ADM485AR vs ADM485ARZ 比較
詳細並排比較 ADM485AR 由 Analog Devices 與 ADM485ARZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ 啟用中規格比較
| 參數 | ADM485AR | ADM485ARZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Differential line transceiver | — |
| Supported Standards | EIA RS-485 and RS-422 | — |
| 供應電壓 | 5 V | 5 V (single supply) |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Communication Mode | High-speed bidirectional | — |
| Bus Architecture | Multipoint balanced transmission line | — |
| Driver and Receiver Enable | Driver and receiver can be enabled | — |
| Signal Type | Differential balanced signaling | — |
| Logic Interface | [DATA_NEEDED: logic input and output voltage levels] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Differential Driver Output | [DATA_NEEDED: differential output voltage and current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| 封裝 | 8-pin SOIC | SOIC-8 (SO-8) / SO-8 |
| 安裝類型 | [DATA_NEEDED: surface-mount or through-hole mounting] | Surface Mount |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | [DATA_NEEDED: ESD HBM rating] |
| RoHS | unknown | — |
| REACH | unknown | — |
| AEC-Q100 | unknown | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| 資料速率 | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| RoHS 狀態 | — | Compliant |
| REACH Status | — | Unaffected |
| MSL 等級 | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |