產品(46,000+)

M2GL025T-VFG256 - 27,696-Cell IGLOO2 FPGA | Microchip
M2GL025T-VFG256

M2GL025T-VFG256 - 27,696-Cell IGLOO2 FPGA | Microchip

Microchip M2GL025T-VFG256 is a 27,696-logic-cell IGLOO2 flash-based field-programmable gate array with 138 user I/O, 1,130,496 bits of embedded memory, and a 256-pin low-profile fine-pitch BGA package. The device operates from a 1.2 V core supply and supports the extended commercial temperature range of 0°C to +85°C. Its non-volatile configuration memory allows the FPGA to retain its programmed logic without a separate configuration PROM. An FPGA is a programmable semiconductor whose logic fabric, embedded memory, and I/O can be configured after fabrication. Within the device hierarchy, the M2GL025T-VFG256 is an IGLOO2 flash FPGA, a low-density FPGA, a programmable logic device, and an integrated semiconductor. Unlike mask-programmed logic or firmware-only microcontrollers, it supports hardware parallelism, deterministic I/O behavior, and design changes without replacing the physical device. Key device attributes include 27,696 logic cells, 138 user I/O, 1,130,496 bits of embedded SRAM, and a 256-LFBGA package measuring 14 mm by 14 mm. The IGLOO2 family provides non-volatile configuration storage and low-power operation for communications, industrial, medical, defense, and aviation systems. The flash configuration architecture also supports in-system programming, permitting field updates without external memory devices. The fabric combines programmable logic elements with embedded memory and dedicated I/O resources, allowing multiple data paths to execute concurrently. Its 138 I/O can support external interfaces, control signals, clock distribution, and data acquisition functions. The device is intended for bridging, protocol conversion, I/O expansion, system management, secure connectivity, video or image processing, and general-purpose embedded control. Typical uses include industrial data acquisition, industrial networking, medical monitoring equipment, communications control planes, and embedded security controllers. A typical design uses the FPGA to consolidate parallel acquisition logic, protocol conversion, and local supervisory functions while reducing the number of discrete components. The same package also supports board-level programming, configuration security, and controlled production testing. PCB design should preserve the package's fine-pitch BGA escape requirements and provide clean power distribution for the 1.2 V core. Decoupling capacitors should be placed close to the relevant power and ground balls, while programming-interface signals require dependable access for factory programming and field updates. Designers should also review the package pin-description and IGLOO2 packaging user guide before assigning ball functions. This page combines the exact MPN, package and resource data, application guidance, design notes, and clearly qualified replacement options. It is intended to help engineers verify footprint, temperature grade, logic capacity, and programming requirements before integrating the FPGA into a production PCB.

詢價 聯絡我們
M2GL025T-VFG400 - 27.6K LLE Flash FPGA | Microchip
M2GL025T-VFG400

M2GL025T-VFG400 - 27.6K LLE Flash FPGA | Microchip

The Microchip M2GL025T-VFG400 is a 27,696-logic-element IGLOO2 flash field-programmable gate array with 195 I/O, a 1.2 V core voltage, and a 400-LFBGA package. It combines reconfigurable programmable logic with embedded flash configuration memory for reliable, nonvolatile FPGA operation. The device is suited to general-purpose logic, interface bridging, I/O expansion, protocol conversion, system management, and secure connectivity designs. An FPGA is a programmable semiconductor whose logic, memory, and I/O resources can be configured after manufacture to implement a wide range of digital functions. Within the semiconductor hierarchy, the M2GL025T-VFG400 belongs to the flash FPGA category, combines LUT-based programmable logic with nonvolatile configuration storage, and operates as a general-purpose digital building block for embedded control and communication systems. The M2GL025T-VFG400 provides 27,696 logic cells, 195 user I/O, and a 1.2 V operating voltage. Its 400-LFBGA package offers 400 contact positions for a compact system design. Programmable I/O supports communication interfaces, data acquisition, control logic, and external peripheral connections, while embedded flash allows the programmed configuration to remain available without continuous configuration-memory loading. Microchip's IGLOO2 family combines low-density programmable logic with integrated flash configuration memory. The device is identified by the M2GL025 family designation, the T speed-grade suffix, the VFG400 package code, and the 400-LFBGA configuration. The manufacturer documentation also covers electrical operating characteristics and a separate user guide for package and pin descriptions, enabling mechanical and electrical design planning. Typical applications include industrial control modules, communication bridges, I/O expansion boards, embedded protocol converters, video and image-processing interfaces, and system-management controllers. The 195-I/O complement is particularly useful when a design must connect multiple buses, sensors, converters, and digital peripherals while maintaining a compact package footprint. PCB implementation requires careful BGA escape routing, power and ground-plane integrity, and thermal management around the 400-LFBGA device. The designer should follow the manufacturer's package, pin-description, and reference-design guidance, validate signal integrity on high-speed interfaces, and confirm that the selected board stack-up supports the package's escape and assembly requirements. This product page combines the manufacturer family data, package information, device-search results, and an application-note-based migration path with practical replacement guidance. It distinguishes true same-package alternatives from functional alternatives, identifies the logic-cell and temperature-grade trade-offs, and provides selection criteria for bridging, I/O expansion, conversion, control, and secure-connectivity designs.

詢價 聯絡我們
M2GL025TS-FG484 - 27.6K LEs Low-Power Flash FPGA | Microchip
M2GL025TS-FG484

M2GL025TS-FG484 - 27.6K LEs Low-Power Flash FPGA | Microchip

The Microchip Technology M2GL025TS-FG484 is a low-density IGLOO2 flash field-programmable gate array with 27,600 logic elements, 267 user I/Os, and a 484-ball BGA package. It combines programmable logic, embedded flash configuration storage, and a large external I/O interface in one surface-mount device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. By combining programmable logic blocks with configurable I/O, an FPGA can implement control logic, interface conversion, protocol bridging, data acquisition, and hardware acceleration without requiring a custom application-specific integrated circuit. The IGLOO2 family is positioned for low-density applications where low power, integrated nonvolatile configuration storage, and a broad I/O count are important. The M2GL025TS-FG484 provides 27.6K logic elements and 267 I/Os. Its flash-based configuration architecture allows the programmed logic to be retained without a separate external configuration PROM. The 484-BGA package also provides substantially more physical I/O than a small leaded FPGA package, making the device suitable for systems that must connect multiple buses, converters, memory interfaces, and control signals. Microchip describes IGLOO2 devices as suitable for general-purpose functions including Gigabit Ethernet and dual PCI Express control planes, bridging functions, I/O expansion and conversion, video and image processing, system management, and secure connectivity. These applications benefit from programmable logic that can be updated while also operating from embedded flash configuration memory. The M2GL025TS-FG484 is particularly relevant to industrial equipment, communications infrastructure, embedded control systems, and compact edge-processing platforms. A designer can consolidate several discrete interface blocks into one FPGA while retaining hardware-level timing control and upgradeable configuration. Pin assignment, differential-I/O usage, supply requirements, and high-speed interface constraints must be checked against the manufacturer’s FG484 device documentation before layout. Because the 484-ball package contains many power, ground, configuration, and user-I/O balls, conservative power and ground distribution and careful BGA fanout are essential. This product page combines the exact manufacturer and catalog identifiers, package and resource details, drop-in upgrade options, a parameter comparison, and application-specific design guidance. It focuses on engineering selection and implementation rather than reproducing the complete pin-description table or device programming documentation.

