AK5394AVS vs AK5385BVS 比較

詳細並排比較 AK5394AVS 由 AKM (Asahi Kasei Microdevices) 與 AK5385BVS 由 AKM (Asahi Kasei Microdevices). 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

AKM (Asahi Kasei Microdevices)
AK5394AVS AK5394AVS - 24-bit 192kHz 123dB ADC | AKM (Asahi Kasei)

AK5394AVS - 24-bit 192kHz 123dB ADC | AKM (Asahi Kasei)

AK5394AVS Obsolete
AKM (Asahi Kasei Microdevices)
AK5385BVS AK5385BVS - 24-Bit Stereo Audio ADC | Asahi Kasei

AK5385BVS - 24-Bit Stereo Audio ADC | Asahi Kasei

AK5385BVS ✓ 啟用中

規格比較

參數 AK5394AVS AK5385BVS
品牌 AKM (Asahi Kasei Microdevices) AKM (Asahi Kasei Microdevices)
類別 ADC/DAC ADC/DAC
生命週期狀態 Obsolete 啟用中
Manufacturer AKM (Asahi Kasei Microdevices) —
Part Number AK5394AVS —
解析度 24-bit 24 bit
Number of Channels 2 (stereo) 2 channels
取樣率 1 kHz to 216 kHz —
Maximum Sampling Rate 192 kHz 192 kHz
Dynamic Range 123 dB (A-weighted, typical) —
Modulator Architecture Advanced multi-bit delta-sigma Enhanced Dual Bit
Output Interface Serial audio data (I2S-compatible) Serial
Analog Supply Voltage 4.75 V to 5.25 V (5 V ±5%) —
Digital Supply Voltage 3 V to 5.25 V —
Power Dissipation 665 mW (typical) —
Stopband Attenuation 120 dB (decimation filter) —
Passband Ripple 0.001 dB (decimation filter) —
Digital HPF Yes (with offset calibration) —
封裝 28-pin SOP (7.50 mm / 0.295" width) 28-SOP
安裝類型 Surface Mount Surface Mount
工作溫度 [DATA_NEEDED: operating temperature range] —
RoHS 狀態 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Pin Compatibility Note Semi-pin-compatible with AK5392 / AK5393 (per manufacturer datasheet) —
Converter Type — Stereo audio analog-to-digital converter
Sampling Rate Range — 8 kHz to 216 kHz
Analog Supply Voltage Range — 3 V to 5.25 V
Digital Supply Voltage Range — 4.75 V to 5.25 V
Device Category — Data Acquisition, ADCs/DACs, Special Purpose
Signal Type — Analog audio input
Application Class — High-end audio systems
REACH Status — [DATA_NEEDED: REACH status]
工作溫度範圍 — [DATA_NEEDED: operating temperature range]
Clock Frequency — [DATA_NEEDED: clock frequency]
Signal-to-Noise Ratio — [DATA_NEEDED: signal-to-noise ratio]
Total Harmonic Distortion — [DATA_NEEDED: total harmonic distortion]
Power Consumption — [DATA_NEEDED: power consumption]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價