ATSAMD21G18A-MF vs ATSAMD21-XPRO 比較
詳細並排比較 ATSAMD21G18A-MF 由 Microchip Technology 與 ATSAMD21-XPRO 由 Microchip Technology. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Microchip Technology
ATSAMD21G18A-MF - 48MHz Cortex-M0+ MCU, 256KB Flash | Microchip
ATSAMD21G18A-MF ✓ 啟用中Microchip Technology
ATSAMD21-XPRO - SAM D21 Xplained Pro ARM Cortex-M0+ Eval Board
ATSAMD21-XPRO ✓ 啟用中規格比較
| 參數 | ATSAMD21G18A-MF | ATSAMD21-XPRO |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 類別 | Microcontrollers | Development Boards |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Core | ARM Cortex-M0+ (ARMv6-M) | — |
| Maximum CPU Clock | 48 MHz | — |
| CoreMark Performance | 2.46 CoreMark/MHz | — |
| Flash Memory | 256 KB | — |
| SRAM | 32 KB | 32 KB |
| Supply Voltage Range | 1.62 V to 3.63 V | — |
| 工作溫度範圍 | -40 C to +125 C (industrial) | — |
| ADC | 12-bit, 12 channels, up to 350 ksps | — |
| DAC | 10-bit, 1 channel | — |
| SERCOM Channels | 6 (configurable as UART/SPI/I2C) | — |
| I2S Interfaces | 2 | — |
| USB Interface | USB 2.0 Full-Speed device/host/OTG | — |
| Timers/Counters | 8 (including 24-bit TCC) | — |
| 封裝 | 48-pin QFN (7x7 mm) with exposed pad | — |
| 安裝類型 | Surface Mount | — |
| MSL 等級 | 3 (168 hours) | — |
| RoHS 狀態 | Compliant | Compliant |
| Product Type | — | Evaluation Board (Xplained Pro) |
| Target MCU | — | ATSAMD21J18A |
| Core Processor | — | ARM Cortex-M0+ 32-bit |
| CPU Max Frequency | — | 48 MHz |
| Flash Memory (on-chip) | — | 256 KB |
| On-board SPI Flash | — | 1 MB |
| Low-frequency Crystal | — | 32.768 kHz |
| High-frequency Crystal | — | 12 MHz |
| Debug Interface | — | nEDBG (CMSIS-DAP) on-board |
| USB Connectors | — | 1x Micro-B (debug/CDC), 1x Micro-B (target) |
| Extension Headers | — | 3x 20-pin Xplained Pro (compatible with I/O1, OLED1, QT1, PROTO1) |
| User Inputs | — | 1x mechanical reset button, 1x user touch button |
| User Outputs | — | 1x user LED |
| Arduino-compatible Headers | — | Yes (subset of ATSAMD21J18A I/O) |
| Operating Voltage (target) | — | 3.3 V |
| Board Power Source | — | USB Micro-B |
| Supported IDEs | — | MPLAB X IDE, Atmel Studio 7, Atmel START |
| Form Factor | — | Xplained Pro standard (approx 88 mm x 53 mm) |