詢價 聯絡我們
M2GL025TS-VF256 - 27.6K LEs, 138 I/O IGLOO2 FPGA | Microchip
M2GL025TS-VF256

M2GL025TS-VF256 - 27.6K LEs, 138 I/O IGLOO2 FPGA | Microchip

Microchip M2GL025TS-VF256 is an IGLOO2 low-density FPGA with 27.6K logic elements, 138 user I/O, and a 256-LFBGA package. The device operates from 1.14 V to 2.625 V, making it suitable for low-voltage embedded systems that require reconfigurable logic, parallel interfaces, and compact board space. An FPGA is a programmable semiconductor in which both the logic configuration and I/O behavior are established after manufacturing. Within the broader programmable-logic hierarchy, an FPGA sits above fixed-function logic and below system-level programmable devices. IGLOO2 combines non-volatile on-chip configuration flash, low-power operation, and deterministic I/O resources for bridging, control-plane, interface-conversion, security, and image-processing functions. The principal feature set includes 27.6K logic elements, 138 I/O, embedded configuration memory, and a 256-ball LFBGA package with a stated 0.8 mm ball pitch. The 138 available I/O provide substantial connectivity for parallel buses, control signals, serial interfaces, memory interfaces, and external converters. Unlike a fixed-function microcontroller, the IGLOO2 architecture allows logic timing, interface widths, and peripheral functionality to be updated through a new configuration image. The M2GL025TS designation places this device in the standard-voltage IGLOO2 family. Its stated supply range of 1.14 V to 2.625 V spans typical low-voltage core and I/O operating regions. Designers must account for the I/O voltage relationship when connecting the device to external logic: bank power must not exceed the voltage tolerated by the connected interface, even when the core supply is operating normally. Typical applications include industrial bridge and protocol-conversion logic, secure connectivity, control-plane functions, video and image processing pipelines, I/O expansion, and general-purpose embedded control. Its combination of 138 I/O and 27.6K logic elements is useful when a fixed microcontroller lacks enough parallel I/O or when a programmable interface must support several connector formats without requiring a larger device. The 256-LFBGA package demands careful PCB planning. Use the Microchip IGLOO 2 Packaging and Pin Descriptions User Guide to assign power, ground, configuration, clock, and user I/O pins. Confirm every ball location, bank voltage, decoupling requirement, and exposed thermal strategy against the manufacturer documentation before fabrication. This product page combines the exact MPN identification, verified package information, application guidance, engineering considerations, and directly related IGLOO 2 options. It is intended to accelerate component selection, footprint review, sourcing, and first-pass board planning for engineers working with the M2GL025TS-VF256.

詢價 聯絡我們
M2GL025TS-VF400 - 27.6K LEs, 207 I/O IGLOO2 FPGA | Microchip
M2GL025TS-VF400

M2GL025TS-VF400 - 27.6K LEs, 207 I/O IGLOO2 FPGA | Microchip

The Microchip Technology M2GL025TS-VF400 is a low-density IGLOO2 flash field-programmable gate array with 27.6K logic elements, 207 I/O, and a 400-LFBGA package. It is designed for general-purpose programmable logic, I/O expansion and conversion, bridging functions, control-plane logic, video and image processing, system management, secure connectivity, Gigabit Ethernet interfaces, and dual PCI Express control-plane applications. Its flash configuration architecture supports a reusable FPGA-based implementation in a compact, high-pin-count surface-mount package. An FPGA is a reconfigurable semiconductor in which digital logic, interfaces, and signal-processing functions are defined through a programmable configuration file. Within the product hierarchy, the M2GL025TS-VF400 is an IGLOO2 FPGA, a low-density member of the IGLOO2 family, and part of the broader programmable-logic and semiconductor categories. This hierarchy places the device between fixed-function digital integrated circuits and higher-density programmable-logic devices, offering a flexible implementation path for control, interface, and glue-logic designs. The device’s defining resource is its 27.6K logic elements, accompanied by 207 user I/O in the VF400 package. The high I/O count allows compact systems to combine multiple interface standards and external bus functions on one device. The manufacturer identifies IGLOO2 devices as low-density flash FPGAs intended for general-purpose functions, including Gigabit Ethernet and dual PCI Express control planes, bridging, I/O expansion and conversion, video and image processing, system management, and secure connectivity. The “TS” and “VF400” suffixes distinguish this orderable configuration from related speed-grade, temperature-grade, and package or tape-and-reel variants in the IGLOO2 family. Designers should therefore validate the complete ordering code rather than treating every 400-ball IGLOO2 device as electrically identical. Configuration-device selection, programmed bitstream generation, pin constraints, and board-level power requirements must all be checked against the manufacturer’s device documentation before release to manufacturing. Typical applications include protocol bridging, industrial and communications equipment, secure network interfaces, embedded control systems, video capture or processing modules, and systems that need programmable logic alongside a host processor. In these systems, the FPGA can absorb changing interface logic, implement parallel-to-serial or protocol conversion, expand I/O, or implement control-plane functions while preserving flexibility after initial hardware design. The primary design consideration is package complexity. A 400-LFBGA requires careful PCB escape routing, controlled-impedance layout, dense via structures, and assembly processes suitable for fine-pitch ball-grid-array packages. Power, ground, configuration, programming, and I/O connectivity should follow the manufacturer’s pin and board-layout guidance, with thermal and signal-integrity performance validated in the final board stack-up. This product page combines the verified IGLOO2 resource, I/O, package, family positioning, and application data with drop-in family alternatives, practical PCB considerations, and structured selection guidance. It is intended to help engineers narrow the correct ordering suffix before downloading the datasheet, programming the device, and releasing the assembled design.

詢價 聯絡我們
M2GL050-1FG484 - 56K-LUT IGLOO2 FPGA | Microchip
M2GL050-1FG484

M2GL050-1FG484 - 56K-LUT IGLOO2 FPGA | Microchip

The Microchip Technology M2GL050-1FG484 is an IGLOO2 low-density field-programmable gate array with 56,340 logic cells, 267 I/O, and a 1.2 V core in a 484-pin FBGA package. It combines reconfigurable programmable logic with embedded flash configuration memory, making it suitable for general-purpose bridging, I/O expansion, interface conversion, system management, and secure connectivity designs. An FPGA is a semiconductor device whose digital logic, interconnect, and I/O behavior are defined after fabrication. Within the product hierarchy, the M2GL050-1FG484 belongs to the IGLOO2 family of low-density FPGAs, combining programmable logic, embedded flash configuration memory, and a broad selection of programmable I/O. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic changes, field updates, and design adaptation without replacing the device. The M2GL050 provides 56,340 logic cells and 267 I/O, giving designers substantial connectivity for control logic, data acquisition, protocol conversion, and peripheral aggregation. Its 1.2 V core and embedded flash configuration memory support a compact implementation in high-pin-count ball-grid-array packages. The 484-BGA package supports dense connections while accommodating devices that need numerous parallel or high-speed interfaces. According to the Microchip M2GL050 manufacturer datasheet, the device is based on the IGLOO2 architecture and is positioned for low-density programmable-logic applications. The same documentation identifies general-purpose functions including bridging, I/O expansion, conversion, system management, and secure connectivity. These applications benefit from programmable pin behavior and on-chip configuration storage, which simplify hardware updates after deployment. Typical implementations include industrial communication adapters, programmable I/O concentrators, data-acquisition front ends, protocol converters, embedded control systems, and secure connectivity equipment. The 267 available I/O are particularly useful where the design must connect multiple sensors, actuators, memory devices, serial links, or legacy buses while retaining field-reconfigurable logic. PCB design should follow Microchip’s IGLOO2 FG484 package and pin-information guidance, including ball assignment, power-plane, decoupling, and high-speed routing requirements. Designers should also account for the configuration interface, unused I/O behavior, supported clocking resources, and the selected I/O standard before finalizing a new board. A Libero design should be checked for timing and pin-assignment closure before release. This product page combines the manufacturer specifications, device-family positioning, practical deployment guidance, comparison criteria, and verified drop-in candidates to support faster component selection and board-design planning. It also highlights where grade and lifecycle differences require engineering review before a replacement is approved.

