產品(44,000+)

EFM32G842F128-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32G842F128-QFP64

EFM32G842F128-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32G842F128-QFP64 is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 128 kB of Flash memory, 16 kB of RAM, and 53 digital I/O pins in a 64-TQFP surface-mount package measuring 10 mm by 10 mm. The device is designed for energy-sensitive embedded systems that require responsive processing, low-power operation, and extensive integrated peripherals. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor that combines a standardized instruction set with peripherals integrated onto one semiconductor die. Within the product hierarchy, the EFM32G842F128-QFP64 is an MCU, a semiconductor, and a member of the Silicon Labs EFM32 Gecko family. Its low-energy platform supports fast wake-up behavior and energy-saving modes for systems that spend substantial time sleeping. The device includes 128 kB of Flash for firmware and 16 kB of RAM for working data. Three 16-bit timers provide timing resources for periodic control, input capture, output compare, and other time-based functions. Its 53 digital I/O pins support connections to sensors, displays, communication peripherals, and control logic, while the 32 MHz Cortex-M3 core provides useful processing headroom for protocol handling and supervisory tasks. The EFM32G platform emphasizes integration and energy efficiency. According to the Silicon Labs EFM32G datasheet, Gecko devices can consume as little as 0.6 microamps in Stop mode and approximately 180 microamps per MHz in Run mode. These figures make the family relevant to battery-powered instrumentation, portable measurement equipment, industrial controls, and connected sensor nodes where average energy consumption matters as much as peak processing speed. Typical applications include low-power sensor nodes, industrial meters, portable health and wellness devices, connected building equipment, and compact consumer products. The 64-TQFP package exposes more I/O than smaller packages and remains practical for automated assembly. Designers should implement the manufacturer's recommended decoupling, oscillator, reset, and programming connections before deploying the MCU in production. The main design trade-off is Flash capacity versus alternatives with less memory. Select the 128 kB version when application firmware, boot code, data tables, and future updates require ample program storage. The 64-TQFP outline also demands more PCB area than a 32-pin or 48-pin package, but it reduces the need for an external I/O expander and supports more peripheral connections. This product record combines the manufacturer's operating characteristics with practical application guidance, package-aware comparison information, and direct sourcing through the Request a Quote form on this page. It is designed to help engineers evaluate memory, I/O capacity, low-power behavior, and footprint before committing the EFM32G842F128-QFP64 to a new embedded design.

詢價 聯絡我們
EFM32G842F32-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32G842F32-QFP64

EFM32G842F32-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32G842F32-QFP64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB of Flash memory, 8 kB of RAM, and 53 digital I/O pins in a 64-pin TQFP package. Its combination of low-power design, fast wake-up capability, and energy-saving operating modes targets embedded systems where battery life and deterministic control are important. A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripherals, and I/O into one package. The EFM32G842 belongs to the EFM32 Gecko family, which combines an ARM Cortex-M3 processor with energy-management hardware for low-power embedded control. This places it in the hierarchy of embedded microcontroller, 32-bit MCU, ARM Cortex-M3 processor, and semiconductor device. The device provides 32 kB Flash for program storage and 8 kB RAM for working data. The verified manufacturer information also identifies three 16-bit timers and 53 digital I/O pins. The 32 MHz CPU supports responsive control, while low-energy modes and fast wake-up behavior can reduce inactive-system power. Its 2.5 V and 3.3 V supply references are identified in the verified distributor material. The EFM32G842F32-QFP64 is suited to energy-sensitive embedded products, including sensor nodes, industrial monitoring equipment, portable instrumentation, and connected low-power systems. Its timer resources can support periodic measurement, motor or actuator timing, and control-loop tasks. The digital I/O count provides flexibility for buttons, displays, sensors, relays, and communications peripherals, subject to the device's electrical and multiplexing limitations. For PCB design, preserve the exact 64-pin TQFP footprint and verify the complete manufacturer pin assignment before routing. Pay particular attention to supply decoupling, ground-return paths, exposed thermal behavior, and any pins assigned to debug, programming, reset, or alternate functions. Firmware should use the Silicon Labs device support configuration for the exact MPN. This product data combines the verified Silicon Labs device description, distributor specifications, package information, lifecycle-related source material, and application-oriented guidance. It is intended to support initial design review, sourcing, and comparison; final production decisions should be checked against the latest manufacturer datasheet and authorized distribution records. This page synthesizes the supplied manufacturer and distributor information with practical selection context. Because no verified price, detailed timing specification, pin table, or approved cross-brand substitute was supplied, those fields are marked as unavailable rather than inferred.

詢價 聯絡我們
EFM32G842F64-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32G842F64-QFP64

EFM32G842F64-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32G842F64-QFP64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 64 kB of Flash memory and 16 kB of RAM in a 64-TQFP 10 mm × 10 mm package. The device provides 53 digital I/O pins and three 16-bit timers, combining general-purpose embedded control with low-power operation for energy-sensitive equipment. A microcontroller is a compact integrated circuit containing a processor core, memory, peripherals, and I/O. The EFM32G842 belongs to the EFM32 Gecko family and uses the ARM Cortex-M3 RISC core, placing it in the hierarchy MCU → 32-bit microcontroller → embedded processor → semiconductor. Its low-energy architecture, fast wake-up behavior, and energy-saving modes make it suitable for systems that spend substantial time idle or operate from limited power budgets. Verified features include a 32 MHz operating speed, 64 kB Flash, 16 kB RAM, 53 digital I/O pins, and three 16-bit timers. The 1.98 V to 3.8 V supply range supports 2.5 V and 3.3 V system designs. The LCD, AES, and USB-related ecosystem description shown by distributor listings makes the device relevant to human-interface, secure accessory, and connected embedded applications, while the 64-pin package provides a substantial peripheral-routing option for mixed-signal control boards. The Gecko platform emphasizes fast startup and low-energy execution rather than only peak processing speed. This is valuable in portable instruments, battery-powered sensors, industrial controls, and USB peripherals where the average current between activity periods can determine battery life. Firmware should therefore use the device's sleep and wake behavior deliberately rather than treating the 32 MHz CPU frequency as a continuous-power requirement. Typical applications include energy-harvesting sensors, compact industrial controllers, USB-connected human-interface devices, secure embedded accessories, and low-power monitoring systems. The 53 digital I/O pins are useful for status indicators, buttons, relays, displays, and external interface signals, while the timers support periodic sensing, motor timing, or control-loop tasks. PCB design should preserve short, clean return paths around the MCU and decoupling connections. Follow the manufacturer datasheet for the exact pin names, exposed pad requirements, crystal requirements, and decoupling network. Do not assume that another 64-TQFP MCU is interchangeable solely because its package matches; peripheral mapping, voltage tolerance, firmware support, and pin function must be checked before replacement. This page consolidates verified manufacturer and distributor information, distinguishes the target from unverified alternatives, and adds procurement and design guidance that is not normally present in a basic distributor listing.

