A4980KLPTR-T vs A3977SLPTR-T 比較

詳細並排比較 A4980KLPTR-T 由 Allegro MicroSystems 與 A3977SLPTR-T 由 Allegro MicroSystems. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Allegro MicroSystems
A4980KLPTR-T A4980KLPTR-T - 28V 1.4A Bipolar Stepper Driver, TSSOP-28EP | Allegro

A4980KLPTR-T - 28V 1.4A Bipolar Stepper Driver, TSSOP-28EP | Allegro

A4980KLPTR-T ✓ 啟用中
Allegro MicroSystems
A3977SLPTR-T A3977SLPTR-T - 35V/±2.5A Microstepping DMOS Driver | Allegro MicroSystems

A3977SLPTR-T - 35V/±2.5A Microstepping DMOS Driver | Allegro MicroSystems

A3977SLPTR-T ✓ 啟用中

規格比較

參數 A4980KLPTR-T A3977SLPTR-T
品牌 Allegro MicroSystems Allegro MicroSystems
類別 Motor Drivers Motor Drivers
生命週期狀態 啟用中 啟用中
Motor Type Bipolar stepper Bipolar stepper motor
Step Resolution Full, 1/2, 1/4, 1/16 microstep —
Motor Supply Voltage (max) 28 V —
Output Current per Phase (peak) ±1.4 A —
Output Current per Phase (continuous, typical) ±750 mA —
Low-side RDS(on) 0.5 Ω typical —
Output Stage DMOS with synchronous rectification —
Control Interface Step/Direction + SPI-compatible serial —
Current Decay Modes Automatic selection of Mixed, Fast, Slow —
Shoot-through Protection Yes, internal timers —
Output Short-circuit Protection Yes —
Stalled Rotor Detection Yes (flag via SPI) —
Low-load-current Detection Yes (flag via SPI) —
封裝 28-pin TSSOP with exposed thermal pad (KLP) 28-pin TSSOP-EP (exposed pad)
安裝類型 Surface Mount Surface Mount
工作溫度範圍 [DATA_NEEDED: operating temperature range] —
AEC-Q100 Automotive Grade Automotive qualified (per datasheet title) —
RoHS 狀態 Compliant Compliant
Tape & Reel Quantity 4000 per reel (T suffix) —
Step Modes — Full, half, quarter, eighth
輸出配置 — Dual full H-bridge (2 outputs)
Load Voltage (Motor Supply) — 8 V to 35 V
Logic Supply Voltage — 3 V to 5.5 V
Output Current (per phase) — ±2.5 A
Maximum Output Voltage Rating — 35 V
rDS(on) - Source DMOS (typical) — 0.45 ohm
rDS(on) - Sink DMOS (typical) — 0.36 ohm
Current Control — Fixed off-time PWM with slow/fast/mixed decay
同步整流 — Yes (internal)
Sleep Mode — Yes (low-power)
Automatic Decay Mode Selection — Yes
工作溫度 — -20 C to +85 C

資料表與資源

瀏覽所有產品 建立 BOM 索取報價