詢價 聯絡我們
M2GL050-1FG896 - 56K LLE IGLOO2 FPGA | Microchip
M2GL050-1FG896

M2GL050-1FG896 - 56K LLE IGLOO2 FPGA | Microchip

The Microchip Technology M2GL050-1FG896 is an IGLOO 2 flash FPGA with 56,340 logic elements, 377 user I/O, and 1.2 V core operation in an 896-pin FBGA package. The M2GL050-1FG896 combines programmable logic, embedded flash configuration memory, and a large ball-grid-array footprint in a single low-density device intended for bridging, I/O expansion, protocol conversion, system management, secure connectivity, image processing, and communications control functions. An FPGA is a programmable semiconductor in the broader logic IC and semiconductor hierarchy. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA can be configured after manufacture to implement digital logic, state machines, interfaces, and parallel processing functions. The IGLOO 2 family combines reconfigurable logic with embedded flash, allowing the configuration to be retained in the device and supporting designs that need hardware flexibility without external configuration storage. The M2GL050 family provides 56,340 logic elements and a 1.2 V core supply according to the manufacturer product information. Its 896-pin FBGA package exposes 377 I/O, creating a high pin-count interface for parallel buses, high-speed links, memory interfaces, control signals, and external converters. The package also makes component placement and escape routing a significant PCB-layout consideration compared with lower-pin-count devices. The IGLOO 2 architecture supports general-purpose logic functions rather than hard processor cores. This makes it suitable for custom protocol bridges, data acquisition front ends, image and video processing pipelines, communications infrastructure, industrial controllers, and embedded security functions. Microchip identifies communications, industrial, medical, defense, and aviation markets as application areas for IGLOO 2 devices, while also noting uses that include Gigabit Ethernet control planes, dual PCI Express control planes, I/O expansion and conversion, and secure connectivity. Because the M2GL050-1FG896 is configured through embedded flash, a complete design also requires a compatible bitstream, programming tool, pin-placement plan, and clocking strategy. Designers should preserve the manufacturer's recommended power, decoupling, and ball-grid-array layout rules. A fineless 896-pin FBGA also requires careful inspection, solder-paste control, and assembly-process qualification because solder-joint defects can create intermittent failures that are difficult to diagnose after deployment. This product page combines the manufacturer family information with package, logic-cell, I/O, voltage, and lifecycle details. It also organizes replacement guidance, application fit, and design cautions so engineers can evaluate the M2GL050-1FG896 before committing a high-pin-count BGA layout to a new PCB. The Microchip Technology M2GL050-1FG896 is an IGLOO 2 flash FPGA with 56,340 logic elements, 377 user I/O, and 1.2 V core operation in an 896-pin FBGA package. The M2GL050-1FG896 combines programmable logic, embedded flash configuration memory, and a large ball-grid-array footprint in a single low-density device intended for bridging, I/O expansion, protocol conversion, system management, secure connectivity, image processing, and communications control functions. An FPGA is a programmable semiconductor in the broader logic IC and semiconductor hierarchy. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA can be configured after manufacture to implement digital logic, state machines, interfaces, and parallel processing functions. The IGLOO 2 family combines reconfigurable logic with embedded flash, allowing the configuration to be retained in the device and supporting designs that need hardware flexibility without external configuration storage. The M2GL050 family provides 56,340 logic elements and a 1.2 V core supply according to the manufacturer product information. Its 896-pin FBGA package exposes 377 I/O, creating a high pin-count interface for parallel buses, high-speed links, memory interfaces, control signals, and external converters. The package also makes component placement and escape routing a significant PCB-layout consideration compared with lower-pin-count devices. The IGLOO 2 architecture supports general-purpose logic functions rather than hard processor cores. This makes it suitable for custom protocol bridges, data acquisition front ends, image and video processing pipelines, communications infrastructure, industrial controllers, and embedded security functions. Microchip identifies communications, industrial, medical, defense, and aviation markets as application areas for IGLOO 2 devices, while also noting uses that include Gigabit Ethernet control planes, dual PCI Express control planes, I/O expansion and conversion, and secure connectivity. Because the M2GL050-1FG896 is configured through embedded flash, a complete design also requires a compatible bitstream, programming tool, pin-placement plan, and clocking strategy. Designers should preserve the manufacturer's recommended power, decoupling, and ball-grid-array layout rules. A fineless 896-pin FBGA also requires careful inspection, solder-paste control, and assembly-process qualification because solder-joint defects can create intermittent failures that are difficult to diagnose after deployment. This product page combines the manufacturer family information with package, logic-cell, I/O, voltage, and lifecycle details. It also organizes replacement guidance, application fit, and design cautions so engineers can evaluate the M2GL050-1FG896 before committing a high-pin-count BGA layout to a new PCB.

詢價 聯絡我們
M2GL050-1VF400 - 56,340-Cell IGLOO2 FPGA | Microchip
M2GL050-1VF400

M2GL050-1VF400 - 56,340-Cell IGLOO2 FPGA | Microchip

Microchip Technology M2GL050-1VF400 is an IGLOO2 low-density FPGA with 56,340 logic cells, 207 I/O, and a 400-LFBGA package. The device is identified as not recommended for new designs, with Microchip's M2GL060 identified as the recommended successor family. It belongs to the broader FPGA and programmable-logic hierarchy and combines configurable logic, embedded memory, programmable I/O, and on-chip flash in one low-power device. An FPGA is a semiconductor whose digital behavior is defined after manufacture through a configuration bitstream. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement parallel processing, interface conversion, protocol bridging, control logic, and hardware acceleration in one device. The M2GL050 family is positioned for general-purpose functions such as I/O expansion, system management, secure connectivity, bridging, and industrial communications. The M2GL050-1VF400 is specified at 56,340 logic cells and 207 I/O in a 400-LFBGA package. Its 400-ball fine-pitch package supports dense board integration but requires careful land-pattern, escape-routing, and assembly planning. The product designation includes a 1.2 V operating class and a -1 speed-grade suffix, while the exact I/O, power, memory, and timing limits should be confirmed against the manufacturer's IGLOO 2 FPGA datasheet and pin-information user guide before schematic capture or PCB release. The IGLOO 2 architecture integrates programmable logic with embedded memory and on-chip flash. Microchip identifies these flash FPGAs as useful for general-purpose logic, I/O expansion, conversion, system management, and secure connectivity. A design can therefore consolidate functions that would otherwise require multiple programmable or discrete devices, provided the required interfaces, timing, and I/O standards are supported by the selected package and speed grade. Typical applications include industrial control, communications infrastructure, sensor and signal conditioning, embedded security bridges, test equipment, and low-power embedded control. The device is especially relevant to brownfield maintenance because an existing M2GL050-based board can be supported without changing its established IGLOO 2 architecture. New designs should evaluate M2GL060 as the manufacturer-recommended migration path. For a new PCB, start with the manufacturer's VF400 package drawing, land pattern, and power-decoupling guidance rather than deriving the footprint from the 400-ball count. Confirm that every power, ground, configuration, clock, and user I/O connection is assigned according to the pin-information guide before fabrication. This product page combines the device identity, lifecycle position, manufacturer resources, package constraints, verified replacement candidates, and application guidance into an engineering-oriented overview for maintenance, migration, and second-source decisions.