詢價 聯絡我們
EFM32G880F32-QFP100 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32G880F32-QFP100

EFM32G880F32-QFP100 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32G880F32-QFP100 is a 32-bit ARM Cortex-M3 Gecko microcontroller with a maximum clock speed of 32 MHz, 32 kB of Flash memory, and 8 kB of RAM, packaged in a 100-LQFP 14 mm x 14 mm surface-mount package. It provides 86 digital I/O pins and three 16-bit timers, making it suitable for connected control systems that require substantial peripheral connectivity in a relatively compact package. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor designed for real-time control, sensor handling, communications, and human-interface applications. Within the product hierarchy, the EFM32G880 belongs to the Gecko MCU family and combines a general-purpose processor with low-power operating techniques, fast wake-up behavior, and energy-saving modes for energy-sensitive equipment. The EFM32G880F32-QFP100 integrates 32 kB Flash, 8 kB RAM, 86 digital I/O pins, and three 16-bit timers. Its operating voltage range is 1.98 V to 3.8 V, while its maximum CPU frequency is 32 MHz. The manufacturer identifies the device for applications requiring secure data processing, AES encryption support, and graphics or LCD-oriented functionality, including support for a 4 x 40 LCD. The Gecko low-power architecture is central to the device's value in embedded systems. Low-energy techniques and energy-saving modes allow the MCU to reduce active consumption during idle intervals, while fast wake-up behavior supports responsive event-driven designs. Developers can use the Cortex-M3 instruction set and integrated peripherals to consolidate control, communications, display handling, and data acquisition onto one device rather than distributing those tasks among multiple discrete components. Typical applications include industrial sensor nodes, building automation controllers, portable measurement instruments, medical monitoring equipment, graphical user-interface controllers, and connected energy-management products. The 86 digital I/O pins are especially useful where an application must connect discrete sensors, actuators, buttons, indicators, or external interface devices while preserving a high pin count for direct PCB routing. When laying out a board, assign all 100 package pins by consulting the manufacturer pin-description table and account for the exposed supply, ground, debugging, and peripheral functions shown there. Confirm operating conditions, voltage rails, and peripheral multiplexing against the manufacturer datasheet before finalizing the schematic and footprint. The 100-LQFP package supports a 14 mm x 14 mm land pattern but requires careful assembly planning because of its fine pitch. This page combines manufacturer specifications, sourced product information, application guidance, pin-package considerations, and engineering-focused comparisons to support component selection and PCB planning. It also identifies the limitations of available drop-in alternatives so engineers can distinguish electrically similar replacements from verified, package-compatible choices.

詢價 聯絡我們
EFM32G890F32-BGA112 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32G890F32-BGA112

EFM32G890F32-BGA112 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32G890F32-BGA112 is a 32-bit ARM Cortex-M3 Gecko microcontroller operating at up to 32 MHz, with 32 KB of Flash memory, 8 KB of RAM, and 90 digital I/O pins in a 112-BGA package measuring 10 mm by 10 mm. The device is designed around the EFM32G energy-management platform, which combines low-power operation, fast wake-up behavior, and autonomous peripheral activity. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals such as serial interfaces, timers, and analog blocks. Within the product hierarchy, the EFM32G890F32 belongs to the ARM Cortex-M3 microcontroller class, the EFM32 Gecko family, and the broader embedded-control semiconductor category. Its combination of a 32-bit processor and low-power peripherals makes it suitable for battery-operated equipment and other embedded systems that must process data while limiting energy use. The EFM32G890F32-BGA112 provides 32 KB of Flash program memory and 8 KB of SRAM, supporting firmware storage, working memory, and application state. Its listed digital interface resources include 90 I/O pins, three 16-bit timers, EBI/EMI, I2C, IrDA, SPI, SmartCard, and UART/USART connectivity. These interfaces allow the MCU to communicate with sensors, displays, external nonvolatile memory, transceivers, and other embedded peripherals without requiring multiple companion controllers. Silicon Labs describes the EFM32G family as an energy-oriented platform with autonomous peripherals and low current draw in both active and sleep operating states. The family data sheet states that EFM32G devices can consume as little as 0.6 microamps in Stop mode and 180 microamps per megahertz in Run mode. These figures characterize the broader family and should be checked against the exact operating configuration, clock rate, and peripheral activity used in a finished design. Typical uses include industrial sensor nodes, compact wireless-control equipment, battery-powered instruments, building-automation endpoints, wearable accessories, and low-power IoT controllers. In each case, the MCU can execute control logic while using its low-energy modes between external events. The 112-BGA package also supports compact PCB designs, although its fine pitch requires careful assembly planning, inspection access, and multilayer board construction. Design the power rails and decoupling around the 3.3 V-class operating environment described for this device family, and use the pin-description tables in the manufacturer datasheet when assigning the 90 digital I/O pins. Confirm package ball assignments, exposed-pad treatment, supported supply tolerances, and peripheral multiplexing before release because those details are not reproduced in the product listing. This product record combines the exact ordering information, memory configuration, package dimensions, core speed, interface list, and low-power family characteristics with practical considerations for PCB layout, firmware sizing, and sourcing. It also provides same-package alternatives and a parameter-by-parameter comparison so engineers can distinguish flash-capacity changes from true pin-compatible design choices.

詢價 聯絡我們
EFM32G890F64-BGA112 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32G890F64-BGA112

EFM32G890F64-BGA112 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32G890F64-BGA112 is a 32-bit ARM Cortex-M3 Gecko microcontroller with a 32 MHz operating speed, 64 KB of Flash memory, 16 KB of RAM, and 90 digital I/O pins in a 112-BGA package measuring 10 mm by 10 mm. Its low-power architecture, fast wake-up capability, and energy-saving modes target battery-operated and energy-sensitive embedded systems. A microcontroller, or MCU, integrates a processor core, memory, peripherals, and interfaces into one compact device. The EFM32G890 belongs to the Gecko family of 32-bit embedded processors within Silicon Labs' broader MCU portfolio. MCUs are commonly used for sensing, control, communications, and user-interface tasks where deterministic real-time operation, low standby power, and a compact footprint are more important than a desktop-class processor. The EFM32G890F64-BGA112 combines 64 KB of Flash with 16 KB of SRAM and three 16-bit timers. Its peripheral set includes a 4-by-40 LCD interface and AES hardware, while the 90 digital I/O pins support multiple external devices on a compact assembly. A maximum clock rate of 32 MHz provides useful processing headroom for protocol handling, control loops, and system management without requiring a separate processor. The Cortex-M3 core uses the Arm Thumb instruction set and supports efficient event-driven firmware. Silicon Labs' low-energy techniques include energy-saving modes and fast wake-up behavior, which help battery-operated equipment remain responsive without keeping the core active continuously. These characteristics make the device suitable for sensors, portable instruments, industrial nodes, and compact human-machine-interface controllers. Typical applications include low-power sensor nodes, energy meters, industrial monitoring equipment, portable measurement devices, security and access-control modules, and LCD-driven control panels. Its 112-BGA footprint offers fine-pitch routing opportunities, while the large I/O count reduces the need for external I/O expanders in connected embedded designs. PCB implementation requires careful BGA layout, controlled impedance for sensitive signals, and decoupling close to the supply pins. Follow Silicon Labs hardware-design guidance for EFM32G890 layouts, validate BGA assembly capability, and keep high-current return paths compact. This page also organizes package details, replacement options, application guidance, and design considerations for faster engineering evaluation.

詢價 聯絡我們
EFM32GG11B420F2048GQ100-B - 72MHz ARM Cortex-M4 MCU 2MB Flash | Silicon Labs
EFM32GG11B420F2048GQ100-B

EFM32GG11B420F2048GQ100-B - 72MHz ARM Cortex-M4 MCU 2MB Flash | Silicon Labs

The Silicon Labs EFM32GG11B420F2048GQ100-B is an ARM Cortex-M4 microcontroller from the EFM32 Giant Gecko Series 1 family, featuring a 32-bit processor core running at up to 72 MHz with DSP instruction support and a single-precision Floating Point Unit (FPU). It integrates 2 MB (2048 kB) of Flash and 512 kB of RAM, includes 83 digital I/O pins, 7× 16-bit timer/counters, USB, LCD controller, and a hardware cryptographic engine (AES, ECC, SHA, TRNG) in a 100-pin TQFP (14×14 mm) package. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed for embedded systems that require deterministic real-time response, low power consumption, and digital signal processing. The Giant Gecko family extends this with Silicon Labs' energy-friendliness techniques: 80 µA/MHz active current (EM0), 2.1 µA EM2 Deep Sleep current with 16 kB RAM retention and RTCC running, fast wake-up times, and a flexible Energy Management System (EMU). These characteristics position the part within the broader category of low-power 32-bit microcontrollers alongside competing Cortex-M4/M4F parts from STMicroelectronics, NXP, and Microchip. Key differentiating features include crystal-free low-energy USB, 5 V tolerant GPIO, robust capacitive touch sense, a Memory Protection Unit (MPU), Wake-up Interrupt Controller (WIC), and footprint compatibility with select EFM32 packages that simplify migration. The integrated peripheral reflex system and low-energy peripherals enable autonomous operation without CPU intervention, extending battery life in energy-harvesting and IoT applications. The part operates from 1.8 V to 3.6 V and supports the industrial temperature range of -40°C to +85°C. With 2048 kB of Flash and 512 kB of RAM, it is the highest-memory variant of the GG11 family and is suitable for complex GUI stacks, wireless protocol stacks (Zigbee, Thread, BLE co-processors), asset tracking firmware, and industrial HMI designs that demand both graphics and connectivity. Typical applications include IoT edge nodes, smart metering, building automation, industrial control panels with LCD, USB peripherals, and portable medical devices. The combination of USB, LCD, and hardware crypto on a single die enables compact, BOM-optimized designs. When designing with this MCU, allocate the 83 GPIO pins across your peripheral set early in the design phase; ensure the 1 µF + 100 nF decoupling pair is placed within 3 mm of the VDD pins, and route the USB DP/DM pair with 90 Ω differential impedance. Use Simplicity Studio and the Hardware Configurator tool to assign peripherals to pins and generate production-ready initialization code. This page synthesizes distributor pricing, drop-in GG11 alternatives, and practical design notes not found in the manufacturer datasheet to help engineers select and qualify the part faster.

