XC2C64A-7VQG44C
XC2C64A-7VQG44C - 64-Macrocell 1.8V CPLD | Xilinx
Xilinx XC2C64A-7VQG44C is a CoolRunner-II complex programmable logic device with 64 macrocells, 4 logic blocks, 1,500 usable gates, and a maximum system frequency of 159 MHz. It uses 0.18 µm CMOS Flash technology, operates from a 1.8 V core supply, and is packaged in a 44-pin VTQFP measuring 10 mm by 10 mm. The device provides 33 user I/O pins and supports hot-swap operation for controlled insertion into a live backplane.
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple logic functions into one reconfigurable device. Its hierarchy places it within programmable logic alongside FPGA and CPLD technologies, where it is especially useful for compact glue logic, protocol conversion, bus arbitration, and interface control. CoolRunner-II combines nonvolatile configuration storage with low-power operation, allowing the implemented circuit to retain its logic after power is removed.
Key features include 64 macrocells distributed across 4 function blocks, up to 1,500 usable gates, and a maximum system frequency of 159 MHz. The -7 speed designation places this part in the 159 MHz performance class, while the G package code identifies the 44-pin VTQFP configuration. Input/output performance can reach a 4.6 ns pin-to-pin logic delay, and the architecture is optimized for systems operating from a 1.8 V supply.
The CoolRunner-II architecture uses Xilinx RealDigital technology in a 0.18 µm CMOS Flash process. Flash-based configuration supports nonvolatile programmed logic, while the low-power design targets both high-performance and battery-operated equipment. The programmable macrocell structure provides a practical capacity for multi-function logic without the resource overhead of a much larger FPGA.
Typical uses include communication-equipment interface logic, battery-powered portable systems, bus control, protocol bridging, embedded control, and general-purpose glue logic. The 33 user I/O pins are suitable for connecting the CPLD to external memory, processors, converters, and peripheral devices when the board's electrical requirements match the selected I/O standards.
Designers should review the DS311 device pin table before assigning every signal, especially configuration, power, ground, and I/O pins. Validate signal timing at the intended system frequency, apply the manufacturer's recommended bypass capacitors, and observe the package-specific keep-out and thermal-pad guidance. For an existing XC2C64 design, the AMD XCN05017 notice identifies XC2C64A as the enhanced pin-for-pin replacement for the original XC2C64.
This product record combines the DS311 family specifications with practical device-selection, timing, package, and migration guidance. It also distinguishes same-package speed-grade alternatives from larger-package CoolRunner-II variants, helping engineers preserve PCB compatibility while evaluating performance, temperature grade, and lifecycle constraints.
詢價
聯絡我們