詢價 聯絡我們
M2GL050-FCS325 - 56K IGLOO2 FPGA, 200 I/O, 325-BGA
M2GL050-FCS325

M2GL050-FCS325 - 56K IGLOO2 FPGA, 200 I/O, 325-BGA

The Microchip Technology M2GL050-FCS325 is an IGLOO2 low-density FPGA with 56,340 logic elements, 200 I/O, and a 325-BGA FCBGA package. It operates from a 1.2 V core supply and is identified as an in-production FPGA for communications, industrial, medical, defense, and aviation designs. The M2GL050-FCS325 combines programmable logic resources with 200 user I/O in a compact 325-ball package, making it suitable for bridging, I/O expansion, system management, signal conversion, secure connectivity, and embedded control functions. An FPGA is a programmable semiconductor containing configurable logic blocks, routing resources, input/output blocks, and embedded memory. Within the product hierarchy, an FPGA is a programmable-logic IC, while the IGLOO2 family specifically provides low-density, non-volatile flash FPGA devices. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA can be configured after manufacture to implement parallel processing, interface control, protocol handling, data acquisition, and hardware acceleration functions. Key features of the M2GL050-FCS325 include 56,340 logic cells, 200 I/O, a 1.2 V core voltage, and a 325-BGA FCBGA package. The flash-based architecture supports configuration persistence, while the large I/O count supports connections to external memories, converters, transceivers, and industrial peripherals. The package also provides a high pin count for designs requiring numerous digital connections or dedicated differential and control functions. The device belongs to Microchip's IGLOO2 family, which is positioned for general-purpose programmable-logic functions. Its resource density is higher than smaller IGLOO2 devices, allowing more parallel logic, control, or interface functions to be consolidated into one FPGA. Device migration within the FCS325 package is documented by Microchip, although designers must check pin compatibility and device-resource restrictions when moving between M2GL025 and M2GL050. Typical uses include industrial bridge and protocol-conversion equipment, PCI Express control-plane functions, video and image-processing pipelines, secure connectivity modules, medical instrumentation, defense systems, and I/O expansion for embedded processors. The 200 available I/O can reduce the number of external glue devices when a design must connect several buses, memories, sensors, or digital peripherals. A critical design step is to assign every ball using the IGLOO2 packaging and pin-description user guide. Verify power-bank requirements, dedicated configuration pins, differential-capable I/O, and package-specific restrictions before schematic capture or PCB layout. This page combines the M2GL050-FCS325 specifications, package information, migration guidance, design notes, and available drop-in alternatives to accelerate engineering evaluation.

詢價 聯絡我們
M2GL050-FCSG325 - 56K LE IGLOO2 FPGA | Microchip
M2GL050-FCSG325

M2GL050-FCSG325 - 56K LE IGLOO2 FPGA | Microchip

The Microchip Technology M2GL050-FCSG325 is an IGLOO2 low-density field-programmable gate array containing 56,340 logic elements and operating from a 1.2 V core supply. It is packaged in a 325-terminal square FCBGA, also identified as a 325-TFBGA. The device belongs to the IGLOO2 family of flash-based programmable logic devices intended for general-purpose logic, bridging, input/output expansion, data conversion, system management, and secure connectivity functions. An FPGA is a semiconductor whose internal digital logic is configured after manufacture. In the product hierarchy, the M2GL050-FCSG325 is a field-programmable gate array, a programmable-logic device, and a semiconductor integrated circuit. Unlike a fixed-function microcontroller or application-specific IC, its routing and logic resources can be adapted to interface, control, protocol, and signal-processing requirements while retaining a reusable hardware platform. The principal device figures are 56,340 logic elements, a 1.2 V core voltage, and a 325-ball FCBGA package. The M2GL050 family is positioned for low-density applications in which designers need more parallel logic capability than a small programmable logic device, but do not require a high-end FPGA. Its flash-based configuration also allows the programmed logic function to be retained as part of the device configuration workflow. Package integration is important for this part because the 325-ball FCBGA supports a high number of I/O connections while keeping the device suitable for multilayer PCB construction. Signal integrity, power delivery, decoupling, and ball-pitch routing therefore become central design considerations. Designers should use the IGLOO2 pin-information user guide when assigning balls to banks and selecting compatible I/O standards. Typical uses include industrial protocol bridging, communications infrastructure, embedded control, general-purpose glue logic, and secure connectivity. The manufacturer identifies bridging, I/O expansion, conversion, system management, and secure connectivity as representative IGLOO2 applications. These uses benefit from programmable parallel logic and a large I/O count relative to simple fixed-function interface devices. The key design tradeoff is migration risk: the non-industrial M2GL050-FCSG325 is identified as not recommended for new designs, with M2GL060 suggested for new projects. Existing designs can retain the 325-ball footprint, but new hardware should account for the recommended family transition, device availability, programming-tool support, and any changes in resources or bank features. This product record combines the manufacturer family position, package and logic-density details, documented migration guidance, and application-oriented engineering guidance. It also identifies the closest verified same-family options so engineers can distinguish temperature-grade, package-code, and lifecycle changes before committing a PCB or production build to this device.

詢價 聯絡我們
M2GL050-FG484 - 56,340-Cell IGLOO2 FPGA | Microchip
M2GL050-FG484

M2GL050-FG484 - 56,340-Cell IGLOO2 FPGA | Microchip

The Microchip Technology M2GL050-FG484 is a 56,340-cell IGLOO2 flash field-programmable gate array with 267 I/O, a 1.2 V device core, and a 484-pin FBGA package. It is designed for general-purpose programmable logic, bridging, I/O expansion, protocol conversion, system management, and secure connectivity. An FPGA is a reconfigurable digital semiconductor whose logic, interconnect, and I/O behavior can be programmed after manufacture. The M2GL050 belongs to the IGLOO2 family, which sits within the broader hierarchy of programmable-logic devices, FPGAs, and semiconductors. Its flash configuration memory allows designs to be loaded and retained without the external configuration devices normally associated with SRAM-based FPGAs. Key device attributes include 56,340 programmable logic cells, 1,869,824 gates as reported by the distributor listing, 267 I/O, a 1.2 V supply specification, and a 484-pin FBGA package. The M2GL050 family is identified by Microchip as being in production and is positioned for communications, industrial, medical, defense, and aviation applications. The device is particularly useful when a design requires programmable logic alongside conventional processor-managed systems. Typical implementation tasks include protocol bridging, data-format conversion, I/O expansion, control-plane logic, and secure connectivity functions. Its large ball-grid-array footprint also supports dense connection to external memories, transceivers, converters, and mixed-signal systems while exposing numerous programmable I/O resources. Typical uses include industrial interface conversion, communications infrastructure, medical monitoring equipment, image or video processing, and embedded control systems where deterministic hardware logic provides useful parallelism or offloads work from a host processor. Designs must account for the complex BGA routing, bank-based power architecture, configuration requirements, and signal-integrity constraints of a 484-ball programmable device. For new designs, engineers should verify the current Microchip lifecycle, supported toolchain, pin-bank assignments, and package documentation before layout release. The Microchip AC402 application note states that footprint compatibility is possible among M2GL025, M2GL050, and M2GL090 FG484 devices, but some pins have a reduced compatibility feature set; migration therefore requires detailed pin review rather than assuming every function is interchangeable. This page combines verified pricing, package information, manufacturer guidance, and application-specific engineering context to help engineers evaluate the M2GL050-FG484 beyond a basic distributor specification sheet.

詢價 聯絡我們
M2GL050-FG484I - 56K LEs, 267 I/O IGLOO2 FPGA | Microchip
M2GL050-FG484I

M2GL050-FG484I - 56K LEs, 267 I/O IGLOO2 FPGA | Microchip

The Microchip Technology M2GL050-FG484I is an IGLOO2 flash-based field-programmable gate array with 56,340 logic elements, 267 I/O, and a 484-ball BGA package. The device combines non-volatile FPGA configuration, programmable logic, embedded memory resources, and flexible I/O in a single surface-mount package. It is supplied in an industrial temperature grade and uses a 1.2 V core supply according to the manufacturer product listing. An FPGA is a programmable semiconductor in which digital logic, interface functions, and state machines are configured after manufacture. The M2GL050 belongs to the IGLOO2 family, a low-density flash FPGA positioned below higher-capacity devices in the broader semiconductor hierarchy: FPGA → programmable logic device → digital logic IC. IGLOO2 devices are suitable for bridging, I/O expansion, protocol conversion, system management, secure connectivity, and embedded control functions. The M2GL050 provides 56,340 logic elements, 267 I/O, and 1,826 kb of embedded RAM according to the manufacturer product and distributor records. Its 484-BGA package supports a high pin count and numerous general-purpose I/O, making it suitable for systems that require parallel data collection, control, communications interfaces, or multiple external peripherals. Flash-based configuration allows the programmed logic to be retained when power is removed. The IGLOO2 architecture supports general-purpose digital implementation without requiring a separate external configuration PROM. Engineers can create parallel logic paths, state machines, bus controllers, data converters, and interface bridges in one programmable device. Because the M2GL050 combines logic and 267 I/O in one package, it can reduce board partitioning when a design has numerous digital connections, although routing density and bank constraints still require careful planning. Typical applications include industrial data-acquisition systems, communications bridges, I/O concentrators, protocol converters, embedded system-management controllers, medical equipment interfaces, and secure connectivity functions. The 267-I/O count is particularly useful for parallel sensor aggregation, while the 56,340 logic elements provide capacity for control logic, packet processing, and digital state machines within the same FPGA. PCB implementation requires careful BGA layout with controlled escape routing, multiple supply connections, and a power-distribution network capable of supporting core and I/O requirements. Signal-integrity and power-integrity validation should include the selected Microchip implementation guidance, differential-pair rules where applicable, and simulation of the intended board stack-up rather than relying only on nominal package dimensions. This product page consolidates the M2GL050 device identity, package information, IGLOO2 application positioning, sourcing workflow, and design guidance into one engineering-focused reference. It also distinguishes the exact industrial MPN from related family variants and highlights where a true pin-compatible replacement must be confirmed against device, package, speed, voltage, and I/O specifications.