詢價 聯絡我們
EFM32GG11B520F2048IM64-B - 72MHz ARM Cortex-M4 MCU 2MB Flash
EFM32GG11B520F2048IM64-B

EFM32GG11B520F2048IM64-B - 72MHz ARM Cortex-M4 MCU 2MB Flash

Silicon Labs EFM32GG11B520F2048IM64-B is a 32-bit microcontroller IC 36-A 32-bit ARM Cortex-M4 Giant Gecko S1 microcontroller running at 72 MHz, integrating 2 MB (2M x 8) of flash and 512 kB of RAM in a 64-pin QFN (9x9) package. It supports 1.8V to 3.8V supply, 53 digital I/O pins, 7 16-bit timer/counters, and energy-aware peripherals including LESENSE, IADC, and hardware crypto. The Giant Gecko family is engineered for ultra-low-power applications with fast wake-up times and energy-saving modes. An ARM Cortex-M4 microcontroller (MCU) is a 32-bit microcontroller unit based on the ARM Cortex-M4 processor core with DSP instructions and optional FPU, offering deterministic real-time performance at MHz clock speeds while consuming only tens of microamps per MHz in active mode. It fits within the hierarchy: Cortex-M4 MCU -> ARM-based microcontroller -> embedded microcontroller -> semiconductor. Battery voltage is critical for portable, energy-sensitive designs where sleep current dominates battery life. Key features include 2 MB flash, 512 kB RAM, 53 GPIO, hardware AES/SHA crypto accelerator, segment LCD controller, USB, CAN, EBI and other peripherals, 39 C/W thermal resistance (typical QFN-64), -40C to +125C industrial temperature grade, and multiple low-energy modes down to sub-uA sleep currents. The B-grade part variant features extended industrial temperature range and is supplied on tape and reel. The architecture combines ARM Cortex-M4 core with autonomous low-energy peripherals (LETIMER, RTCC, IADC, LESENSE) that operate without waking the CPU. The 2 MB flash supports over-the-air (OTA) firmware updates via dual-bank memory mapping, while the LCD controller enables direct drive of segmented displays without external driver ICs, reducing BOM cost and PCB area. Typical applications include battery-powered IoT sensor nodes, smart energy metering with ESE AMR and LCD displays, industrial HMI panels with capacitive touch, connected lighting with wireless-segment control, and asset tracking with GPS/GNSS. The EFM32GG11B520F2048IM64-B is particularly well-suited to designs that require large memory for firmware/RF stacks while maintaining years of battery life. When designing with this device, ensure adequate decoupling on VDD (1.8-3.8V) with 100 nF ceramic capacitors per supply pin and consider ground plane continuity under the QFN exposed pad for thermal dissipation. Order chips at tape and reel quantities via authorized distributors. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
EFM32GG230F1024G-E-QFN64 - 48MHz ARM Cortex-M3 MCU, 1MB Flash | Silicon Labs
EFM32GG230F1024G-E-QFN64

EFM32GG230F1024G-E-QFN64 - 48MHz ARM Cortex-M3 MCU, 1MB Flash | Silicon Labs

The Silicon Labs EFM32GG230F1024G-E-QFN64 is an ARM Cortex-M3 Giant Gecko microcontroller IC running at 48 MHz with 1 MB (1M x 8) of Flash and 128 KB of RAM, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. It is a 32-bit single-core MCU engineered for energy-sensitive applications, offering autonomous peripherals, AES hardware encryption, and rich analog integration while consuming as little as 0.6 uA in Stop (EM2 Deep Sleep) mode and 180 uA/MHz in Run mode. What is a 32-bit low-power microcontroller? A microcontroller (MCU) is a system-on-chip that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals (timers, ADC, communication interfaces) into a single device. Low-power MCUs extend this concept by including multiple energy modes (Run, Sleep, Stop, EM4 shutoff), fast wake-up times, and peripheral reflex logic that lets timers and sensor interfaces operate without waking the CPU. The EFM32GG Giant Gecko family sits in the hierarchy as: Cortex-M3 MCU -> ARM 32-bit MCU -> low-energy MCU -> embedded microcontroller -> semiconductor IC. Key features include 1024 KB Flash, 128 KB RAM, 56 digital I/O pins, 4 x 16-bit timers, AES-128/256 hardware crypto accelerator, and a peripheral reflex system. The wide supply voltage range of 1.85 V to 3.8 V supports both single-cell Li-ion battery applications and 3.3 V industrial rails, while integrated LDO and DC-DC support enables flexible power tree design with sub-microamp sleep currents critical for battery-powered IoT endpoints. The Giant Gecko architecture pairs the Cortex-M3 core with Silicon Labs' LESENSE, LETIMER, RTCC, and AUTOSELECT peripherals, allowing sensor interfaces and GPIO events to operate autonomously while the CPU remains in deep sleep. Hardware AES acceleration and a True Random Number Generator (TRNG) target secure connected applications. The 9x9 mm QFN-64 footprint with exposed pad provides 56 usable GPIO - generous for a small-outline MCU package. Typical applications include battery-powered IoT sensors, smart energy metering, wireless sensor nodes, industrial HMI controllers, and home automation gateways where years of battery life and rich peripheral integration are required. When designing with this part, place a 1 uF X7R bypass capacitor adjacent to each VDD pin and a 4.7 uF bulk capacitor near the package. The QFN-64 thermal pad must be soldered to a continuous ground pour for both electrical ground and thermal dissipation (theta_JA typically 28 C/W on a 4-layer JEDEC JESD51-7 board). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

詢價 聯絡我們
EFM32GG290F1024-BGA112 - 32-bit ARM Cortex-M3 MCU, 1MB Flash | Silicon Labs
EFM32GG290F1024-BGA112

