGA (27x27) | 672-HSBGA (27x27) |
| Brand | Microchip Technology | Microchip Technology |
| Product Type | Managed Layer 2 Gigabit Ethernet switch | Managed Layer 2 Gigabit Ethernet switch |
| Switching Platform | SparX-III-10 | SparX-III-10 |
| Process Technology | 65 nm SimpliPHY | 65 nm SimpliPHY family |
主要差異化特點
- Combines ten switch ports with eight integrated copper PHYs (對比VSC7424XJG-02)
- High port integration in a single switching package (對比VSC7424XJG-02)
- Exact order-code identification for procurement (對比VSC7424XJG-02)
設計說明
Use Microchip's 672-HSBGA land pattern and reference layout rather than a generic large-array BGA footprint. Route each copper Gigabit Ethernet pair as a controlled-impedance differential structure, keep the two conductors closely coupled, minimize vias, and provide a continuous reference plane beneath the pair. Confirm layer transitions and connector escape geometry with the manufacturer reference design before releasing the PCB stack-up.
Partition the BGA power balls according to the manufacturer's supply and ground recommendations, and place the required decoupling capacitors as close to their assigned device balls as the land pattern permits. Avoid sharing narrow copper necks between high-current and quiet circuits. Validate the final rail sequence, ripple, and startup behavior at the connector, switch core, and integrated PHY supply domains.
The 672-HSBGA concentrates many high-speed signals and supply connections into a 27 mm by 27 mm area, so thermal design must consider the complete Ethernet switching load rather than a single nominal condition. Follow the manufacturer's layer-stacking and via-array recommendations, provide uninterrupted ground planes beneath the device where permitted, and evaluate junction temperature with realistic port activity and enclosure conditions.
Do not treat VSC7424XJG-12 and VSC7424XJG-02 as interchangeable merely because both use the 672-HSBGA package and SparX-III-10 platform. Compare ordering information, ball assignments, electrical limits, timing, clocking, firmware support, and qualification. Likewise, verify whether a proposed VSC7428 or competing switch exposes the same signal functions and external interfaces before calling it a drop-in replacement.
合規資訊
The product listing records RoHS3 compliance and MSL1. The available product information does not establish REACH, halogen-free, conflict-minerals, or automotive qualification status for this exact order code.