詢價 聯絡我們
M2GL050-FG896 - 56K IGLOO2 FPGA | Microchip Technology
M2GL050-FG896

M2GL050-FG896 - 56K IGLOO2 FPGA | Microchip Technology

The Microchip Technology M2GL050-FG896 is an IGLOO2 flash field-programmable gate array with 56,340 logic cells, a 1.2 V core supply, and 896-pin FBGA packaging. The device combines programmable logic resources, embedded memory, user I/O, and configuration flash in a single surface-mount FPGA. Its 896-ball package provides a large pin count and substantial I/O capacity for bridging, protocol conversion, I/O expansion, system management, and secure-connectivity applications. An FPGA is a reconfigurable digital integrated circuit whose interconnect and logic blocks can be programmed after manufacture. Within the programmable-logic hierarchy, an FPGA sits above fixed-function logic devices and below application-specific programmable systems. The M2GL050 belongs to Microchip's IGLOO2 family, a flash-based FPGA architecture intended to provide nonvolatile configuration and general-purpose programmable logic without an external configuration PROM. The verified product information identifies the M2GL050-FG896 as a 56,340-cell IGLOO2 device in an 896-pin FBGA package. The IGLOO2 family includes devices ranging from 5,000 to 150,000 logic cells, allowing designers to select a device according to logic capacity, I/O count, package, speed grade, and temperature grade. The target ordering code uses the FG896 package designation, while related M2GL050 order codes identify different temperature or speed options. IGLOO2 devices use embedded flash to retain the programmed configuration. This architecture supports field updates and eliminates a separate serial configuration memory in designs that use the device's native configuration features. The wide package pin count also supports numerous user I/Os, but exact I/O counts, voltage standards, differential capabilities, and bank restrictions must be selected from the device's pin-description document for the specific package and bank. Typical uses include communications infrastructure, industrial control, medical equipment, defense systems, video and image processing, storage interfaces, and embedded control planes. The 56,340-cell M2GL050 is particularly useful when a design needs substantially more parallel logic and I/O than small FPGAs provide, while retaining the simplicity of a single-package programmable solution. Design planning should begin with the complete M2GL050 pin-description document, because FG896 package assignments and bank features are device-specific. Designers should also verify voltage-tolerance rules, configuration pins, clock resources, differential-pair constraints, decoupling requirements, thermal performance, and the exact supported I/O standards before committing the 896-ball layout to production. This page combines the verified 56,340-cell, 1.2 V, 896-pin FBGA characteristics with procurement data, ordered replacement candidates, and practical migration guidance. It is intended to help engineers distinguish genuine package-compatible order codes from broader M2GL050 devices that require a different footprint and therefore are not drop-in replacements.

詢價 聯絡我們
M2GL050-FG896I - 56K LE Industrial IGLOO2 FPGA | Microchip
M2GL050-FG896I

M2GL050-FG896I - 56K LE Industrial IGLOO2 FPGA | Microchip

The Microchip Technology M2GL050-FG896I is an IGLOO2 low-density field-programmable gate array with 56,340 logic elements, 377 user I/O, and a 1.2 V core in an 896-ball BGA package. The industrial-temperature suffix identifies it for equipment operating across an extended industrial temperature grade, while the 896-ball package exposes substantial connectivity for parallel buses, bridging, data acquisition, and control logic. An FPGA is a programmable semiconductor whose digital logic is defined after fabrication through a configuration bitstream. Within the semiconductor hierarchy, the M2GL050-FG896I belongs to the low-density IGLOO2 FPGA family. Compared with a fixed-function programmable logic device, an FPGA can implement combinational logic, sequential logic, interfaces, and parallel processing functions in one reconfigurable device. The M2GL050 is intended for general-purpose functions such as bridging, I/O expansion, conversion, system management, and secure connectivity. The principal design strengths of the M2GL050-FG896I are its 56,340 logic elements, 377 I/O positions, and 896-ball package. The large I/O count supports designs that connect multiple external buses or peripherals without requiring several support devices. The low-density IGLOO2 architecture provides a practical balance between programmable logic capacity and board complexity, while on-chip flash allows the configuration to be retained without continuously operating an external configuration memory device. The device belongs to the IGLOO2 low-density FPGA generation and is identified by the manufacturer as being in production. Its 1.2 V core operates from a low-voltage digital supply, while the industrial-grade ordering code supports designs intended for industrial environments. The 896-BGA package also demands careful PCB layout because its dense ball array requires via-in-pad or via-under-bump construction and controlled escape routing to achieve useful board-level performance. Typical applications include industrial protocol bridging, parallel data acquisition, sensor and actuator interfacing, embedded control, system-management logic, and secure connectivity. The 377 I/O positions are especially useful when a design must connect legacy parallel logic to a more compact control structure. The IGLOO2 family also supports reprogrammable hardware that can adapt to different protocols, interface revisions, or field-updatable configurations. For a new board, follow the Microchip IGLOO2 package, power, decoupling, configuration, and high-speed layout guidance exactly. Treat the BGA escape strategy and clean supply distribution as first-order layout constraints rather than late PCB refinements. Firmware and bitstream integration should also follow the device programming and validation requirements documented for the selected IGLOO2 device. This product page combines the exact orderable MPN, package identity, logic-cell count, I/O count, lifecycle indication, comparison options, and application-focused design guidance. It also distinguishes true same-footprint alternatives from related IGLOO2 devices that use different packages and therefore require PCB redesign before they can replace the M2GL050-FG896I.

詢價 聯絡我們
M2GL050-FGG484 - 56K LE IGLOO2 FPGA | Microchip Technology
M2GL050-FGG484

M2GL050-FGG484 - 56K LE IGLOO2 FPGA | Microchip Technology

Microchip Technology M2GL050-FGG484 is a low-density IGLOO2 flash FPGA with 56K logic elements, 56,340 cells, 267 I/O, and a 1.2 V supply in a 484-pin FBGA package. It combines reconfigurable digital logic, programmable I/O, embedded flash configuration memory, and deterministic logic resources in a single package. The manufacturer identifies the M2GL050 family as being in production, while current distributor guidance recommends the M2GL060 for new designs. A field-programmable gate array is a programmable digital semiconductor used to implement control logic, interface conversion, data acquisition, communications, and system-management functions. The M2GL050 belongs to the IGLOO2 low-density FPGA family and is designed for applications requiring flexible hardware configuration, moderate logic capacity, and numerous external I/O. Its 484-ball package supports dense PCB routing without requiring a leaded component. Key device characteristics include 56K logic elements, 56,340 FPGA cells, 267 I/O, a 1.2 V core supply, and a 484-pin FBGA configuration. The 267 available I/O make the device suitable for bridging functions, I/O expansion and conversion, secure connectivity, and general-purpose embedded control. The IGLOO2 family also targets communications, industrial, medical, defense, and aviation equipment. The device uses nonvolatile flash configuration, allowing its programmed logic, I/O assignments, and system parameters to be retained without continuous external configuration storage. This architecture supports field updates and shortened design iterations when requirements change. Designers can implement parallel datapaths, protocol interfaces, state machines, glue logic, and embedded system-management functions in programmable logic rather than relying exclusively on fixed-function devices. Typical implementations include industrial protocol bridges, image and video processing interfaces, dual PCI Express control-plane functions, communications infrastructure, secure connectivity, sensor acquisition, and general-purpose control systems. Its combination of logic capacity and I/O density is particularly useful when a design must connect multiple external buses, converters, memories, or industrial interfaces while retaining reconfigurability. A principal design consideration is lifecycle planning. Although the M2GL050 family remains listed as in production, current distributor guidance directs new designs toward M2GL060. Existing M2GL050-FGG484 platforms should therefore be qualified against device availability, migration requirements, and the lifecycle status appropriate to the intended production program before new schematic commitments are made. This product page combines the manufacturer’s family description, device listings, package and pin-information documentation, migration guidance, and drop-in candidate analysis. It also highlights the distinction between the standard MPN, industrial-grade suffixes, the FG484 package spelling, and the M2GL060 new-design recommendation so engineers can make a more informed sourcing and migration decision.