EFM32GG290F1024-BGA112 - 32-bit ARM Cortex-M3 MCU, 1MB Flash | Silicon Labs

The Silicon Labs EFM32GG290F1024-BGA112 is an ARM Cortex-M3 based 32-bit microcontroller from the Giant Gecko family, integrating 1024 kB of Flash and 128 kB of RAM, with a CPU core capable of up to 48 MHz operation (1.25 DMIPS/MHz). The device is housed in a 112-ball BGA package (10x10 mm) and offers 90 digital I/O pins, making it one of the highest-density members of the EFM32 Giant Gecko line. An ARM Cortex-M3 microcontroller (MCU) is a 32-bit RISC processor core designed for embedded applications that need deterministic real-time behavior, low power consumption, and a Thumb-2 instruction mix that balances code density with computational throughput. Cortex-M3 cores are widely deployed in IoT, sensor hubs, industrial controllers, and human-interface products, and are positioned hierarchically as: ARM Cortex-M3 -> 32-bit MCU -> microcontroller -> semiconductor. The EFM32 Giant Gecko series extends this architecture with Silicon Labs' proprietary low-energy peripherals, fast wake-up time from sleep states, and a peripheral reflex system that lets timers, ADCs, and GPIO events trigger DMA transfers without CPU intervention. Key differentiating features include 1 MB of on-chip Flash and 128 kB of SRAM, hardware AES encryption, a 12-bit ADC, multiple USART/UART/SPI/I2C peripherals, and a 4x16-bit timer/counter array. The 90 GPIO count and 112-ball BGA footprint make it a strong fit for industrial gateways and high-pin-count sensor hubs. The Cortex-M3 core also integrates a Memory Protection Unit (MPU) supporting up to 8 segments and a Wake-up Interrupt Controller for handling interrupts from sleep. Technically, the part operates from a single 1.98 V to 3.8 V supply, is qualified over -40 C to +85 C, and supports an integrated LDO and DC-DC regulator for core power. The energy-friendly design lets the device drop below 1 uA in deep-sleep modes while retaining RTC and interrupt capability, addressing battery-operated applications where both processing power and standby current matter. Typical applications include industrial IoT gateways, smart metering, home and building automation, asset tracking, wireless sensor nodes, security panels, and connected health devices. The 1 MB Flash tier also serves as a host for larger protocol stacks (Thread, ZigBee, BLE via co-processor) where ample code space is required. When designing with the EFM32GG290F1024-BGA112, plan PCB escape routing for the 112-ball BGA carefully - the 0.8 mm ball pitch demands 4 or more PCB layers with microvia stack-ups. Decoupling should follow the datasheet's reference layout, and the debug SWD pins (SWDIO/SWCLK) must be brought out to a standard ARM Cortex debug header for programming. This page synthesizes distributor pricing, drop-in BGA112 alternatives, and practical layout guidance not found in the manufacturer datasheet alone, helping engineers select the right Giant Gecko variant for high-density, low-energy embedded designs.

詢價 聯絡我們
EFM32GG330F1024-QFN64 - 48MHz Cortex-M3 Giant Gecko MCU | Silicon Labs
EFM32GG330F1024-QFN64

EFM32GG330F1024-QFN64 - 48MHz Cortex-M3 Giant Gecko MCU | Silicon Labs

The Silicon Labs EFM32GG330F1024-QFN64 is an ARM Cortex-M3 32-bit microcontroller in the Giant Gecko family, delivering up to 48 MHz CPU clock and housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. The device integrates 1024 kB of flash and 128 kB of RAM, 53 digital I/O pins, and a peripheral set including a USB 2.0 full-speed controller, AES-128/256 hardware crypto accelerator, 4 x 16-bit timers, and a 12-bit ADC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash), working memory (RAM), and a configurable set of analog and digital peripherals. In the taxonomy of embedded silicon, an MCU sits below microprocessors (MPUs, which require external memory) and above general-purpose logic ICs; the Giant Gecko specifically belongs to the energy-friendly EFM32 family, which sits inside the broader Cortex-M3 ecosystem (ARM Cortex-M -> 32-bit MCU -> embedded controller -> semiconductor). Silicon Labs' EFM32 line is known for aggressive low-energy techniques, fast wake-up from sleep, and rich peripherals aimed at battery-powered and energy-harvesting applications. Key features include hardware AES crypto, USB device controller with on-chip transceiver, configurable peripherals routed through Silicon Labs' Peripheral Reflex System (PRS), and a low-energy RTC with calendar mode. The 64-pin QFN package (9x9 mm body, 0.5 mm pitch, exposed pad) provides 53 general-purpose I/Os with configurable push-pull, open-drain, and pull resistors. CoreMark performance is approximately 1.25 DMIPS/MHz, and the energy modes EM0-EM4 enable sub-microamp sleep with <2 microsecond wake-up. Architecturally, the EFM32GG330F1024 pairs a Cortex-M3 core (with MPU, WIC, NVIC) with 1024 kB flash (with cache) and 128 kB SRAM, plus dedicated crypto and DMA blocks. The peripheral reflex system allows peripherals to interact without CPU intervention, freeing the core for application logic. Energy Mode 4 (EM4) shuts down most of the chip but retains a single wake-up pin and RAM retention, achieving the lowest quiescent current in the family. Typical applications include energy-harvesting wireless sensor nodes, USB-powered smart meters, secure connected home gateways, battery-powered industrial sensors, and low-power medical wearables. The 1 MB flash supports over-the-air (OTA) firmware update staging for connected devices requiring field-upgradable code. When designing with this device, route the exposed pad (EP) to a continuous ground pour with multiple vias for thermal dissipation and low-impedance ground return. Decouple VDD and VDDX with 100 nF X7R ceramic caps placed within 2 mm of each supply pin. The QFN package requires precise PCB land pattern and reflow profile per IPC-7351; moisture sensitivity level (MSL) handling per J-STD-033 is required during assembly. This page synthesizes distributor pricing, drop-in same-package alternatives, AEO-optimized FAQ, and practical layout notes not consolidated on the Silicon Labs product page.

詢價 聯絡我們
EFM32GG395F1024G-E-BGA120 - 48MHz Cortex-M3 MCU, 1MB Flash | Silicon Labs
EFM32GG395F1024G-E-BGA120

EFM32GG395F1024G-E-BGA120 - 48MHz Cortex-M3 MCU, 1MB Flash | Silicon Labs

The Silicon Labs EFM32GG395F1024G-E-BGA120 is an ARM Cortex-M3 based Giant Gecko microcontroller delivering 48 MHz CPU performance with 1 MB Flash and 128 KB RAM, housed in a 120-ball BGA (7x7 mm) package. It features an integrated USB 2.0 Full-Speed controller, AES encryption engine, hardware cryptographic accelerator, and the patented EFM32 low-energy peripheral architecture. The wide supply range of 1.98 V to 3.8 V supports single-cell Li-ion battery operation and USB-powered designs. A 32-bit microcontroller (MCU) is an integrated processor core, memory, peripherals, and I/O in a single chip. The Cortex-M3 is an ARM core with Thumb-2 instruction set, hardware divide, and deterministic interrupt handling, optimized for embedded deterministic applications. Within the MCU taxonomy it sits under Cortex-M3 -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor. The Giant Gecko family further emphasizes high-memory variants (up to 1 MB GB) while preserving the EFM32 ultra-low-power DNA. Key features include 93 digital I/O pins, 4 x 16-bit timer/counter blocks, 12-bit ADC and DAC channels, 4 USART, 2 I2C, 2 USB x Low Voltage, AES-128/256 hardware accelerator, true random number generator, 4 x 16-bit PWM outputs, and a low-energy RTC. The integrated LCD controller supports up to 8 x 36 segments without external drivers. Energy-saving modes deliver a sub-microsecond wake-up time and EM0/EM2/EM3/EM4 modes enabling deep-sleep currents below 1 uA. The debug hardware from Cortex-M3 includes Serial Wire Debug (SWD), Embedded Trace Macrocell (ETM), and Serial Wire Viewer (SWV). Architecturally, the EFM32GG395F1024G-E-BGA120 uses a Cortex-M3 Harvard architecture with separate I-code and D-code buses, 4 GB Flash memory per function, 1 MB single-bank Flash, and peripheral reflex system allowing autonomous peripheral-to-peripheral DMA without CPU intervention. This enables complex power-aware tasks to run while the CPU stays in EM2 sleep. The hardware AES engine performs AES-128/256 encryption in single clock cycles, and the TRNG provides a NIST-compliant entropy source for cryptographic applications. Typical applications include USB HID peripheral, smart energy metering, building automation, smart sensor nodes, industrial control, low-power wireless sensor networks, wearable fitness devices, and battery-powered IoT HVAC controllers. The integrated USB peripheral supports both device and host modes, making the part well suited to USB-equipped IoT devices. The Giant Gecko high-memory configuration (1 MB GB) enables rich HMI interfaces with embedded graphics or USB device stacks. The wide GPIO count of 93 supports multi-segment LCD or keypad-driven products. A common use is a USB dongle for secure token provisioning and key exchange. When designing with this MCU, the BGA-120 package requires careful PCB layout with at least 4 routing layers, controlled-impedance traces for USB DP/DM, and a solid ground plane for analog performance. Use a 1 uF decoupling capacitor per VDD pin, place a 32.768 kHz crystal on the update output, and route the SWD lines (SWDIO/SWDCLK) as a 2-wire debug interface with series-reset 10 kohm pull-up on SWDIO. The exposed thermal pad must be soldered to the PCB for mechanical reliability and thermal dissipation. For USB operation, the VBUS pin requires a 5 V to 3.3 V regulator on the GB85. This page synthesizes distributor pricing, drop-in same-family alternatives, USB peripheral design references, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
EFM32GG395F1024G-E-BGA120R - 48MHz ARM Cortex-M3 Giant Gecko MCU | Silicon Labs
EFM32GG395F1024G-E-BGA120R

EFM32GG395F1024G-E-BGA120R - 48MHz ARM Cortex-M3 Giant Gecko MCU | Silicon Labs

The Silicon Labs EFM32GG395F1024G-E-BGA120R is a 32-bit ARM Cortex-M3 Giant Gecko microcontroller (MCU) delivering up to 48 MHz core performance with 1 MB Flash and 128 kB RAM, housed in a 120-ball BGA (7x7 mm) package. It integrates USB, AES hardware encryption, and a rich peripheral set designed for energy-sensitive connected applications. The supply voltage range is 1.98 V to 3.8 V and the device supports an operating temperature range of -40 C to +85 C. What is a low-power 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer integrating a CPU core, volatile and non-volatile memory, and programmable peripherals. Low-power MCUs extend this with multiple sleep modes, fast wake-up times, and event-driven peripherals (such as the Peripheral Reflex System on EFM32) that let the CPU stay asleep while peripherals handle I/O. The Giant Gecko family sits in the hierarchy: ARM Cortex-M3 core -> 32-bit MCU -> low-energy MCU -> embedded microcontroller -> semiconductor. This architecture is widely used in battery-powered IoT nodes, sensor hubs, and industrial controls where average current (uA range) and standby time dominate. Key features include 1 MB Flash (1M x 8), 128 kB SRAM, 93 digital I/O pins, four 16-bit timer/counters, two 12-bit ADC and DAC blocks, USB, AES-128/256, and a hardware crypto accelerator. The Giant Gecko line also adds an LCD controller, backup RTC domain with its own voltage regulator, and multiple low-energy peripherals (LETIMER, LESENSE, LEUART, RTC). On-chip peripherals are interconnected through the Peripheral Reflex System (PRS) for hardware-driven, software-free signaling between modules. The EFM32GG395F1024G-E-BGA120R is built on a 90 nm CMOS low-leakage process and uses Silicon Labs' LESENSE, PRS, and energy-management unit to deliver sub-uA sleep current with 2 us wake-up time. This makes the device well suited to interrupt-driven event processing rather than continuous polling. The integrated AES hardware block accelerates encrypted communication without burdening the Cortex-M3 core. Typical applications include IoT edge nodes, USB-connected smart sensors, energy-harvesting wireless sensor hubs, industrial HMI panels with LCD, secure connected medical devices, and building-automation controllers. The Giant Gecko family is broadly used in any design that needs both USB device/host connectivity and low standby power. When designing with this device, allocate sufficient PCB area for BGA fan-out and via-in-pad (the 120-ball 7x7 mm BGA has 0.5 mm pitch) and provide a clean 3.3 V rail with bulk + bypass decoupling per Silicon Labs reference designs. Verify pinout against the manufacturer datasheet, since BGA ball mapping is not interchangeable with QFP variants in the same family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and qualify the EFM32GG395F1024G-E-BGA120R for production.

詢價 聯絡我們
EFM32HG222F64G-C-QFP48R - 25MHz ARM Cortex-M0+ MCU | Silicon Labs
EFM32HG222F64G-C-QFP48R

EFM32HG222F64G-C-QFP48R - 25MHz ARM Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32HG222F64G-C-QFP48R is an ultra-low-power ARM Cortex-M0+ microcontroller from the Happy Gecko family, delivering 25 MHz core performance with 64 KB Flash and 8 KB RAM in a 48-pin TQFP (7x7 mm) package. It targets USB-enabled, energy-sensitive embedded applications where battery life and rapid wake-up time dominate the design trade-off. An ARM Cortex-M0+ microcontroller (MCU) is a 32-bit reduced instruction set processor core from ARM Holdings, designed for lowest active power and smallest silicon footprint among the Cortex-M family. The Cortex-M0+ sits within a broader hierarchy: ARM Cortex-M -> 32-bit MCU core -> microcontroller -> embedded system-on-chip. The Happy Gecko family extends this baseline with Silicon Labs' proprietary energy modes, autonomous I/O handling, and an integrated USB 2.0 Full-Speed device peripheral, making it well suited to connected sensor nodes and human-interface devices. The EFM32HG222F64G-C-QFP48R operates from a 1.98 V to 3.8 V supply, consumes 127 uA/MHz in Run mode and as little as 0.6 uA in Stop mode (per the Silicon Labs EFM32HG datasheet), and offers 37 digital I/O pins, 3 x 16-bit timers, an ADC, AES accelerator, and integrated USB. The TQFP-48 package (7x7 mm body) supports standard surface-mount assembly and provides 37 usable GPIO signals after USB and ground pins are allocated. Architecturally, the device pairs the Cortex-M0+ core with a low-leakage process node, peripheral reflex system, and a wide range of autonomous peripherals that continue to operate while the core sleeps. This combination allows the MCU to wake on an event, capture data, and return to deep sleep without CPU intervention - a critical capability for coin-cell and energy-harvesting designs. Typical applications include USB human-interface devices such as wireless dongles, HID peripherals, and connected sensors, as well as battery-powered IoT nodes, wearable health monitors, smart metering endpoints, and industrial sensor transmitters. The integrated USB 2.0 Full-Speed device controller removes the cost of an external PHY. When designing with this part, allocate adequate PCB area for the USB DP/DM traces, follow the USB 2.0 impedance guideline of 90 ohms differential, and place the decoupling capacitor network (typically 100 nF + 4.7 uF bulk) within a few millimetres of the VDD pin. The "R" suffix indicates Tape & Reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB and low-power design guidance that complements the manufacturer datasheet.

詢價 聯絡我們
EFM32LG230F256G-E-QFN64 - 48MHz 32-bit ARM Cortex-M3 MCU | Silicon Labs
EFM32LG230F256G-E-QFN64

EFM32LG230F256G-E-QFN64 - 48MHz 32-bit ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32LG230F256G-E-QFN64 is an ARM Cortex-M3 based 32-bit Leopard Gecko microcontroller delivering 48 MHz CPU performance with 256 KB Flash and 32 KB RAM in a 64-pin QFN (9x9 mm) package. The device is designed for ultra-low-power embedded applications, consuming as little as 0.65 microampere in Stop mode and 211 microampere/MHz in Run mode, while integrating autonomous peripherals and a hardware 1-wire debug port. Sixty-four general-purpose I/O pins support flexible mixed-signal interfacing for sensors, displays, and communication buses. A microcontroller (MCU) is a single integrated semiconductor device that contains a CPU core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals such as timers, ADC/DAC blocks, communication interfaces, and GPIO. Within the broader embedded computing taxonomy, MCUs belong to the system-on-chip hyperplane - integrating compute (control, timing), analog/mem (memory hierarchy), energy efficiency (low-power modes), and connectivity (UART, SPI, I2C, USB) on a single die. The Cortex-M3 core implements the Thumb/Thumb-2 instruction set, features hardware integer divide, jitter, and includes a Nested Vectored Interrupt Controller (NVIC) for deterministic interrupt response. EFM32 Leopard Gecko devices add energy-aware peripherals that can operate autonomously while the CPU is asleep. Key features of the EFM32LG230F256G-E-QFN64 include 256 KB Flash program memory, 32 KB SRAM, low-energy autonomous peripherals, fast wake-up from sleep modes, brown-out detector, and on-chip temperature sensor. Peripheral highlights include four 16-bit timers, multiple USART/SPI/I2C peripherals, a 12-bit ADC, and a hardware AES accelerator. The wide operating voltage range and low-power architecture allow direct battery operation with years of battery life in duty-cycled applications. Typical use cases are wireless sensor nodes, smart meters, home and building automation, asset tracking, fitness and medical wearables, industrial IoT edge nodes, and battery-powered HMI controllers. Selection guidance: choose this part when you need ARM Cortex-M3 ecosystem maturity combined with Silicon Labs' energy-friendly architecture in a moderate-pin-count QFN package.