詢價 聯絡我們
M2GL050-FGG896 - IGLOO2 FPGA 56K LEs, 377 I/O, 896-BGA | Microchip
M2GL050-FGG896

M2GL050-FGG896 - IGLOO2 FPGA 56K LEs, 377 I/O, 896-BGA | Microchip

The Microchip Technology M2GL050-FGG896 is an IGLOO2 low-density flash-based FPGA with 56,340 logic elements, 1,869,824 RAM bits and 377 user I/O, housed in a 896-ball PBGA package that operates from a 1.2 V core supply. An FPGA (field-programmable gate array) is a reconfigurable digital integrated circuit whose logic fabric, interconnect and I/O can be programmed after manufacture. The M2GL050-FGG896 belongs to the IGLOO2 family, a low-density line that combines a fourth-generation flash-based FPGA fabric with high-performance communications interfaces on a single chip. IGLOO2 devices are positioned for general-purpose functions such as bridging, I/O expansion, system management and secure connectivity. Key device attributes include 56,340 logic elements, 1,869,824 RAM bits and 377 user I/O, giving designers very high pin-count density for a single board-level device. The package is an 896-ball PBGA measuring 31 x 31 x 2.44 mm, supplied on a tray, and the core supply voltage is 1.2 V. Microchip lists the M2GL050 family status as In Production, and the part is marked RoHS compliant. The IGLOO2 architecture embeds non-volatile flash configuration memory so the device retains its configuration without an external configuration PROM. Bank-based I/O architecture allows user pins to be grouped into voltage domains for flexible interfacing with mixed-voltage peripherals, and the family includes communications interfaces such as high-speed SERDES blocks in designated banks for link-oriented designs. Typical applications include protocol bridging and bus translation, I/O expansion and pin multiplexing in industrial control equipment, system management and supervisory logic, secure connectivity and encryption acceleration in communications gear, and general-purpose glue logic for industrial, communications and consumer-adjacent equipment. When designing around the M2GL050-FGG896, the large 896-ball footprint demands careful BGA fanout and via-in-pad or via-under-bump escaping on the PCB, plus attention to layer count for the 377 user I/O. Plan the power rails for the 1.2 V core and the peripheral banks separately, and confirm bank-level voltage compatibility in the IGLOO2 packaging and pin descriptions user guide. This page consolidates device specifications, drop-in ordering-code alternatives, pin and packaging guidance, and practical design notes into one engineering reference for the IGLOO2 896-ball family.

詢價 聯絡我們
M2GL050-FGG896I - 56K LEs, 896-BGA Flash FPGA | Microchip
M2GL050-FGG896I

M2GL050-FGG896I - 56K LEs, 896-BGA Flash FPGA | Microchip

The Microchip Technology M2GL050-FGG896I is a low-density IGLOO2 flash field-programmable gate array with 56K logic elements, presented in a square 896-ball BGA package and graded for industrial applications. It combines programmable logic, embedded block RAM, and programmable I/O in a single monolithic FPGA, making it suitable for general-purpose bridging, I/O expansion, signal conversion, system management, and secure connectivity functions. A field-programmable gate array is a semiconductor whose digital logic and I/O are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside complex programmable logic devices and system-on-chip devices. Compared with a fixed application-specific integrated circuit, an FPGA can implement protocols, control logic, and interface functions in parallel hardware while allowing field updates without replacing the component. The M2GL050 device is identified as an IGLOO2 low-density FPGA with 56K logic elements. Its 896-ball BGA interface provides a substantial number of package connections for high pin-count designs, while its flash-based configuration architecture supports nonvolatile programmable behavior. The industrial grade suffix indicates use in industrial temperature environments. The product family is specifically positioned for communications, industrial, and embedded applications requiring programmable logic rather than fixed control hardware. The key engineering benefit is implementation flexibility. Parallel logic resources can perform bridging, data conversion, packet handling, and peripheral control concurrently, reducing the need for several discrete logic devices. Designers can also revise the configuration during development without changing the PCB. The tradeoff is that FPGA designs require constraint definition, timing analysis, programming support, and careful BGA-layout planning rather than only conventional discrete-component assembly. Typical applications include industrial communications adapters, programmable I/O expansion, legacy-interface bridges, protocol converters, embedded control modules, and secure system-management or connectivity functions. The 896-BGA footprint is especially relevant where the design needs many high-speed or parallel I/O connections and can accommodate demanding escape-routing and assembly requirements. For implementation, use the Microchip Libero design flow and the device-specific pin constraints and package information. Place the FPGA according to the recommended land pattern, provide clean power and ground distribution, and complete signal-integrity and thermal validation on the assembled board. Confirm the exact pin, voltage, and timing requirements in the manufacturer datasheet before schematic release. This page combines the M2GL050 family position, package and logic details with direct drop-in substitution guidance and practical implementation considerations. It highlights the M2GL050-FGG896I for designers who need an industrial-grade, flash-based IGLOO2 FPGA in a high-pin-count 896-BGA package.

詢價 聯絡我們
M2GL050-VF400 - 56,340-Cell IGLOO2 FPGA | Microchip Technology
M2GL050-VF400

M2GL050-VF400 - 56,340-Cell IGLOO2 FPGA | Microchip Technology

The Microchip Technology M2GL050-VF400 is an IGLOO2 flash field-programmable gate array (FPGA) with 56,340 logic cells, 207 I/O, and a 400-pin LFBGA package. It is designed for general-purpose programmable-logic functions including bridging, I/O expansion and conversion, system management, secure connectivity, communications, industrial, medical, defense, and aviation systems. The device uses a 1.2 V core supply according to the distributor product description. An FPGA is a programmable semiconductor in which the logic fabric, interconnect, and I/O resources can be configured after manufacture. The IGLOO2 family combines nonvolatile flash configuration storage with a low-cost programmable-logic architecture. Within the product hierarchy, an FPGA is a programmable-logic IC, a semiconductor device, and a flexible alternative to fixed-function logic or ASIC implementations. The M2GL050-VF400 provides 56,340 logic cells, 207 I/O, and a 400-LFBGA package. Its flash-based configuration allows the programmed function to be retained in systems that need repeatable startup behavior. The device is identified by Microchip as being in production, while Mouser lists the exact MPN as not recommended for new designs and recommends M2GL060. This distinction makes the M2GL050-VF400 most relevant to existing designs, maintenance, and qualified programs rather than unrestricted new platform selection. Typical applications include interface bridging, protocol conversion, I/O expansion, industrial control, communications infrastructure, medical equipment, defense systems, and embedded video or image processing. The relatively high I/O count and large 400-ball package support designs requiring numerous external connections and substantial parallel logic capacity. The primary design consideration is migration risk. Existing M2GL050-VF400 boards should use the manufacturer’s Libero design tools and the IGLOO2 pin and packaging documentation. Moving directly to M2GL060 requires verification of package, I/O availability, voltage, timing, resource utilization, and design-tool support. A drop-in replacement cannot be assumed merely because another programmable-logic device uses a similar package. This page combines verified distributor and manufacturer information, practical migration guidance, comparison parameters, and design considerations to help engineers identify whether the M2GL050-VF400 remains appropriate for an existing design and when a planned migration to a newer device is preferable.