詢價 聯絡我們
EFM32LG230F256G-E-QFN64R - 48MHz ARM Cortex-M3 256KB Flash MCU | Silicon Labs
EFM32LG230F256G-E-QFN64R

EFM32LG230F256G-E-QFN64R - 48MHz ARM Cortex-M3 256KB Flash MCU | Silicon Labs

The Silicon Labs EFM32LG230F256G-E-QFN64R is an ultra-low-power ARM Cortex-M3 32-bit microcontroller in the Leopard Gecko family, featuring 256 KB Flash and 32 KB SRAM, running at up to 48 MHz and packaged in a 64-pin QFN (9x9 mm). It is designed for energy-sensitive applications that need Cortex-M3 performance with sub-microamp sleep current. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core from the Cortex-M family of microcontrollers designed by ARM Holdings for embedded applications. The Cortex-M3 implements the Thumb-2 instruction set and includes a Memory Protection Unit, Nested Vectored Interrupt Controller, and optional Wake-up Interrupt Controller. Within the broader taxonomy, the Cortex-M3 belongs to ARM's Cortex-M microcontroller family, which in turn falls under the wider category of 32-bit embedded microcontrollers, mixed-signal semiconductors, and finally integrated circuits. The Leopard Gecko (LG) family extends this core with autonomous low-energy peripherals that can operate while the CPU is asleep. Key features include a 1.25 DMIPS/MHz core delivering up to 60 MHz operation, 256 KB on-chip Flash with 32 KB RAM, 56 digital I/O pins, and rich analog peripherals including a 12-bit 1 Msps ADC, 12-bit DAC, analog comparator, and low-energy sensor-interface. Active mode current is approximately 211 uA/MHz and deep-sleep (Stop mode) current is as low as 0.65 uA, making it ideal for battery-powered products. Communication interfaces include USB 2.0 full-speed, multiple USART/UART, I2C, SPI, and I2S peripherals. A 2-pin Serial Wire Debug interface and Embedded Trace Module (ETM) are included. The architecture combines autonomous peripherals such as the Low Energy Sensor Interface (LESENSE), Peripheral Reflex System (PRS), and hardware crypto (AES) so that events can be processed without waking the CPU. This event-driven design is the core innovation behind the EFM32 family and yields 5-10x longer battery life versus conventional microcontrollers in typical IoT duty cycles. Typical applications include energy-harvesting wireless sensor nodes, battery-powered IoT edge devices, smart metering, wearable health monitors, and industrial alarm panels. The wide 1.98V-3.8V supply range allows direct connection to single-cell lithium, 3V coin cells, or regulated 3.3V rails. When designing with this device, follow Silicon Labs' recommended decoupling and reference layout for the 9x9 mm QFN64 package; the exposed thermal pad must be soldered to the ground plane for electrical and thermal performance. Use Simplicity Studio and the EFM32 CMSIS-pack to leverage the energyAware Designer profiler for optimizing sleep/wake duty cycles. This page synthesizes distributor pricing, drop-in Leopard Gecko / Giant Gecko / Pearl Gecko alternates, and practical design notes that are not aggregated in the manufacturer datasheet.

詢價 聯絡我們
EFM32LG230F64-QFN64 - 48MHz Cortex-M3 MCU | Silicon Labs
EFM32LG230F64-QFN64

EFM32LG230F64-QFN64 - 48MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32LG230F64-QFN64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 48 MHz, with 64 KB of Flash memory, 32 KB of RAM, and a 64-QFN 9 x 9 mm package. It belongs to the EFM32LG Leopard Gecko family, combining an energy-efficient embedded processor with integrated analog, timing, communication, and low-power peripherals for compact embedded systems. A microcontroller is a programmable system-on-chip that combines a CPU core, memory, peripherals, and interface logic on one integrated circuit. The EFM32LG230F64-QFN64 is an ARM Cortex-M3-based MCU in the broader hierarchy of embedded processors, microcontrollers, and semiconductor components. Its 32-bit RISC architecture supports efficient control processing, while the integrated memory and peripherals reduce board area and simplify firmware-driven measurement, communication, and power-management designs. Key device characteristics include a maximum CPU frequency of 48 MHz, 64 KB of Flash program memory, 32 KB of RAM, 56 general-purpose I/O pins, 16 asynchronous external interrupts, and a 12-channel DMA controller. The EFM32LG family is designed for energy-sensitive products and can consume as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode. Its operating supply range is 1.98 V to 3.8 V. The architecture combines the ARM Cortex-M3 processor with the EFM32 energy-management system and autonomous peripherals. Autonomous operation allows selected hardware activities to continue with reduced processor involvement, supporting responsive low-power designs. The Memory Protection Unit supports up to eight memory segments, while the Wake-up Interrupt Controller handles events occurring while the CPU is asleep. These characteristics make the platform suitable for systems that must react quickly while preserving battery life. Typical applications include battery-powered sensor nodes, industrial monitoring equipment, connected accessories, compact control panels, and low-power IoT products. The 48 MHz Cortex-M3 core provides performance for protocol handling, local control, and data processing, while the 12-channel DMA controller reduces processor load during serial transfers. The integrated analog and timing resources also support measurements, waveform generation, and general-purpose embedded control. When laying out a board, place decoupling capacitors close to the supply pins and follow the EFM32LG230 hardware-design guidance for exposed-pad thermal management and signal routing. Confirm the complete pin assignment and exposed-pad connection against the manufacturer datasheet before fabrication. Firmware should also use the documented clock, reset, and low-power procedures to avoid entering an unintended Stop state. This product page consolidates the core electrical and packaging specifications, practical application guidance, verified manufacturer references, and same-footprint ordering alternatives. It also highlights the differences between ordering-code variants and the checks engineers should complete before approving a direct PCB substitution.

詢價 聯絡我們
EFM32LG232F64-QFP64 - 48MHz Cortex-M3 64KB MCU | Silicon Labs
EFM32LG232F64-QFP64

EFM32LG232F64-QFP64 - 48MHz Cortex-M3 64KB MCU | Silicon Labs

Silicon Labs EFM32LG232F64-QFP64 is a 32-bit ARM Cortex-M3 Leopard Gecko microcontroller with a 48 MHz processor, 64 KB of Flash memory, 32 KB of RAM, and a 64-pin TQFP package. It operates from a 1.98 V to 3.8 V supply and includes AES hardware security support. The part combines an efficient Cortex-M3 core with autonomous peripherals and integrated analog functionality for low-power embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry into one device. The EFM32LG belongs to the Leopard Gecko family, a 32-bit ARM Cortex-M3 platform designed for low-power, battery-operated products. Its hierarchy places it among embedded microcontrollers, embedded processors, and energy-conscious embedded semiconductor solutions. The EFM32LG232F64-QFP64 provides 64 KB of Flash memory for firmware and 32 KB of RAM for working data. Its 48 MHz Cortex-M3 core supports general control, monitoring, communications, and signal-processing tasks. The device is specified for operation from 1.98 V to 3.8 V, allowing integration with common low-voltage embedded power rails. Silicon Labs emphasizes low power consumption in the Leopard Gecko family. The EFM32LG data sheet specifies current consumption as low as 0.65 µA in Stop mode and 211 µA/MHz in Run mode. These figures make the MCU suitable for systems where standby current, duty-cycle behavior, and energy efficiency determine the operating-life target. AES support provides hardware-assisted cryptographic operation for designs requiring data protection. Typical applications include battery-powered sensor nodes, compact industrial controllers, wearable and health-monitoring devices, connected embedded equipment, and low-power consumer products. The 64-pin TQFP package provides a conventional surface-mount footprint with accessible leads for assembly and inspection. When designing around the EFM32LG232F64-QFP64, use the manufacturer pin-description tables and EFM32LG reference documentation to assign every signal, including power, ground, reset, debug, analog, and communication functions. Confirm the board voltage range and peripheral requirements against the device configuration before releasing firmware. This product page combines manufacturer documentation, distributor technical summaries, lifecycle-oriented sourcing guidance, and practical design notes. It also distinguishes confirmed same-package alternatives from options that require engineering review, helping teams assess PCB reuse, firmware compatibility, and supply continuity.

詢價 聯絡我們
EFM32LG280F128G-F-QFP100 - 48MHz ARM Cortex-M3 MCU, 128KB Flash | Silicon Labs
EFM32LG280F128G-F-QFP100

EFM32LG280F128G-F-QFP100 - 48MHz ARM Cortex-M3 MCU, 128KB Flash | Silicon Labs

The Silicon Labs EFM32LG280F128G-F-QFP100 is a 32-bit ARM Cortex-M3 Leopard Gecko microcontroller running at 48 MHz with 128 KB Flash and 32 KB RAM in a 100-pin LQFP (14x14 mm) package. It targets ultra-low-power embedded applications and consumes as little as 0.65 uA in Stop mode and 211 uA/MHz in Run mode. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core widely adopted in energy-constrained embedded systems. The Cortex-M3 sits inside a hierarchy of low-power MCU -> 32-bit MCU -> ARM-based MCU -> embedded microcontroller, and the EFM32LG Leopard Gecko family extends that architecture with Silicon Labs' proprietary low-energy peripherals, fast wake-up, and autonomous sensor interfaces that allow the CPU to remain dormant while peripherals service I/O events. Key features of the EFM32LG280F128G-F-QFP100 include a 48 MHz ARM Cortex-M3 core, 128 KB on-chip Flash program memory, 32 KB RAM, an integrated 12-bit ADC, multiple communication interfaces (USART, SPI, I2C), low-energy timers, a real-time counter, and 86 GPIO pins. It supports an operating voltage range from 1.98 V to 3.8 V and an industrial temperature range of -40C to +85C, with autonomous peripherals that keep the CPU in sleep mode whenever possible. The device uses a low-leakage CMOS process and Silicon Labs' LESENSE / peripheral reflex system, which lets capacitive, inductive, and analog sensors be scanned without waking the core. This makes the Leopard Gecko well-suited to battery-powered sensor nodes, energy harvesting endpoints, and wearable medical patches where active-mode duty cycle is below one percent. The 14x14 mm LQFP-100 footprint also simplifies manual prototyping and hand-solder rework. Typical applications include IoT sensor nodes, wireless M-bus and sub-GHz metering, smart thermostats and HVAC controls, wearable health monitors, and industrial alarm panels. The 86 GPIOs allow direct drive of segmented LCDs (via on-chip LCD controller), keypads, and multiple UART peripherals without external bus expanders. When designing with the EFM32LG280F128G-F-QFP100, follow the Silicon Labs EFM32LG reference manual and use Simplicity Studio as the IDE for energy-aware profiling. Decouple VDD with 100 nF + 4.7 uF ceramic capacitors close to each supply pin and route the 32.768 kHz crystal traces symmetrically with a guard ring to minimize load capacitance drift across temperature. This page synthesizes distributor pricing, parametric alternatives, application notes, and design considerations that are not consolidated in the manufacturer datasheet alone, giving engineers a faster path to part selection.

詢價 聯絡我們
EFM32LG330F64-QFN64 - 48MHz Cortex-M3 MCU | Silicon Labs
EFM32LG330F64-QFN64

EFM32LG330F64-QFN64 - 48MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32LG330F64-QFN64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 48 MHz, with 64 KB of Flash memory and 32 KB of RAM, in a 64-pin QFN package. The device operates from a 1.98 V to 3.8 V supply and integrates USB and AES capabilities for connected, security-conscious embedded systems. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and interface blocks on one integrated circuit. The EFM32LG family belongs to the broader hierarchy of embedded processor, microcontroller, and semiconductor devices. Its ARM Cortex-M3 core provides a common 32-bit instruction set and software ecosystem, while the Leopard Gecko platform adds low-power operation, autonomous peripherals, and extensive analog and digital integration for compact embedded products. The EFM32LG330F64-QFN64 supports operation up to 48 MHz and includes a Memory Protection Unit for isolating software tasks. Its 64 KB Flash memory provides code storage, while 32 KB of RAM supports working data, stacks, and peripheral buffers. The integrated USB and AES functions simplify designs that need USB connectivity and hardware-assisted encryption without requiring separate devices. Energy efficiency is central to the EFM32LG architecture. The manufacturer datasheet states that the family can consume as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode. Autonomous peripherals can perform selected tasks while the processor sleeps, reducing the energy required for sensing, timing, communications, and low-rate data acquisition in battery-operated equipment. Typical uses include connected sensor nodes, industrial monitoring equipment, portable measurement instruments, USB-enabled embedded controllers, and low-power IoT products. The 1.98 V to 3.8 V supply range supports both 2 V and 3.3 V system architectures. Designers should verify USB transceiver requirements, clocking, pin multiplexing, and the exposed-pad layout in the manufacturer pinout and reference design before schematic release. For PCB implementation, use the manufacturer QFN-64 land pattern, connect the exposed pad to the appropriate ground plane, and place decoupling capacitors close to the supply pins. Confirm every peripheral signal against the package pin description because 64-pin QFN devices offer limited escape routing and can require careful fanout between fine-pitch pins and external components. This page combines the manufacturer EFM32LG datasheet, distribution specifications, low-power performance data, documented cross-references, and engineering guidance to clarify device selection, board implementation, and genuine pin-compatible replacement decisions.

詢價 聯絡我們
EFM32LG332F64-QFP64 - 48MHz Cortex-M3 64KB MCU | Silicon Labs
EFM32LG332F64-QFP64

EFM32LG332F64-QFP64 - 48MHz Cortex-M3 64KB MCU | Silicon Labs

Silicon Labs EFM32LG332F64-QFP64 is a 32-bit ARM Cortex-M3 microcontroller rated up to 48 MHz, with 64 KB of flash memory, 32 KB of RAM, and a 64-pin TQFP package. The device operates from a 1.98 V to 3.8 V supply and supports 2.5 V and 3.3 V systems. Its combination of USB, AES hardware security, integrated analog and digital peripherals, and low-energy operating modes makes it suitable for compact embedded control, sensor, and connected products. A microcontroller is a programmable system-on-chip containing a processor core, memory, and peripherals such as communications interfaces, timers, analog converters, and GPIO. The EFM32LG belongs to the Leopard Gecko family, combining an ARM Cortex-M3 core with Silicon Labs low-energy techniques. This hierarchy places it within 32-bit microcontrollers, embedded processors, and semiconductor-based control devices used to execute firmware and supervise surrounding hardware. The EFM32LG332F64-QFP64 provides 48 MHz processing performance and 64 KB of flash for firmware. Its 32 KB RAM supports working data, stack space, and application state. Integrated USB, AES, and extensive peripheral resources reduce the need for external interface or security chips. According to the Silicon Labs EFM32LG data sheet, the family consumes as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode, supporting designs where standby energy use is important. The Leopard Gecko architecture uses an industry-standard 32-bit ARM Cortex-M3 processor and emphasizes energy efficiency through low-power modes, fast wake-up behavior, and autonomous peripheral operation. Autonomous peripherals can perform selected tasks while the processor sleeps, reducing active processing time in periodic sensing and monitoring systems. High analog and digital integration also permits compact implementations without requiring separate converters, communication controllers, or security engines. Typical uses include low-energy sensor nodes, industrial monitoring equipment, portable measurement instruments, USB-connected accessories, security and access-control terminals, and embedded consumer products. A 48 MHz Cortex-M3 core is useful for protocol handling, control loops, and moderate user-interface logic, while the 64-pin package provides a generous pin count for mixed analog and digital designs. When laying out this device, assign every power and ground connection according to the package data and keep sensitive analog inputs away from fast-switching digital nets. Firmware should use the low-energy peripheral features and avoid unnecessary polling. Confirm the exact pin multiplexing, debug interface, and decoupling requirements against the manufacturer data sheet before releasing the PCB layout. This product page combines core electrical characteristics, power-management guidance, package information, and same-footprint alternatives into a design-oriented reference. It also distinguishes exact-family replacements from options that change memory capacity or device qualification, helping engineers assess PCB reuse and firmware implications before selecting a replacement.