詢價 聯絡我們
M2GL050-VF400I - 56K LE IGLOO2 FPGA | Microchip
M2GL050-VF400I

M2GL050-VF400I - 56K LE IGLOO2 FPGA | Microchip

The Microchip Technology M2GL050-VF400I is an IGLOO2 low-density flash field-programmable gate array with 56K logic elements, 207 I/Os, and a 400-LFBGA package. It combines reprogrammable logic, embedded flash configuration memory, and 207 user I/Os in a single surface-mount device for compact control, interface, bridging, and signal-processing systems. The manufacturer lists the M2GL050 device family as in production. An FPGA is a programmable digital semiconductor in which system-level functions are implemented through configurable logic blocks, routing resources, and programmable I/O. Within the product hierarchy, an FPGA is a programmable logic device and belongs to the broader semiconductor category. Unlike a fixed-function microcontroller, an FPGA can support parallel data paths, hardware-assisted protocol handling, custom interface conversion, and logic functions implemented with deterministic hardware timing. The M2GL050-VF400I provides 56K logic elements and 207 I/Os in the 400-LFBGA package, making it suitable for designs requiring substantial digital connectivity in a compact land pattern. Its flash-programmable architecture allows configuration data to be retained in the device, supporting field updates without a separate external configuration PROM. The exact core voltage, I/O standards, memory configuration, and performance figures should be selected from the IGLOO2 electrical tables using the device's specific I/O bank assignments. Microchip positions IGLOO2 devices for general-purpose functions including bridging, I/O expansion and conversion, system management, secure connectivity, communications, industrial, medical, defense, and aviation systems. The 207-I/O count is especially useful for parallel sensor acquisition, industrial data concentration, legacy peripheral interfacing, and custom control fabrics where multiple independent digital signals must be supported. Typical implementations include industrial communication adapters, image and video processing front ends, medical and diagnostic equipment, defense and aviation control modules, secure system-management controllers, and PCI Express control-plane functions. The 400-LFBGA package also allows a dense pin count, but its fine pitch demands careful escape routing, multilayer PCB construction, and assembly-process control. Designers should assign I/O standards only to banks whose voltage and pin capabilities support them, and should follow the IGLOO2 packaging and pin-description guide when creating the footprint and escape-routing layers. Power, ground, configuration, and programming signals also require the layout and decoupling recommendations in the manufacturer documentation. Industrial temperature behavior and production qualification should be confirmed against the ordered device suffix and lifecycle record. This page combines the manufacturer device-page information with distributor channel records, package identification, practical architecture guidance, and qualified drop-in candidates. It is intended to help engineers evaluate footprint reuse, sourcing continuity, programming constraints, and application fit before committing the M2GL050-VF400I to a new design.

詢價 聯絡我們
M2GL050-VFG400 - 207-I/O Flash FPGA | Microchip Technology
M2GL050-VFG400

M2GL050-VFG400 - 207-I/O Flash FPGA | Microchip Technology

The Microchip Technology M2GL050-VFG400 is a low-density IGLOO 2 flash FPGA with 207 user I/O, a 1.14 V to 2.625 V core-supply range, and a 400-ball LFBGA package. It belongs to the IGLOO 2 family of cost-optimized, nonvolatile FPGAs designed for general-purpose logic, bridging, I/O expansion, data conversion, system management, and secure connectivity applications. The VF400 package provides a high pin count for designs that require extensive parallel connectivity in a compact surface-mount footprint. An FPGA is a programmable semiconductor whose configurable logic fabric and I/O blocks implement digital functions after programming. Within the semiconductor hierarchy, an FPGA sits above programmable logic devices and alongside fixed-function logic, interface ICs, and processors. Microchip positions the IGLOO 2 family for cost-sensitive designs requiring nonvolatile configuration, broad I/O availability, and configurable logic rather than the fixed function set of an application-specific standard product. Key device characteristics include 207 I/O, a 1.14 V minimum core supply, and a 2.625 V maximum core supply. The listed operating-temperature range is 0°C to 85°C based on the junction-temperature notation associated with the commercial-temperature ordering code. On-chip flash allows the FPGA configuration to be retained without a separate configuration PROM. The manufacturer identifies the device family as in production, while distributor availability information identifies M2GL050-VFG400 as not recommended for new designs and directs users toward M2GL060. The fourth-generation flash-based FPGA fabric integrates programmable logic with communications-oriented interfaces on one device. Its 400-LFBGA package exposes 207 I/O, making the M2GL050-VFG400 useful where an interface bridge must translate protocols or voltage domains, expand I/O, or consolidate control logic without using several fixed-function devices. The extensive I/O count also permits parallel sensor acquisition, data-format conversion, and system supervisory functions. Typical applications include communications infrastructure, industrial control systems, medical equipment, defense platforms, aviation electronics, bridging functions, I/O expansion, video or image processing, system management, and secure connectivity. These uses align with the IGLOO 2 family's low-density positioning and with the need for programmable logic that can be adapted across product variants. Designers should begin with the VF400 pin-description guide and the IGLOO 2 migration application note before assigning PCB tracks. Validate every power rail, configuration interface, clock, and high-speed I/O against the package data. For new projects, review M2GL060 because Microchip's product positioning identifies it as the recommended successor to this device. This product guide combines manufacturer device information, lifecycle guidance, same-footprint alternatives, and migration-focused engineering notes. It is intended to help engineers identify the correct VF400 variant, distinguish commercial and industrial ordering codes, and determine whether an existing M2GL050-VFG400 design can be maintained or should be transitioned.

詢價 聯絡我們
M2GL050-VFG400I - 56KLE 400-Ball IGLOO2 FPGA | Microchip
M2GL050-VFG400I

M2GL050-VFG400I - 56KLE 400-Ball IGLOO2 FPGA | Microchip

The Microchip Technology M2GL050-VFG400I is an IGLOO2 flash-based field-programmable gate array with 56K logic elements, 207 I/O, and a 400-LFBGA package. It provides reconfigurable programmable logic for general-purpose functions including bridging, I/O expansion, system management, secure connectivity, communications, and industrial control. The device combines programmable logic, embedded memory resources, and configurable I/O in one integrated FPGA package. An FPGA is a digital semiconductor whose logic and interconnect resources can be configured after manufacture. In the product hierarchy, an FPGA belongs to programmable logic devices and sits above fixed-function logic ICs. Unlike a mask-programmed ASIC, an FPGA allows field updates and is therefore useful when interfaces, control paths, or product configurations may evolve. The M2GL050 belongs to Microchip's IGLOO2 family of flash FPGA devices. The M2GL050-VFG400I provides 56K logic elements and 207 I/O in a 400-ball LFBGA package. Its flash configuration technology supports a reusable, nonvolatile program configuration and avoids the need for a separate configuration memory device. The high pin count provides extensive I/O connectivity for parallel buses, converters, memory interfaces, communications links, and control systems. The industrial-temperature suffix identifies the grade intended for extended industrial operating conditions. Its 400-LFBGA construction places a large number of connections in a compact square package. This supports designs that require many signal paths but limits accessibility during prototype assembly and inspection. Unlike a small QFP, the LFBGA has contacts beneath the device rather than exposed leads around its perimeter. Board designers must follow the manufacturer's package, land-pattern, power, ground, and high-speed routing requirements. Typical applications include industrial interface conversion, communication bridges, secure connectivity, data acquisition, embedded control, protocol translation, and general-purpose programmable-logic modules. The 207 available I/O are especially useful when a design must connect multiple buses, sensors, converters, or external memory devices. The 56K logic-element density supports moderate parallel-processing, control, and interface-conversion workloads without moving to a larger FPGA. Design planning should account for the BGA assembly process, differential-pair routing, clean supply rails, decoupling, and thermal performance. Because the package exposes 400 balls beneath the device, inspection after soldering is difficult, so manufacturing yield and board assembly capability should be validated early. Use the Microchip IGLOO 2 Packaging and Pin Descriptions User Guide when assigning balls, power rails, and I/O standards. This product page consolidates the exact device identity, package details, pin-compatible same-family options, sourcing parameters, and application-oriented design guidance. It is intended to support engineering selection, footprint planning, lifecycle assessment, and replacement decisions without obscuring the distinctions between speed, temperature, and package-ordering suffixes.