詢價 聯絡我們
EFM32LG840F64-QFN64 - 48MHz Cortex-M3 MCU | Silicon Labs
EFM32LG840F64-QFN64

EFM32LG840F64-QFN64 - 48MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32LG840F64-QFN64 is an ARM Cortex-M3 Leopard Gecko 32-bit microcontroller rated up to 48 MHz, with 64 KB of flash memory, 32 KB of RAM, and 56 digital I/O pins in a 64-pin QFN package. The device is designed for energy-sensitive embedded systems that need low-power operation, fast wake-up capability, and integrated mixed-signal resources. Its listed specifications include 8 x 20 LCD support and AES hardware security. An MCU is a compact integrated circuit containing a processor core, memory, peripherals, and I/O in one package. Within the embedded-control hierarchy, the EFM32LG840 belongs to the 32-bit ARM Cortex-M3 class and the Silicon Labs Leopard Gecko family. This platform combines conventional microcontroller control with energy-saving modes and autonomous peripherals that can continue measuring or driving system events while the main processor sleeps. Key features include a maximum operating speed of 48 MHz, 64 KB of flash, 32 KB of RAM, and 56 digital I/O pins. The family datasheet states that EFM32LG devices can consume as little as 0.65 uA in Stop mode and 211 uA/MHz in Run mode. These figures make the device relevant to battery-powered sensors, portable instruments, and industrial nodes in which average power consumption matters as much as processing performance. The Cortex-M3 processor uses a 32-bit RISC architecture and can deliver up to 1.25 Dhrystone MIPS/MHz according to the EFM32LG840 datasheet. It includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for handling events that occur while the processor is asleep. These features support responsive firmware, protected memory regions, and event-driven system design. Typical uses include low-power sensor nodes, compact industrial controllers, battery-operated measurement equipment, LCD-equipped human-interface devices, and connected embedded products. The integrated LCD capability is especially useful for local status displays, while AES acceleration can simplify implementations that protect stored data or communications. Designers should account for the device's 1.98 V to 3.8 V operating-supply range and use a regulator that maintains the required voltage across temperature and load. Decoupling should be placed close to the supply pins, and unused pins should be handled according to the pin-description and termination guidance in the manufacturer datasheet. The exact exposed-pad connection and thermal layout should also be checked against the package drawing before PCB release. This product page consolidates core electrical characteristics, package constraints, replacement considerations, and application guidance. It also distinguishes direct same-footprint options from broader functional alternatives so engineers can focus first on pin compatibility and then verify firmware, peripheral, temperature-grade, and qualification requirements before approving a substitution.

詢價 聯絡我們
EFM32LG842F256G-F-QFP64 - 256KB Flash ARM Cortex-M3 MCU | Silicon Labs
EFM32LG842F256G-F-QFP64

EFM32LG842F256G-F-QFP64 - 256KB Flash ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32LG842F256G-F-QFP64 is a 32-bit ARM Cortex-M3 microcontroller in the energy-efficient EFM32 Leopard Gecko family, offering 256 kB Flash, 32 kB RAM, and a 64-pin TQFP (10x10 mm) package. It runs at up to 48 MHz with a 1.85V to 3.8V supply range and consumes as little as 0.65 uA in Stop mode and 211 uA/MHz in Run mode, making it ideal for battery-powered and energy-sensitive designs. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory, RAM, and configurable I/O peripherals on a single die, providing a self-contained compute platform for embedded applications. The EFM32LG family is positioned within the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC, and is differentiated by Silicon Labs' Low Energy Technology that uses autonomous peripherals, fast wake-up, and multiple sleep modes to minimize average system power. This category is widely used in IoT, metering, sensor hubs, and human-machine interface (HMI) designs. Key features include 53 digital I/O lines, 4 x 16-bit timer/counters, integrated LCD driver, 12-bit ADC, AES-128 crypto accelerator, and the LESENSE/TIMER/RTC autonomous peripheral set that can wake the CPU only when needed. The device also offers USB, UART, I2C, and SPI interfaces, plus a 16-channel DMA engine and on-chip debugging via SWD/JTAG. The energy-aware design philosophy delivers deterministic interrupt latency with deep-sleep current of approximately 0.65 uA. Architecturally, the EFM32LG842F256G-F-QFP64 uses the industry-standard ARM Cortex-M3 core with Thumb-2 instruction set and hardware divide, paired with Silicon Labs' proprietary peripheral reflex system that allows sensors and timers to operate without CPU intervention. This combination yields responsive event handling at sub-microsecond wake times while preserving battery life in duty-cycled applications. Typical applications include battery-powered IoT nodes, wireless sensor hubs, smart metering, wearable fitness/health devices, industrial sensor front-ends, and low-power human-interface products with LCD displays. The wide operating voltage range and integrated LCD controller make it especially attractive for battery-powered utility meters and portable medical devices. When designing with this part, note that the 64-pin TQFP package requires careful PCB layout to keep analog and digital grounds separate, and decoupling capacitors should be placed within 3 mm of each supply pin. Use Simplicity Studio and the energyAware Profiler to characterize average current across sleep/wake duty cycles. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
EFM32LG842F64-QFP64 - 48MHz Cortex-M3 MCU | Silicon Labs
EFM32LG842F64-QFP64

EFM32LG842F64-QFP64 - 48MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32LG842F64-QFP64 is a 32-bit ARM Cortex-M3 microcontroller in the Leopard Gecko family, operating up to 48 MHz with 64 KB of flash memory and 32 KB of RAM in a 64-pin TQFP package. It operates from a 1.98 V to 3.8 V supply range and integrates an 8x18 LCD controller, hardware AES support, and low-power peripherals for energy-conscious embedded systems. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The EFM32LG belongs to the ARM Cortex-M3 microcontrollers hierarchy, where the Cortex-M3 core provides a compact 32-bit RISC architecture for control-oriented products. Within the Silicon Labs portfolio, the Leopard Gecko family combines computational performance with autonomous peripherals, allowing time-critical tasks to continue with reduced processor involvement. The EFM32LG842F64-QFP64 provides 64 KB of flash for firmware and 32 KB of RAM for working memory. Its 48 MHz maximum clock speed supports responsive control, communication, and user-interface tasks, while the integrated LCD controller can drive an 8x18 display. Hardware AES accelerates encrypted data handling, and the integrated analog and timing resources reduce the need for external components in sensor, industrial-control, and embedded user-interface designs. Silicon Labs describes the EFM32LG platform as offering 211 uA/MHz in Run mode and consumption as low as 0.65 uA in Stop mode. These figures make the device relevant to battery-powered equipment that spends much of its operating life in a low-power state. The memory protection unit and wake-up interrupt controller support safer firmware execution and event-driven wake-up behavior. Typical uses include portable measurement instruments, compact industrial controllers, sensor nodes, access-control equipment, and low-power LCD products. The 3.3 V-oriented supply range and integrated display interface are particularly useful in compact products where board area and energy consumption are constrained. The 64-pin TQFP package also provides a practical route to prototyping through conventional surface-mount assembly. When laying out the board, provide a stable supply close to the power pins and route high-current or high-speed signals away from sensitive analog inputs. Confirm the complete peripheral pin assignments, decoupling requirements, clock options, and programming interface against the manufacturer datasheet before releasing PCB artwork. The 1.98 V to 3.8 V operating range should be checked against every external sensor and transceiver used with the MCU. This page consolidates the verified electrical characteristics, package information, drop-in alternatives, comparison parameters, and practical design guidance needed to evaluate the EFM32LG842F64-QFP64 alongside other Cortex-M3 and EFM32 devices.

詢價 聯絡我們