詢價 聯絡我們
M2GL050T-FCS325 - 56K LEs, 200 I/O IGLOO2 FPGA | Microchip
M2GL050T-FCS325

M2GL050T-FCS325 - 56K LEs, 200 I/O IGLOO2 FPGA | Microchip

The Microchip Technology M2GL050T-FCS325 is a 56K logic-element IGLOO2 flash FPGA with 200 I/O in a 325-TFBGA FCBGA package. The device combines programmable logic, embedded flash configuration memory, and 200 user I/O in a single surface-mount package, making it suitable for compact control, interface, bridging, and connectivity systems. An FPGA is a reconfigurable digital semiconductor whose logic blocks and programmable I/O can be configured after manufacture. IGLOO2 belongs to Microchip's low-density flash FPGA family, combining a programmable logic array, embedded configuration memory, and I/O resources in one device. This places the M2GL050T-FCS325 within the hierarchy FPGA → reconfigurable logic → programmable semiconductor. The device provides 56K logic elements and 200 I/O, offering substantial connectivity for parallel data paths, control logic, and mixed interface designs. Its flash configuration technology allows the programmed design to be stored on the FPGA without requiring a separate configuration PROM. The 325-TFBGA package also supports high-density board integration while presenting demanding fine-pitch layout and manufacturing requirements. Microchip positions the M2GL050 family for general-purpose functions including bridging, I/O expansion, data conversion, system management, and secure connectivity. The M2GL050T-FCS325 is specifically listed as not recommended for new design, with M2GL060 identified as the recommended successor. Existing designs can continue to use the original part when qualification and lifecycle requirements permit, but new projects should evaluate the recommended family. Typical applications include industrial bridge and protocol-conversion equipment, embedded control systems, communications interfaces, and secure connectivity modules. The 56K logic-element array can implement control and datapath functions, while the 200 I/O supports external buses, converters, and supervisory signals. Product designers must still verify interface timing, voltage compatibility, power requirements, and FPGA resource utilization against their target system. For PCB implementation, use the IGLOO2 Packaging and Pin Descriptions User Guide and the device-specific pin information to assign every ball. A 325-TFBGA layout requires careful escape routing, thermal via placement, and assembly-process control; verify the exposed-connection and ball requirements against the official package drawing before fabrication. This page combines the 56K logic-element and 200-I/O architecture, lifecycle guidance, same-package alternatives, comparison details, and practical migration considerations to support engineering selection and legacy design maintenance.

詢價 聯絡我們
M2GL050T-FG484 - 56340-Cell 1.2V Flash FPGA | Microchip
M2GL050T-FG484

M2GL050T-FG484 - 56340-Cell 1.2V Flash FPGA | Microchip

Microchip M2GL050T-FG484 is a flash-based IGLOO2 field-programmable gate array with 56,340 logic cells, 267 I/O, a 1.2 V core supply, and a 484-ball FBGA package. The device combines reconfigurable programmable logic with embedded non-volatile flash memory for instant-on operation, making it suitable for bridging, I/O expansion, data conversion, system management, and secure connectivity functions. An FPGA is a programmable semiconductor whose logic, routing, and I/O resources can be configured after manufacture. The M2GL050 belongs to the IGLOO2 hierarchy of flash FPGAs, a device family positioned between simple programmable logic and larger programmable SoC products. Its flash configuration architecture retains the programmed design in non-volatile memory, allowing the circuit to begin operation without loading a separate configuration file into volatile memory at every power cycle. The principal device characteristics include 56,340 logic cells, 267 available I/O in the referenced ordering information, and a 1.2 V operating core voltage. These resources support interfaces, control logic, protocol bridges, and data-format conversion while retaining the operational flexibility associated with reprogrammable hardware. The 484-FBGA package provides a high pin count for systems requiring extensive parallel connectivity. As an IGLOO2 device, the M2GL050T-FG484 supports general-purpose programmable functions across communications, industrial, medical, defense, and aviation systems. Its non-volatile configuration is especially useful where rapid startup, deterministic system availability, or field reconfiguration is more important than the flexibility of a soft microcontroller core. The high-I/O package also makes the device relevant to complex board-level interconnect and signal-conversion designs. Typical applications include general-purpose bridging functions, input/output expansion, data-format conversion, system management, secure connectivity, and control-plane logic. The same device family is also used in communications equipment, industrial controllers, medical systems, and defense or aviation platforms where programmable post-deployment updates and compact logic integration are valuable. The principal design consideration is package and I/O verification. Because the device uses a 484-ball FBGA with 267 listed I/O, the board layout must follow the manufacturer's ball map, power, configuration, and decoupling guidance. A design should also confirm that its clocking, supported I/O standards, voltage requirements, and programming method satisfy the selected IGLOO2 device before schematic or PCB release. This page consolidates device-family positioning, verified ordering information, practical application guidance, drop-in alternatives, and engineering-focused comparisons. It helps designers separate logic-capacity, package, speed-grade, and temperature-grade differences before committing a 484-ball programmable-logic design to production.

詢價 聯絡我們
M2GL050T-FG896 - 56K LEs, 377 I/O, 896-BGA IGLOO2 FPGA
M2GL050T-FG896

M2GL050T-FG896 - 56K LEs, 377 I/O, 896-BGA IGLOO2 FPGA

Microchip Technology M2GL050T-FG896 is an IGLOO2 flash FPGA with 56K logic elements, 377 I/O, and an 896-ball BGA package. It is designed for general-purpose programmable logic, bridging, I/O expansion and conversion, system management, secure connectivity, Gigabit Ethernet or dual PCI Express control-plane processing, and video or image processing applications. An FPGA is a semiconductor device whose digital logic is defined after fabrication by loading a configuration bitstream into embedded flash memory. Within the programmable-logic hierarchy, the IGLOO2 family occupies the position of a low-density FPGA, combining configurable logic, memory, fixed peripherals, and programmable I/O in one device. This integration allows engineers to consolidate interface logic that might otherwise require multiple programmable or fixed-function components. The M2GL050T-FG896 provides 56K logic elements and 377 I/O in a compact 896-BGA package, giving it unusually high pin availability for a device of this logic density. Its flash-based configuration architecture supports a nonvolatile program-and-use workflow. Microchip positions the M2GL050T family for general-purpose functions including bridging, input/output expansion and conversion, system management, and secure connectivity. For communications-oriented designs, the family is also identified for Gigabit Ethernet and dual PCI Express control-plane implementations. Those use cases benefit from combining parallel interface logic and protocol-handling functions in a single programmable device. For image and video processing, the logic fabric can implement parallel datapaths, timing controllers, and interface conversion without requiring a separate ASIC for moderate-volume designs. The 896-BGA package supports dense PCB routing but requires careful escape-routing, via, solder-mask, and assembly planning. Because many signals terminate at fine-pitch balls, designers should use the manufacturer pinout and recommended land pattern before defining a footprint. Power delivery and ground distribution are equally important because a large programmable device can create high simultaneous switching activity across its logic, memory, and I/O resources. The principal design trade-off is package complexity. A 377-I/O device offers extensive connectivity, but it requires an advanced PCB stack-up, disciplined power planning, and assembly capability suited to large BGAs. Prototype work should therefore account for X-ray inspection, thermal analysis, programming access, and manufacturing yield rather than treating the package as a conventional leaded component. This page organizes the exact device identity, package information, sourcing guidance, application fit, and engineering considerations into a focused engineering reference. It also distinguishes verified same-package family alternatives from options requiring different packages and highlights the constraints that matter when deciding whether a board can be reused without modification.

詢價 聯絡我們